- 05 Oct, 2014 40 commits
-
-
Thomas Hellstrom authored
commit f01ea0c3 upstream. The code waiting for fifo idle was incorrect and could possibly spin forever under certain circumstances. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reported-by:
Mark Sheldon <markshel@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Reivewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Russell King authored
commit d9fdb9fb upstream. When trying to unbind imx-drm, the following oops was observed from the imx-ldb driver: Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = de954000 [0000001c] *pgd=2e92c831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: bnep rfcomm bluetooth nfsd exportfs hid_cypress brcmfmac brcmutil snd_soc_fsl_ssi snd_soc_fsl_spdif imx_pcm_fiq imx_pcm_dma imx_ldb(C) imx_thermal imx_sdma imx2_wdt snd_soc_sgtl5000 snd_soc_imx_sgtl5000 snd_soc_imx_spdif snd_soc_imx_audmux CPU: 1 PID: 1228 Comm: bash Tainted: G C 3.16.0-rc2+ #1229 task: ea378d80 ti: de948000 task.ti: de948000 PC is at imx_ldb_unbind+0x1c/0x58 [imx_ldb] LR is at component_unbind+0x38/0x70 pc : [<bf025068>] lr : [<c0353108>] psr: 200f0013 sp : de949da8 ip : de949dc0 fp : de949dbc r10: e9a44b0c r9 : 00000000 r8 : de949f78 r7 : 00000012 r6 : e9b3f400 r5 : e9b133b8 r4 : e9b13010 r3 : 00000000 r2 : e9b3f400 r1 : ea9a0210 r0 : e9b13020 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 2e95404a DAC: 00000015 Process bash (pid: 1228, stack limit = 0xde948240) Stack: (0xde949da8 to 0xde94a000) ... Backtrace: [<bf02504c>] (imx_ldb_unbind [imx_ldb]) from [<c0353108>] (component_unbind+0x38/0x70) [<c03530d0>] (component_unbind) from [<c03531d4>] (component_unbind_all+0x94/0xc8) [<c0353140>] (component_unbind_all) from [<c04bc224>] (imx_drm_driver_unload+0x34/0x4c) [<c04bc1f0>] (imx_drm_driver_unload) from [<c03394a4>] (drm_dev_unregister+0x2c/0xa0) [<c0339478>] (drm_dev_unregister) from [<c0339f8c>] (drm_put_dev+0x30/0x6c) [<c0339f5c>] (drm_put_dev) from [<c04bc1cc>] (imx_drm_unbind+0x14/0x18) [<c04bc1b8>] (imx_drm_unbind) from [<c03530b4>] (component_master_del+0xbc/0xd8) ... Code: e5904058 e2840010 e2845fea e59430a0 (e593301c) ---[ end trace 4f211c6dbbcd4963 ]--- This is caused by only having one channel out of the pair configured in DT; the second channel remains uninitialised, but upon unbind, the driver attempts to clean up both, thereby dereferencing a NULL pointer. Avoid this by checking that the second channel is initialised. Fixes: 1b3f7675 ("imx-drm: initialise drm components directly") Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Russell King authored
commit 3a44a205 upstream. When unbinding imx-drm, the following oops was observed: Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = e995c000 [00000004] *pgd=4fea5831 Internal error: Oops: 817 [#1] SMP ARM Modules linked in: bnep rfcomm bluetooth nfsd exportfs hid_cypress brcmfmac brcmutil snd_soc_fsl_ssi snd_soc_fsl_spdif imx_pcm_fiq imx_pcm_dma snd_soc_sgtl5000 imx_sdma imx2_wdt imx_ldb(C) imx_thermal snd_soc_imx_sgtl5000 snd_soc_imx_spdif snd_soc_imx_audmux CPU: 1 PID: 779 Comm: bash Tainted: G C 3.16.0-rc2+ #1230 task: ea9eb180 ti: ea378000 task.ti: ea378000 PC is at ipu_dp_put+0x10/0x18 LR is at ipu_plane_dpms+0x60/0x8c pc : [<c0350d20>] lr : [<c04bd9e8>] psr: 200f0013 sp : ea379d80 ip : ea379d90 fp : ea379d8c r10: 00100100 r9 : 00000000 r8 : 00200200 r7 : e9ba0264 r6 : e9ba01f8 r5 : 00000000 r4 : ea34b800 r3 : 00000000 r2 : 00000000 r1 : 0000009b r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 3995c04a DAC: 00000015 Process bash (pid: 779, stack limit = 0xea378240) Stack: (0xea379d80 to 0xea37a000) ... Backtrace: [<c0350d10>] (ipu_dp_put) from [<c04bd9e8>] (ipu_plane_dpms+0x60/0x8c) [<c04bd988>] (ipu_plane_dpms) from [<c04bda40>] (ipu_disable_plane+0x2c/0x60) [<c04bda14>] (ipu_disable_plane) from [<c04bda9c>] (ipu_plane_destroy+0x28/0x60) [<c04bda74>] (ipu_plane_destroy) from [<c033ff84>] (drm_mode_config_cleanup+0x1b8/0x250) [<c033fdcc>] (drm_mode_config_cleanup) from [<c04bc234>] (imx_drm_driver_unload+0x44/0x4c) [<c04bc1f0>] (imx_drm_driver_unload) from [<c03394a4>] (drm_dev_unregister+0x2c/0xa0) [<c0339478>] (drm_dev_unregister) from [<c0339f8c>] (drm_put_dev+0x30/0x6c) [<c0339f5c>] (drm_put_dev) from [<c04bc1cc>] (imx_drm_unbind+0x14/0x18) [<c04bc1b8>] (imx_drm_unbind) from [<c03530b4>] (component_master_del+0xbc/0xd8) ... Code: e1a0c00d e92dd800 e24cb004 e3a03000 (e5c03004) This is caused by a missing check in ipu_plane_dpms for a NULL pointer. Fixes: b8d181e4 ("staging: drm/imx: add drm plane support") Signed-off-by:
-
Y.C. Chen authored
commit 83502a5d upstream. Type error and cause AST2000 cannot be detected correctly Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by:
Egbert Eich <eich@suse.de> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Y.C. Chen authored
commit 8f372e25 upstream. Some config settings like 3rd TX chips will not get correctly if the extended reg is protected Signed-off-by:
-
Brad Volkin authored
commit 22cb99af upstream. Ring init and cleanup are not balanced because we re-init the rings on resume without having cleaned them up on suspend. This leads to the driver leaking the parser's hash tables with a kmemleak signature such as this: unreferenced object 0xffff880405960980 (size 32): comm "systemd-udevd", pid 516, jiffies 4294896961 (age 10202.044s) hex dump (first 32 bytes): d0 85 46 c0 ff ff ff ff 00 00 00 00 00 00 00 00 ..F............. 98 60 28 04 04 88 ff ff 00 00 00 00 00 00 00 00 .`(............. backtrace: [<ffffffff81816f9e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811fa678>] kmem_cache_alloc_trace+0x168/0x2f0 [<ffffffffc03e20a5>] i915_cmd_parser_init_ring+0x2a5/0x3e0 [i915] [<ffffffffc04088a2>] intel_init_ring_buffer+0x202/0x470 [i915] [<ffffffffc040c998>] intel_init_vebox_ring_buffer+0x1e8/0x2b0 [i915] [<ffffffffc03eff59>] i915_gem_init_hw+0x2f9/0x3a0 [i915] [<ffffffffc03f0057>] i915_gem_init+0x57/0x1d0 [i915] [<ffffffffc045e26a>] i915_driver_load+0xc0a/0x10e0 [i915] [<ffffffffc02e0d5d>] drm_dev_register+0xad/0x100 [drm] [<ffffffffc02e3b9f>] drm_get_pci_dev+0x8f/0x200 [drm] [<ffffffffc03c934b>] i915_pci_probe+0x3b/0x60 [i915] [<ffffffff81436725>] local_pci_probe+0x45/0xa0 [<ffffffff81437a69>] pci_device_probe+0xd9/0x130 [<ffffffff81524f4d>] driver_probe_device+0x12d/0x3e0 [<ffffffff815252d3>] __driver_attach+0x93/0xa0 [<ffffffff81522e1b>] bus_for_each_dev+0x6b/0xb0 This patch extends the current convention of checking whether a resource is already allocated before allocating it during ring init. Longer term it might make sense to only init the rings once. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83794Tested-by:
Kari Suvanto <kari.tj.suvanto@gmail.com> Signed-off-by:
Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Jani Nikula authored
commit c84db770 upstream. Check the correct bit for audio. Seems like a copy-paste error from the start: commit 9ed109a7 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Apr 24 23:54:52 2014 +0200 drm/i915: Track has_audio in the pipe config Reported-by:
Martin Andersen <martin.x.andersen@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82756 Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Ville Syrjälä authored
commit 7a98948f upstream. The vblank waits in intel_tv_detect_type() are timing out for some reason. This is a regression caused removing seemingly useless vblank waits from the modeset seqeuence in: commit 56ef52ca Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Thu May 8 19:23:15 2014 +0300 drm/i915: Kill vblank waits after pipe enable on gmch platforms So it turns out they weren't all entirely useless. Apparently the pipe has to go through one full frame before we enable the TV port. Add a vblank wait to intel_enable_tv() to make sure that happens. Another approach was attempted by placing the vblank wait just after enabling the port. The theory behind that attempt was that we need to let the port stay enabled for one full frame before disabling it again during load detection. But that didn't work, and we definitely must have the vblank wait before enabling the port. Cc: Alan Bartlett <ajb@elrepo.org> Tested-by:
Alan Bartlett <ajb@elrepo.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79311Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit 2232f031 upstream. In commit 1f83fee0 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Nov 15 17:17:22 2012 +0100 drm/i915: clear up wedged transitions I've accidentally inverted the EIO/wedged handling in the fault handler: We want to return the EIO as a SIGBUS only if it's not because of the gpu having died, to prevent userspace from unduly dying. In my defence the comment right above is completely misleading, so fix both. v2: Drop the WARN_ON, it's not actually a bug to e.g. receive an -EIO when swap-in fails. v3: Don't remove too much ... oops. Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
-
Ville Syrjälä authored
commit bbfb44e8 upstream. When intel_tv_detect() fails to do load detection it would forget to drop the locks and clean up the acquire context. Fix it up. This is a regression from: commit 208bf9fd Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Aug 11 13:15:35 2014 +0300 drm/i915: Fix locking for intel_enable_pipe_a() v2: Make the code more readable (Chris) v3: Drop WARN_ON(type < 0) (Chris) Cc: Tibor Billes <tbilles@gmx.com> Reported-by:
Tibor Billes <tbilles@gmx.com> Tested-by:
-
Mathias Krause authored
commit bbe1c274 upstream. The __init annotations for the DMI callback functions are wrong as this code can be called even after the module has been initialized, e.g. like this: # echo 1 > /sys/bus/pci/devices/0000:00:02.0/remove # modprobe i915 # echo 1 > /sys/bus/pci/rescan The first command will remove the PCI device from the kernel's device list so the second command won't see it right away. But as it registers a PCI driver it'll see it on the third command. If the system happens to match one of the DMI table entries we'll try to call a function in long released memory and generate an Oops, at best. Fix this by removing the bogus annotation. Modpost should have caught that one but it ignores section reference mismatches from the .rodata section. :/ Fixes: 25e341cf ("drm/i915: quirk away broken OpRegion VBT") Fixes: 8ca4013d ("CHROMIUM: i915: Add DMI override to skip CRT...") Fixes: 425d244c ("drm/i915: ignore LVDS on intel graphics systems...") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jarod Wilson <jarod@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> # Can modpost be fixed? Signed-off-by:
-
Scot Doyle authored
commit dfb3d47b upstream. commit c675949e Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Apr 9 11:31:37 2014 +0300 drm/i915: do not setup backlight if not available according to VBT prevents backlight setup on the Acer C720 (Core i3 4005U CPU), which has a misconfigured VBT. Apply quirk to ignore the VBT backlight presence check during backlight setup. Signed-off-by:
Scot Doyle <lkml14@scotdoyle.com> Tested-by:
Tyler Cleveland <siralucardt@openmailbox.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Paulo Zanoni authored
commit d6dd6843 upstream. If we're runtime suspended and try to use the plane interfaces, we will get a lot of WARNs saying we did the wrong thing. We need to get runtime PM references to pin the objects, and to change the fences. The pin functions are the ideal places for this, but intel_crtc_cursor_set_obj() doesn't call them, so we also have to add get/put calls inside it. There is no problem if we runtime suspend right after these functions are finished, because the registers written are forwarded to system memory. Note: for a complete fix of the cursor-dpms test case, we also need the patch named "drm/i915: Don't try to enable cursor from setplane when crtc is disabled". v2: - Narrow the put/get calls on intel_crtc_cursor_set_obj() (Daniel) v3: - Make get/put also surround the fence and unpin calls (Daniel and Ville). - Merge all the plane changes into a single patch since they're the same fix. - Add the comment requested by Daniel. v4: - Remove spurious whitespace (Ville). v5: - Remove intel_crtc_update_cursor() chunk since Ville did an equivalent fix in another patch (Ville). v6: - Remove unpin chunk: it will be on a separate patch (Ville, Chris, Daniel). v7: - Same thing, new color. Testcase: igt/pm_rpm/cursor Testcase: igt/pm_rpm/cursor-dpms Testcase: igt/pm_rpm/legacy-planes Testcase: igt/pm_rpm/legacy-planes-dpms Testcase: igt/pm_rpm/universal-planes Testcase: igt/pm_rpm/universal-planes-dpms Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81645 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82603Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Imre Deak authored
commit 1a125d8a upstream. Atm we may retrain the DP link even if the CRTC is inactive through HPD work->intel_dp_check_link_status(). This in turn can lock up the PHY (at least on BYT), since the DP port is disabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81948Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Ville Syrjälä authored
commit 208bf9fd upstream. intel_enable_pipe_a() gets called with all the modeset locks already held (by drm_modeset_lock_all()), so trying to grab the same locks using another drm_modeset_acquire_ctx is going to fail miserably. Move most of the drm_modeset_acquire_ctx handling (init/drop/fini) out from intel_{get,release}_load_detect_pipe() into the callers (intel_{crt,tv}_detect()). Only the actual locking and backoff handling is left in intel_get_load_detect_pipe(). And in intel_enable_pipe_a() we just share the mode_config.acquire_ctx from drm_modeset_lock_all() which is already holding all the relevant locks. It's perfectly legal to lock the same ww_mutex multiple times using the same ww_acquire_ctx. drm_modeset_lock() will convert the returned -EALREADY into 0, so the caller doesn't need to do antyhing special. Fixes a hang on resume on my 830. Signed-off-by:
-
Ville Syrjälä authored
commit a459249c upstream. During suspend we turn off the crtcs, but leave the staged config in place so that we can restore the display(s) to their previous state on resume. During resume when we attempt to apply the force pipe A quirk we use the load detect mechanism. That doesn't check whether there was an already staged configuration for the crtc since that's not even possible during normal runtime load detection. But during resume it is possible, and if we just blindly go and overwrite the staged crtc configuration for the load detection we can no longer restore the display to the correct state. Even worse, we don't even clear all the staged connector->encoder->crtc links so we may end up using a cloned setup for the load detection, and after we're done we just clear the links related to the VGA output leaving the links for the other outputs in place. This will eventually result in calling intel_set_mode() with mode==NULL but with valid connector->encoder->crtc links which will result in dereferencing the NULL mode since the code thinks it will have to a modeset. To avoid these problems don't use any crtc with new_enabled==true for load detection. Signed-off-by:
-
Filipe Brandenburger authored
commit bfcfd44c upstream. The guard was introduced in commit ea1a8217 ("xattr: guard against simultaneous glibc header inclusion") but it is using #ifdef to check for a define that is either set to 1 or 0. Fix it to use #if instead. * Without this patch: $ { echo "#include <sys/xattr.h>"; echo "#include <linux/xattr.h>"; } | gcc -E -Iinclude/uapi - >/dev/null include/uapi/linux/xattr.h:19:0: warning: "XATTR_CREATE" redefined [enabled by default] #define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ ^ /usr/include/x86_64-linux-gnu/sys/xattr.h:32:0: note: this is the location of the previous definition #define XATTR_CREATE XATTR_CREATE ^ * With this patch: $ { echo "#include <sys/xattr.h>"; echo "#include <linux/xattr.h>"; } | gcc -E -Iinclude/uapi - >/dev/null (no warnings) Signed-off-by:
Filipe Brandenburger <filbranden@google.com> Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Cc: Allan McRae <allan@archlinux.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Benjamin Tissoires authored
commit 5abfe85c upstream. Commit "HID: logitech: perform bounds checking on device_id early enough" unfortunately leaks some errors to dmesg which are not real ones: - if the report is not a DJ one, then there is not point in checking the device_id - the receiver (index 0) can also receive some notifications which can be safely ignored given the current implementation Move out the test regarding the report_id and also discards printing errors when the receiver got notified. Fixes: ad3e14d7Reported-and-tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit c54def7b upstream. The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that magicmouse_emit_touch() gets only valid values of raw_id. Reported-by:
Steven Vittitoe <scvitti@google.com> Signed-off-by:
-
Jiri Kosina authored
commit 844817e4 upstream. The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that raw_data that we hold in picolcd_pending structure are always kept within proper bounds. Reported-by:
-
Toshiaki Makita authored
commit e15693ef upstream. cfq_group_service_tree_add() is applying new_weight at the beginning of the function via cfq_update_group_weight(). This actually allows weight to change between adding it to and subtracting it from children_weight, and triggers WARN_ON_ONCE() in cfq_group_service_tree_del(), or even causes oops by divide error during vfr calculation in cfq_group_service_tree_add(). The detailed scenario is as follows: 1. Create blkio cgroups X and Y as a child of X. Set X's weight to 500 and perform some I/O to apply new_weight. This X's I/O completes before starting Y's I/O. 2. Y starts I/O and cfq_group_service_tree_add() is called with Y. 3. cfq_group_service_tree_add() walks up the tree during children_weight calculation and adds parent X's weight (500) to children_weight of root. children_weight becomes 500. 4. Set X's weight to 1000. 5. X starts I/O and cfq_group_service_tree_add() is called with X. 6. cfq_group_service_tree_add() applies its new_weight (1000). 7. I/O of Y completes and cfq_group_service_tree_del() is called with Y. 8. I/O of X completes and cfq_group_service_tree_del() is called with X. 9. cfq_group_service_tree_del() subtracts X's weight (1000) from children_weight of root. children_weight becomes -500. This triggers WARN_ON_ONCE(). 10. Set X's weight to 500. 11. X starts I/O and cfq_group_service_tree_add() is called with X. 12. cfq_group_service_tree_add() applies its new_weight (500) and adds it to children_weight of root. children_weight becomes 0. Calcularion of vfr triggers oops by divide error. weight should be updated right before adding it to children_weight. Reported-by:
Ruki Sekiya <sekiya.ruki@lab.ntt.co.jp> Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Clemens Ladisch authored
commit a9960e6a upstream. The calculated frame size was wrong because snd_pcm_format_physical_width() actually returns the number of bits, not bytes. Use snd_pcm_format_size() instead, which not only returns bytes, but also simplifies the calculation. Fixes: 8bea869c ("ALSA: PCM midlevel: improve fifo_size handling") Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Huacai Chen authored
commit 8245b363 upstream. Lemote A1004 is already added in commit a2dd933d (ALSA: hda - Add fixup name lookup for CX5051 and 5066 codecs), but Lemote A1205 has missing. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Takashi Iwai authored
commit 7a9744cb upstream. When a driver is set up without the jack detection explicitly (either by passing a model option or via a specific fixup), the pin powermap of IDT/STAC codecs is set up wrongly, resulting in the silence output. It's because of a logic failure in stac_init_power_map(). It tries to avoid creating a callback for the pins that have other auto-hp and auto-mic callbacks, but the check is done in a wrong way at a wrong time. The stac_init_power_map() should be called after creating other jack detection ctls, and the jack callback should be created only for jack-detectable widgets. This patch fixes the check in stac_init_power_map() and its callee at the right place, after snd_hda_gen_build_controls(). Reported-by:
Adam Richter <adam_richter2004@yahoo.com> Signed-off-by:
-
Takashi Iwai authored
commit acf08081 upstream. ALC1150 codec seems to need the COEF- and PLL-setups just like its compatible ALC882 codec. Some machines (e.g. SunMicro X10SAT) show the problem like too low output volumes unless the COEF setup is applied. Reported-and-tested-by:
Dana Goyette <danagoyette@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit ff50479a upstream. Acer Aspire 3830TG with CX20588 codec has a digital built-in mic that has the same problem like many others, the inverted signal in stereo. Apply the same fixup to this machine, too. Signed-off-by:
-
Takashi Sakamoto authored
commit 65845f29 upstream. In IEC 61883-6, one data block transfers one event. In ALSA, the event equals one PCM frame, hence one data block transfers one PCM frame. But Dice has a quirk at higher sampling rate (176.4/192.0 kHz) that one data block transfers two PCM frames. Commit 10550bea ("ALSA: dice/firewire-lib: Keep dualwire mode but obsolete CIP_HI_DUALWIRE") moved some codes related to this quirk into Dice driver. But the commit forgot to add arrangements for PCM period interrupts and DMA pointer updates. As a result, Dice driver cannot work correctly at higher sampling rate. This commit adds 'double_pcm_frames' parameter to amdtp structure for this quirk. When this parameter is set, PCM period interrupts and DMA pointer updates occur at double speed than in IEC 61883-6. Reported-by:
Daniel Robbins <drobbins@funtoo.org> Fixes: 10550bea ("ALSA: dice/firewire-lib: Keep dualwire mode but obsolete CIP_HI_DUALWIRE") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
commit 1033eb5b upstream. The channel mapping is initialized by amdtp_stream_set_parameters(), however Dice driver set it before calling this function. Furthermore, the setting is wrong because the index is the value of array, and vice versa. This commit moves codes for channel mapping after the function and set it correctly. Reported-by:
-
Clemens Ladisch authored
commit ddc64b27 upstream. snd_info_get_line() documents that its last parameter must be one less than the buffer size, but this API design guarantees that (literally) every caller gets it wrong. Just change this parameter to have its obvious meaning. Reported-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
-
Will Deacon authored
commit 27d7ff27 upstream. I'm not sure what I was on when I wrote this, but when iterating over the hardware watchpoint array (hbp_watch_array), our index is off by ARM_MAX_BRP, so we walk off the end of our thread_struct... ... except, a dodgy condition in the loop means that it never executes at all (bp cannot be NULL). This patch fixes the code so that we remove the bp check and use the correct index for accessing the watchpoint structures. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Josef Bacik authored
commit 4ce97dbf upstream. Epoll on trace_pipe can sometimes hang in a weird case. If the ring buffer is empty when we set waiters_pending but an event shows up exactly at that moment we can miss being woken up by the ring buffers irq work. Since ring_buffer_empty() is inherently racey we will sometimes think that the buffer is not empty. So we don't get woken up and we don't think there are any events even though there were some ready when we added the watch, which makes us hang. This patch fixes this by making sure that we are actually on the wait list before we set waiters_pending, and add a memory barrier to make sure ring_buffer_empty() is going to be correct. Link: http://lkml.kernel.org/p/1408989581-23727-1-git-send-email-jbacik@fb.com Cc: Martin Lau <kafai@fb.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 39b5552c upstream. In __ftrace_replace_code(), when converting the call to a nop in a function it needs to compare against the "curr" (current) value of the ftrace ops, and not the "new" one. It currently does not affect x86 which is the only arch to do the trampolines with function graph tracer, but when other archs that do depend on this code implement the function graph trampoline, it can crash. Here's an example when ARM uses the trampolines (in the future): ------------[ cut here ]------------ WARNING: CPU: 0 PID: 9 at kernel/trace/ftrace.c:1716 ftrace_bug+0x17c/0x1f4() Modules linked in: omap_rng rng_core ipv6 CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.16.0-test-10959-gf0094b28-dirty #52 [<c02188f4>] (unwind_backtrace) from [<c021343c>] (show_stack+0x20/0x24) [<c021343c>] (show_stack) from [<c095a674>] (dump_stack+0x78/0x94) [<c095a674>] (dump_stack) from [<c02532a0>] (warn_slowpath_common+0x7c/0x9c) [<c02532a0>] (warn_slowpath_common) from [<c02532ec>] (warn_slowpath_null+0x2c/0x34) [<c02532ec>] (warn_slowpath_null) from [<c02cbac4>] (ftrace_bug+0x17c/0x1f4) [<c02cbac4>] (ftrace_bug) from [<c02cc44c>] (ftrace_replace_code+0x80/0x9c) [<c02cc44c>] (ftrace_replace_code) from [<c02cc658>] (ftrace_modify_all_code+0xb8/0x164) [<c02cc658>] (ftrace_modify_all_code) from [<c02cc718>] (__ftrace_modify_code+0x14/0x1c) [<c02cc718>] (__ftrace_modify_code) from [<c02c7244>] (multi_cpu_stop+0xf4/0x134) [<c02c7244>] (multi_cpu_stop) from [<c02c6e90>] (cpu_stopper_thread+0x54/0x130) [<c02c6e90>] (cpu_stopper_thread) from [<c0271cd4>] (smpboot_thread_fn+0x1ac/0x1bc) [<c0271cd4>] (smpboot_thread_fn) from [<c026ddf0>] (kthread+0xe0/0xfc) [<c026ddf0>] (kthread) from [<c020f318>] (ret_from_fork+0x14/0x20) ---[ end trace dc9ce72c5b617d8f ]--- [ 65.047264] ftrace failed to modify [<c0208580>] asm_do_IRQ+0x10/0x1c [ 65.054070] actual: 85:1b:00:eb Fixes: 7413af1f "ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global" Signed-off-by:
-
Fan Du authored
commit 979bbf7b upstream. In block write mode, when encapsulating dma_buffer, first element is 'command', the rest is data buffer, so only copy actual data buffer starting from block[1] with the size indicating by block[0]. Signed-off-by:
Fan Du <fan.du@intel.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
addy ke authored
commit b4a7bd7a upstream. I2C_CLKDIV register descripted in the previous version of RK3x chip manual is incorrect. Plus 1 is required. The correct formula: - T(SCL_HIGH) = T(PCLK) * (CLKDIVH + 1) * 8 - T(SCL_LOW) = T(PCLK) * (CLKDIVL + 1) * 8 - (SCL Divsor) = 8 * ((CLKDIVL + 1) + (CLKDIVH + 1)) - SCL = PCLK / (CLK Divsor) It will be updated to the latest version of chip manual. Signed-off-by:
Addy Ke <addy.ke@rock-chips.com> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
-
Sergei Shtylyov authored
commit 938916fb upstream. Bits 8-31 of all registers reflect the value of bits 0-7 on reads and should be 0 on writes, according to the manuals. RCAR_IRQ_ACK_{RECV|SEND} macros have all 1's in bits 8-31, thus going against the manuals, so fix them. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
commit dd318b0d upstream. Sometimes the MNR and MST interrupts happen simultaneously (stop automatically follows NACK, according to the manuals) and in such case the ID_NACK flag isn't set since the MST interrupt handling precedes MNR and all interrupts are cleared and disabled then, so that MNR interrupt is never noticed -- this causes NACK'ed transfers to be falsely reported as successful. Exchanging MNR and MST handlers fixes this issue, however the MNR bit somehow gets set again even after being explicitly cleared, so I decided to completely suppress handling of all disabled interrupts (which is a good thing anyway)... Signed-off-by:
-
Sergei Shtylyov authored
commit 91bfe298 upstream. This reverts commit 150b8be3. The I2C core's per-adapter locks can't protect from IRQs, so the driver still needs a spinlock to protect the register accesses. Signed-off-by:
-
Simon Lindgren authored
commit 6721f28a upstream. There is a race condition in at91_do_twi_xfer when signals arrive. If a signal is recieved while waiting for a transfer to complete wait_for_completion_interruptible_timeout() will return -ERESTARTSYS. This is not handled correctly resulting in interrupts still being enabled and a transfer being in flight when we return. Symptoms include a range of oopses and bus lockups. Oopses can happen when the transfer completes because the interrupt handler will corrupt the stack. If a new transfer is started before the interrupt fires the controller will start a new transfer in the middle of the old one, resulting in confused slaves and a locked bus. To avoid this, use wait_for_completion_io_timeout instead so that we don't have to deal with gracefully shutting down the transfer and disabling the interrupts. Signed-off-by:
Simon Lindgren <simon@aqwary.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Marek Roszko authored
commit 75b81f33 upstream. The driver was not bound checking the received length byte to ensure it was within the the buffer size that is allocated for SMBus blocks. This resulted in buffer overflows whenever an invalid length byte was received. It also failed to ensure the length byte was not zero. If it received zero, it would end up in an infinite loop as the at91_twi_read_next_byte function returned immediately without allowing RHR to be read to clear the RXRDY interrupt. Tested agaisnt a SMBus compliant battery. Signed-off-by:
Marek Roszko <mark.roszko@gmail.com> Acked-by:
-
Chen-Yu Tsai authored
commit 0ce4bc1d upstream. The "clock-frequency" DT property is listed as optional, However, the current code stores the return value of of_property_read_u32 in the return code of mv64xxx_of_config, but then forgets to clear it after setting the default value of "clock-frequency". It is then passed out to the main probe function, resulting in a probe failure when "clock-frequency" is missing. This patch checks and then throws away the return value of of_property_read_u32, instead of storing it and having to clear it afterwards. This issue was discovered after the property was removed from all sunxi DTs. Fixes: 4c730a06 ("i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
