- 23 Jun, 2021 40 commits
-
-
Thomas Gleixner authored
Make it clear what the function is about. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
-
Thomas Gleixner authored
There is no point in using copy_init_pkru_to_fpregs() which in turn calls write_pkru(). write_pkru() tries to fiddle with the task's xstate buffer for nothing because the XRSTOR[S](init_fpstate) just cleared the xfeature flag in the xstate header which makes get_xsave_addr() fail. It's a useless exercise anyway because the reinitialization activates the FPU so before the task's xstate buffer can be used again a XRSTOR[S] must happen which in turn dumps the PKRU value. Get rid of the now unused copy_init_pkru_to_fpregs(). Signed-off-by:
-
Thomas Gleixner authored
In preparation of making the PKRU management more independent from XSTATES, write the default PKRU value into the hardware right after enabling PKRU in CR4. This ensures that switch_to() and copy_thread() have the correct setting for init task and the per CPU idle threads right away. Signed-off-by:
-
Thomas Gleixner authored
Provide a simple and trivial helper which just writes the PKRU default value without trying to fiddle with the task's xsave buffer. Signed-off-by:
-
Thomas Gleixner authored
When CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is disabled then the following code fails to compile: if (cpu_feature_enabled(X86_FEATURE_OSPKE)) { u32 pkru = READ_ONCE(init_pkru_value); .. } because init_pkru_value is defined as '0' which makes READ_ONCE() upset. Provide an accessor macro to avoid #ifdeffery all over the place. Signed-off-by: -
Thomas Gleixner authored
X86_FEATURE_OSPKE is enabled first on the boot CPU and the feature flag is set. Secondary CPUs have to enable CR4.PKE as well and set their per CPU feature flag. That's ineffective because all call sites have checks for boot_cpu_data. Make it smarter and force the feature flag when PKU is enabled on the boot cpu which allows then to use cpu_feature_enabled(X86_FEATURE_OSPKE) all over the place. That either compiles the code out when PKEY support is disabled in Kconfig or uses a static_cpu_has() for the feature check which makes a significant difference in hotpaths, e.g. context switch. Signed-off-by:
-
Thomas Gleixner authored
Both function names are a misnomer. fpu__save() is actually about synchronizing the hardware register state into the task's memory state so that either coredump or a math exception handler can inspect the state at the time where the problem happens. The function guarantees to preserve the register state, while "save" is a common terminology for saving the current state so it can be modified and restored later. This is clearly not the case here. Rename it to fpu_sync_fpstate(). fpu__copy() is used to clone the current task's FPU state when duplicating task_struct. While the register state is a copy the rest of the FPU state is not. Name it accordingly and remove the really pointless @src argument along with the warning which comes along with it. Nothing can ever copy the FPU state of a non-current task. It's clearly just a consequence of arch_dup_task_struct(), but it makes no sense to proliferate that further. Signed-off-by:
-
Dave Hansen authored
write_pkru() was originally used just to write to the PKRU register. It was mercifully short and sweet and was not out of place in pgtable.h with some other pkey-related code. But, later work included a requirement to also modify the task XSAVE buffer when updating the register. This really is more related to the XSAVE architecture than to paging. Move the read/write_pkru() to asm/pkru.h. pgtable.h won't miss them. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Thomas Gleixner authored
The copy functions for the independent features are horribly named and the supervisor and independent part is just overengineered. The point is that the supplied mask has either to be a subset of the independent features or a subset of the task->fpu.xstate managed features. Rewrite it so it checks for invalid overlaps of these areas in the caller supplied feature mask. Rename it so it follows the new naming convention for these operations. Mop up the function documentation. This allows to use that function for other purposes as well. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Link: https://lkml.kernel.org/r/20210623121455.004880675@linutronix.de
-
Andy Lutomirski authored
The salient feature of "dynamic" XSTATEs is that they are not part of the main task XSTATE buffer. The fact that they are dynamically allocated is irrelevant and will become quite confusing when user math XSTATEs start being dynamically allocated. Rename them to "independent" because they are independent of the main XSTATE code. This is just a search-and-replace with some whitespace updates to keep things aligned. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Thomas Gleixner authored
Again this not a copy. It's restoring register state from kernel memory. Signed-off-by:
-
Thomas Gleixner authored
This is not a copy functionality. It restores the register state from the supplied kernel buffer. No functional changes. Signed-off-by:
-
Thomas Gleixner authored
The FNSAVE support requires conditionals in quite some call paths because FNSAVE reinitializes the FPU hardware. If the save has to preserve the FPU register state then the caller has to conditionally restore it from memory when FNSAVE is in use. This also requires a conditional in context switch because the restore avoidance optimization cannot work with FNSAVE. As this only affects 20+ years old CPUs there is really no reason to keep this optimization effective for FNSAVE. It's about time to not optimize for antiques anymore. Just unconditionally FRSTOR the save content to the registers and clean up the conditionals all over the place. Suggested-by:
-
Thomas Gleixner authored
A copy is guaranteed to leave the source intact, which is not the case when FNSAVE is used as that reinitilizes the registers. Save does not make such guarantees and it matches what this is about, i.e. to save the state for a later restore. Rename it to save_fpregs_to_fpstate(). Signed-off-by:
-
Thomas Gleixner authored
copy_uabi_from_user_to_xstate() and copy_uabi_from_kernel_to_xstate() are almost identical except for the copy function. Unify them. Signed-off-by:
-
Thomas Gleixner authored
Rename them to reflect that these functions deal with user space format XSAVE buffers. copy_kernel_to_xstate() -> copy_uabi_from_kernel_to_xstate() copy_user_to_xstate() -> copy_sigframe_from_user_to_xstate() Again a clear statement that these functions deal with user space ABI. Suggested-by: -
Thomas Gleixner authored
The function names for fnsave/fnrstor operations are horribly named and a permanent source of confusion. Rename: copy_kernel_to_fregs() to frstor() copy_fregs_to_user() to fnsave_to_user_sigframe() copy_user_to_fregs() to frstor_from_user_sigframe() so it's clear what these are doing. All these functions are really low level wrappers around the equally named instructions, so mapping to the documentation is just natural. No functional change. Signed-off-by:
-
Thomas Gleixner authored
This is in the way of renaming the low level hardware accessors to match the instruction name. Prepend it with FPU_ which is consistent vs. the rest of the emulation code. No functional change. [ bp: Correct the Reported-by: ] Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Thomas Gleixner authored
The function names for fxsave/fxrstor operations are horribly named and a permanent source of confusion. Rename: copy_fxregs_to_kernel() to fxsave() copy_kernel_to_fxregs() to fxrstor() copy_fxregs_to_user() to fxsave_to_user_sigframe() copy_user_to_fxregs() to fxrstor_from_user_sigframe() so it's clear what these are doing. All these functions are really low level wrappers around the equally named instructions, so mapping to the documentation is just natural. While at it, replace the static_cpu_has(X86_FEATURE_FXSR) with use_fxsr() to be consistent with the rest of the code. No functional change. Signed-off-by:
-
Thomas Gleixner authored
The function names for xsave[s]/xrstor[s] operations are horribly named and a permanent source of confusion. Rename: copy_xregs_to_user() to xsave_to_user_sigframe() copy_user_to_xregs() to xrstor_from_user_sigframe() so it's entirely clear what this is about. This is also a clear indicator of the potentially different storage format because this is user ABI and cannot use compacted format. No functional change. Signed-off-by:
-
Thomas Gleixner authored
The function names for xsave[s]/xrstor[s] operations are horribly named and a permanent source of confusion. Rename: copy_xregs_to_kernel() to os_xsave() copy_kernel_to_xregs() to os_xrstor() These are truly low level wrappers around the actual instructions XSAVE[OPT]/XRSTOR and XSAVES/XRSTORS with the twist that the selection based on the available CPU features happens with an alternative to avoid conditionals all over the place and to provide the best performance for hot paths. The os_ prefix tells that this is the OS selected mechanism. No functional change. Signed-off-by:
-
Thomas Gleixner authored
If the fast path of restoring the FPU state on sigreturn fails or is not taken and the current task's FPU is active then the FPU has to be deactivated for the slow path to allow a safe update of the tasks FPU memory state. With supervisor states enabled, this requires to save the supervisor state in the memory state first. Supervisor states require XSAVES so saving only the supervisor state requires to reshuffle the memory buffer because XSAVES uses the compacted format and therefore stores the supervisor states at the beginning of the memory state. That's just an overengineered optimization. Get rid of it and save the full state for this case. Signed-off-by:
-
Thomas Gleixner authored
The function does a sanity check with a WARN_ON_ONCE() but happily proceeds when the pkey argument is out of range. Clean it up. Signed-off-by:
-
Dave Hansen authored
PKRU is being removed from the kernel XSAVE/FPU buffers. This removal will probably include warnings for code that look up PKRU in those buffers. KVM currently looks up the location of PKRU but doesn't even use the pointer that it gets back. Rework the code to avoid calling get_xsave_addr() except in cases where its result is actually used. This makes the code more clear and also avoids the inevitable PKRU warnings. This is probably a good cleanup and could go upstream idependently of any PKRU rework. Signed-off-by:
-
Thomas Gleixner authored
This function is pointlessly global and a complete misnomer because it's usage is related to both supervisor state checks and compacted format checks. Remove it and just make the conditions check the XSAVES feature. Signed-off-by:
-
Thomas Gleixner authored
The only usecase for fpu__write_begin is the set() callback of regset, so the function is pointlessly global. Move it to the regset code and rename it to fpu_force_restore() which is exactly decribing what the function does. Signed-off-by:
-
Thomas Gleixner authored
The function can only be used from the regset get() callbacks safely. So there is no reason to have it globally exposed. Signed-off-by:
-
Thomas Gleixner authored
No more users. Signed-off-by:
-
Thomas Gleixner authored
Use the new functionality of copy_xstate_to_uabi_buf() to retrieve the FX state when XSAVE* is in use. This avoids to overwrite the FPU state buffer with fpstate_sanitize_xstate() which is error prone and duplicated code. Signed-off-by:
-
Thomas Gleixner authored
Use the new functionality of copy_xstate_to_uabi_buf() to retrieve the FX state when XSAVE* is in use. This avoids overwriting the FPU state buffer with fpstate_sanitize_xstate() which is error prone and duplicated code. Signed-off-by:
-
Thomas Gleixner authored
When xsave with init state optimization is used then a component's state in the task's xsave buffer can be stale when the corresponding feature bit is not set. fpregs_get() and xfpregs_get() invoke fpstate_sanitize_xstate() to update the task's xsave buffer before retrieving the FX or FP state. That's just duplicated code as copy_xstate_to_kernel() already handles this correctly. Add a copy mode argument to the function which allows to restrict the state copy to the FP and SSE features. Also rename the function to copy_xstate_to_uabi_buf() so the name reflects what it is doing. Signed-off-by:
-
Andy Lutomirski authored
fpregs_set() has unnecessary complexity to support short or nonzero-offset writes and to handle the case in which a copy from userspace overwrites some of the target buffer and then fails. Support for partial writes is useless -- just require that the write has offset 0 and the correct size, and copy into a temporary kernel buffer to avoid clobbering the state if the user access fails. Signed-off-by:
-
Andy Lutomirski authored
There is no benefit from accepting and silently changing an invalid MXCSR value supplied via ptrace(). Instead, return -EINVAL on invalid input. Signed-off-by:
-
Andy Lutomirski authored
xfpregs_set() was incomprehensible. Almost all of the complexity was due to trying to support nonsensically sized writes or -EFAULT errors that would have partially or completely overwritten the destination before failing. Nonsensically sized input would only have been possible using PTRACE_SETREGSET on REGSET_XFP. Fortunately, it appears (based on Debian code search results) that no one uses that API at all, let alone with the wrong sized buffer. Failed user access can be handled more cleanly by first copying to kernel memory. Just rewrite it to require sensible input. Signed-off-by:
-
Dave Hansen authored
ptrace() has interfaces that let a ptracer inspect a ptracee's register state. This includes XSAVE state. The ptrace() ABI includes a hardware-format XSAVE buffer for both the SETREGS and GETREGS interfaces. In the old days, the kernel buffer and the ptrace() ABI buffer were the same boring non-compacted format. But, since the advent of supervisor states and the compacted format, the kernel buffer has diverged from the format presented in the ABI. This leads to two paths in the kernel: 1. Effectively a verbatim copy_to_user() which just copies the kernel buffer out to userspace. This is used when the kernel buffer is kept in the non-compacted form which means that it shares a format with the ptrace ABI. 2. A one-state-at-a-time path: copy_xstate_to_kernel(). This is theoretically slower since it does a bunch of piecemeal copies. Remove the verbatim copy case. Speed probably does not matter in this path, and the vast majority of new hardware will use the one-state-at-a-time path anyway. This ensures greater testing for the "slow" path. This also makes enabling PKRU in this interface easier since a single path can be patched instead of two. Signed-off-by:
-
Thomas Gleixner authored
Instead of masking out reserved bits, check them and reject the provided state as invalid if not zero. Suggested-by:
-
Thomas Gleixner authored
xstateregs_set() operates on a stopped task and tries to copy the provided buffer into the task's fpu.state.xsave buffer. Any error while copying or invalid state detected after copying results in wiping the target task's FPU state completely including supervisor states. That's just wrong. The caller supplied invalid data or has a problem with unmapped memory, so there is absolutely no justification to corrupt the target state. Fix this with the following modifications: 1) If data has to be copied from userspace, allocate a buffer and copy from user first. 2) Use copy_kernel_to_xstate() unconditionally so that header checking works correctly. 3) Return on error without corrupting the target state. This prevents corrupting states and lets the caller deal with the problem it caused in the first place. Signed-off-by: -
Thomas Gleixner authored
If the count argument is larger than the xstate size, this will happily copy beyond the end of xstate. Fixes: 91c3dba7 ("x86/fpu/xstate: Fix PTRACE frames for XSAVES") Signed-off-by:
-
Thomas Gleixner authored
They are only used in fpstate_init() and there is no point to have them in a header just to make reading the code harder. Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
