- 23 Jan, 2018 4 commits
-
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c:50:34: warning: symbol 'hw_atl_boards' was not declared. Should it be static? Fixes: 4948293f ("net: aquantia: Introduce new AQC devices and capabilities") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fix to return error code -ENOMEM from the aq_ndev_alloc() error handling case instead of 0, as done elsewhere in this function. Fixes: 23ee07ad ("net: aquantia: Cleanup pci functions module") Signed-off-by:
-
Wei Yongjun authored
Fix to return error code -EINVAL instead of 0 when num_vfs above limit_vfs, as done elsewhere in this function. Fixes: 0dc78621 ("nfp: handle SR-IOV already enabled when driver is probing") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Carl Heymann authored
Fix bug that causes _absolute_ rtsym sizes of > 8 bytes (as per symbol table) to result in incorrect space used during a TLV-based debug dump. Detail: The size calculation stage calculates the correct size (size of the rtsym address field == 8), while the dump uses the size in the table to calculate the TLV size to reserve. Symbols with size <= 8 are handled OK due to aligning sizes to 8, but including any absolute symbol with listed size > 8 leads to an ENOSPC error during the dump. Fixes: da762863 ("nfp: fix absolute rtsym handling in debug dump") Signed-off-by:
Carl Heymann <carl.heymann@netronome.com> Reviewed-by:
-
- 22 Jan, 2018 36 commits
-
-
Cong Wang authored
Similarly to tx ring, xdp_rxq_info is only registered when !tfile->detached, so we need to avoid calling xdp_rxq_info_unreg() twice too. The helper tun_cleanup_tx_ring() already checks for this properly, so it is correct to put xdp_rxq_info_unreg() just inside there. Reported-by: syzbot+1c788d7ce0f0888f1d7f@syzkaller.appspotmail.com Fixes: 8565d26b ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net: sched: add extack support for cls offloads I've dropped the tests from the series because test_offloads.py changes will conflict with bpf-next patches. I will send four more patches with tests once bpf-next is merged back, hopefully still making it into 4.16 :) v4: - rebase on top of Alex's changes. --- Quentin says: This series tries to improve user experience when eBPF hardware offload hits error paths at load time. In particular, it introduces netlink extended ack support in the nfp driver. To that aim, transmission of the pointer to the extack object is piped through the `change()` operation of the existing classifiers (patch 1 to 6). Then it is used for TC offload in the nfp driver (patch 8) and in netdevsim (patch 9, selftest in patch 10). Patch 7 adds a helper to handle extack messages in the core when TC offload is disabled on the net device. For completeness extack is propagated for classifiers other than cls_bpf, but it's up to the drivers to make use of it. ==================== Signed-off-by: -
Quentin Monnet authored
Use the recently added extack support for eBPF offload in the driver. Signed-off-by:
Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by:
-
Quentin Monnet authored
Pass a pointer to an extack object to nfp_app_xdp_offload() in order to prepare for extack usage in the nfp driver. Next step will be to forward this extack pointer to nfp_net_bpf_offload(), once this function is able to use it for printing error messages. Signed-off-by:
-
Quentin Monnet authored
Create a wrapper around tc_can_offload() that takes an additional extack pointer argument in order to output an error message if TC offload is disabled on the device. In this way, the error message is handled by the core and can be the same for all drivers. Signed-off-by:
-
Quentin Monnet authored
Add extack support for hardware offload of classifiers. In order to achieve this, a pointer to a struct netlink_ext_ack is added to the struct tc_cls_common_offload that is passed to the callback for setting up the classifier. Function tc_cls_common_offload_init() is updated to support initialization of this new attribute. Signed-off-by:
-
Quentin Monnet authored
Pass the extack pointer obtained in the `->change()` filter operation to cls_bpf_offload() and then to cls_bpf_offload_cmd(). This makes it possible to use this extack pointer in drivers offloading BPF programs in a future patch. Signed-off-by:
-
Quentin Monnet authored
Propagate the extack pointer from the `->change()` classifier operation to the function used for filter replacement in cls_u32. This makes it possible to use netlink extack messages in the future at replacement time for this filter, although it is not used at this point. Signed-off-by:
-
Quentin Monnet authored
Propagate the extack pointer from the `->change()` classifier operation to the function used for filter replacement in cls_matchall. This makes it possible to use netlink extack messages in the future at replacement time for this filter, although it is not used at this point. Signed-off-by:
-
Quentin Monnet authored
Propagate the extack pointer from the `->change()` classifier operation to the function used for filter replacement in cls_flower. This makes it possible to use netlink extack messages in the future at replacement time for this filter, although it is not used at this point. Signed-off-by:
-
Haiyang Zhang authored
Since we no longer localize channel/CPU affiliation within one NUMA node, num_online_cpus() is used as the number of channel cap, instead of the number of processors in a NUMA node. This patch allows a bigger range for tuning the number of channels. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Salil Mehta authored
Spaces were mistakenly used instead of tabs in some of the code related to reset functionality, which caused checkpatch.pl errors. These were missed earlier so fixing them now. Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Arjun Vynipadath authored
T3 devices have different ports on same PCI function, so using dev_port to identify ports. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Return statements in functions returning bool should use true/false instead of 1/0. This issue was detected with the help of Coccinelle. Fixes: 85b35269 ("bridge: Fix build error when IGMP_SNOOPING is not enabled") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Florian Fainelli authored
Broadcom tags inserted by Broadcom switches put a 4 byte header after the MAC SA and before the EtherType, which may look like some sort of 0 length LLC/SNAP packet (tcpdump and wireshark do think that way). With ACS enabled in stmmac the packets were truncated to 8 bytes on reception, whereas clearing this bit allowed normal reception to occur. In order to make that possible, we need to pass a net_device argument to the different core_init() functions and we are dependent on the Broadcom tagger padding packets correctly (which it now does). To be as little invasive as possible, this is only done for gmac1000 when the network device is DSA-enabled (netdev_uses_dsa() returns true). Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== add some features to hns3 driver This patchset adds some features to hns3 driver, include the support for ethtool command -d, -p and support for manager table. [Patch 1/4] adds support for ethtool command -d, its ops is get_regs. driver will send command to command queue, and get regs number and regs value from command queue. [Patch 2/4] adds manager table initialization for hardware. [Patch 3/4] adds support for ethtool command -p. For fiber ports, driver sends command to command queue, and IMP will write SGPIO regs to control leds. [Patch 4/4] adds support for net status led for fiber ports. Net status include port speed, total rx/tx packets and link status. Driver send the status to command queue, and IMP will write SGPIO to control leds. --- Change log: V1 -> V2: 1, fix comments from Andrew Lunn, remove the patch "net: hns3: add ethtool -p support for phy device". ==================== Signed-off-by: -
Jian Shen authored
Check the net status per second, include port speed, total rx/tx packets and link status. Updating the led status for fiber port. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Jian Shen authored
Add led location support for fiber port. The led will keep blinking when locating. Signed-off-by:
-
Fuyun Liang authored
The manager table is empty by default. If it is not initialized, the management pkgs like LLDP will be dropped by hardware. Default entries need to be added to manager table. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
-
Fuyun Liang authored
This patch adds get_regs support for ethtool cmd. Signed-off-by:
-
David Decotigny authored
Expose the number of times the link has been going UP or DOWN, and update the "carrier_changes" counter to be the sum of these two events. While at it, also update the sysfs-class-net documentation to cover: carrier_changes (3.15), carrier_up_count (4.16) and carrier_down_count (4.16) Signed-off-by:
David Decotigny <decot@googlers.com> [Florian: * rebase * add documentation * merge carrier_changes with up/down counters] Signed-off-by:
-
Sabrina Dubroca authored
Commit ccfdec90 ("macsec: Add support for GCM-AES-256 cipher suite") changed a few values in the uapi headers for MACsec. Because of existing userspace implementations, we need to preserve the value of MACSEC_DEFAULT_CIPHER_ID. Not doing that resulted in wpa_supplicant segfaults when a secure channel was created using the default cipher. Thus, swap MACSEC_DEFAULT_CIPHER_{ID,ALT} back to their original values. Changing the maximum length of the MACSEC_SA_ATTR_KEY attribute is unnecessary, as the previous value (MACSEC_MAX_KEY_LEN, which was 128B) is large enough to carry 32-bytes keys. This patch reverts MACSEC_MAX_KEY_LEN to 128B and restores the old length check on MACSEC_SA_ATTR_KEY. Fixes: ccfdec90 ("macsec: Add support for GCM-AES-256 cipher suite") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Huazhong Tan authored
When !CONFIG_REGMAP hns throws compiler warnings since dsaf_read_syscon ignores the return result from regmap_read, which allows val to be uninitialized. Fixes: 86897c96 ("net: hns: add syscon operation for dsaf") Reported-by:
Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Lucas Stach authored
The i.MX8 is a ARMv8 based SoC, that uses the same FEC IP as the earlier, ARMv7 based, i.MX SoCs. Allow the driver to work on ARM64. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Toshiaki Makita authored
The main purpose of this patch is adding a way of checking per-queue stats. It's useful to debug performance problems on multiqueue environment. $ ethtool -S ens10 NIC statistics: rx_queue_0_packets: 2090408 rx_queue_0_bytes: 3164825094 rx_queue_1_packets: 2082531 rx_queue_1_bytes: 3152932314 tx_queue_0_packets: 2770841 tx_queue_0_bytes: 4194955474 tx_queue_1_packets: 3084697 tx_queue_1_bytes: 4670196372 This change converts existing per-cpu stats structure into per-queue one. This should not impact on performance since each queue counter is not updated concurrently by multiple cpus. Performance numbers: - Guest has 2 vcpus and 2 queues - Guest runs netserver - Host runs 100-flow super_netperf Before After Diff UDP_STREAM 18byte 86.22 87.00 +0.90% UDP_STREAM 1472byte 4055.27 4042.18 -0.32% TCP_STREAM 16956.32 16890.63 -0.39% UDP_RR 178667.11 185862.70 +4.03% TCP_RR 128473.04 124985.81 -2.71% Signed-off-by:Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
David S. Miller authored
Marcin Wojtas says: ==================== Armada 7k/8k PP2 ACPI support I quickly resend the series, thanks to Antoine Tenart's remark, who spotted !CONFIG_ACPI compilation issue after introducing the new fwnode_irq_get() routine. Please see the details in the changelog below and the 3/7 commit log. mvpp2 driver can work with the ACPI representation, as exposed on a public branch: https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/commits/marvell-armada-wip It was compiled together with the most recent Tianocore EDK2 revision. Please refer to the firmware build instruction on MacchiatoBin board: http://wiki.macchiatobin.net/tiki-index.php?page=Build+from+source+-+UEFI+EDK+II ACPI representation of PP2 controllers (withouth PHY support) can be viewed in the github: * MacchiatoBin: https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/blob/71ae395da1661374b0f07d1602afb1eee56e9794/Platforms/Marvell/Armada/AcpiTables/Armada80x0McBin/Dsdt.asl#L201 * Armada 7040 DB: https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/blob/71ae395da1661374b0f07d1602afb1eee56e9794/Platforms/Marvell/Armada/AcpiTables/Armada70x0/Dsdt.asl#L131 I will appreciate any comments or remarks. Best regards, Marcin Changelog: v3 -> v4: * 3/7 - add new macro (ACPI_HANDLE_FWNODE) and fix compilation with !CONFIG_ACPI - extend commit log and mention usability of fwnode_irq_get for the child nodes as well v2 -> v3: * 1/7, 2/7 - Add Rafael's Acked-by's * 3/7, 4/7 - New patches * 6/7, 7/7 - Update driver with new helper routines usage - Improve commit log. v1 -> v2: * Remove MDIO patches * Use PP2 ports only with link interrupts * Release second region resources in mvpp2 driver (code moved from mvmdio), as explained in details in 5/5 commit message. ==================== Signed-off-by:
-
Marcin Wojtas authored
This patch introduces an alternative way of obtaining resources - via ACPI tables provided by firmware. Enabling coexistence with the DT support, in addition to the OF_*->device_*/fwnode_* API replacement, required following steps to be taken: * Add mvpp2_acpi_match table * Omit clock configuration and obtain tclk from the property - in ACPI world, the firmware is responsible for clock maintenance. * Disable comphy and syscon handling as they are not available for ACPI. * Modify way of obtaining interrupts - use newly introduced fwnode_irq_get() routine * Until proper MDIO bus and PHY handling with ACPI is established in the kernel, use only link interrupts feature in the driver. For the RGMII port it results in depending on GMAC settings done during firmware stage. * When booting with ACPI MVPP2_QDIST_MULTI_MODE is picked by default, as there is no need to keep any kind of the backward compatibility. Moreover, a memory region used by mvmdio driver is usually placed in the middle of the address space of the PP2 network controller. The MDIO base address is obtained without requesting memory region (by devm_ioremap() call) in mvmdio.c, later overlapping resources are requested by the network driver, which is responsible for avoiding a concurrent access. In case the MDIO memory region is declared in the ACPI, it can already appear as 'in-use' in the OS. Because it is overlapped by second region of the network controller, make sure it is released, before requesting it again. The care is taken by mvpp2 driver to avoid concurrent access to this memory region. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
-
Marcin Wojtas authored
OF functions can be used only for the driver using DT. As a preparation for introducing ACPI support in mvpp2 driver, use struct fwnode_handle in order to obtain properties from the hardware description. This patch replaces of_* function with device_*/fwnode_* where possible in the mvpp2. Signed-off-by:
-
Marcin Wojtas authored
'port_count' field of the mvpp2 structure holds an overall amount of available ports, based on DT nodes status. In order to be prepared to support other HW description, obtain the value by incrementing it upon each successful port initialization. This allowed for simplifying port indexing in the controller's private array, whose size is now not dynamically allocated, but fixed to MVPP2_MAX_PORTS. This patch simplifies creating and filling list of enabled ports and is a part of the preparation for adding ACPI support in the mvpp2 driver. Signed-off-by:
-
Marcin Wojtas authored
Implement a new helper function fwnode_get_next_available_child_node(), which enables obtaining next enabled child fwnode, which works on a similar basis to OF's of_get_next_available_child(). This commit also introduces a macro, thanks to which it is possible to iterate over the available fwnodes, using the new function described above. Signed-off-by:
-
Marcin Wojtas authored
Until now there were two very similar functions allowing to get Linux IRQ number from ACPI handle (acpi_irq_get()) and OF node (of_irq_get()). The first one appeared to be used only as a subroutine of platform_irq_get(), which (in the generic code) limited IRQ obtaining from _CRS method only to nodes associated to kernel's struct platform_device. This patch introduces a new helper routine - fwnode_irq_get(), which allows to get the IRQ number directly from the fwnode to be used as common for OF/ACPI worlds. It is usable not only for the parents fwnodes, but also for the child nodes comprising their own _CRS methods with interrupts description. In order to be able o satisfy compilation with !CONFIG_ACPI and also simplify the new code, introduce a helper macro (ACPI_HANDLE_FWNODE), with which it is possible to reach an ACPI handle directly from its fwnode. Signed-off-by:
-
Marcin Wojtas authored
Until now there were two almost identical functions for obtaining network PHY mode - of_get_phy_mode() and, more generic, device_get_phy_mode(). However it is not uncommon, that the network interface is represented as a child of the actual controller, hence it is not associated directly to any struct device, required by the latter routine. This commit allows for getting the PHY mode for children nodes in the ACPI world by introducing a new function - fwnode_get_phy_mode(). This commit also changes device_get_phy_mode() routine to be its wrapper, in order to prevent unnecessary duplication. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Marcin Wojtas authored
Until now there were two almost identical functions for obtaining MAC address - of_get_mac_address() and, more generic, device_get_mac_address(). However it is not uncommon, that the network interface is represented as a child of the actual controller, hence it is not associated directly to any struct device, required by the latter routine. This commit allows for getting the MAC address for children nodes in the ACPI world by introducing a new function - fwnode_get_mac_address(). This commit also changes device_get_mac_address() routine to be its wrapper, in order to prevent unnecessary duplication. Signed-off-by:
-
Colin Ian King authored
The pointer pfrm is initialized and then later re-assigned the same value and hence the second assignment is redundant and can be removed. Cleans up clang warning: drivers/net/caif/caif_hsi.c:222:6: warning: Value stored to 'pfrm' during its initialization is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ganesh Goudar authored
Add geneve segmentation offload support of T6 cards. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2018-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Less than a handful of changes: * possible memory leak fix in hwsim * speed up hwsim * add hwsim userspace rate control API * code cleanups ==================== A conflict was resolved in mac80211_hwsim.c, mostly of the simple overlapping changes category. One adding a rhashtable and another adding a workqueue. Signed-off-by:
-
