- 29 Jan, 2024 36 commits
-
-
Anthony Koo authored
- Add control flag for IPS residency profiling Reviewed-by:
Tom Chung <chiahsuan.chung@amd.com> Acked-by:
Anthony Koo <anthony.koo@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alvin Lee authored
[why] There exists scenarios where the split index for subvp can be pipe index 0. The assumption in FW is that the split index won't be 0 but this is incorrect. [how] Instead populate non-split cases to be 0xF to differentiate between split and non-split. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
-
Fangzhi Zuo authored
[why] odm calculation is missing for pipe split policy determination and cause Underflow/Corruption issue. [how] Add the odm calculation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Fangzhi Zuo <jerry.zuo@amd.com> Tested-by:
-
Mounika Adhuri authored
[why] To Remove warnings of clk_mgr. [How] Added code to remove warnings by resolving redefinations. Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Mounika Adhuri <moadhuri@amd.com> Tested-by:
-
Charlene Liu authored
[why] Audio channel layout for 5.1ch is not correct [how] Add the audio layout for 5.1ch (channel_count = 6). Add divided by zero check. Reviewed-by:
Zhan Liu <zhan.liu@amd.com> Acked-by:
-
Nicholas Susanto authored
[Why] On 14us for exit latency time causes underflow for 8K monitor with HDR on. Increasing the latency to 28us fixes the underflow. [How] Increase the latency to 28us. This workaround should be sufficient before we figure out why SR exit so long. Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by:
Nicholas Susanto <nicholas.susanto@amd.com> Tested-by:
-
Wenjing Liu authored
[why] In current code, we recognize a pipe as a phantom pipe if it references the same phantom stream. However it can also a phantom split pipe. If the phantom split pipe has a smaller pipe index than the phantom pipe we will mistakenly use the phantom split pipe as the phantom pipe. This causes an incorrect subvp configuration where the first half of the screen is flashing solid white image. [how] Add additional check that the pipe needs to be an OTG master pipe. Reviewed-by:
-
Wenjing Liu authored
[why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by:
Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by:
-
Dmytro Laktyushkin authored
[Why] Secondary DP2 display fails to light up in some instances [How] Clock needs to be on when DPSTREAMCLK*_EN =1. This change moves dtbclk_p enable/disable point to make sure this is the case Reviewed-by:
Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by:
Daniel Miess <daniel.miess@amd.com> Signed-off-by:
-
Eric Yang authored
[Why] Unguarded SMU and CLK IP access cause issue on FPGA [How] Guard them for FPGA environment Reviewed-by:
Sung joon Kim <sungjoon.kim@amd.com> Acked-by:
Eric Yang <eric.yang@amd.com> Tested-by:
-
Fudongwang authored
[Why] 1. To watch dmcub inbox1 ring buffer cmd type without tools 2. dmub_cmd_PLAT_54186_wa 66 bytes [How] Added dmcub cmd type enum: unsigned char for debug use only, also fixed 66 bytes issue by using unsigned int in bit define instead of unsigned char. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Fudongwang <fudong.wang@amd.com> Tested-by:
-
Taimur Hassan authored
[Why] Previous patch to allow DTBCLK disable didn't address boot case. Driver thinks DTBCLK is disabled by default, so we don't send disable message to PMFW. DTBCLK is then enabled at idle desktop on boot, burning power. [How] Set dtbclk_en to true on boot so that disable message is sent during first commit. Reviewed-by:
Taimur Hassan <syed.hassan@amd.com> Tested-by:
-
Charlene Liu authored
[why] BIOS's integration info table not following the original order which is phy instance is ext_displaypath's array index. [how] Move them to follow the original order. Reviewed-by:
Muhammad Ahmed <ahmed.ahmed@amd.com> Acked-by:
-
Hersen Wu authored
[Why] fix reading edp rx crc timeout failure. after bootup, kernel setup psr with dpcd 0x170 = 5. this notify rx psr enable and let rx fw start checking crc for fw internal logic. rx fw may not update crc read count within dpcd 0x246. read count is always 0. this will lead tx crc reading timeout. [How] add debugfs to let test app to disbable rx crc checking for rx internal logic. then test app can read rx crc dpcd 0x246 successfully. expected app sequence is as below: 1. disable eDP PHY and notify eDP rx with dpcd 0x600 = 2. 2. echo 0x1 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr 3. enable eDP PHY and notify eDP rx with dpcd 0x600 = 1 but without dpcd 0x170 = 5. 4. read crc from rx dpcd 0x270, 0x246, etc. 5. echo 0x0 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr. this will let eDP back to normal with psr setup dpcd 0x170 = 5. Reviewed-by:
Wayne Lin <wayne.lin@amd.com> Acked-by:
Hersen Wu <hersenxs.wu@amd.com> Tested-by:
-
Alvin Lee authored
[Why & How] For FPO and SubVP/DRR cases we need to ensure to program OTG_V_TOTAL_MIN/MAX_SEL, otherwise stretching the vblank in FPO / SubVP / DRR cases will not have any effect and we could hit underflow / corruption. Reviewed-by:
-
Aric Cyr authored
[why] There is only a single call to dc_post_update_surfaces_to_stream so there is no need to have two flags to control it. Unifying this to a single flag allows dc_stream_adjust_vmin_vmax to skip actual programming when there is no change required. [how] Remove wm_optimze_required flag and set only optimize_required in its place. Then in dc_stream_adjust_vmin_vmax, check that the stream timing range matches the requested one and skip programming if they are equal. Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
-
Sohaib Nadeem authored
[why] Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware requirement will still be satisfied. Increasing min DCFCLK addresses underflow issues (underflow occurs when phantom pipe is turned on for some Sub-Viewport configs). [how] Increasing DCFCLK by raising the min_dcfclk_mhz Reviewed-by:
Sohaib Nadeem <sohaib.nadeem@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] Otherwise we can send commands too early and they don't execute until the next command is sent. [How] Check the extra status bit when polling for HW powered up. Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] We want acknowledgment of the driver idle disallow from DMCUB before continuing with any further programming. For idle allow we want to minimize the chance of DMCUB actively interacing with other firmware components on the system (eg. PMFW) at the same time. [How] Ensure that DMCUB isn't in the middle of processing other command submissions prior to allowing idle and after disallowing idle by inserting a wait before the allow and by changing the wait type for the idle disallow. Reviewed-by:
-
Charlene Liu authored
Revert commit 885c71ad ("drm/amd/display: initialize all the dpm level's stutter latency") Because it causes some regression Reviewed-by:
-
Yiling Chen authored
[why] The static screen event mask definition is different betwnn DCN31 after and before. [how] Rename DCN30_set_static_screen_control to DCN31. Reviewed-by:
Yiling Chen <yi-ling.chen2@amd.com> Tested-by:
-
Rodrigo Siqueira authored
This commit adds a contribution list for display under the kernel documentation with some first suggestions. It also drops an old TODO list from the display folder. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Acked-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
This commit introduces some explanation about the display team validation. Changes since V1: - Remove unprecise information about the DC process for now, can be added later on. - Jani: Fix bullets Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Rodrigo Siqueira authored
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Rodrigo Siqueira authored
Introduce OPP as part of the kernel documentation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Rodrigo Siqueira authored
This commit adds a kernel-doc entry for the MPC block. Since it enabled the kernel-doc to parse some of the documentation in the mpc.h file, fixing some of the comments was required. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Rodrigo Siqueira authored
This commit introduces basic DPP information and the struct scan for code documentation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Mukul Joshi authored
On GFX 9.4.3, for a given KFD node, fetch the correct drm device from XCP manager when checking for cgroup permissions. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Jay Cornwall authored
This instruction has no functional difference to S_ENDPGM but allows performance counters to track save events correctly. Signed-off-by:
Jay Cornwall <jay.cornwall@amd.com> Reviewed-by:
Laurent Morichetti <laurent.morichetti@amd.com> Acked-by:
-
Philip Yang authored
Partial migration to system memory should use migrate.addr, not prange->start as virtual address to allocate system memory page. Fixes: a546a276 ("drm/amdkfd: Use partial migrations/mapping for GPU/CPU page faults in SVM") Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Xiaogang Chen <Xiaogang.Chen@amd.com> Signed-off-by:
-
Le Ma authored
This patch is to eliminate interrupt warning below: "[drm] Fence fallback timer expired on ring sdma0.0". An early vm pt clearing job is sent to SDMA ahead of interrupt enabled. And re-locating the drm client creation following after drm_dev_register looks like a more proper flow. v2: wrap the drm client creation Fixes: 18192001 ("drm/amdkfd: Export DMABufs from KFD using GEM handles") Signed-off-by:
Le Ma <le.ma@amd.com> Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
The 'stream' pointer is used in dcn10_set_output_transfer_func() before the check if 'stream' is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875) Fixes: ddef02de ("drm/amd/display: add null checks before logging") Cc: Wyatt Wood <wyatt.wood@amd.com> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
-
Rodrigo Siqueira authored
Cc: Jun Lei <Jun.Lei@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
Enable the documentation to extract code documentation from dchubbub.h file. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Rodrigo Siqueira authored
Create the HUBP documentation page and add the doc references to extract the HUBP code documentation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Alex Deucher authored
These have been released now, so add them to the documentation. Acked-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
- 25 Jan, 2024 4 commits
-
-
Victor Skvortsov authored
In runtime, use vram manager for virtualization page retirement. Signed-off-by:
Victor Skvortsov <victor.skvortsov@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Victor Skvortsov authored
In a non-FLR page avoidance scenario, the host driver will provide the bad pages in the pf2vf exchange region. Adding a new host response message to indicate when the pf2vf exchange region has been updated. Signed-off-by:
-
YiPeng Chai authored
Support passing poison consumption ras blocks to SRIOV. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
-
Roman Li authored
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by:
Roman Li <Roman.Li@amd.com> Tested-by:
Mark Broadworth <mark.broadworth@amd.com> Reviewed-by:
-
