Allow users to append 'clear' to an existing trigger in order to have
the hash table cleared.

This expands the hist trigger syntax from this:
    # echo hist:keys=xxx:vals=yyy:sort=zzz.descending:pause/cont \
           [ if filter] >> event/trigger

to this:

    # echo hist:keys=xxx:vals=yyy:sort=zzz.descending:pause/cont/clear \
          [ if filter] >> event/trigger

Link: http://lkml.kernel.org/r/ae15dd0d9b2f7af07a37c1ff682063e2dbcdf160.1457029949.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Allow users to append 'pause' or 'continue' to an existing trigger in
order to have it paused or to have a paused trace continue.

This expands the hist trigger syntax from this:
    # echo hist:keys=xxx:vals=yyy:sort=zzz.descending \
          [ if filter] >> event/trigger

to this:

    # echo hist:keys=xxx:vals=yyy:sort=zzz.descending:pause or cont \
          [ if filter] >> event/trigger

Link: http://lkml.kernel.org/r/b672a92c14702cb924cdf6fc27ea1809bed04907.1457029949.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Allow users to specify keys and/or values to sort on.  With this
addition, keys and values specified using the 'keys=' and 'vals='
keywords can be used to sort the hist trigger output via a new 'sort='
keyword.  If multiple sort keys are specified, the output will be
sorted using the second key as a secondary sort key, etc.  The default
sort order is ascending; if the user wants a different sort order,
'.descending' can be appended to the specific sort key.  Before this
addition, output was always sorted by 'hitcount' in ascending order.

This expands the hist trigger syntax from this:

    # echo hist:keys=xxx:vals=yyy \
          [ if filter] > event/trigger

to this:

    # echo hist:keys=xxx:vals=yyy:sort=zzz.descending \
          [ if filter] > event/trigger

Link: http://lkml.kernel.org/r/b30a41db66ba486979c4f987aff5fab500ea53b3.1457029949.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Allow users to specify multiple trace event fields to use in keys by
allowing multiple fields in the 'keys=' keyword.  With this addition,
any unique combination of any of the fields named in the 'keys'
keyword will result in a new entry being added to the hash table.

Link: http://lkml.kernel.org/r/0cfa24e6ac3b0dcece7737d94aa1f322ae3afc4b.1457029949.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Allow users to specify trace event fields to use in aggregated sums
via a new 'vals=' keyword.  Before this addition, the only aggregated
sum supported was the implied value 'hitcount'.  With this addition,
'hitcount' is also supported as an explicit value field, as is any
numeric trace event field.

This expands the hist trigger syntax from this:

  # echo hist:keys=xxx [ if filter] > event/trigger

to this:

  # echo hist:keys=xxx:vals=yyy [ if filter] > event/trigger

Link: http://lkml.kernel.org/r/2a5d1adb5ba6c65d7bb2148e379f2fed47f29a68.1457029949.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

'hist' triggers allow users to continually aggregate trace events,
which can then be viewed afterwards by simply reading a 'hist' file
containing the aggregation in a human-readable format.

The basic idea is very simple and boils down to a mechanism whereby
trace events, rather than being exhaustively dumped in raw form and
viewed directly, are automatically 'compressed' into meaningful tables
completely defined by the user.

This is done strictly via single-line command-line commands and
without the aid of any kind of programming language or interpreter.

A surprising number of typical use cases can be accomplished by users
via this simple mechanism.  In fact, a large number of the tasks that
users typically do using the more complicated script-based tracing
tools, at least during the initial stages of an investigation, can be
accomplished by simply specifying a set of keys and values to be used
in the creation of a hash table.

The Linux kernel trace event subsystem happens to provide an extensive
list of keys and values ready-made for such a purpose in the form of
the event format files associated with each trace event.  By simply
consulting the format file for field names of interest and by plugging
them into the hist trigger command, users can create an endless number
of useful aggregations to help with investigating various properties
of the system.  See Documentation/trace/events.txt for examples.

hist triggers are implemented on top of the existing event trigger
infrastructure, and as such are consistent with the existing triggers
from a user's perspective as well.

The basic syntax follows the existing trigger syntax.  Users start an
aggregation by writing a 'hist' trigger to the event of interest's
trigger file:

  # echo hist:keys=xxx [ if filter] > event/trigger

Once a hist trigger has been set up, by default it continually
aggregates every matching event into a hash table using the event key
and a value field named 'hitcount'.

To view the aggregation at any point in time, simply read the 'hist'
file in the same directory as the 'trigger' file:

  # cat event/hist

The detailed syntax provides additional options for user control, and
is described exhaustively in Documentation/trace/events.txt and in the
virtual tracing/README file in the tracing subsystem.

Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Make it clear exactly how many keys and values are supported through
better defines, and add 1 to the vals count, since normally clients
want support for at least a hitcount and two other values.

Also, note the error return value for tracing_map_add_key/val_field()
in the comments.

Link: http://lkml.kernel.org/r/6696fa02ebc716aa344c27a571a2afaa25e5b4d4.1457029949.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The config option for TRACING_MAP has "default n", which is not needed
because the default of configs is 'n'.

Also, since the TRACING_MAP has no config prompt, there's no reason to
include "If in doubt, say N" in the help text.

Fixed a typo in the comments of tracing_map.h.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add tracing_map, a special-purpose lock-free map for tracing.

tracing_map is designed to aggregate or 'sum' one or more values
associated with a specific object of type tracing_map_elt, which
is associated by the map to a given key.

It provides various hooks allowing per-tracer customization and is
separated out into a separate file in order to allow it to be shared
between multiple tracers, but isn't meant to be generally used outside
of that context.

The tracing_map implementation was inspired by lock-free map
algorithms originated by Dr. Cliff Click:

 http://www.azulsystems.com/blog/cliff/2007-03-26-non-blocking-hashtable
 http://www.azulsystems.com/events/javaone_2007/2007_LockFreeHash.pdf

Link: http://lkml.kernel.org/r/b43d68d1add33582a396f553c8ef705a33a6a748.1449767187.git.tom.zanussi@linux.intel.comSigned-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add documentation to the ftrace.txt file in Documentation to describe the
event-fork option. Also add the missing "display-graph" option now that it
shows up in the trace_options file (from a previous commit).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add the infrastructure needed to have the PIDs in set_event_pid to
automatically add PIDs of the children of the tasks that have their PIDs in
set_event_pid. This will also remove PIDs from set_event_pid when a task
exits

This is implemented by adding hooks into the fork and exit tracepoints. On
fork, the PIDs are added to the list, and on exit, they are removed.

Add a new option called event_fork that when set, PIDs in set_event_pid will
automatically get their children PIDs added when they fork, as well as any
task that exits will have its PID removed from set_event_pid.

This works for instances as well.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

In order to add the ability to let tasks that are filtered by the events
have their children also be traced on fork (and then not traced on exit),
convert the array into a pid bitmask. Most of the time the number of pids is
only 32768 pids or a 4k bitmask, which is the same size as the default list
currently is, and that list could grow if more pids are listed.

This also greatly simplifies the code.
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The name "check_ignore_pid" is confusing in trying to figure out if the pid
should be ignored or not. Rename it to "ignore_this_task" which is pretty
straight forward, as a task (not a pid) is passed in, and should if true
should be ignored.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull device mapper fix from Mike Snitzer:
 "Fix for earlier 4.6-rc4 stable@ commit that introduced improper use of
  write lock in cmd_read_lock() -- due to cut-n-paste gone awry (and
  sparse didn't catch it)"

* tag 'dm-4.6-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache metadata: fix cmd_read_lock() acquiring write lock

Commit 9567366f ("dm cache metadata: fix READ_LOCK macros and
cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in
cmd_read_lock(), yet up_read() is used to release the lock in
READ_UNLOCK().  Fix it.

Fixes: 9567366f ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Samy <f.fallen45@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull char/misc fixes from Greg KH:
 "Here are some small char/misc driver fixes for 4.6-rc4.  Full details
  are in the shortlog, nothing major here.

  These have all been in linux-next for a while with no reported issues"

* tag 'char-misc-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: do not leak free page on kmalloc failure
  lkdtm: fix memory leak of base
  lkdtm: fix memory leak of val
  extcon: palmas: Drop stray IRQF_EARLY_RESUME flag

Pull misc fixes from Greg KH:
 "Here are three small fixes for 4.6-rc4.

  Two fix up some lz4 issues with big endian systems, and the remaining
  one resolves a minor debugfs issue that was reported.

  All have been in linux-next with no reported issues"

* tag 'driver-core-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  lib: lz4: cleanup unaligned access efficiency detection
  lib: lz4: fixed zram with lz4 on big endian machines
  debugfs: Make automount point inodes permanently empty

Pull USB driver fixes from Greg KH:
 "Here are some small USB fixes for 4.6-rc4.

  Mostly xhci fixes for reported issues, a UAS bug that has hit a number
  of people, including stable tree users, and a few other minor things.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: hcd: out of bounds access in for_each_companion
  USB: uas: Add a new NO_REPORT_LUNS quirk
  USB: uas: Limit qdepth at the scsi-host level
  doc: usb: Fix typo in gadget_multi documentation
  usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value
  xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
  usb: xhci: fix wild pointers in xhci_mem_cleanup
  usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys
  usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT
  xhci: resume USB 3 roothub first
  usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
  cdc-acm: fix crash if flushed with nothing buffered

Pull dmaengine fixes from Vinod Koul:
 "This time we have some odd fixes in hsu, edma, omap and xilinx.

  Usual fixes and nothing special"

* tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dw: fix master selection
  dmaengine: edma: special case slot limit workaround
  dmaengine: edma: Remove dynamic TPTC power management feature
  dmaengine: vdma: don't crash when bad channel is requested
  dmaengine: omap-dma: Do not suppress interrupts for memcpy
  dmaengine: omap-dma: Fix polled channel completion detection and handling
  dmaengine: hsu: correct use of channel status register
  dmaengine: hsu: correct residue calculation of active descriptor
  dmaengine: hsu: set HSU_CH_MTSR to memory width

Pull locking fixlet from Ingo Molnar:
 "Fixes a build warning on certain Kconfig combinations"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Fix print_collision() unused warning

Pull EFI fix from Ingo Molnar:
 "An arm64 boot crash fix"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping

Pull block fixes from Jens Axboe:
 "A few fixes for the current series. This contains:

   - Two fixes for NVMe:

     One fixes a reset race that can be triggered by repeated
     insert/removal of the module.

     The other fixes an issue on some platforms, where we get probe
     timeouts since legacy interrupts isn't working.  This used not to
     be a problem since we had the worker thread poll for completions,
     but since that was killed off, it means those poor souls can't
     successfully probe their NVMe device.  Use a proper IRQ check and
     probe (msi-x -> msi ->legacy), like most other drivers to work
     around this.  Both from Keith.

   - A loop corruption issue with offset in iters, from Ming Lei.

   - A fix for not having the partition stat per cpu ref count
     initialized before sending out the KOBJ_ADD, which could cause user
     space to access the counter prior to initialization.  Also from
     Ming Lei.

   - A fix for using the wrong congestion state, from Kaixu Xia"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: loop: fix filesystem corruption in case of aio/dio
  NVMe: Always use MSI/MSI-x interrupts
  NVMe: Fix reset/remove race
  writeback: fix the wrong congested state variable definition
  block: partition: initialize percpuref before sending out KOBJ_ADD

Pull libnvdimm fixes from Ross Zwisler:
 "Two fixes:

   - Fix memcpy_from_pmem() to fallback to memcpy() for architectures
     where CONFIG_ARCH_HAS_PMEM_API=n.

   - Add a comment explaining why we write data twice when clearing
     poison in pmem_do_bvec().

  This has passed a boot test on an X86_32 config, which was the
  architecture where issue #1 above was first noticed"

Dan Williams adds:
 "We're giving this multi-maintainer setup a shot, so expect libnvdimm
  pull requests from either Ross or I going forward"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm, pmem: clarify the write+clear_poison+write flow
  pmem: fix BUG() error in pmem.h:48 on X86_32

Pull MTD fix from Brian Norris:
 "One MTD fix for v4.6-rc4:

  In the v4.4 cycle, we relaxed the requirement for assigning
  mtd->owner, but we didn't remove this error case.  It's hit only
  by drivers that are both:

   (a) using nand_scan() directly
  and
   (b) built as modules

  We haven't seen explicit complaints about this (most use cases don't
  fit one or both of the above), but we should definitely not be
  BUG()'ing here"

* tag 'for-linus-20160415' of git://git.infradead.org/linux-mtd:
  mtd: nand: Drop mtd.owner requirement in nand_scan

Pull MMC fixes from Ulf Hansson:
 "Here are a couple of mmc fixes intended for v4.6 rc4.

  Regarding the fix for the regression about mmcblk device indexes.  The
  approach taken to solve the problem seems to be good enough.  There
  were some discussions around the solution, but it seems like people
  were happy about it in the end.

  MMC core:
   - Restore similar old behaviour when assigning mmcblk device indexes

  MMC host:
   - tegra: Disable UHS-I modes for Tegra124 to fix regression"

* tag 'mmc-v4.6-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: tegra: Disable UHS-I modes for Tegra124
  mmc: block: Use the mmc host device index as the mmcblk device index

Pull drm fixes from Dave Airlie:
 "This contains fixes for exynos, amdgpu, radeon, i915 and qxl.

  It also contains some fixes to the core drm edid parser.

  qxl:
   - fix for a cursor hotspot issue

  radeon:
   - some MST fixes that I've been running locally and make my monitor a
     bit happier

  exynos:
   - fix some regressions and build fixes

  amdgpu:
   - a couple of small fixes

  i915:
   - two DP MST fixes and a couple of other regression fixes

  Nothing too out of the ordinary or surprising at this point"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/exynos: Use VIDEO_SAMSUNG_S5P_G2D=n as G2D Kconfig dependency
  drm/exynos: fix a warning message
  drm/exynos: mic: fix an error code
  drm/exynos: fimd: fix broken dp_clock control
  drm/exynos: build fbdev code conditionally
  drm/exynos: fix adjusted_mode pointer in exynos_plane_mode_set
  drm/exynos: fix error handling in exynos_drm_subdrv_open
  drm/amd/amdgpu: fix irq domain remove for tonga ih
  drm/i915: fix deadlock on lid open
  drm/radeon: use helper for mst connector dpms.
  drm/radeon/mst: port some MST setup code from DAL.
  drm/amdgpu: add invisible pin size statistic
  drm/edid: Fix DMT 1024x768@43Hz (interlaced) timings
  drm/i915: Exit cherryview_irq_handler() after one pass
  drm/i915: Call intel_dp_mst_resume() before resuming displays
  drm/i915: Fix race condition in intel_dp_destroy_mst_connector()
  drm/edid: Fix parsing of EDID 1.4 Established Timings III descriptor
  drm/edid: Fix EDID Established Timings I and II
  drm/qxl: fix cursor position with non-zero hotspot

Pull parisc ftrace fixes from Helge Deller:
 "This is (most likely) the last pull request for v4.6 for the parisc
  architecture.

  It fixes the FTRACE feature for parisc, which is horribly broken since
   quite some time and doesn't even compile.  This patch just fixes the
  bare minimum (it actually removes more lines than it adds), so that
  the function tracer works again on 32- and 64bit kernels.

  I've queued up additional patches on top of this patch which e.g. add
  the syscall tracer, but those have to wait for the merge window for
  v4.7."

* 'parisc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix ftrace function tracer

The ACPI specification does not specify the state of data after a clear
poison operation.  Potential future libnvdimm bus implementations for
other architectures also might not specify or disagree on the state of
data after clear poison.  Clarify why we write twice.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>

Starting from commit e36f6204(block: split bios to max possible length),
block core starts to split bio in the middle of bvec.

Unfortunately loop dio/aio doesn't consider this situation, and
always treat 'iter.iov_offset' as zero. Then filesystem corruption
is observed.

This patch figures out the offset of the base bvevc via
'bio->bi_iter.bi_bvec_done' and fixes the issue by passing the offset
to iov iterator.

Fixes: e36f6204 (block: split bios to max possible length)
Cc: Keith Busch <keith.busch@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org (4.5)
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: a binutils fix, an lguest fix, an mcelog fix and a missing
  documentation fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Avoid using object after free in genpool
  lguest, x86/entry/32: Fix handling of guest syscalls using interrupt gates
  x86/build: Build compressed x86 kernels as PIE
  x86/mm/pkeys: Add missing Documentation

Pull mm gup cleanup from Ingo Molnar:
 "This removes the ugly get-user-pages API hack, now that all upstream
  code has been migrated to it"

("ugly" is putting it mildly. But it worked.. - Linus)

* 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm/gup: Remove the macro overload API migration helpers from the get_user*() APIs

Pull device mapper fixes from Mike Snitzer:

 - fix a 4.6-rc1 bio-based DM 'struct dm_target_io' leak in an error
   path

 - stable@ fix for DM cache metadata's READ_LOCK macros that were
   incorrectly returning error if the block manager was in read-only
   mode; also cleanup multi-statement macros to use do {} while(0)

* tag 'dm-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
  dm: fix dm_target_io leak if clone_bio() returns an error

Merge tag 'pwm/for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fix from Thierry Reding:
 "A single one-line fix to turn the regmap cache from an RB-tree to a
  flat cache to avoid lockdep and abort issues"

* tag 'pwm/for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: fsl-ftm: Use flat regmap cache

Pull sound fixes from Takashi Iwai:
 "We've had a very calm development cycle, so far.  Here are the few
  fixes for HD-audio and USB-audio, all of which are small and easy"

* tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix inconsistent monitor_present state until repoll
  ALSA: hda - Fix regression of monitor_present flag in eld proc file
  ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock
  ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s
  ALSA: sscape: Use correct format identifier for size_t
  ALSA: usb-audio: Add a quirk for Plantronics BT300
  ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320
  ALSA: hda - Bind with i915 only when Intel graphics is present

Pull mailbox fixes from Jussi Brar:
 "Misc fixes:

  mailbox-test driver:
   - prevent memory leak and another cosmetic change

  mailbox:
   - change the returned error code

  Xgene driver:
   - return -ENOMEM instead of PTR_ERR for failed devm_kzalloc"

* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: Stop using ENOSYS for anything other than unimplemented syscalls
  mailbox: mailbox-test: Prevent memory leak
  mailbox: mailbox-test: Use more consistent format for calling copy_from_user()
  mailbox: xgene-slimpro: Fix wrong test for devm_kzalloc