- 23 Aug, 2016 4 commits
-
-
Eric Dumazet authored
Laura tracked poll() [and friends] regression caused by commit e6afc8ac ("udp: remove headers from UDP packets before queueing") udp_poll() needs to know if there is a valid packet in receive queue, even if its payload length is 0. Change first_packet_length() to return an signed int, and use -1 as the indication of an empty queue. Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
Encoding of the metadata was using the padded length as opposed to the real length of the data which is a bug per specification. This has not been an issue todate because all metadatum specified so far has been 32 bit where aligned and data length are the same width. This also includes a bug fix for validating the length of a u16 field. But since there is no metadata of size u16 yes we are fine to include it here. While at it get rid of magic numbers. Fixes: ef6980b6 ("net sched: introduce IFE action") Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Driver never bothered marking the VF's vport with the VF's sw_fid. As a result, FLR flows are not going to clean those vports. If the vport was active when FLRed, re-activating it would lead to a FW assertion. Fixes: dacd88d6 ("qed: IOV l2 functionality") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shmulik Ladkani authored
In b8247f09, "net: ip_finish_output_gso: If skb_gso_network_seglen exceeds MTU, allow segmentation for local udp tunneled skbs" gso skbs arriving from an ingress interface that go through UDP tunneling, are allowed to be fragmented if the resulting encapulated segments exceed the dst mtu of the egress interface. This aligned the behavior of gso skbs to non-gso skbs going through udp encapsulation path. However the non-gso vs gso anomaly is present also in the following cases of a GRE tunnel: - ip_gre in collect_md mode, where TUNNEL_DONT_FRAGMENT is not set (e.g. OvS vport-gre with df_default=false) - ip_gre in nopmtudisc mode, where IFLA_GRE_IGNORE_DF is set In both of the above cases, the non-gso skbs get fragmented, whereas the gso skbs (having skb_gso_network_seglen that exceeds dst mtu) get dropped, as they don't go through the segment+fragment code path. Fix: Setting IPSKB_FRAG_SEGS if the tunnel specified IP_DF bit is NOT set. Tunnels that do set IP_DF, will not go to fragmentation of segments. This preserves behavior of ip_gre in (the default) pmtudisc mode. Fixes: b8247f09 ("net: ip_finish_output_gso: If skb_gso_network_seglen exceeds MTU, allow segmentation for local udp tunneled skbs") Reported-by: wenxu <wenxu@ucloud.cn> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Tested-by: wenxu <wenxu@ucloud.cn> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Aug, 2016 9 commits
-
-
Mike Manning authored
If DAD fails with accept_dad set to 2, global addresses and host routes are incorrectly left in place. Even though disable_ipv6 is set, contrary to documentation, the addresses are not dynamically deleted from the interface. It is only on a subsequent link down/up that these are removed. The fix is not only to set the disable_ipv6 flag, but also to call addrconf_ifdown(), which is the action to carry out when disabling IPv6. This results in the addresses and routes being deleted immediately. The DAD failure for the LL addr is determined as before via netlink, or by the absence of the LL addr (which also previously would have had to be checked for in case of an intervening link down and up). As the call to addrconf_ifdown() requires an rtnl lock, the logic to disable IPv6 when DAD fails is moved to addrconf_dad_work(). Previous behavior: root@vm1:/# sysctl net.ipv6.conf.eth3.accept_dad=2 net.ipv6.conf.eth3.accept_dad = 2 root@vm1:/# ip -6 addr add 2000::10/64 dev eth3 root@vm1:/# ip link set up eth3 root@vm1:/# ip -6 addr show dev eth3 5: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 2000::10/64 scope global valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe43:dd5a/64 scope link tentative dadfailed valid_lft forever preferred_lft forever root@vm1:/# ip -6 route show dev eth3 2000::/64 proto kernel metric 256 fe80::/64 proto kernel metric 256 root@vm1:/# ip link set down eth3 root@vm1:/# ip link set up eth3 root@vm1:/# ip -6 addr show dev eth3 root@vm1:/# ip -6 route show dev eth3 root@vm1:/# New behavior: root@vm1:/# sysctl net.ipv6.conf.eth3.accept_dad=2 net.ipv6.conf.eth3.accept_dad = 2 root@vm1:/# ip -6 addr add 2000::10/64 dev eth3 root@vm1:/# ip link set up eth3 root@vm1:/# ip -6 addr show dev eth3 root@vm1:/# ip -6 route show dev eth3 root@vm1:/# Signed-off-by: Mike Manning <mmanning@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikko Rapeli authored
Fixes these compiler warnings via libc-compat.h when glibc netipx/ipx.h is included before linux/ipx.h: ./linux/ipx.h:9:8: error: redefinition of ‘struct sockaddr_ipx’ ./linux/ipx.h:26:8: error: redefinition of ‘struct ipx_route_definition’ ./linux/ipx.h:32:8: error: redefinition of ‘struct ipx_interface_definition’ ./linux/ipx.h:49:8: error: redefinition of ‘struct ipx_config_data’ ./linux/ipx.h:58:8: error: redefinition of ‘struct ipx_route_def’ Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikko Rapeli authored
Kernel uapi header are supposed to use them. Fixes userspace compile error: linux/openvswitch.h:583:2: error: unknown type name ‘uint32_t’ Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikko Rapeli authored
Fixes userspace compile error: error: field ‘real’ has incomplete type struct timeval real; /* real (wall-clock) time */ Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikko Rapeli authored
Fixes userspace compiler error: error: unknown type name ‘uint32_t’ Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikko Rapeli authored
Fixes userspace compilation errors: error: field ‘addr’ has incomplete type struct sockaddr_in addr; /* IP address and port to send to */ error: field ‘addr’ has incomplete type struct sockaddr_in6 addr; /* IP address and port to send to */ Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikko Rapeli authored
Fixes userspace compilation errors like: error: field ‘addr’ has incomplete type struct sockaddr_in addr; /* IP address and port to send to */ ^ error: field ‘addr’ has incomplete type struct sockaddr_in6 addr; /* IP address and port to send to */ Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikko Rapeli authored
Fixes userspace compilation errors like: error: field ‘iph’ has incomplete type error: field ‘prefix’ has incomplete type Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikko Rapeli authored
Fixes userspace compilation error: error: ‘IFNAMSIZ’ undeclared here (not in a function) Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Aug, 2016 2 commits
-
-
Colin Ian King authored
trivial typo fix in pr_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Romell authored
If the address configured in the device tree is invalid, the driver will fallback to using a random address from the locally administered range. Signed-off-by: Daniel Romell <daro@hms.se> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Aug, 2016 5 commits
-
-
Shrikrishna Khare authored
'Commit 3c8b3efc ("vmxnet3: allow variable length transmit data ring buffer")' changed the size of the buffers in the tx data ring from a fixed size of 128 bytes to a variable size. However, while copying data to the data ring, vmxnet3_copy_hdr continues to carry the old code that assumes fixed buffer size of 128. This patch fixes it by adding correct offset based on the actual data ring buffer size. Signed-off-by: Guolin Yang <gyang@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
The RAR entry for the SAN MAC address was being cleared when we were clearing the VMDq pool bits. In order to prevent this we need to add an extra check to protect the SAN MAC from being cleared. Fixes: 6e982aea ("ixgbe: Clear stale pool mappings") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Pool index has to be converted by get_pool helper to work correctly for egress pool. In mlxsw the egress pool index starts from 0. Fixes: 0f433fa0 ("mlxsw: spectrum_buffers: Implement shared buffer configuration") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gao Feng authored
The sk->sk_state is bits flag, so need use bit operation check instead of value check. Signed-off-by: Gao Feng <fgao@ikuai8.com> Tested-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Because otherwise when crc computation is still needed it's way more expensive than on a linear buffer to the point that it affects performance. It's so expensive that netperf test gives a perf output as below: Overhead Command Shared Object Symbol 18,62% netserver [kernel.vmlinux] [k] crc32_generic_shift 2,57% netserver [kernel.vmlinux] [k] __pskb_pull_tail 1,94% netserver [kernel.vmlinux] [k] fib_table_lookup 1,90% netserver [kernel.vmlinux] [k] copy_user_enhanced_fast_string 1,66% swapper [kernel.vmlinux] [k] intel_idle 1,63% netserver [kernel.vmlinux] [k] _raw_spin_lock 1,59% netserver [sctp] [k] sctp_packet_transmit 1,55% netserver [kernel.vmlinux] [k] memcpy_erms 1,42% netserver [sctp] [k] sctp_rcv # netperf -H 192.168.10.1 -l 10 -t SCTP_STREAM -cC -- -m 12000 SCTP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.10.1 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 212992 212992 12000 10.00 3016.42 2.88 3.78 1.874 2.462 After patch: Overhead Command Shared Object Symbol 2,75% netserver [kernel.vmlinux] [k] memcpy_erms 2,63% netserver [kernel.vmlinux] [k] copy_user_enhanced_fast_string 2,39% netserver [kernel.vmlinux] [k] fib_table_lookup 2,04% netserver [kernel.vmlinux] [k] __pskb_pull_tail 1,91% netserver [kernel.vmlinux] [k] _raw_spin_lock 1,91% netserver [sctp] [k] sctp_packet_transmit 1,72% netserver [mlx4_en] [k] mlx4_en_process_rx_cq 1,68% netserver [sctp] [k] sctp_rcv # netperf -H 192.168.10.1 -l 10 -t SCTP_STREAM -cC -- -m 12000 SCTP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.10.1 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 212992 212992 12000 10.00 3681.77 3.83 3.46 2.045 1.849 Fixes: 3acb50c1 ("sctp: delay as much as possible skb_linearize") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Aug, 2016 20 commits
-
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes 2016-08-16 This series includes some bug fixes for mlx5e driver. From Saeed and Tariq, Optimize MTU change to not reset when it is not required. From Paul, Command interface message length check to speedup firmware command preparation. From Mohamad, Save pci state when pci error is detected. From Amir, Flow counters "lastuse" update fix. From Hadar, Use correct flow dissector key on flower offloading. Plus a small optimization for switchdev hardware id query. From Or, three patches to address some E-Switch offloads issues. For -stable of 4.6.y and 4.7.y: net/mlx5e: Use correct flow dissector key on flower offloading net/mlx5: Fix pci error recovery flow net/mlx5: Added missing check of msg length in verifying its signature ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
When we are in the switchdev/offloads mode, HW matching is done as dictated by the offloaded rules and hence we don't need to enable the ACLs mechanism used by the legacy mode. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
While adding actual offloading support to the new switchdev mode, we didn't change the setup of the send-to-vport rules to put them in the slow path table, fix that. Fixes: 1033665e ('net/mlx5: E-Switch, Use two priorities for SRIOV offloads mode') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
Since mlx5 has also the NONE e-switch mode, we must translate from mlx5 mode to devlink mode on the devlink eswitch mode get call, do that. While here, remove the mlx5_ prefix from the static function helpers that deal with the mode to comply with the rest of the code. Fixes: c930a3ad ('net/mlx5e: Add devlink based SRIOV mode change') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hadar Hen Zion authored
Avoid firmware command execution each time the switchdev HW ID attr get call is made. We do that by reading the ID (PF NIC MAC) only once at load time and store it on the representor structure. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hadar Hen Zion authored
The wrong key is used when extracting the address type field set by the flower offload code. We have to use the control key and not the basic key, fix that. Fixes: e3a2b7ed ('net/mlx5e: Support offload cls_flower with drop action') Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Set lastuse statistic, when number of packets is changed compared to last query. This was wrongly dropped when bulk counter reading was added. Fixes: a351a1b0 ('net/mlx5: Introduce bulk reading of flow counters') Signed-off-by: Amir Vadai <amirva@mellanox.com> Reported-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Blakey authored
Set and verify signature calculates the signature for each of the mailbox nodes, even for those that are unused (from cache). Added a missing length check to set and verify only those which are used. While here, also moved the setting of msg's nodes token to where we already go over them. This saves a pass because checksum is disabled, and the only useful thing remaining that set signature does is setting the token. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohamad Haj Yahia authored
When PCI error is detected we should save the state of the pci prior to disabling it. Also when receiving pci slot reset call we need to verify that the device is responsive. Fixes: 89d44f0a ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
Avoid unnecessary interface down/up operations upon an MTU change when it does not affect the rings configuration. Fixes: 461017cb ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
Port mtu shouldn't be written to hardware on every single interface open. Here we set it only when needed, on change_mtu and netdevice creation. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xunlei Pang authored
1) Fix one typo: s/tn/tp/ 2) Fix the description about the "u" bits. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Oliver Neukum says: ==================== fixes to kaweth in response to Umap2 testing These patches fix an oops in firmware downloading and an oops due to a memory allocation failure ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Neukum authored
Just return an error upon failure. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Neukum authored
This fixes the oops discovered by the Umap2 project and Alan Stern. The intf member needs to be set before the firmware is downloaded. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
It was failing on successful registration returning meaningless errors. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 55954f3b ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file") Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When tcp_sendmsg() allocates a fresh and empty skb, it puts it at the tail of the write queue using tcp_add_write_queue_tail() Then it attempts to copy user data into this fresh skb. If the copy fails, we undo the work and remove the fresh skb. Unfortunately, this undo lacks the change done to tp->highest_sack and we can leave a dangling pointer (to a freed skb) Later, tcp_xmit_retransmit_queue() can dereference this pointer and access freed memory. For regular kernels where memory is not unmapped, this might cause SACK bugs because tcp_highest_sack_seq() is buggy, returning garbage instead of tp->snd_nxt, but with various debug features like CONFIG_DEBUG_PAGEALLOC, this can crash the kernel. This bug was found by Marco Grassi thanks to syzkaller. Fixes: 6859d494 ("[TCP]: Abstract tp->highest_sack accessing & point to next skb") Reported-by: Marco Grassi <marco.gra@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
At present the code to check in kdump kernel was not disabling allocation of resources when CONFIG_CHELSIO_T4_DCB is defined, move the code outside #defines so that it gets disabled irrespective of #define, when in kdump kernel. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Daney authored
The ethtool_ops .get_regs function attempts to read the nonexistent register NIC_QSET_SQ_0_7_CNM_CHG, which produces a "bus error" type OOPs. Fix by not attempting to read, and removing the definition of, NIC_QSET_SQ_0_7_CNM_CHG. A zero is written into the register dump to keep the layout unchanged. Signed-off-by: David Daney <david.daney@cavium.com> Cc: <stable@vger.kernel.org> # 4.4.x- Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Driver uses netif_tx_queue_stopped() to make sure the xmit_more indication will be honored, but that only checks for DRV_XOFF. At the same time, it's possible that during transmission the DQL will close the transmission queue with STACK_XOFF indication. In re-configuration flows, when the threshold is relatively low, it's possible that the device has no pending tranmissions, and during tranmission the driver would miss doorbelling the HW. Since there are no pending transmission, there will never be a Tx completion [and thus the DQL would not remove the STACK_XOFF indication], eventually causing the Tx queue to timeout. While we're at it - also doorbell in case driver has to close the transmission queue on its own [although this one is less important - if the ring is full, we're bound to receive completion eventually, which means the doorbell would only be postponed and not indefinetly blocked]. Fixes: 312e0676 ("qede: Utilize xmit_more") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-