- 12 Jun, 2012 9 commits
-
-
Peter Ujfalusi authored
The twl6040 DT support implementation has been changed from the originally planned. None of the child devices going to have compatible_of property which means that the child devices of twl6040 will be created as traditional MFD devices. The mfd core driver will decide (based on the DT blob) to create a device for the twl6040-vibra or not. If the DT blob has 'vibra' section the device will be created without pdata. In this case the vibra driver will reach up to the parent node to get the needed properties. With DT booted kernel we no longer be able to link the regulators to the vibra driver, they can be only linked to the MFD device (probed via DT). From the vibra driver we ned to use pdev->dev.parent to get the regulators. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
Jason Gerecke authored
Replaces code to calculate Intuos5 physical dimensions with a call to an existing function that performs the same task. Signed-off-by:
Jason Gerecke <killertofu@gmail.com> Reviewed-by:
Chris Bagwell <chris@cnpbagwell.com> Signed-off-by:
-
Jason Gerecke authored
This case appears to have been missed in the original commit. Signed-off-by:
-
Chris Bagwell authored
Bamboo One's with ID of 0x6a and 0x6b were added with correct indication of 1024 pressure levels but the Graphire packet routine was only looking at 9 bits. Increased to 10 bits. This bug caused these devices to roll over to zero pressure at half way mark. The other devices using this routine only support 256 or 512 range and look to fix unused bits at zero. Signed-off-by:
Tushant Mirchandani <tushantin@gmail.com> Reviewed-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Chris Bagwell authored
Do not register battery device until connected to a tablet. This prevents an empty battery icon from being shown when tablet is connected using USB cable. Also, call power_supply_powers() for apps that can make use of that info. And stop ignoring input registration failures. Signed-off-by:
-
Ping Cheng authored
0xed supports pen and one finger touch; 0xef is pen only. Signed-off-by:
-
Ping Cheng authored
So we can simplify a few type related if statements Signed-off-by:
-
Lee Jones authored
Allow the ab8500-ponkey driver to be probed during boot when Device Tree is enabled. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Tobias Klauser authored
pdata is zeroed using memset just a few lines before, so there is no need to set the nbuttons member to 0 again. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
- 24 May, 2012 1 commit
-
-
Dmitry Torokhov authored
Keymaps used by drivers based on matrix-keymap facilities are arrays of unsigned shorts, not chars. Treating them otherwise produces corrupted keymaps. Reported-by:
Sourav Poddar <sourav.poddar@ti.com> Signed-off-by:
-
- 21 May, 2012 1 commit
-
-
Viresh Kumar authored
Signed-off-by:
Viresh Kumar <viresh.kumar@st.com> Signed-off-by:
-
- 11 May, 2012 17 commits
-
-
Viresh Kumar authored
This adds simple DT bindings for spear-keyboard controller. Signed-off-by:
-
Dmitry Torokhov authored
When platform keymap is not supplied to matrix_keypad_build_keymap() and device tree support is enabled, try locating specified property and load keymap from it. If property name is not defined, try using "linux,keymap". Based on earlier patch by Viresh Kumar <viresh.kumar@st.com> Signed-off-by: -
Dmitry Torokhov authored
Change matrix-keymap helper to be out-of-line, like sparse keymap, allow the helper perform basic keymap validation and return errors, and prepare for device tree support. Signed-off-by: -
Jean-François Dagenais authored
Signed-off-by:
Jean-François Dagenais <jeff.dagenais@gmail.com> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Poddar, Sourav authored
Hi Dmitry, On Wed, May 9, 2012 at 3:14 PM, Poddar, Sourav <sourav.poddar@ti.com> wrote: > Hi Dmitry, > > I did some minor fixes to the patch which you suggested above and > the keypad is functional now. > > Changes: > - Move "pm_runtime_enable" before using "pm_runtime_get_sync". > > Sending the patch inlined..(also attached). > > From: G, Manjunath Kondaiah <manjugk@ti.com> > Date: Mon, 10 Oct 2011 20:52:05 +0530 > Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets > > Keypad controller register offsets are different for omap4 > and omap5. Handle these offsets through static mapping and > assign these mappings during run time. > > Tested on omap4430 sdp with 3.4-rc3. > Tested on omap5430evm with 3.1-custom kernel. > > Cc: Andrew Morton <akpm@linux-foundation.org> > Signed-off-by: Felipe Balbi <balbi@ti.com> > Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> > Signed-off-by: Dmitry Torokhov <dtor@mail.ru> > --- > drivers/input/keyboard/Kconfig | 4 +- > drivers/input/keyboard/omap4-keypad.c | 120 +++++++++++++++++++++++++------- > 2 files changed, 95 insertions(+), 29 deletions(-) > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index f354813..33bbdee 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -512,9 +512,9 @@ config KEYBOARD_OMAP > module will be called omap-keypad. > > config KEYBOARD_OMAP4 > - tristate "TI OMAP4 keypad support" > + tristate "TI OMAP4+ keypad support" > help > - Say Y here if you want to use the OMAP4 keypad. > + Say Y here if you want to use the OMAP4+ keypad. > > To compile this driver as a module, choose M here: the > module will be called omap4-keypad. > diff --git a/drivers/input/keyboard/omap4-keypad.c > b/drivers/input/keyboard/omap4-keypad.c > index e809ac0..d7102e8 100644 > --- a/drivers/input/keyboard/omap4-keypad.c > +++ b/drivers/input/keyboard/omap4-keypad.c > @@ -68,19 +68,52 @@ > > #define OMAP4_MASK_IRQSTATUSDISABLE 0xFFFF > > +enum { > + KBD_REVISION_OMAP4 = 0, > + KBD_REVISION_OMAP5, > +}; > + > struct omap4_keypad { > struct input_dev *input; > > void __iomem *base; > - int irq; > + unsigned int irq; > > unsigned int rows; > unsigned int cols; > + u32 reg_offset; > + u32 irqreg_offset; > unsigned int row_shift; > unsigned char key_state[8]; > unsigned short keymap[]; > }; > > +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset) > +{ > + return __raw_readl(keypad_data->base + > + keypad_data->reg_offset + offset); > +} > + > +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value) > +{ > + __raw_writel(value, > + keypad_data->base + keypad_data->reg_offset + offset); > +} > + > +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset) > +{ > + return __raw_readl(keypad_data->base + > + keypad_data->irqreg_offset + offset); > +} > + > +static void kbd_write_irqreg(struct omap4_keypad *keypad_data, > + u32 offset, u32 value) > +{ > + __raw_writel(value, > + keypad_data->base + keypad_data->irqreg_offset + offset); > +} > + > + > /* Interrupt handler */ > static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) > { > @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int > irq, void *dev_id) > u32 *new_state = (u32 *) key_state; > > /* Disable interrupts */ > - __raw_writel(OMAP4_VAL_IRQDISABLE, > - keypad_data->base + OMAP4_KBD_IRQENABLE); > + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > + OMAP4_VAL_IRQDISABLE); > > - *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0); > - *(new_state + 1) = __raw_readl(keypad_data->base > - + OMAP4_KBD_FULLCODE63_32); > + *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); > + *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); > > for (row = 0; row < keypad_data->rows; row++) { > changed = key_state[row] ^ keypad_data->key_state[row]; > @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int > irq, void *dev_id) > sizeof(keypad_data->key_state)); > > /* clear pending interrupts */ > - __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), > - keypad_data->base + OMAP4_KBD_IRQSTATUS); > + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, > + kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); > > /* enable interrupts */ > - __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, > - keypad_data->base + OMAP4_KBD_IRQENABLE); > + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > + OMAP4_DEF_IRQENABLE_EVENTEN | > + OMAP4_DEF_IRQENABLE_LONGKEY); > > return IRQ_HANDLED; > } > @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input) > > disable_irq(keypad_data->irq); > > - __raw_writel(OMAP4_VAL_FUNCTIONALCFG, > - keypad_data->base + OMAP4_KBD_CTRL); > - __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, > - keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); > - __raw_writel(OMAP4_VAL_IRQDISABLE, > - keypad_data->base + OMAP4_KBD_IRQSTATUS); > - __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, > - keypad_data->base + OMAP4_KBD_IRQENABLE); > - __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, > - keypad_data->base + OMAP4_KBD_WAKEUPENABLE); > + kbd_writel(keypad_data, OMAP4_KBD_CTRL, > + OMAP4_VAL_FUNCTIONALCFG); > + kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, > + OMAP4_VAL_DEBOUNCINGTIME); > + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, > + OMAP4_VAL_IRQDISABLE); > + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > + OMAP4_DEF_IRQENABLE_EVENTEN | > + OMAP4_DEF_IRQENABLE_LONGKEY); > + kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, > + OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA); > > enable_irq(keypad_data->irq); > > @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input) > disable_irq(keypad_data->irq); > > /* Disable interrupts */ > - __raw_writel(OMAP4_VAL_IRQDISABLE, > - keypad_data->base + OMAP4_KBD_IRQENABLE); > + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > + OMAP4_VAL_IRQDISABLE); > > /* clear pending interrupts */ > - __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), > - keypad_data->base + OMAP4_KBD_IRQSTATUS); > + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, > + kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); > > enable_irq(keypad_data->irq); > > @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct > platform_device *pdev) > struct resource *res; > resource_size_t size; > unsigned int row_shift, max_keys; > + int rev; > int irq; > int error; > > @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct > platform_device *pdev) > keypad_data->rows = pdata->rows; > keypad_data->cols = pdata->cols; > > + /* > + * Enable clocks for the keypad module so that we can read > + * revision register. > + */ > + pm_runtime_enable(&pdev->dev); > + error = pm_runtime_get_sync(&pdev->dev); > + if (error) { > + dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n"); > + goto err_unmap; > + } > + rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION); > + rev &= 0x03 << 30; > + rev >>= 30; > + switch (rev) { > + case KBD_REVISION_OMAP4: > + keypad_data->reg_offset = 0x00; > + keypad_data->irqreg_offset = 0x00; > + break; > + case KBD_REVISION_OMAP5: > + keypad_data->reg_offset = 0x10; > + keypad_data->irqreg_offset = 0x0c; > + break; > + default: > + dev_err(&pdev->dev, > + "Keypad reports unsupported revision %d", rev); > + error = -EINVAL; > + goto err_pm_put_sync; > + } > + > /* input device allocation */ > keypad_data->input = input_dev = input_allocate_device(); > if (!input_dev) { > error = -ENOMEM; > - goto err_unmap; > + goto err_pm_put_sync; > } > > input_dev->name = pdev->name; > @@ -273,14 +337,14 @@ static int __devinit omap4_keypad_probe(struct > platform_device *pdev) > input_dev->keycode, input_dev->keybit); > > error = request_irq(keypad_data->irq, omap4_keypad_interrupt, > - IRQF_TRIGGER_RISING, > + IRQF_DISABLED | IRQF_TRIGGER_RISING, Sorry, " IRQF_DISABLED" got included by mistake. Removing this stray change and sending it again. > "omap4-keypad", keypad_data); > if (error) { > dev_err(&pdev->dev, "failed to register interrupt\n"); > goto err_free_input; > } > > - pm_runtime_enable(&pdev->dev); > + pm_runtime_put_sync(&pdev->dev); > > error = input_register_device(keypad_data->input); > if (error < 0) { > @@ -296,6 +360,8 @@ err_pm_disable: > free_irq(keypad_data->irq, keypad_data); > err_free_input: > input_free_device(input_dev); > +err_pm_put_sync: > + pm_runtime_put_sync(&pdev->dev); > err_unmap: > iounmap(keypad_data->base); > err_release_mem: > > > ~Sourav > > On Wed, May 9, 2012 at 1:15 PM, Dmitry Torokhov > <dmitry.torokhov@gmail.com> wrote: >>> Hi Dmitry , >>> >>> >>> On Wed, May 9, 2012 at 10:48 AM, Dmitry Torokhov >>> <dmitry.torokhov@gmail.com> wrote: >>> > Ho Sourav, >>> > >>> > On Thu, Apr 26, 2012 at 11:24:37AM +0530, Sourav Poddar wrote: >>> >> >>> >> -config KEYBOARD_OMAP4 >>> >> - tristate "TI OMAP4 keypad support" >>> >> +config KEYBOARD_OMAP4+ >>> > >>> > I think this works purely by accident - '+' sign getting dropped by >>> > parser... >>> > >>> >> @@ -139,16 +192,33 @@ static int omap4_keypad_open(struct input_dev *input) >>> >> >>> >> disable_irq(keypad_data->irq); >>> >> >>> >> - __raw_writel(OMAP4_VAL_FUNCTIONALCFG, >>> >> - keypad_data->base + OMAP4_KBD_CTRL); >>> >> - __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, >>> >> - keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); >>> >> - __raw_writel(OMAP4_VAL_IRQDISABLE, >>> >> - keypad_data->base + OMAP4_KBD_IRQSTATUS); >>> >> - __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, >>> >> - keypad_data->base + OMAP4_KBD_IRQENABLE); >>> >> - __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, >>> >> - keypad_data->base + OMAP4_KBD_WAKEUPENABLE); >>> >> + keypad_data->revision = kbd_read_revision(keypad_data, >>> >> + OMAP4_KBD_REVISION); >>> >> + switch (keypad_data->revision) { >>> >> + case 1: >>> >> + keypad_data->irqstatus = OMAP4_KBD_IRQSTATUS + 0x0c; >>> >> + keypad_data->irqenable = OMAP4_KBD_IRQENABLE + 0x0c; >>> >> + keypad_data->reg_offset = 0x10; >>> >> + break; >>> > >>> > This should be done in probe(). >>> > >>> Dont we then require "pm_runtime_put_sync" in probe, since we are trying >>> to read the keypad revision register.? >> >> Ah, indeed, but I think not pm_runtime_get_sync() but >> pm_runtime_set_active(). >> >> Not sure if this will fix the crash... >> >> -- >> Dmitry >> >> >> Input: omap-keypad - dynamically handle register offsets >> >> From: G, Manjunath Kondaiah <manjugk@ti.com> >> >> Keypad controller register offsets are different for omap4 >> and omap5. Handle these offsets through static mapping and >> assign these mappings during run time. >> >> Tested on omap4430 sdp with 3.4-rc3. >> Tested on omap5430evm with 3.1-custom kernel. >> >> Signed-off-by: Felipe Balbi <balbi@ti.com> >> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> >> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> >> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> >> --- >> >> drivers/input/keyboard/Kconfig | 4 + >> drivers/input/keyboard/omap4-keypad.c | 117 ++++++++++++++++++++++++++------- >> 2 files changed, 94 insertions(+), 27 deletions(-) >> >> >> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig >> index 20a3753..84ee155 100644 >> --- a/drivers/input/keyboard/Kconfig >> +++ b/drivers/input/keyboard/Kconfig >> @@ -531,9 +531,9 @@ config KEYBOARD_OMAP >> module will be called omap-keypad. >> >> config KEYBOARD_OMAP4 >> - tristate "TI OMAP4 keypad support" >> + tristate "TI OMAP4+ keypad support" >> help >> - Say Y here if you want to use the OMAP4 keypad. >> + Say Y here if you want to use the OMAP4+ keypad. >> >> To compile this driver as a module, choose M here: the >> module will be called omap4-keypad. >> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c >> index e809ac0..c9fd0df 100644 >> --- a/drivers/input/keyboard/omap4-keypad.c >> +++ b/drivers/input/keyboard/omap4-keypad.c >> @@ -68,19 +68,52 @@ >> >> #define OMAP4_MASK_IRQSTATUSDISABLE 0xFFFF >> >> +enum { >> + KBD_REVISION_OMAP4 = 0, >> + KBD_REVISION_OMAP5, >> +}; >> + >> struct omap4_keypad { >> struct input_dev *input; >> >> void __iomem *base; >> - int irq; >> + unsigned int irq; >> >> unsigned int rows; >> unsigned int cols; >> + u32 reg_offset; >> + u32 irqreg_offset; >> unsigned int row_shift; >> unsigned char key_state[8]; >> unsigned short keymap[]; >> }; >> >> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset) >> +{ >> + return __raw_readl(keypad_data->base + >> + keypad_data->reg_offset + offset); >> +} >> + >> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value) >> +{ >> + __raw_writel(value, >> + keypad_data->base + keypad_data->reg_offset + offset); >> +} >> + >> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset) >> +{ >> + return __raw_readl(keypad_data->base + >> + keypad_data->irqreg_offset + offset); >> +} >> + >> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data, >> + u32 offset, u32 value) >> +{ >> + __raw_writel(value, >> + keypad_data->base + keypad_data->irqreg_offset + offset); >> +} >> + >> + >> /* Interrupt handler */ >> static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >> { >> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >> u32 *new_state = (u32 *) key_state; >> >> /* Disable interrupts */ >> - __raw_writel(OMAP4_VAL_IRQDISABLE, >> - keypad_data->base + OMAP4_KBD_IRQENABLE); >> + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> + OMAP4_VAL_IRQDISABLE); >> >> - *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0); >> - *(new_state + 1) = __raw_readl(keypad_data->base >> - + OMAP4_KBD_FULLCODE63_32); >> + *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); >> + *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); >> >> for (row = 0; row < keypad_data->rows; row++) { >> changed = key_state[row] ^ keypad_data->key_state[row]; >> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >> sizeof(keypad_data->key_state)); >> >> /* clear pending interrupts */ >> - __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), >> - keypad_data->base + OMAP4_KBD_IRQSTATUS); >> + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, >> + kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); >> >> /* enable interrupts */ >> - __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, >> - keypad_data->base + OMAP4_KBD_IRQENABLE); >> + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> + OMAP4_DEF_IRQENABLE_EVENTEN | >> + OMAP4_DEF_IRQENABLE_LONGKEY); >> >> return IRQ_HANDLED; >> } >> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input) >> >> disable_irq(keypad_data->irq); >> >> - __raw_writel(OMAP4_VAL_FUNCTIONALCFG, >> - keypad_data->base + OMAP4_KBD_CTRL); >> - __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, >> - keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); >> - __raw_writel(OMAP4_VAL_IRQDISABLE, >> - keypad_data->base + OMAP4_KBD_IRQSTATUS); >> - __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, >> - keypad_data->base + OMAP4_KBD_IRQENABLE); >> - __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, >> - keypad_data->base + OMAP4_KBD_WAKEUPENABLE); >> + kbd_writel(keypad_data, OMAP4_KBD_CTRL, >> + OMAP4_VAL_FUNCTIONALCFG); >> + kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, >> + OMAP4_VAL_DEBOUNCINGTIME); >> + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, >> + OMAP4_VAL_IRQDISABLE); >> + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> + OMAP4_DEF_IRQENABLE_EVENTEN | >> + OMAP4_DEF_IRQENABLE_LONGKEY); >> + kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, >> + OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA); >> >> enable_irq(keypad_data->irq); >> >> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input) >> disable_irq(keypad_data->irq); >> >> /* Disable interrupts */ >> - __raw_writel(OMAP4_VAL_IRQDISABLE, >> - keypad_data->base + OMAP4_KBD_IRQENABLE); >> + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> + OMAP4_VAL_IRQDISABLE); >> >> /* clear pending interrupts */ >> - __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), >> - keypad_data->base + OMAP4_KBD_IRQSTATUS); >> + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, >> + kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); >> >> enable_irq(keypad_data->irq); >> >> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) >> struct resource *res; >> resource_size_t size; >> unsigned int row_shift, max_keys; >> + int rev; >> int irq; >> int error; >> >> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) >> keypad_data->rows = pdata->rows; >> keypad_data->cols = pdata->cols; >> >> + /* >> + * Mark device as active (and wake up its parent) so we can read >> + * revision register. >> + */ >> + error = pm_runtime_set_active(&pdev->dev); >> + if (error) { >> + dev_err(&pdev->dev, "pm_runtime_set_active() failed\n"); >> + goto err_unmap; >> + } >> + >> + rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION); >> + rev &= 0x03 << 30; >> + rev >>= 30; >> + switch (rev) { >> + case KBD_REVISION_OMAP4: >> + keypad_data->reg_offset = 0x00; >> + keypad_data->irqreg_offset = 0x00; >> + break; >> + case KBD_REVISION_OMAP5: >> + keypad_data->reg_offset = 0x10; >> + keypad_data->irqreg_offset = 0x0c; >> + break; >> + default: >> + dev_err(&pdev->dev, >> + "Keypad reports unsupported revision %d", rev); >> + error = -EINVAL; >> + goto err_pm_suspended; >> + } >> + >> /* input device allocation */ >> keypad_data->input = input_dev = input_allocate_device(); >> if (!input_dev) { >> error = -ENOMEM; >> - goto err_unmap; >> + goto err_pm_suspended; >> } >> >> input_dev->name = pdev->name; >> @@ -281,6 +345,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) >> } >> >> pm_runtime_enable(&pdev->dev); >> + pm_runtime_put_sync(&pdev->dev); >> >> error = input_register_device(keypad_data->input); >> if (error < 0) { >> @@ -296,6 +361,8 @@ err_pm_disable: >> free_irq(keypad_data->irq, keypad_data); >> err_free_input: >> input_free_device(input_dev); >> +err_pm_suspended: >> + pm_runtime_set_suspended(&pdev->dev); >> err_unmap: >> iounmap(keypad_data->base); >> err_release_mem: From: G, Manjunath Kondaiah <manjugk@ti.com> Date: Mon, 10 Oct 2011 20:52:05 +0530 Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets Keypad controller register offsets are different for omap4 and omap5. Handle these offsets through static mapping and assign these mappings during run time. Tested on omap4430 sdp with 3.4-rc3. Tested on omap5430evm with 3.1-custom kernel. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:Felipe Balbi <balbi@ti.com> Signed-off-by:
G, Manjunath Kondaiah <manjugk@ti.com> Signed-off-by:
-
JJ Ding authored
Move synaptics_invert_y() inside CONFIG_MOUSE_PS2_SYNAPTICS to get rid of a compile warning when we don't select synaptics support. drivers/input/mouse/synaptics.c:53:12: warning: ‘synaptics_invert_y’ defined but not used [-Wunused-function] Signed-off-by:
JJ Ding <dgdunix@gmail.com> Reviewed-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
-
Dmitry Torokhov authored
Add pattens for input-related headers to MAINTAINERS file. Signed-off-by: -
Dmitry Torokhov authored
Instead of open-coded reporting number of fingers on the touchpad let's use input_mt_report_finger_count() helper. Acked-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
George Pantalos authored
This patch adds semi-MT support for ALPS v4 protocol touchpads. It is based on the work by Seth Forshee for ALPS v3 and v4 protocol support. Three packets are required to assemble and process the MT data. ST events are reported at once to avoid latency. If there were two contacts or more, report MT data instead of ST events. Thanks to Seth Forshee for providing most of the code, guidance and insight for producing this patch. Signed-off-by:
George Pantalos <gpantalos@gmail.com> Acked-by:
-
Paul Parsons authored
This driver adds support for the Synaptics NavPoint touchpad connected to a PXA27x SSP port in SPI slave mode. The device emulates a mouse; a tap or tap-and-a-half drag gesture emulates the left mouse button. For example, use the xf86-input-evdev driver for an X pointing device. Signed-off-by:
Paul Parsons <lost.distance@yahoo.com> Tested-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Daniel Kurtz authored
Helps ensure all bytes for a single message together in the system log. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Acked-by:
Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by:
-
Daniel Kurtz authored
atmel_mxt devices will send a checksum byte at the end of a message if the MSB of the object address is set. However, since this driver does not set this bit, the checksum byte isn't actually sent, so don't even try to read it. Signed-off-by:
-
Daniel Kurtz authored
Don't allow writing past the length of an object. Signed-off-by:
-
Daniel Kurtz authored
Restrict permissions on the update_fw sysfs entry to read only for root only. Also, update object permission to use a macro S_IRUGO macro instead of hard coded 0444. Signed-off-by:
-
Daniel Kurtz authored
Simple cleanup to use newer PM APIs. Signed-off-by:
-
Tai-hwa Liang authored
Hardware since Cx supports an unique identity (used to identify OEM vendors and released lot number) which is very helpful for diagnostic purpose. This revision tries to make it as a part of driver boot up message. Whilst here, also bumping fsp_drv_ver to acknowledge recent addition of absolute coordinates output. Signed-off-by:
Tai-hwa Liang <avatar@sentelic.com> Signed-off-by:
-
Peter Ujfalusi authored
Enable DT based probing of the vibra driver. Example of dts section to load the twl6040-vibra driver: twl6040: twl6040@4b { ... twl6040_vibra: twl6040@1 { compatible = "ti,twl6040-vibra"; interrupts = <4>; vddvibl-supply = <&vbat>; vddvibr-supply = <&vbat>; vibldrv_res = <8>; vibrdrv_res = <3>; viblmotor_res = <10>; vibrmotor_res = <10>; }; }; [Sasha Levin <levinsasha928@gmail.com>: fixed build error] Signed-off-by:
-
- 02 May, 2012 7 commits
-
-
Dmitry Torokhov authored
According to the standard count 0 is special - no IO should happen but we can check error conditions (device gone away, etc), and return 0 if there are no errors. We used to return -EINVAL instead and we also could return 0 if an event was "stolen" by another thread. Signed-off-by: -
Dmitry Torokhov authored
We should use rcu_dereference_protected() when checking if given client is the one that grabbed the device. This fixes warnings produced by sparse. Signed-off-by: -
Stephen Warren authored
Commit 1c6c6952 "genirq: Reject bogus threaded irq requests" requires that request_threaded_irq() either be passed an explicit handler, or that IRQF_ONESHOT be set. Set this flag. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Dmitry Torokhov authored
When copy_to/from_user fails in the middle of transfer we should not report to the user that read/write partially succeeded but rather report -EFAULT right away, so that application will know that it got its buffers all wrong. If application messed up its buffers we can't trust the data fetched from userspace and successfully written to the device or if data read from the device and transferred to userspace ended up where application expected it to end. If serio_write() fails we still going to report partial writes if failure happens in the middle of the transfer. This is basically a revert of 7a0a27d2 and 4fa07711. Signed-off-by:
-
Dmitry Torokhov authored
Reviewed-by:
-
Dmitry Torokhov authored
Instead of returning 1 (which is not even negative) let's capture and return error codde returned by usb_get_extra_descriptor(). Reviewed-by:
-
Dmitry Torokhov authored
This fixes the following warning from sparse warning: Using plain integer as NULL pointer Reviewed-by:
-
- 30 Apr, 2012 5 commits
-
-
Ashish Jangam authored
This driver adds support for DA9052/53 4-wire resistive ADC interfaced touchscreen controller. DA9052/53 is a multi-function device, therefore this driver depends on DA9052/53 core. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by:
David Dajun Chen <dchen@diasemi.com> Signed-off-by:
Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by:
-
Shawn Landden authored
as is the case of all other devices supported by usbtouchscreen.c Also list e2i under the composite configure option (TOUCHSCREEN_USB_COMPOSITE) Signed-off-by:
Shawn Landden <shawnlandden@gmail.com> Signed-off-by:
-
Shawn Landden authored
Signed-off-by:
-
Ping Cheng authored
Main part of patch is adding support for a new Wacom MT touch packet and labels these devices using MTSCREEN type. Other items of interest: Delete some duplicate code in HID parsing for Y info since its already done in X path. In wacom_query_tablet_data(), only invoke the set report that requests tablets to send Wacom Touch packets for Finger interfaces. Mostly, this is to make code intent clear. Tested-by:
-
Ping Cheng authored
From the HID usage table when it is supported. Tested-by:
-
