- 13 Nov, 2019 10 commits
-
-
Arnd Bergmann authored
The ioctl definitions for XFS_IOC_SWAPEXT, XFS_IOC_FSBULKSTAT and XFS_IOC_FSBULKSTAT_SINGLE are part of libxfs and based on time_t. The definition for time_t differs between current kernels and coming 32-bit libc variants that define it as 64-bit. For most ioctls, that means the kernel has to be able to handle two different command codes based on the different structure sizes. The same solution could be applied for XFS_IOC_SWAPEXT, but it would not work for XFS_IOC_FSBULKSTAT and XFS_IOC_FSBULKSTAT_SINGLE because the structure with the time_t is passed through an indirect pointer, and the command number itself is based on struct xfs_fsop_bulkreq, which does not differ based on time_t. This means any solution that can be applied requires a change of the ABI definition in the xfs_fs.h header file, as well as doing the same change in any user application that contains a copy of this header. The usual solution would be to define a replacement structure and use conditional compilation for the ioctl command codes to use one or the other, such as #define XFS_IOC_FSBULKSTAT_OLD _IOWR('X', 101, struct xfs_fsop_bulkreq) #define XFS_IOC_FSBULKSTAT_NEW _IOWR('X', 129, struct xfs_fsop_bulkreq) #define XFS_IOC_FSBULKSTAT ((sizeof(time_t) == sizeof(__kernel_long_t)) ? \ XFS_IOC_FSBULKSTAT_OLD : XFS_IOC_FSBULKSTAT_NEW) After this, the kernel would be able to implement both XFS_IOC_FSBULKSTAT_OLD and XFS_IOC_FSBULKSTAT_NEW handlers on 32-bit architectures with the correct ABI for either definition of time_t. However, as long as two observations are true, a much simpler solution can be used: 1. xfsprogs is the only user space project that has a copy of this header 2. xfsprogs already has a replacement for all three affected ioctl commands, based on the xfs_bulkstat structure to pass 64-bit timestamps regardless of the architecture Based on those assumptions, changing xfs_bstime to use __kernel_long_t instead of time_t in both the kernel and in xfsprogs preserves the current ABI for any libc definition of time_t and solves the problem of passing 64-bit timestamps to 32-bit user space. If either of the two assumptions is invalid, more discussion is needed for coming up with a way to fix as much of the affected user space code as possible. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
kaixuxia authored
When target_ip exists in xfs_rename(), the xfs_dir_replace() call may need to hold the AGF lock to allocate more blocks, and then invoking the xfs_droplink() call to hold AGI lock to drop target_ip onto the unlinked list, so we get the lock order AGF->AGI. This would break the ordering constraint on AGI and AGF locking - inode allocation locks the AGI, then can allocate a new extent for new inodes, locking the AGF after the AGI. In this patch we check whether the replace operation need more blocks firstly. If so, acquire the agi lock firstly to preserve locking order(AGI/AGF). Actually, the locking order problem only occurs when we are locking the AGI/AGF of the same AG. For multiple AGs the AGI lock will be released after the transaction committed. Signed-off-by:
kaixuxia <kaixuxia@tencent.com> Reviewed-by:
-
Christoph Hellwig authored
We have the exact same memset in xfs_inode_alloc, which is always called just before xfs_iread. Signed-off-by:
-
Christoph Hellwig authored
There is no point in splitting the fields like this in an purely in-memory structure. Signed-off-by:
-
Christoph Hellwig authored
struct xfs_icdinode is purely an in-memory data structure, so don't use a log on-disk structure for it. This simplifies the code a bit, and also reduces our include hell slightly. Signed-off-by:
-
Christoph Hellwig authored
Instead of causing a relatively expensive indirect call for each hashing and comparism of a file name in a directory just use an inline function and a simple branch on the ASCII CI bit. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Darrick J. Wong authored
Convert the last of the open coded corruption check and report idioms to use the XFS_IS_CORRUPT macro. Signed-off-by:
-
Darrick J. Wong authored
The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: -
Darrick J. Wong authored
Add a new macro, XFS_IS_CORRUPT, which we will use to integrate some corruption reporting when the corruption test expression is true. This will be used in the next patch to remove the ugly XFS_WANT_CORRUPT* macros. Signed-off-by:
-
- 11 Nov, 2019 30 commits
-
-
Darrick J. Wong authored
Make sure we attach dquots to both inodes before swapping their extents. This was found via manual code inspection by looking for places where we could call xfs_trans_mod_dquot without dquots attached to inodes, and confirmed by instrumenting the kernel and running xfs/328. Signed-off-by:
-
Darrick J. Wong authored
In xfs_iomap_write_unwritten, we need to ensure that dquots are attached to the inode and quota blocks reserved so that we capture in the quota counters any blocks allocated to handle a bmbt split. This can happen on the first unwritten extent conversion to a preallocated sparse file on a fresh mount. This was found by running generic/311 with quotas enabled. The bug seems to have been introduced in "[XFS] rework iocore infrastructure, remove some code and make it more" from ~2002? Signed-off-by:
-
Darrick J. Wong authored
Coverity points out that xfs_btree_islastblock doesn't check the return value of xfs_btree_check_block. Since the question "Does the cursor point to the last block in this level?" only makes sense if the caller previously performed a lookup or seek operation, the block should already have been checked. Therefore, check the return value in an ASSERT and turn the whole thing into a static inline predicate. Coverity-id: 114069 Signed-off-by:
-
Christoph Hellwig authored
Move the code for extracting the incore header to the only caller that didn't already do that. Signed-off-by:
-
Christoph Hellwig authored
There is no real need for xfs_dir2_data_freescan wrapper, so rename xfs_dir2_data_freescan_int to xfs_dir2_data_freescan and let the callers dereference the mount pointer from the inode. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Replace the ->data_get_ftype and ->data_put_ftype dir ops methods with directly called xfs_dir2_data_get_ftype and xfs_dir2_data_put_ftype helpers that takes care of the differences between the directory format with and without the file type field. Signed-off-by:
-
Christoph Hellwig authored
Replace the ->data_bestfree_p dir ops method with a directly called xfs_dir2_data_bestfree_p helper that takes care of the differences between the v4 and v5 on-disk format. Signed-off-by:
-
Christoph Hellwig authored
Remove the XFS_DIR2_DATA_ENTSIZE and XFS_DIR3_DATA_ENTSIZE and open code them in their only caller, which now becomes so simple that we can turn it into an inline function. Signed-off-by:
-
Christoph Hellwig authored
Move the data block fixed offsets towards our structure for dir/attr geometry parameters. Signed-off-by:
-
Christoph Hellwig authored
Replace the ->data_entry_tag_p dir ops method with a directly called xfs_dir2_data_entry_tag_p helper that takes care of the differences between the directory format with and without the file type field. Signed-off-by:
-
Christoph Hellwig authored
Replace the ->data_entsize dir ops method with a directly called xfs_dir2_data_entsize helper that takes care of the differences between the directory format with and without the file type field. Signed-off-by:
-
Christoph Hellwig authored
All the callers really want an offset into the buffer, so adopt the helper to return that instead. Signed-off-by:
-
Christoph Hellwig authored
Now that all users use the data_entry_offset field this method is unused and can be removed. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Replace the two users of the ->data_unused_p dir ops method with a direct calculation using ->data_entry_offset, and clean them up a bit. xfs_dir2_sf_to_block already had an offset variable containing the value of ->data_entry_offset, which we are now reusing to make it clear that the initial freespace entry is at the same place that we later fill in the 1 entry, and in xfs_dir3_data_init the function is cleaned up a bit to keep the initialization of fields of a given structure close to each other, and to avoid a local variable. Signed-off-by:
-
Christoph Hellwig authored
The only user of the ->data_dot_entry_p and ->data_dotdot_entry_p methods is the xfs_dir2_sf_to_block function that builds block format directorys from a short form directory. It already uses pointer arithmetics with a offset variable to do so for the real entries in the directory, so switch the generation of the . and .. entries to the same scheme, and clean up some of the later pointer arithmetics to use bp->b_addr directly as well and avoid some casts. Signed-off-by:
-
Christoph Hellwig authored
The data_dotdot_offset value is always equal to data_entry_offset plus the fixed size of the "." entry. Right now calculating that fixed size requires an indirect call, but by the end of this series it will be an inline function that can be constant folded. Signed-off-by:
-
Christoph Hellwig authored
The data_dot_offset value is always equal to data_entry_offset given that "." is always the first entry in the directory. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Replace the ->sf_get_ftype and ->sf_put_ftype dir ops methods with directly called xfs_dir2_sf_get_ftype and xfs_dir2_sf_put_ftype helpers that takes care of the differences between the directory format with and without the file type field. Signed-off-by:
-
Christoph Hellwig authored
Replace the ->sf_get_ino and ->sf_put_ino dir ops methods with directly called xfs_dir2_sf_get_ino and xfs_dir2_sf_put_ino helpers that take care of the difference between the directory format with and without the file type field. Also move xfs_dir2_sf_get_parent_ino and xfs_dir2_sf_put_parent_ino to xfs_dir2_sf.c with the rest of the low-level short form entry handling and use XFS_MAXINUMBER istead of opencoded constants. Signed-off-by:
-
Christoph Hellwig authored
Just check for file-type enabled directories directly. Signed-off-by:
-
Christoph Hellwig authored
The parent inode handling is the same for all directory format variants, just use direct calls instead of going through a pointless indirect call. Signed-off-by:
-
