- 24 Jan, 2021 18 commits
-
-
Nathan Chancellor authored
The K: entry should ensure that Nick and I always get CC'd on patches that touch these files but it is better to be explicit rather than implicit. Link: https://lkml.kernel.org/r/20210114004059.2129921-1-natechancellor@gmail.comSigned-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Xiaoming Ni authored
The process_sysctl_arg() does not check whether val is empty before invoking strlen(val). If the command line parameter () is incorrectly configured and val is empty, oops is triggered. For example: "hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is triggered. The call stack is as follows: Kernel command line: .... hung_task_panic ...... Call trace: __pi_strlen+0x10/0x98 parse_args+0x278/0x344 do_sysctl_args+0x8c/0xfc kernel_init+0x5c/0xf4 ret_from_fork+0x10/0x30 To fix it, check whether "val" is empty when "phram" is a sysctl field. Error codes are returned in the failure branch, and error logs are generated by parse_args(). Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com Fixes: 3db978d4 ("kernel/sysctl: support setting sysctl parameters from kernel command line") Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> [5.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
The original PowerPC highmem mapping function used __set_pte_at() to denote that the mapping is per CPU. This got lost with the conversion to the generic implementation. Override the default map function. Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de Fixes: 47da42b2 ("powerpc/mm/highmem: Switch to generic kmap atomic") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
set_pte_at() on MIPS invokes update_cache() which might recurse into kmap_local(). Use set_pte() like the original MIPS highmem implementation did. Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de Fixes: a4c33e83 ("mips/mm/highmem: Switch to generic kmap atomic") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
The generic kmap_local() map function uses set_pte_at(), but MIPS requires set_pte() and PowerPC wants __set_pte_at(). Provide arch_kmap_local_set_pte() and default it to set_pte_at(). Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
Patch series "mm/highmem: Fix fallout from generic kmap_local conversions". The kmap_local conversion wreckaged sparc, mips and powerpc as it missed some of the details in the original implementation. This patch (of 4): The recent conversion to the generic kmap_local infrastructure failed to assign the proper pre/post map/unmap flush operations for sparc. Sparc requires cache flush before map/unmap and tlb flush afterwards. Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de Fixes: 3293efa9 ("sparc/mm/highmem: Switch to generic kmap atomic") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Williams authored
The conversion to move pfn_to_online_page() internal to soft_offline_page() missed that the get_user_pages() reference taken by the madvise() path needs to be dropped when pfn_to_online_page() fails. Note the direct sysfs-path to soft_offline_page() does not perform a get_user_pages() lookup. When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page() pfn the kernel hangs at dax-device shutdown due to a leaked reference. Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: feec24a6 ("mm, soft-offline: convert parameter to pfn") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
Building ubsan kernels even for compile-testing introduced these warnings in my randconfig environment: crypto/blake2b_generic.c:98:13: error: stack frame size of 9636 bytes in function 'blake2b_compress' [-Werror,-Wframe-larger-than=] static void blake2b_compress(struct blake2b_state *S, crypto/sha512_generic.c:151:13: error: stack frame size of 1292 bytes in function 'sha512_generic_block_fn' [-Werror,-Wframe-larger-than=] static void sha512_generic_block_fn(struct sha512_state *sst, u8 const *src, lib/crypto/curve25519-fiat32.c:312:22: error: stack frame size of 2180 bytes in function 'fe_mul_impl' [-Werror,-Wframe-larger-than=] static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10]) lib/crypto/curve25519-fiat32.c:444:22: error: stack frame size of 1588 bytes in function 'fe_sqr_impl' [-Werror,-Wframe-larger-than=] static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10]) Further testing showed that this is caused by -fsanitize=unsigned-integer-overflow, but is isolated to the 32-bit x86 architecture. The one in blake2b immediately overflows the 8KB stack area architectures, so better ensure this never happens by disabling the option for 32-bit x86. Link: https://lkml.kernel.org/r/20210112202922.2454435-1-arnd@kernel.org Link: https://lore.kernel.org/lkml/20201230154749.746641-1-arnd@kernel.org/ Fixes: d0a3ac54 ("ubsan: enable for all*config builds") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Marco Elver <elver@google.com> Cc: George Popescu <georgepope@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrey Konovalov authored
A previous commit added resetting KASAN page tags to kernel_init_free_pages() to avoid false-positives due to accesses to metadata with the hardware tag-based mode. That commit did reset page tags before the metadata access, but didn't restore them after. As the result, KASAN fails to detect bad accesses to page_alloc allocations on some configurations. Fix this by recovering the tag after the metadata access. Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com Fixes: aa1ef4d7 ("kasan, mm: reset tags when accessing metadata") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrey Konovalov authored
A few places where SLUB accesses object's data or metadata were missed in a previous patch. This leads to false positives with hardware tag-based KASAN when bulk allocations are used with init_on_alloc/free. Fix the false-positives by resetting pointer tags during these accesses. (The kasan_reset_tag call is removed from slab_alloc_node, as it's added into maybe_wipe_obj_freeptr.) Link: https://linux-review.googlesource.com/id/I50dd32838a666e173fe06c3c5c766f2c36aae901 Link: https://lkml.kernel.org/r/093428b5d2ca8b507f4a79f92f9929b35f7fada7.1610731872.git.andreyknvl@google.com Fixes: aa1ef4d7 ("kasan, mm: reset tags when accessing metadata") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrey Konovalov authored
The initially proposed KASAN command line parameters are redundant. This change drops the complex "kasan.mode=off/prod/full" parameter and adds a simpler kill switch "kasan=off/on" instead. The new parameter together with the already existing ones provides a cleaner way to express the same set of features. The full set of parameters with this change: kasan=off/on - whether KASAN is enabled kasan.fault=report/panic - whether to only print a report or also panic kasan.stacktrace=off/on - whether to collect alloc/free stack traces Default values: kasan=on kasan.fault=report kasan.stacktrace=on (if CONFIG_DEBUG_KERNEL=y) kasan.stacktrace=off (otherwise) Link: https://linux-review.googlesource.com/id/Ib3694ed90b1e8ccac6cf77dfd301847af4aba7b8 Link: https://lkml.kernel.org/r/4e9c4a4bdcadc168317deb2419144582a9be6e61.1610736745.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Lecopzer Chen authored
kasan_remove_zero_shadow() shall use original virtual address, start and size, instead of shadow address. Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com Fixes: 0207df4f ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN") Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Lecopzer Chen authored
During testing kasan_populate_early_shadow and kasan_remove_zero_shadow, if the shadow start and end address in kasan_remove_zero_shadow() is not aligned to PMD_SIZE, the remain unaligned PTE won't be removed. In the test case for kasan_remove_zero_shadow(): shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000 3-level page table: PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K 0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE. In the correct condition, this should fallback to the next level kasan_remove_pmd_table() but the condition flow always continue to skip the unaligned part. Fix by correcting the condition when next and addr are neither aligned. Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com Fixes: 0207df4f ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN") Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: YJ Chiang <yj.chiang@mediatek.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Shakeel Butt authored
Currently the kernel is not correctly updating the numa stats for NR_FILE_PAGES and NR_SHMEM on THP migration. Fix that. For NR_FILE_DIRTY and NR_ZONE_WRITE_PENDING, although at the moment there is no need to handle THP migration as kernel still does not have write support for file THP but to be more future proof, this patch adds the THP support for those stats as well. Link: https://lkml.kernel.org/r/20210108155813.2914586-2-shakeelb@google.com Fixes: e71769ae ("mm: enable thp migration for shmem thp") Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Shakeel Butt authored
The kernel updates the per-node NR_FILE_DIRTY stats on page migration but not the memcg numa stats. That was not an issue until recently the commit 5f9a4f4a ("mm: memcontrol: add the missing numa_stat interface for cgroup v2") exposed numa stats for the memcg. So fix the file_dirty per-memcg numa stat. Link: https://lkml.kernel.org/r/20210108155813.2914586-1-shakeelb@google.com Fixes: 5f9a4f4a ("mm: memcontrol: add the missing numa_stat interface for cgroup v2") Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Roman Gushchin authored
Imran Khan reported a 16% regression in hackbench results caused by the commit f2fe7b09 ("mm: memcg/slab: charge individual slab objects instead of pages"). The regression is noticeable in the case of a consequent allocation of several relatively large slab objects, e.g. skb's. As soon as the amount of stocked bytes exceeds PAGE_SIZE, drain_obj_stock() and __memcg_kmem_uncharge() are called, and it leads to a number of atomic operations in page_counter_uncharge(). The corresponding call graph is below (provided by Imran Khan): |__alloc_skb | | | |__kmalloc_reserve.isra.61 | | | | | |__kmalloc_node_track_caller | | | | | | | |slab_pre_alloc_hook.constprop.88 | | | obj_cgroup_charge | | | | | | | | | |__memcg_kmem_charge | | | | | | | | | | | |page_counter_try_charge | | | | | | | | | |refill_obj_stock | | | | | | | | | | | |drain_obj_stock.isra.68 | | | | | | | | | | | | | |__memcg_kmem_uncharge | | | | | | | | | | | | | | | |page_counter_uncharge | | | | | | | | | | | | | | | | | |page_counter_cancel | | | | | | | | | | | |__slab_alloc | | | | | | | | | |___slab_alloc | | | | | | | | |slab_post_alloc_hook Instead of directly uncharging the accounted kernel memory, it's possible to refill the generic page-sized per-cpu stock instead. It's a much faster operation, especially on a default hierarchy. As a bonus, __memcg_kmem_uncharge_page() will also get faster, so the freeing of page-sized kernel allocations (e.g. large kmallocs) will become faster. A similar change has been done earlier for the socket memory by the commit 475d0487 ("mm: memcontrol: use per-cpu stocks for socket memory uncharging"). Link: https://lkml.kernel.org/r/20210106042239.2860107-1-guro@fb.com Fixes: f2fe7b09 ("mm: memcg/slab: charge individual slab objects instead of pages") Signed-off-by: Roman Gushchin <guro@fb.com> Reported-by: Imran Khan <imran.f.khan@oracle.com> Tested-by: Imran Khan <imran.f.khan@oracle.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Michal Koutn <mkoutny@suse.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
There could be struct pages that are not backed by actual physical memory. This can happen when the actual memory bank is not a multiple of SECTION_SIZE or when an architecture does not register memory holes reserved by the firmware as memblock.memory. Such pages are currently initialized using init_unavailable_mem() function that iterates through PFNs in holes in memblock.memory and if there is a struct page corresponding to a PFN, the fields if this page are set to default values and the page is marked as Reserved. init_unavailable_mem() does not take into account zone and node the page belongs to and sets both zone and node links in struct page to zero. On a system that has firmware reserved holes in a zone above ZONE_DMA, for instance in a configuration below: # grep -A1 E820 /proc/iomem 7a17b000-7a216fff : Unknown E820 type 7a217000-7bffffff : System RAM unset zone link in struct page will trigger VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page); because there are pages in both ZONE_DMA32 and ZONE_DMA (unset zone link in struct page) in the same pageblock. Update init_unavailable_mem() to use zone constraints defined by an architecture to properly setup the zone link and use node ID of the adjacent range in memblock.memory to set the node link. Link: https://lkml.kernel.org/r/20210111194017.22696-3-rppt@kernel.org Fixes: 73a6e474 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: David Hildenbrand <david@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qian Cai <cai@lca.pw> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
Patch series "mm: fix initialization of struct page for holes in memory layout", v3. Commit 73a6e474 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") exposed several issues with the memory map initialization and these patches fix those issues. Initially there were crashes during compaction that Qian Cai reported back in April [1]. It seemed back then that the problem was fixed, but a few weeks ago Andrea Arcangeli hit the same bug [2] and there was an additional discussion at [3]. [1] https://lore.kernel.org/lkml/8C537EB7-85EE-4DCF-943E-3CC0ED0DF56D@lca.pw [2] https://lore.kernel.org/lkml/20201121194506.13464-1-aarcange@redhat.com [3] https://lore.kernel.org/mm-commits/20201206005401.qKuAVgOXr%akpm@linux-foundation.org This patch (of 2): The first 4Kb of memory is a BIOS owned area and to avoid its allocation for the kernel it was not listed in e820 tables as memory. As the result, pfn 0 was never recognised by the generic memory management and it is not a part of neither node 0 nor ZONE_DMA. If set_pfnblock_flags_mask() would be ever called for the pageblock corresponding to the first 2Mbytes of memory, having pfn 0 outside of ZONE_DMA would trigger VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page); Along with reserving the first 4Kb in e820 tables, several first pages are reserved with memblock in several places during setup_arch(). These reservations are enough to ensure the kernel does not touch the BIOS area and it is not necessary to remove E820_TYPE_RAM for pfn 0. Remove the update of e820 table that changes the type of pfn 0 and move the comment describing why it was done to trim_low_memory_range() that reserves the beginning of the memory. Link: https://lkml.kernel.org/r/20210111194017.22696-2-rppt@kernel.orgSigned-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: David Hildenbrand <david@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qian Cai <cai@lca.pw> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 23 Jan, 2021 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull mtd fixes from Miquel Raynal. * 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: omap: Use BCH private fields in the specific OOB layout mtd: spinand: Fix MTD_OPS_AUTO_OOB requests mtd: rawnand: intel: check the mtd name only after setting the variable mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC engine mtd: rawnand: gpmi: fix dst bit offset when extracting raw payload
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Another bunch of driver fixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sprd: depend on COMMON_CLK to fix compile tests Revert "i2c: imx: Remove unused .id_table support" i2c: octeon: check correct size of maximum RECV_LEN packet i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO i2c: bpmp-tegra: Ignore unknown I2C_M flags i2c: tegra: Wait for config load atomically while in ISR
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Twelve minor fixes, all in drivers or doc. Most of the fixes are pretty obvious (although we had two goes to get the UFS sysfs doc right) and the biggest change is in the ufs driver which they've extensively tested" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvfc: Set default timeout to avoid crash during migration scsi: target: tcmu: Fix use-after-free of se_cmd->priv scsi: fnic: Fix memleak in vnic_dev_init_devcmd2 scsi: libfc: Avoid invoking response handler twice if ep is already completed scsi: scsi_transport_srp: Don't block target in failfast state scsi: docs: ABI: sysfs-driver-ufs: Rectify table formatting scsi: ufs: Fix tm request when non-fatal error happens scsi: ufs: Fix livelock of ufshcd_clear_ua_wluns() scsi: ibmvfc: Fix missing cast of ibmvfc_event pointer to u64 handle scsi: ufs: ufshcd-pltfrm depends on HAS_IOMEM scsi: megaraid_sas: Fix MEGASAS_IOC_FIRMWARE regression scsi: docs: ABI: sysfs-driver-ufs: Add DeepSleep power mode
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah : "Five fixes to the kunit tool and documentation from Daniel Latypov and David Gow" * tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: move kunitconfig parsing into __init__, make it optional kunit: tool: fix minor typing issue with None status kunit: tool: surface and address more typing issues Documentation: kunit: include example of a parameterized test kunit: tool: Fix spelling of "diagnostic" in kunit_parser
-
- 22 Jan, 2021 12 commits
-
-
Linus Torvalds authored
Merge tag 'for-5.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM integrity crash if "recalculate" used without "internal_hash" - Fix DM integrity "recalculate" support to prevent recalculating checksums if we use internal_hash or journal_hash with a key (e.g. HMAC). Use of crypto as a means to prevent malicious corruption requires further changes and was never a design goal for dm-integrity's primary usecase of detecting accidental corruption. - Fix a benign dm-crypt copy-and-paste bug introduced as part of a fix that was merged for 5.11-rc4. - Fix DM core's dm_get_device() to avoid filesystem lookup to get block device (if possible). * tag 'for-5.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: avoid filesystem lookup in dm_get_dev_t() dm crypt: fix copy and paste bug in crypt_alloc_req_aead dm integrity: conditionally disable "recalculate" feature dm integrity: fix a crash if "recalculate" used without "internal_hash"
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools fixes from Arnaldo Carvalho de Melo: - Fix id index used in Intel PT for heterogeneous systems - Fix overrun issue in 'perf script' for dynamically-allocated PMU type number - Fix 'perf stat' metrics containing the 'duration_time' synthetic event - Fix system PMU 'perf stat' metrics * tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf script: Fix overrun issue for dynamically-allocated PMU type number perf metricgroup: Fix system PMU metrics perf metricgroup: Fix for metrics containing duration_time perf evlist: Fix id index for heterogeneous systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Correctly mask out bits 63:60 in a kernel tag check fault address (specified as unknown by the architecture). Previously they were just zeroed but for kernel pointers they need to be all ones. - Fix a panic (unexpected kernel BRK exception) caused by kprobes being reentered due to an interrupt. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kprobes: Fix Uexpected kernel BRK exception at EL1 kasan, arm64: fix pointer tags in KASAN reports
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A patch to zero out sensitive cryptographic data and two minor cleanups prompted by the fact that a bunch of code was moved in this cycle" * tag 'ceph-for-5.11-rc5' of git://github.com/ceph/ceph-client: libceph: fix "Boolean result is used in bitwise operation" warning libceph, ceph: disambiguate ceph_connection_operations handlers libceph: zero out session key and connection secret
-
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblockLinus Torvalds authored
Pull typo fix from Mike Rapoport: "Fix typo in comment of memblock_phys_alloc_try_nid()" * tag 'fixes-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: mm/memblock: Fix typo in comment of memblock_phys_alloc_try_nid()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix initialization of block size when ext_csd isn't present MMC host: - sdhci-brcmstb: Fix mmc timeout errors on S5 suspend - sdhci-of-dwcmshc: Fix request accessing RPMB - sdhci-xenon: Fix 1.8v regulator stabilization" * tag 'mmc-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: don't initialize block size from ext_csd if not present mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend mmc: sdhci-xenon: fix 1.8v regulator stabilization mmc: sdhci-of-dwcmshc: fix rpmb access
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A small collection of bug-fixes and model-specific quirks" * tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634 platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS check platform/x86: thinkpad_acpi: correct palmsensor error checking platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352 platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet platform/x86: i2c-multi-instantiate: Don't create platform device for INT3515 ACPI nodes platform/surface: SURFACE_PLATFORMS should depend on ACPI platform/surface: surface_gpe: Fix non-PM_SLEEP build warnings tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or base_frequency tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequency
-
Qais Yousef authored
I was hitting the below panic continuously when attaching kprobes to scheduler functions [ 159.045212] Unexpected kernel BRK exception at EL1 [ 159.053753] Internal error: BRK handler: f2000006 [#1] PREEMPT SMP [ 159.059954] Modules linked in: [ 159.063025] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.11.0-rc4-00008-g1e2a199f #56 [rt-app] <notice> [1] Exiting.[ 159.071166] Hardware name: ARM Juno development board (r2) (DT) [ 159.079689] pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO BTYPE=--) [ 159.085723] pc : 0xffff80001624501c [ 159.089377] lr : attach_entity_load_avg+0x2ac/0x350 [ 159.094271] sp : ffff80001622b640 [rt-app] <notice> [0] Exiting.[ 159.097591] x29: ffff80001622b640 x28: 0000000000000001 [ 159.105515] x27: 0000000000000049 x26: ffff000800b79980 [ 159.110847] x25: ffff00097ef37840 x24: 0000000000000000 [ 159.116331] x23: 00000024eacec1ec x22: ffff00097ef12b90 [ 159.121663] x21: ffff00097ef37700 x20: ffff800010119170 [rt-app] <notice> [11] Exiting.[ 159.126995] x19: ffff00097ef37840 x18: 000000000000000e [ 159.135003] x17: 0000000000000001 x16: 0000000000000019 [ 159.140335] x15: 0000000000000000 x14: 0000000000000000 [ 159.145666] x13: 0000000000000002 x12: 0000000000000002 [ 159.150996] x11: ffff80001592f9f0 x10: 0000000000000060 [ 159.156327] x9 : ffff8000100f6f9c x8 : be618290de0999a1 [ 159.161659] x7 : ffff80096a4b1000 x6 : 0000000000000000 [ 159.166990] x5 : ffff00097ef37840 x4 : 0000000000000000 [ 159.172321] x3 : ffff000800328948 x2 : 0000000000000000 [ 159.177652] x1 : 0000002507d52fec x0 : ffff00097ef12b90 [ 159.182983] Call trace: [ 159.185433] 0xffff80001624501c [ 159.188581] update_load_avg+0x2d0/0x778 [ 159.192516] enqueue_task_fair+0x134/0xe20 [ 159.196625] enqueue_task+0x4c/0x2c8 [ 159.200211] ttwu_do_activate+0x70/0x138 [ 159.204147] sched_ttwu_pending+0xbc/0x160 [ 159.208253] flush_smp_call_function_queue+0x16c/0x320 [ 159.213408] generic_smp_call_function_single_interrupt+0x1c/0x28 [ 159.219521] ipi_handler+0x1e8/0x3c8 [ 159.223106] handle_percpu_devid_irq+0xd8/0x460 [ 159.227650] generic_handle_irq+0x38/0x50 [ 159.231672] __handle_domain_irq+0x6c/0xc8 [ 159.235781] gic_handle_irq+0xcc/0xf0 [ 159.239452] el1_irq+0xb4/0x180 [ 159.242600] rcu_is_watching+0x28/0x70 [ 159.246359] rcu_read_lock_held_common+0x44/0x88 [ 159.250991] rcu_read_lock_any_held+0x30/0xc0 [ 159.255360] kretprobe_dispatcher+0xc4/0xf0 [ 159.259555] __kretprobe_trampoline_handler+0xc0/0x150 [ 159.264710] trampoline_probe_handler+0x38/0x58 [ 159.269255] kretprobe_trampoline+0x70/0xc4 [ 159.273450] run_rebalance_domains+0x54/0x80 [ 159.277734] __do_softirq+0x164/0x684 [ 159.281406] irq_exit+0x198/0x1b8 [ 159.284731] __handle_domain_irq+0x70/0xc8 [ 159.288840] gic_handle_irq+0xb0/0xf0 [ 159.292510] el1_irq+0xb4/0x180 [ 159.295658] arch_cpu_idle+0x18/0x28 [ 159.299245] default_idle_call+0x9c/0x3e8 [ 159.303265] do_idle+0x25c/0x2a8 [ 159.306502] cpu_startup_entry+0x2c/0x78 [ 159.310436] secondary_start_kernel+0x160/0x198 [ 159.314984] Code: d42000c0 aa1e03e9 d42000c0 aa1e03e9 (d42000c0) After a bit of head scratching and debugging it turned out that it is due to kprobe handler being interrupted by a tick that causes us to go into (I think another) kprobe handler. The culprit was kprobe_breakpoint_ss_handler() returning DBG_HOOK_ERROR which leads to the Unexpected kernel BRK exception. Reverting commit ba090f9c ("arm64: kprobes: Remove redundant kprobe_step_ctx") seemed to fix the problem for me. Further analysis showed that kcb->kprobe_status is set to KPROBE_REENTER when the error occurs. By teaching kprobe_breakpoint_ss_handler() to handle this status I can no longer reproduce the problem. Fixes: ba090f9c ("arm64: kprobes: Remove redundant kprobe_step_ctx") Signed-off-by: Qais Yousef <qais.yousef@arm.com> Acked-by: Will Deacon <will@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20210122110909.3324607-1-qais.yousef@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Krzysztof Kozlowski authored
The I2C_SPRD uses Common Clock Framework thus it cannot be built on platforms without it (e.g. compile test on MIPS with LANTIQ): /usr/bin/mips-linux-gnu-ld: drivers/i2c/busses/i2c-sprd.o: in function `sprd_i2c_probe': i2c-sprd.c:(.text.sprd_i2c_probe+0x254): undefined reference to `clk_set_parent' Fixes: 4a2d5f66 ("i2c: Enable compile testing for more drivers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Fabio Estevam authored
Coldfire platforms are non-DT users of this driver, so keep the .id_table support. This reverts commit c610199c. Fixes: c610199c (i2c: imx: Remove unused .id_table support") Reported-by: Sascha Hauer <sha@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
git://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC fixes from Stafford Horne: - Compiler warning fixup for new Litex SoC driver - Sparse warning fixup for iounmap * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: io: Add missing __iomem annotation to iounmap() soc: litex: Fix compile warning when device tree is not configured
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regular fixes pull, nothing too major in here, just some core fixes, one vc4, bunch of i915 and a bunch of amdgpu. core: - atomic: Release state on error - syncobj: Fix use-after-free - ttm: Don't use GFP_TRANSHUGE_LIGTH - vram-helper: Fix memory leak in vmap vc4: - Unify driver naming for PCM i915: - HDCP fixes - PMU wakeref fix - Fix HWSP validity race - Fix DP protocol converter accidental 4:4:4->4:2:0 conversion for RGB amdgpu: - Green Sardine fixes - Vangogh fixes - Renoir fixes - Misc display fixes" * tag 'drm-fixes-2021-01-22' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amdgpu: update mmhub mgcg&ls for mmhub_v2_3 drm/amdgpu: modify GCR_GENERAL_CNTL for Vangogh drm/amdgpu/pm: no need GPU status set since mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL added in FSDL drm/amd/display: Fixed corruptions on HPDRX link loss restore drm/amd/display: Use hardware sequencer functions for PG control drm/amd/display: Change function decide_dp_link_settings to avoid infinite looping drm/amd/display: Allow PSTATE chnage when no displays are enabled drm/amd/display: Update dram_clock_change_latency for DCN2.1 drm/amdgpu: remove gpu info firmware of green sardine drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case drm/syncobj: Fix use-after-free drm/vram-helper: Reuse existing page mappings in vmap drm/atomic: put state on error path drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting YCbCr 4:4:4 drm/i915: Check for rq->hwsp validity after acquiring RCU lock drm/i915/pmu: Don't grab wakeref when enabling events drm/i915/gt: Prevent use of engine->wa_ctx after error drm/vc4: Unify PCM card's driver_name drm/ttm: stop using GFP_TRANSHUGE_LIGHT drm/i915/hdcp: Get conn while content_type changed ...
-
- 21 Jan, 2021 6 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.11-2021-01-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.11-2021-01-21: amdgpu: - Green Sardine fixes - Vangogh fixes - Renoir fixes - Misc display fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210121160129.3981-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2021-01-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.11-rc5: - HDCP fixes - PMU wakeref fix - Fix HWSP validity race - Fix DP protocol converter accidental 4:4:4->4:2:0 conversion for RGB Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87a6t2kzgb.fsf@intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Short summary of fixes pull (less than what git shortlog provides): * drm/atomic: Release state on error * drm/syncobj: Fix use-after-free * drm/ttm: Don't use GFP_TRANSHUGE_LIGTH * drm/vc4: Unify driver naming for PCM * drm/vram-helper: Fix memory leak in vmap Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YAgdYGNoH7pC29rz@linux-uq9g
-
Jin Yao authored
When unpacking the event which is from dynamic PMU, the array output[OUTPUT_TYPE_MAX] may be overrun. For example, type number of SKL uncore_imc is 10, but OUTPUT_TYPE_MAX is 7 now (OUTPUT_TYPE_MAX = PERF_TYPE_MAX + 1). /* In builtin-script.c */ process_event() { unsigned int type = output_type(attr->type); if (output[type].fields == 0) return; } output[10] is overrun. Create a type OUTPUT_TYPE_OTHER for dynamic PMU events, then output_type(attr->type) will return OUTPUT_TYPE_OTHER here. Note that if PERF_TYPE_MAX ever changed, then there would be a conflict between old perf.data files that had a dynamicaliy allocated PMU number that would then be the same as a fixed PERF_TYPE. Example: # perf record --switch-events -C 0 -e "{cpu-clock,uncore_imc/data_reads/,uncore_imc/data_writes/}:SD" -a -- sleep 1 # perf script Before: swapper 0 [000] 1479253.987551: 277766 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1479253.987797: 246709 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1479253.988127: 329883 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1479253.988273: 146393 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1479253.988523: 249977 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1479253.988877: 354090 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1479253.989023: 145940 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1479253.989383: 359856 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1479253.989523: 140082 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) After: swapper 0 [000] 1397040.402011: 272384 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1397040.402011: 5396 uncore_imc/data_reads/: swapper 0 [000] 1397040.402011: 967 uncore_imc/data_writes/: swapper 0 [000] 1397040.402259: 249153 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1397040.402259: 7231 uncore_imc/data_reads/: swapper 0 [000] 1397040.402259: 1297 uncore_imc/data_writes/: swapper 0 [000] 1397040.402508: 249108 cpu-clock: ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms]) swapper 0 [000] 1397040.402508: 5333 uncore_imc/data_reads/: swapper 0 [000] 1397040.402508: 1008 uncore_imc/data_writes/: Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Link: https://lore.kernel.org/r/20201209005828.21302-1-yao.jin@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Joakim reports that getting "perf stat" for multiple system PMU metrics segfaults: $ perf stat -a -I 1000 -M imx8mm_ddr_write.all,imx8mm_ddr_write.all Segmentation fault $ While the same works without issue for a single metric. The logic in metricgroup__add_metric_sys_event_iter() is broken, in that add_metric() @M argument should be NULL for each new metric. Fix by not passing a holder for that, and rather make local in metricgroup__add_metric_sys_event_iter(). Fixes: be335ec2 ("perf metricgroup: Support adding metrics for system PMUs") Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxarm@openeuler.org Link: https://lore.kernel.org/r/1611050655-44020-1-git-send-email-john.garry@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Metrics containing duration_time cause a segfault: $ perf stat -v -M L1D_Cache_Fill_BW sleep 1 Using CPUID GenuineIntel-6-3D-4 metric expr 64 * l1d.replacement / 1000000000 / duration_time for L1D_Cache_Fill_BW found event duration_time found event l1d.replacement adding {l1d.replacement}:W,duration_time l1d.replacement -> cpu/umask=0x1,(null)=0x1e8483,event=0x51/ Segmentation fault $ In commit c2337d67 ("perf metricgroup: Fix metrics using aliases covering multiple PMUs"), the logic in find_evsel_group() when iter'ing events was changed to not only select events in same group, but also for aliased PMUs. Checking whether events were for aliased PMUs was done by comparing the event PMU name. This was not safe for duration_time event, which has no associated PMU (and no PMU name), so fix by checking if the event PMU name is set also. Committer testing: Reproduced the bug, then, on a: $ grep -m1 ^'model name' /proc/cpuinfo model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz $ We now get: $ perf stat -M L1D_Cache_Fill_BW sleep 1 Performance counter stats for 'sleep 1': 4,141 l1d.replacement:u 1,001,285,107 ns duration_time:u 1.001285107 seconds time elapsed 0.000000000 seconds user 0.001119000 seconds sys $ Detais from -v: Using CPUID GenuineIntel-6-8E-A metric expr 64 * l1d.replacement / 1000000000 / duration_time for L1D_Cache_Fill_BW found event duration_time found event l1d.replacement adding {l1d.replacement}:W,duration_time l1d.replacement -> cpu/(null)=0x1e8483,umask=0x1,event=0x51/ Control descriptor is not initialized Warning: kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor samples Warning: kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor samples l1d.replacement:u: 4592 612201 612201 duration_time:u: 1001478621 1001478621 1001478621 Fixes: c2337d67 ("perf metricgroup: Fix metrics using aliases covering multiple PMUs") Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxarm@openeuler.org Link: https://lore.kernel.org/r/1611159518-226883-1-git-send-email-john.garry@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-