- 01 Dec, 2014 2 commits
-
-
Paolo Bonzini authored
commit c1118b36 upstream. On x86_64, kernel text mappings are mapped read-only with CONFIG_DEBUG_RODATA. In that case, KVM will fail to patch VMCALL instructions to VMMCALL as required on AMD processors. The failure mode is currently a divide-by-zero exception, which obviously is a KVM bug that has to be fixed. However, picking the right instruction between VMCALL and VMMCALL will be faster and will help if you cannot upgrade the hypervisor. Reported-by:
Chris Webb <chris@arachsys.com> Tested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Chris J Arges <chris.j.arges@canonical.com> [ luis: used Chris backport to 3.16 ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Luis Henriques authored
Signed-off-by:
-
- 27 Nov, 2014 38 commits
-
-
Pali Rohár authored
commit a666b6ff upstream. Without this patch, dell-wmi is trying to access elements of dynamically allocated array without checking the array size. This can lead to memory corruption or a kernel panic. This patch adds the missing checks for array size. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Andrey Vagin authored
commit 1195d94e upstream. proc_dointvec_minmax() returns zero if a new value has been set. So we don't need to check all charecters have been handled. Below you can find two examples. In the new value has not been handled properly. $ strace ./a.out open("/proc/sys/kernel/auto_msgmni", O_WRONLY) = 3 write(3, "0\n\0", 3) = 2 close(3) = 0 exit_group(0) $ cat /sys/kernel/debug/tracing/trace $strace ./a.out open("/proc/sys/kernel/auto_msgmni", O_WRONLY) = 3 write(3, "0\n", 2) = 2 close(3) = 0 $ cat /sys/kernel/debug/tracing/trace a.out-697 [000] .... 3280.998235: unregister_ipcns_notifier <-proc_ipcauto_dointvec_minmax Fixes: 9eefe520 ("ipc: do not use a negative value to re-enable msgmni automatic recomputin") Signed-off-by:
Andrey Vagin <avagin@openvz.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Joe Perches <joe@perches.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Roger Quadros authored
commit a8ead0ec upstream. The 5th NAND partition should be named "NAND.u-boot-spl-os" instead of "NAND.u-boot-spl". This is to be consistent with other TI boards as well as u-boot. Fixes: 91994fac ("ARM: dts: am335x-evm: NAND: update MTD partition table") Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Andy Lutomirski authored
commit 81f49a8f upstream. is_compat_task() is the wrong check for audit arch; the check should be is_ia32_task(): x32 syscalls should be AUDIT_ARCH_X86_64, not AUDIT_ARCH_I386. CONFIG_AUDITSYSCALL is currently incompatible with x32, so this has no visible effect. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/a0138ed8c709882aec06e4acc30bfa9b623b8717.1409954077.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Pranith Kumar authored
commit 2aa792e6 upstream. The rcu_gp_kthread_wake() function checks for three conditions before waking up grace period kthreads: * Is the thread we are trying to wake up the current thread? * Are the gp_flags zero? (all threads wait on non-zero gp_flags condition) * Is there no thread created for this flavour, hence nothing to wake up? If any one of these condition is true, we do not call wake_up(). It was found that there are quite a few avoidable wake ups both during idle time and under stress induced by rcutorture. Idle: Total:66000, unnecessary:66000, case1:61827, case2:66000, case3:0 Total:68000, unnecessary:68000, case1:63696, case2:68000, case3:0 rcutorture: Total:254000, unnecessary:254000, case1:199913, case2:254000, case3:0 Total:256000, unnecessary:256000, case1:201784, case2:256000, case3:0 Here case{1-3} are the cases listed above. We can avoid these wake ups by using rcu_gp_kthread_wake() to conditionally wake up the grace period kthreads. There is a comment about an implied barrier supplied by the wake_up() logic. This barrier is necessary for the awakened thread to see the updated ->gp_flags. This flag is always being updated with the root node lock held. Also, the awakened thread tries to acquire the root node lock before reading ->gp_flags because of which there is proper ordering. Hence this commit tries to avoid calling wake_up() whenever we can by using rcu_gp_kthread_wake() function. Signed-off-by:
Pranith Kumar <bobby.prani@gmail.com> CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Pablo Neira authored
commit e10038a8 upstream. This structure is not exposed to userspace, so fix this by defining struct sk_filter; so we skip the casting in kernelspace. This is safe since userspace has no way to lurk with that internal pointer. Fixes: e6f30c73 ("netfilter: x_tables: add xt_bpf match") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Devesh Sharma authored
commit 8b0f93d9 upstream. During create-ah from userspace, uverbs is sending garbage data in attr.dmac and attr.vlan_id. This patch sets attr.dmac and attr.vlan_id to zero. Fixes: dd5f03be ("IB/core: Ethernet L2 attributes in verbs/cm structures") Signed-off-by:
Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 96a2adbc upstream. kernel/time/jiffies.c provides a default clocksource_default_clock() definition explicitly marked "weak". arch/s390 provides its own definition intended to override the default, but the "weak" attribute on the declaration applied to the s390 definition as well, so the linker chose one based on link order (see 10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the clocksource_default_clock() declaration so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: f1b82746 ("clocksource: Cleanup clocksource selection") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
John Stultz <john.stultz@linaro.org> Acked-by:
Ingo Molnar <mingo@kernel.org> CC: Daniel Lezcano <daniel.lezcano@linaro.org> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 107bcc6d upstream. kernel/debug/debug_core.c provides a default kgdb_arch_pc() definition explicitly marked "weak". Several architectures provide their own definitions intended to override the default, but the "weak" attribute on the declaration applied to the arch definitions as well, so the linker chose one based on link order (see 10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the declaration so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: 688b744d ("kgdb: fix signedness mixmatches, add statics, add declaration to header") Tested-by: Vineet Gupta <vgupta@synopsys.com> # for ARC build Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 5ab03ac5 upstream. For the following functions: elfcorehdr_alloc() elfcorehdr_free() elfcorehdr_read() elfcorehdr_read_notes() remap_oldmem_pfn_range() fs/proc/vmcore.c provides default definitions explicitly marked "weak". arch/s390 provides its own definitions intended to override the default ones, but the "weak" attribute on the declarations applied to the s390 definitions as well, so the linker chose one based on link order (see 10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the declarations so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: be8a8d06 ("vmcore: introduce ELF header in new memory feature") Fixes: 9cb21813 ("vmcore: introduce remap_oldmem_pfn_range()") Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> CC: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Bjorn Helgaas authored
commit e0a8400c upstream. drivers/base/memory.c provides a default memory_block_size_bytes() definition explicitly marked "weak". Several architectures provide their own definitions intended to override the default, but the "weak" attribute on the declaration applied to the arch definitions as well, so the linker chose one based on link order (see 10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the declaration so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: 41f10726 ("drivers: base: Add prototype declaration to the header file") Signed-off-by:
-
Roger Quadros authored
commit 73b3a665 upstream. For PIN_OUTPUT_PULLUP and PIN_OUTPUT_PULLDOWN we must not set the PULL_DIS bit which disables the PULLs. PULL_ENA is a 0 and using it in an OR operation is a NOP, so don't use it in the PIN_OUTPUT_PULLUP/DOWN macros. Fixes: 23d9cec0 ("pinctrl: dra: dt-bindings: Fix pull enable/disable") Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Junjie Mao authored
commit 805dbe17 upstream. The driver is not released when ieee80211_register_hw fails in mac80211_hwsim_create_radio, leading to the access to the unregistered (and possibly freed) device in platform_driver_unregister: [ 0.447547] mac80211_hwsim: ieee80211_register_hw failed (-2) [ 0.448292] ------------[ cut here ]------------ [ 0.448854] WARNING: CPU: 0 PID: 1 at ../include/linux/kref.h:47 kobject_get+0x33/0x50() [ 0.449839] CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00001-gdd46990-dirty #2 [ 0.450813] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.451512] 00000000 00000000 78025e38 7967c6c6 78025e68 7905e09b 7988b480 00000000 [ 0.452579] 00000001 79887d62 0000002f 79170bb3 79170bb3 78397008 79ac9d74 00000001 [ 0.453614] 78025e78 7905e15d 00000009 00000000 78025e84 79170bb3 78397000 78025e8c [ 0.454632] Call Trace: [ 0.454921] [<7967c6c6>] dump_stack+0x16/0x18 [ 0.455453] [<7905e09b>] warn_slowpath_common+0x6b/0x90 [ 0.456067] [<79170bb3>] ? kobject_get+0x33/0x50 [ 0.456612] [<79170bb3>] ? kobject_get+0x33/0x50 [ 0.457155] [<7905e15d>] warn_slowpath_null+0x1d/0x20 [ 0.457748] [<79170bb3>] kobject_get+0x33/0x50 [ 0.458274] [<7925824f>] get_device+0xf/0x20 [ 0.458779] [<7925b5cd>] driver_detach+0x3d/0xa0 [ 0.459331] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.459927] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.460660] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.461248] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.461824] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.462507] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.463161] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.463758] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.464393] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.465001] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.465569] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.466345] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.466972] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.467546] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.468072] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.468658] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.469303] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.469829] ---[ end trace ad8ac403ff8aef5c ]--- [ 0.470509] ------------[ cut here ]------------ [ 0.471047] WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3161 __lock_acquire.isra.22+0x7aa/0xb00() [ 0.472163] DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS) [ 0.472774] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2 [ 0.473815] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.474492] 78025de0 78025de0 78025da0 7967c6c6 78025dd0 7905e09b 79888931 78025dfc [ 0.475515] 00000001 79888a93 00000c59 7907f33a 7907f33a 78028000 fffe9d09 00000000 [ 0.476519] 78025de8 7905e10e 00000009 78025de0 79888931 78025dfc 78025e24 7907f33a [ 0.477523] Call Trace: [ 0.477821] [<7967c6c6>] dump_stack+0x16/0x18 [ 0.478352] [<7905e09b>] warn_slowpath_common+0x6b/0x90 [ 0.478976] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00 [ 0.479658] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00 [ 0.480417] [<7905e10e>] warn_slowpath_fmt+0x2e/0x30 [ 0.480479] [<7907f33a>] __lock_acquire.isra.22+0x7aa/0xb00 [ 0.480479] [<79078aa5>] ? sched_clock_cpu+0xb5/0xf0 [ 0.480479] [<7907fd06>] lock_acquire+0x56/0x70 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<79682d11>] mutex_lock_nested+0x61/0x2a0 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<7925b5e8>] driver_detach+0x58/0xa0 [ 0.480479] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.480479] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.480479] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.480479] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.480479] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.480479] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.480479] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.480479] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.480479] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.480479] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.480479] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.480479] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.480479] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.480479] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.480479] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.480479] ---[ end trace ad8ac403ff8aef5d ]--- [ 0.495478] BUG: unable to handle kernel paging request at 00200200 [ 0.496257] IP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 [ 0.496923] *pde = 00000000 [ 0.497290] Oops: 0002 [#1] [ 0.497653] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2 [ 0.498659] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.499321] task: 78028000 ti: 78024000 task.ti: 78024000 [ 0.499955] EIP: 0060:[<79682de5>] EFLAGS: 00010097 CPU: 0 [ 0.500620] EIP is at mutex_lock_nested+0x135/0x2a0 [ 0.501145] EAX: 00200200 EBX: 78397434 ECX: 78397460 EDX: 78025e70 [ 0.501816] ESI: 00000246 EDI: 78028000 EBP: 78025e8c ESP: 78025e54 [ 0.502497] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.503076] CR0: 8005003b CR2: 00200200 CR3: 01b9d000 CR4: 00000690 [ 0.503773] Stack: [ 0.503998] 00000000 00000001 00000000 7925b5e8 78397460 7925b5e8 78397474 78397460 [ 0.504944] 00200200 11111111 78025e70 78397000 79ac9d74 00000001 78025ea0 7925b5e8 [ 0.505451] 79ac9d74 fffffffe 00000001 78025ebc 7925a3ff 7a251398 78025ec8 7925bf80 [ 0.505451] Call Trace: [ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.505451] [<7925b5e8>] driver_detach+0x58/0xa0 [ 0.505451] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.505451] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.505451] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.505451] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.505451] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.505451] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.505451] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.505451] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.505451] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.505451] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.505451] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.505451] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.505451] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.505451] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.505451] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.505451] Code: 89 d8 e8 cf 9b 9f ff 8b 4f 04 8d 55 e4 89 d8 e8 72 9d 9f ff 8d 43 2c 89 c1 89 45 d8 8b 43 30 8d 55 e4 89 53 30 89 4d e4 89 45 e8 <89> 10 8b 55 dc 8b 45 e0 89 7d ec e8 db af 9f ff eb 11 90 31 c0 [ 0.505451] EIP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 SS:ESP 0068:78025e54 [ 0.505451] CR2: 0000000000200200 [ 0.505451] ---[ end trace ad8ac403ff8aef5e ]--- [ 0.505451] Kernel panic - not syncing: Fatal exception Fixes: 9ea92774 ("mac80211_hwsim: Register and bind to driver") Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Junjie Mao <eternal.n08@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Richard Guy Briggs authored
commit 9ef91514 upstream. When an AUDIT_GET_FEATURE message is sent from userspace to the kernel, it should reply with a message tagged as an AUDIT_GET_FEATURE type with a struct audit_feature. The current reply is a message tagged as an AUDIT_GET type with a struct audit_feature. This appears to have been a cut-and-paste-eo in commit b0fed402. Reported-by:
Steve Grubb <sgrubb@redhat.com> Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
Cristian Stoica authored
commit 307fd543 upstream. Replace equivalent (and partially incorrect) scatter-gather functions with ones from crypto-API. The replacement is motivated by page-faults in sg_copy_part triggered by successive calls to crypto_hash_update. The following fault appears after calling crypto_ahash_update twice, first with 13 and then with 285 bytes: Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xf9bf9a8c Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 CoreNet Generic Modules linked in: tcrypt(+) caamhash caam_jr caam tls CPU: 6 PID: 1497 Comm: cryptomgr_test Not tainted 3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2 #75 task: e9308530 ti: e700e000 task.ti: e700e000 NIP: f9bf9a8c LR: f9bfcf28 CTR: c0019ea0 REGS: e700fb80 TRAP: 0300 Not tainted (3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2) MSR: 00029002 <CE,EE,ME> CR: 44f92024 XER: 20000000 DEAR: 00000008, ESR: 00000000 GPR00: f9bfcf28 e700fc30 e9308530 e70b1e55 00000000 ffffffdd e70b1e54 0bebf888 GPR08: 902c7ef5 c0e771e2 00000002 00000888 c0019ea0 00000000 00000000 c07a4154 GPR16: c08d0000 e91a8f9c 00000001 e98fb400 00000100 e9c83028 e70b1e08 e70b1d48 GPR24: e992ce10 e70b1dc8 f9bfe4f4 e70b1e55 ffffffdd e70b1ce0 00000000 00000000 NIP [f9bf9a8c] sg_copy+0x1c/0x100 [caamhash] LR [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash] Call Trace: [e700fc30] [f9bf9c50] sg_copy_part+0xe0/0x160 [caamhash] (unreliable) [e700fc50] [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash] [e700fcb0] [f954e19c] crypto_tls_genicv+0x13c/0x300 [tls] [e700fd10] [f954e65c] crypto_tls_encrypt+0x5c/0x260 [tls] [e700fd40] [c02250ec] __test_aead.constprop.9+0x2bc/0xb70 [e700fe40] [c02259f0] alg_test_aead+0x50/0xc0 [e700fe60] [c02241e4] alg_test+0x114/0x2e0 [e700fee0] [c022276c] cryptomgr_test+0x4c/0x60 [e700fef0] [c004f658] kthread+0x98/0xa0 [e700ff40] [c000fd04] ret_from_kernel_thread+0x5c/0x64 Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Pawel Moll authored
commit b3f20785 upstream. When running a 32-bit userspace on a 64-bit kernel (eg. i386 application on x86_64 kernel or 32-bit arm userspace on arm64 kernel) some of the perf ioctls must be treated with special care, as they have a pointer size encoded in the command. For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded as 0x80042407, but 64-bit kernel will expect 0x80082407. In result the ioctl will fail returning -ENOTTY. This patch solves the problem by adding code fixing up the size as compat_ioctl file operation. Reported-by:
Drew Richardson <drew.richardson@arm.com> Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1402671812-9078-1-git-send-email-pawel.moll@arm.comSigned-off-by:
-
Derek Browne authored
commit 43e968ce upstream. This patch is to enable SDIO host controller for Intel Quark X1000. Signed-off-by:
Derek Browne <Derek.Browne@intel.com> Signed-off-by:
Alvin (Weike) Chen <alvin.chen@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Frank Schaefer authored
commit 627530c3 upstream. When a new video frame is started, the driver takes the next video buffer from the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf for further processing. On streaming stop we currently only give back the pending buffers from the list but not the ones which are currently processed. This causes the following warning from the vb2 core since kernel 3.15: ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]() [...] Call Trace: [<c0769c46>] dump_stack+0x48/0x69 [<c0245b69>] warn_slowpath_common+0x79/0x90 [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<c0245bfd>] warn_slowpath_null+0x1d/0x20 [<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core] [<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core] [<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core] [<f8e45895>] v4l_streamoff+0x15/0x20 [videodev] [<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<c039d0e7>] ? fsnotify+0x1e7/0x2b0 [<f8e49012>] video_ioctl2+0x12/0x20 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev] [<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev] [<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0 [<c0368eec>] ? vfs_write+0x13c/0x1c0 [<c0369a8f>] ? vfs_writev+0x2f/0x50 [<c0379028>] SyS_ioctl+0x58/0x80 [<c076fff3>] sysenter_do_call+0x12/0x12 ---[ end trace 5545f934409f13f4 ]--- ... Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled this long standing issue and who has investigated it further. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Stephan Mueller authored
commit 725c7f61 upstream. The Yoga 3 does not contain any physical rfkill switch. Therefore disable the rfkill switch identically to the Yoga 2 approach. Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Nadav Amit authored
commit a2b9e6c1 upstream. Commit fc3a9157 ("KVM: X86: Don't report L2 emulation failures to user-space") disabled the reporting of L2 (nested guest) emulation failures to userspace due to race-condition between a vmexit and the instruction emulator. The same rational applies also to userspace applications that are permitted by the guest OS to access MMIO area or perform PIO. This patch extends the current behavior - of injecting a #UD instead of reporting it to userspace - also for guest userspace code. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
Alex Deucher authored
commit 83d04c39 upstream. Fixes kfree of the sadb buffer when it's NULL. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Andreas Larsson authored
commit 1a17fdc4 upstream. Atomicity between xchg and cmpxchg cannot be guaranteed when xchg is implemented with a swap and cmpxchg is implemented with locks. Without this, e.g. mcs_spin_lock and mcs_spin_unlock are broken. Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
-
David S. Miller authored
commit ab5c7809 upstream. Otherwise rcu_irq_{enter,exit}() do not happen and we get dumps like: ==================== [ 188.275021] =============================== [ 188.309351] [ INFO: suspicious RCU usage. ] [ 188.343737] 3.18.0-rc3-00068-g20f3963d-dirty #54 Not tainted [ 188.394786] ------------------------------- [ 188.429170] include/linux/rcupdate.h:883 rcu_read_lock() used illegally while idle! [ 188.505235] other info that might help us debug this: [ 188.554230] RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 [ 188.637587] RCU used illegally from extended quiescent state! [ 188.690684] 3 locks held by swapper/7/0: [ 188.721932] #0: (&x->wait#11){......}, at: [<0000000000495de8>] complete+0x8/0x60 [ 188.797994] #1: (&p->pi_lock){-.-.-.}, at: [<000000000048510c>] try_to_wake_up+0xc/0x400 [ 188.881343] #2: (rcu_read_lock){......}, at: [<000000000048a910>] select_task_rq_fair+0x90/0xb40 [ 188.973043]stack backtrace: [ 188.993879] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 3.18.0-rc3-00068-g20f3963d-dirty #54 [ 189.076187] Call Trace: [ 189.089719] [0000000000499360] lockdep_rcu_suspicious+0xe0/0x100 [ 189.147035] [000000000048a99c] select_task_rq_fair+0x11c/0xb40 [ 189.202253] [00000000004852d8] try_to_wake_up+0x1d8/0x400 [ 189.252258] [000000000048554c] default_wake_function+0xc/0x20 [ 189.306435] [0000000000495554] __wake_up_common+0x34/0x80 [ 189.356448] [00000000004955b4] __wake_up_locked+0x14/0x40 [ 189.406456] [0000000000495e08] complete+0x28/0x60 [ 189.448142] [0000000000636e28] blk_end_sync_rq+0x8/0x20 [ 189.496057] [0000000000639898] __blk_mq_end_request+0x18/0x60 [ 189.550249] [00000000006ee014] scsi_end_request+0x94/0x180 [ 189.601286] [00000000006ee334] scsi_io_completion+0x1d4/0x600 [ 189.655463] [00000000006e51c4] scsi_finish_command+0xc4/0xe0 [ 189.708598] [00000000006ed958] scsi_softirq_done+0x118/0x140 [ 189.761735] [00000000006398ec] __blk_mq_complete_request_remote+0xc/0x20 [ 189.827383] [00000000004c75d0] generic_smp_call_function_single_interrupt+0x150/0x1c0 [ 189.906581] [000000000043e514] smp_call_function_single_client+0x14/0x40 ==================== Based almost entirely upon a patch by Paul E. McKenney. Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
-
David S. Miller authored
commit 7da89a2a upstream. Meelis Roos reports crashes during bootup on a V480 that look like this: ==================== [ 61.300577] PCI: Scanning PBM /pci@9,600000 [ 61.304867] schizo f009b070: PCI host bridge to bus 0003:00 [ 61.310385] pci_bus 0003:00: root bus resource [io 0x7ffe9000000-0x7ffe9ffffff] (bus address [0x0000-0xffffff]) [ 61.320515] pci_bus 0003:00: root bus resource [mem 0x7fb00000000-0x7fbffffffff] (bus address [0x00000000-0xffffffff]) [ 61.331173] pci_bus 0003:00: root bus resource [bus 00] [ 61.385344] Unable to handle kernel NULL pointer dereference [ 61.390970] tsk->{mm,active_mm}->context = 0000000000000000 [ 61.396515] tsk->{mm,active_mm}->pgd = fff000b000002000 [ 61.401716] \|/ ____ \|/ [ 61.401716] "@'/ .. \`@" [ 61.401716] /_| \__/ |_\ [ 61.401716] \__U_/ [ 61.416362] swapper/0(0): Oops [#1] [ 61.419837] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc1-00422-g2cc91884-dirty #24 [ 61.427975] task: fff000b0fd8e9c40 ti: fff000b0fd928000 task.ti: fff000b0fd928000 [ 61.435426] TSTATE: 0000004480e01602 TPC: 00000000004455e4 TNPC: 00000000004455e8 Y: 00000000 Not tainted [ 61.445230] TPC: <schizo_pcierr_intr+0x104/0x560> [ 61.449897] g0: 0000000000000000 g1: 0000000000000000 g2: 0000000000a10f78 g3: 000000000000000a [ 61.458563] g4: fff000b0fd8e9c40 g5: fff000b0fdd82000 g6: fff000b0fd928000 g7: 000000000000000a [ 61.467229] o0: 000000000000003d o1: 0000000000000000 o2: 0000000000000006 o3: fff000b0ffa5fc7e [ 61.475894] o4: 0000000000060000 o5: c000000000000000 sp: fff000b0ffa5f3c1 ret_pc: 00000000004455cc [ 61.484909] RPC: <schizo_pcierr_intr+0xec/0x560> [ 61.489500] l0: fff000b0fd8e9c40 l1: 0000000000a20800 l2: 0000000000000000 l3: 000000000119a430 [ 61.498164] l4: 0000000001742400 l5: 00000000011cfbe0 l6: 00000000011319c0 l7: fff000b0fd8ea348 [ 61.506830] i0: 0000000000000000 i1: fff000b0fdb34000 i2: 0000000320000000 i3: 0000000000000000 [ 61.515497] i4: 00060002010b003f i5: 0000040004e02000 i6: fff000b0ffa5f481 i7: 00000000004a9920 [ 61.524175] I7: <handle_irq_event_percpu+0x40/0x140> [ 61.529099] Call Trace: [ 61.531531] [00000000004a9920] handle_irq_event_percpu+0x40/0x140 [ 61.537681] [00000000004a9a58] handle_irq_event+0x38/0x80 [ 61.543145] [00000000004ac77c] handle_fasteoi_irq+0xbc/0x200 [ 61.548860] [00000000004a9084] generic_handle_irq+0x24/0x40 [ 61.554500] [000000000042be0c] handler_irq+0xac/0x100 ==================== The problem is that pbm->pci_bus->self is NULL. This code is trying to go through the standard PCI config space interfaces to read the PCI controller's PCI_STATUS register. This doesn't work, because we more often than not do not enumerate the PCI controller as a bonafide PCI device during the OF device node scan. Therefore bus->self remains NULL. Existing common code for PSYCHO and PSYCHO-like PCI controllers handles this properly, by doing the config space access directly. Do the same here, pbm->pci_ops->{read,write}(). Reported-by:
-
Dwight Engen authored
commit 85b0c6e6 upstream. The VD_OP_GET_VTOC operation will succeed only if the vdisk backend has a VTOC label, otherwise it will fail. In particular, it will return error 48 (ENOTSUP) if the disk has an EFI label. VTOC disk labels are already handled by directly reading the disk in block/partitions/sun.c (enabled by CONFIG_SUN_PARTITION which defaults to y on SPARC). Since port->label is unused in the driver, remove the call and the field. Signed-off-by:
Dwight Engen <dwight.engen@oracle.com> Signed-off-by:
-
Dwight Engen authored
commit d0aedcd4 upstream. vio_dring_avail() will allow use of every dring entry, but when the last entry is allocated then dr->prod == dr->cons which is indistinguishable from the ring empty condition. This causes the next allocation to reuse an entry. When this happens in sunvdc, the server side vds driver begins nack'ing the messages and ends up resetting the ldc channel. This problem does not effect sunvnet since it checks for < 2. The fix here is to just never allocate the very last dring slot so that full and empty are not the same condition. The request start path was changed to check for the ring being full a bit earlier, and to stop the blk_queue if there is no space left. The blk_queue will be restarted once the ring is only half full again. The number of ring entries was increased to 512 which matches the sunvnet and Solaris vdc drivers, and greatly reduces the frequency of hitting the ring full condition and the associated blk_queue stop/starting. The checks in sunvent were adjusted to account for vio_dring_avail() returning 1 less. Orabug: 19441666 OraBZ: 14983 Signed-off-by:
-
Dwight Engen authored
commit 5eed69ff upstream. ldc_map_sg() could fail its check that the number of pages referred to by the sg scatterlist was <= the number of cookies. This fixes the issue by doing a similar thing to the xen-blkfront driver, ensuring that the scatterlist will only ever contain a segment count <= port->ring_cookies, and each segment will be page aligned, and <= page size. This ensures that the scatterlist is always mappable. Orabug: 19347817 OraBZ: 15945 Signed-off-by:
-
Allen Pais authored
commit de5b73f0 upstream. The LDom diskserver doesn't return reliable geometry data. In addition, the types for all fields in the vio_disk_geom are u16, which were being truncated in the cast into the u8's of the Linux struct hd_geometry. Modify vdc_getgeo() to compute the geometry from the disk's capacity in a manner consistent with xen-blkfront::blkif_getgeo(). Signed-off-by:
-
Allen Pais authored
commit 9bce2182 upstream. Interpret the media type from v1.1 protocol to support CDROM/DVD. For v1.0 protocol, a disk's size continues to be calculated from the geometry returned by the vdisk server. The geometry returned by the server can be less than the actual number of sectors available in the backing image/device due to the rounding in the division used to compute the geometry in the vdisk server. In v1.1 protocol a disk's actual size in sectors is returned during the handshake. Use this size when v1.1 protocol is negotiated. Since this size will always be larger than the former geometry computed size, disks created under v1.0 will be forwards compatible to v1.1, but not vice versa. Signed-off-by:
-
Enric Balletbo i Serra authored
commit ccf899a2 upstream. With commit be9dad1f ("net: phy: suspend phydev when going to HALTED"), the PHY device will be put in a low-power mode using BMCR_PDOWN if the the interface is set down. The smsc911x driver does a software_reset opening the device driver (ndo_open). In such case, the PHY must be powered-up before access to any register and before calling the software_reset function. Otherwise, as the PHY is powered down the software reset fails and the interface can not be enabled again. This patch fixes this scenario that is easy to reproduce setting down the network interface and setting up again. $ ifconfig eth0 down $ ifconfig eth0 up ifconfig: SIOCSIFFLAGS: Input/output error Signed-off-by:
Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by:
-
Hiroaki SHIMODA authored
commit 6251edd9 upstream. Even if netlink_kernel_cfg::unbind is implemented the unbind() method is not called, because cfg->unbind is omitted in __netlink_kernel_create(). And fix wrong argument of test_bit() and off by one problem. At this point, no unbind() method is implemented, so there is no real issue. Fixes: 4f520900 ("netlink: have netlink per-protocol bind function return an error code.") Signed-off-by:
Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Cc: Richard Guy Briggs <rgb@redhat.com> Acked-by:
-
Eric Dumazet authored
commit 5337b5b7 upstream. Use IS_ENABLED(CONFIG_IPV6), to enable this code if IPv6 is a module. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: c8e6ad08 ("ipv6: honor IPV6_PKTINFO with v4 mapped addresses on sendmsg") Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Daniel Borkmann authored
commit 4184b2a7 upstream. A very minimal and simple user space application allocating an SCTP socket, setting SCTP_AUTH_KEY setsockopt(2) on it and then closing the socket again will leak the memory containing the authentication key from user space: unreferenced object 0xffff8800837047c0 (size 16): comm "a.out", pid 2789, jiffies 4296954322 (age 192.258s) hex dump (first 16 bytes): 01 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff816d7e8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811c88d8>] __kmalloc+0xe8/0x270 [<ffffffffa0870c23>] sctp_auth_create_key+0x23/0x50 [sctp] [<ffffffffa08718b1>] sctp_auth_set_key+0xa1/0x140 [sctp] [<ffffffffa086b383>] sctp_setsockopt+0xd03/0x1180 [sctp] [<ffffffff815bfd94>] sock_common_setsockopt+0x14/0x20 [<ffffffff815beb61>] SyS_setsockopt+0x71/0xd0 [<ffffffff816e58a9>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff This is bad because of two things, we can bring down a machine from user space when auth_enable=1, but also we would leave security sensitive keying material in memory without clearing it after use. The issue is that sctp_auth_create_key() already sets the refcount to 1, but after allocation sctp_auth_set_key() does an additional refcount on it, and thus leaving it around when we free the socket. Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Daniel Borkmann authored
commit e40607cb upstream. An SCTP server doing ASCONF will panic on malformed INIT ping-of-death in the form of: ------------ INIT[PARAM: SET_PRIMARY_IP] ------------> While the INIT chunk parameter verification dissects through many things in order to detect malformed input, it misses to actually check parameters inside of parameters. E.g. RFC5061, section 4.2.4 proposes a 'set primary IP address' parameter in ASCONF, which has as a subparameter an address parameter. So an attacker may send a parameter type other than SCTP_PARAM_IPV4_ADDRESS or SCTP_PARAM_IPV6_ADDRESS, param_type2af() will subsequently return 0 and thus sctp_get_af_specific() returns NULL, too, which we then happily dereference unconditionally through af->from_addr_param(). The trace for the log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 IP: [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp] PGD 0 Oops: 0000 [#1] SMP [...] Pid: 0, comm: swapper Not tainted 2.6.32-504.el6.x86_64 #1 Bochs Bochs RIP: 0010:[<ffffffffa01e9c62>] [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp] [...] Call Trace: <IRQ> [<ffffffffa01f2add>] ? sctp_bind_addr_copy+0x5d/0xe0 [sctp] [<ffffffffa01e1fcb>] sctp_sf_do_5_1B_init+0x21b/0x340 [sctp] [<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp] [<ffffffffa01e5c09>] ? sctp_endpoint_lookup_assoc+0xc9/0xf0 [sctp] [<ffffffffa01e61f6>] sctp_endpoint_bh_rcv+0x116/0x230 [sctp] [<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp] [<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp] [<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter] [<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [...] A minimal way to address this is to check for NULL as we do on all other such occasions where we know sctp_get_af_specific() could possibly return with NULL. Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT") Signed-off-by:
-
Marcelo Leitner authored
commit 19ca9fc1 upstream. Currently, we only match against local port number in order to reuse socket. But if this new vxlan wants an IPv6 socket and a IPv4 one bound to that port, vxlan will reuse an IPv4 socket as IPv6 and a panic will follow. The following steps reproduce it: # ip link add vxlan6 type vxlan id 42 group 229.10.10.10 \ srcport 5000 6000 dev eth0 # ip link add vxlan7 type vxlan id 43 group ff0e::110 \ srcport 5000 6000 dev eth0 # ip link set vxlan6 up # ip link set vxlan7 up <panic> [ 4.187481] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 ... [ 4.188076] Call Trace: [ 4.188085] [<ffffffff81667c4a>] ? ipv6_sock_mc_join+0x3a/0x630 [ 4.188098] [<ffffffffa05a6ad6>] vxlan_igmp_join+0x66/0xd0 [vxlan] [ 4.188113] [<ffffffff810a3430>] process_one_work+0x220/0x710 [ 4.188125] [<ffffffff810a33c4>] ? process_one_work+0x1b4/0x710 [ 4.188138] [<ffffffff810a3a3b>] worker_thread+0x11b/0x3a0 [ 4.188149] [<ffffffff810a3920>] ? process_one_work+0x710/0x710 So address family must also match in order to reuse a socket. Reported-by:
Jean-Tsung Hsiao <jhsiao@redhat.com> Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
-
Karl Beldan authored
commit 2c2a9cbd upstream. ATM, txq_reclaim will dequeue and free an skb for each tx desc released by the hw that has TX_LAST_DESC set. However, in case of TSO, each hw desc embedding the last part of a segment has TX_LAST_DESC set, losing the one-to-one 'last skb frag'/'TX_LAST_DESC set' correspondance, which causes data corruption. Fix this by checking TX_ENABLE_INTERRUPT instead of TX_LAST_DESC, and warn when trying to dequeue from an empty txq (which can be symptomatic of releasing skbs prematurely). Fixes: 3ae8f4e0 ('net: mv643xx_eth: Implement software TSO') Reported-by:
Slawomir Gajzner <slawomir.gajzner@gmail.com> Reported-by:
Julien D'Ascenzio <jdascenzio@yahoo.fr> Signed-off-by:
Karl Beldan <karl.beldan@rivierawaves.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
Steffen Klassert authored
commit f03eb128 upstream. Otherwise it gets overwritten by register_netdev(). Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
commit ebe084aa upstream. ipip6_tunnel_init() sets the dev->iflink via a call to ipip6_tunnel_bind_dev(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the ndo_init function. Then ipip6_tunnel_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
