The driver does not support PTP on these older chips and it is assuming
that firmware on these older chips will not return the
PORT_MAC_PTP_QCFG_RESP_FLAGS_HWRM_ACCESS flag in __bnxt_hwrm_ptp_qcfg(),
causing the function to abort quietly.

But newer firmware now sets this flag and so __bnxt_hwrm_ptp_qcfg()
will proceed further.  Eventually it will fail in bnxt_ptp_init() ->
bnxt_map_ptp_regs() because there is no code to support the older chips.
The driver will then complain:

"PTP initialization failed.\n"

Fix it so that we abort quietly earlier without going through the
unnecessary steps and alarming the user with the warning log.

Fixes: ae5c42f0 ("bnxt_en: Get PTP hardware capability from firmware")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The flower_stats_timer can schedule flower_stats_work and
flower_stats_work can also arm the flower_stats_timer. The
process is shown below:

----------- timer schedules work ------------
ch_flower_stats_cb() //timer handler
  schedule_work(&adap->flower_stats_work);

----------- work arms timer ------------
ch_flower_stats_handler() //workqueue callback function
  mod_timer(&adap->flower_stats_timer, ...);

When the cxgb4 device is detaching, the timer and workqueue
could still be rearmed. The process is shown below:

  (cleanup routine)           | (timer and workqueue routine)
remove_one()                  |
  free_some_resources()       | ch_flower_stats_cb() //timer
    cxgb4_cleanup_tc_flower() |   schedule_work()
      del_timer_sync()        |
                              | ch_flower_stats_handler() //workqueue
                              |   mod_timer()
      cancel_work_sync()      |
  kfree(adapter) //FREE       | ch_flower_stats_cb() //timer
                              |   adap->flower_stats_work //USE

This patch changes del_timer_sync() to timer_shutdown_sync(),
which could prevent rearming of the timer from the workqueue.

Fixes: e0f911c8 ("cxgb4: fetch stats for offloaded tc flower flows")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20230415081227.7463-1-duoming@zju.edu.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit e523af4e ("net/ice: Add support for enable_iwarp and enable_roce
devlink param") added support for the enable_roce and enable_iwarp
parameters in the ice driver. It didn't document these parameters in the
ice devlink documentation file. Add this documentation, including a note
about the mutual exclusion between the two modes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Palash reports a UAF when using a modified version of syzkaller[1].

When 'tcf_exts_miss_cookie_base_alloc()' fails in 'tcf_exts_init_ex()'
a call to 'tcf_exts_destroy()' is made to free up the tcf_exts
resources.
In flower, a call to '__fl_put()' when 'tcf_exts_init_ex()' fails is made;
Then calling 'tcf_exts_destroy()', which triggers an UAF since the
already freed tcf_exts action pointer is lingering in the struct.

Before the offending patch, this was not an issue since there was no
case where the tcf_exts action pointer could linger. Therefore, restore
the old semantic by clearing the action pointer in case of a failure to
initialize the miss_cookie.

[1] https://github.com/cmu-pasta/linux-kernel-enriched-corpus

v1->v2: Fix compilation on configs without tc actions (kernel test robot)

Fixes: 80cd22c3 ("net/sched: cls_api: Support hardware miss to tc action")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a use-after-free scenario that is:

When the NIC is down, user set mac address or vlan tag to VF,
the xxx_set_vf_mac() or xxx_set_vf_vlan() will invoke efx_net_stop()
and efx_net_open(), since netif_running() is false, the port will not
start and keep port_enabled false, but selftest_work is scheduled
in efx_net_open().

If we remove the device before selftest_work run, the efx_stop_port()
will not be called since the NIC is down, and then efx is freed,
we will soon get a UAF in run_timer_softirq() like this:

[ 1178.907941] ==================================================================
[ 1178.907948] BUG: KASAN: use-after-free in run_timer_softirq+0xdea/0xe90
[ 1178.907950] Write of size 8 at addr ff11001f449cdc80 by task swapper/47/0
[ 1178.907950]
[ 1178.907953] CPU: 47 PID: 0 Comm: swapper/47 Kdump: loaded Tainted: G           O     --------- -t - 4.18.0 #1
[ 1178.907954] Hardware name: SANGFOR X620G40/WI2HG-208T1061A, BIOS SPYH051032-U01 04/01/2022
[ 1178.907955] Call Trace:
[ 1178.907956]  <IRQ>
[ 1178.907960]  dump_stack+0x71/0xab
[ 1178.907963]  print_address_description+0x6b/0x290
[ 1178.907965]  ? run_timer_softirq+0xdea/0xe90
[ 1178.907967]  kasan_report+0x14a/0x2b0
[ 1178.907968]  run_timer_softirq+0xdea/0xe90
[ 1178.907971]  ? init_timer_key+0x170/0x170
[ 1178.907973]  ? hrtimer_cancel+0x20/0x20
[ 1178.907976]  ? sched_clock+0x5/0x10
[ 1178.907978]  ? sched_clock_cpu+0x18/0x170
[ 1178.907981]  __do_softirq+0x1c8/0x5fa
[ 1178.907985]  irq_exit+0x213/0x240
[ 1178.907987]  smp_apic_timer_interrupt+0xd0/0x330
[ 1178.907989]  apic_timer_interrupt+0xf/0x20
[ 1178.907990]  </IRQ>
[ 1178.907991] RIP: 0010:mwait_idle+0xae/0x370

If the NIC is not actually brought up, there is no need to schedule
selftest_work, so let's move invoking efx_selftest_async_start()
into efx_start_all(), and it will be canceled by broughting down.

Fixes: dd40781e ("sfc: Run event/IRQ self-test asynchronously when interface is brought up")
Fixes: e340be92 ("sfc: add ndo_set_vf_mac() function for EF10")
Debugged-by: Huang Cun <huangcun@sangfor.com.cn>
Cc: Donglin Peng <pengdonglin@sangfor.com.cn>
Suggested-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Here we copy the data from the original buf to the new page. But we
not check that it may be overflow.

As long as the size received(including vnethdr) is greater than 3840
(PAGE_SIZE -VIRTIO_XDP_HEADROOM). Then the memcpy will overflow.

And this is completely possible, as long as the MTU is large, such
as 4096. In our test environment, this will cause crash. Since crash is
caused by the written memory, it is meaningless, so I do not include it.

Fixes: 72979a6c ("virtio_net: xdp, add slowpath case for non contiguous buffers")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device.
The MTU of the loopback device can be set up to 2^31-1.
As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX.

Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors.

The following reports a oob access:

[   84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[   84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301
[   84.583686]
[   84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1
[   84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[   84.584644] Call Trace:
[   84.584787]  <TASK>
[   84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
[   84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
[   84.585570] kasan_report (mm/kasan/report.c:538)
[   84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[   84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255)
[   84.587607] dev_qdisc_enqueue (net/core/dev.c:3776)
[   84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212)
[   84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228)
[   84.589460] ip_output (net/ipv4/ip_output.c:430)
[   84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606)
[   84.590285] raw_sendmsg (net/ipv4/raw.c:649)
[   84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[   84.592084] __sys_sendto (net/socket.c:2142)
[   84.593306] __x64_sys_sendto (net/socket.c:2150)
[   84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[   84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[   84.594070] RIP: 0033:0x7fe568032066
[   84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c

Code starting with the faulting instruction
===========================================
[   84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066
[   84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003
[   84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010
[   84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[   84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001
[   84.596218]  </TASK>
[   84.596295]
[   84.596351] Allocated by task 291:
[   84.596467] kasan_save_stack (mm/kasan/common.c:46)
[   84.596597] kasan_set_track (mm/kasan/common.c:52)
[   84.596725] __kasan_kmalloc (mm/kasan/common.c:384)
[   84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974)
[   84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938)
[   84.597100] qdisc_create (net/sched/sch_api.c:1244)
[   84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680)
[   84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174)
[   84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574)
[   84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365)
[   84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942)
[   84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[   84.598016] ____sys_sendmsg (net/socket.c:2501)
[   84.598147] ___sys_sendmsg (net/socket.c:2557)
[   84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586)
[   84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[   84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[   84.598688]
[   84.598744] The buggy address belongs to the object at ffff88810f674000
[   84.598744]  which belongs to the cache kmalloc-8k of size 8192
[   84.599135] The buggy address is located 2664 bytes to the right of
[   84.599135]  allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0)
[   84.599544]
[   84.599598] The buggy address belongs to the physical page:
[   84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670
[   84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[   84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2)
[   84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000
[   84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
[   84.601009] page dumped because: kasan: bad access detected
[   84.601187]
[   84.601241] Memory state around the buggy address:
[   84.601396]  ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.601620]  ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.602069]                                               ^
[   84.602243]  ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.602468]  ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   84.602693] ==================================================================
[   84.602924] Disabling lock debugging due to kernel taint

Fixes: 3015f3d2 ("pkt_sched: enable QFQ to support TSO/GSO")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: Gwangun Jung <exsociety@gmail.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, and bluetooth.

  Not all that quiet given spring celebrations, but "current" fixes are
  thinning out, which is encouraging. One outstanding regression in the
  mlx5 driver when using old FW, not blocking but we're pushing for a
  fix.

  Current release - new code bugs:

   - eth: enetc: workaround for unresponsive pMAC after receiving
     express traffic

  Previous releases - regressions:

   - rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the
     pid/seq fields 0 for backward compatibility

  Previous releases - always broken:

   - sctp: fix a potential overflow in sctp_ifwdtsn_skip

   - mptcp:
      - use mptcp_schedule_work instead of open-coding it and make the
        worker check stricter, to avoid scheduling work on closed
        sockets
      - fix NULL pointer dereference on fastopen early fallback

   - skbuff: fix memory corruption due to a race between skb coalescing
     and releasing clones confusing page_pool reference counting

   - bonding: fix neighbor solicitation validation on backup slaves

   - bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp

   - bpf: arm64: fixed a BTI error on returning to patched function

   - openvswitch: fix race on port output leading to inf loop

   - sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
     returning a different errno than expected

   - phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove

   - Bluetooth: fix printing errors if LE Connection times out

   - Bluetooth: assorted UaF, deadlock and data race fixes

   - eth: macb: fix memory corruption in extended buffer descriptor mode

  Misc:

   - adjust the XDP Rx flow hash API to also include the protocol layers
     over which the hash was computed"

* tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
  mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
  veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
  mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
  xdp: rss hash types representation
  selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
  skbuff: Fix a race between coalescing and releasing SKBs
  net: macb: fix a memory corruption in extended buffer descriptor mode
  selftests: add the missing CONFIG_IP_SCTP in net config
  udp6: fix potential access to stale information
  selftests: openvswitch: adjust datapath NL message declaration
  selftests: mptcp: userspace pm: uniform verify events
  mptcp: fix NULL pointer dereference on fastopen early fallback
  mptcp: stricter state check in mptcp_worker
  mptcp: use mptcp_schedule_work instead of open-coding it
  net: enetc: workaround for unresponsive pMAC after receiving express traffic
  sctp: fix a potential overflow in sctp_ifwdtsn_skip
  net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
  rtnetlink: Restore RTM_NEW/DELLINK notification behavior
  net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
  ...

Pull devicetree fixes from Rob Herring:

 - Fix interaction between fw_devlink and DT overlays causing devices to
   not be probed

 - Fix the compatible string for loongson,cpu-interrupt-controller

* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  treewide: Fix probing of devices in DT overlays
  dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible

Pull pin control fix from Linus Walleij:
 "This is just a revert of the AMD fix, because the fix broke some
  laptops. We are working on a proper solution"

* tag 'pinctrl-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "pinctrl: amd: Disable and mask interrupts on resume"

Pull drm fixes from Daniel Vetter:

 - two fbcon regressions

 - amdgpu: dp mst, smu13

 - i915: dual link dsi for tgl+

 - armada, nouveau, drm/sched, fbmem

* tag 'drm-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm:
  fbcon: set_con2fb_map needs to set con2fb_map!
  fbcon: Fix error paths in set_con2fb_map
  drm/amd/pm: correct the pcie link state check for SMU13
  drm/amd/pm: correct SMU13.0.7 max shader clock reporting
  drm/amd/pm: correct SMU13.0.7 pstate profiling clock settings
  drm/amd/display: Pass the right info to drm_dp_remove_payload
  drm/armada: Fix a potential double free in an error handling path
  fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace
  drm/nouveau/fb: add missing sysmen flush callbacks
  drm/i915/dsi: fix DSS CTL register offsets for TGL+
  drm/scheduler: Fix UAF race in drm_sched_entity_push_job()

Daniel Borkmann says:

====================
pull-request: bpf 2023-04-13

We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 14 files changed, 205 insertions(+), 38 deletions(-).

The main changes are:

1) One late straggler fix on the XDP hints side which fixes
   bpf_xdp_metadata_rx_hash kfunc API before the release goes out
   in order to provide information on the RSS hash type,
   from Jesper Dangaard Brouer.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
  mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
  veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
  mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
  xdp: rss hash types representation
  selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
====================

Link: https://lore.kernel.org/r/20230413192939.10202-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Short summary of fixes pull:

 * armada: Fix double free
 * fb: Clear FB_ACTIVATE_KD_TEXT in ioctl
 * nouveau: Add missing callbacks
 * scheduler: Fix use-after-free error
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413184233.GA8148@linux-uq9g

Jesper Dangaard Brouer says:

====================

Current API for bpf_xdp_metadata_rx_hash() returns the raw RSS hash value,
but doesn't provide information on the RSS hash type (part of 6.3-rc).

This patchset proposal is to change the function call signature via adding
a pointer value argument for providing the RSS hash type.

Patchset also removes all bpf_printk's from xdp_hw_metadata program
that we expect driver developers to use. Instead counters are introduced
for relaying e.g. skip and fail info.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Update BPF selftests to use the new RSS type argument for kfunc
bpf_xdp_metadata_rx_hash.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132894068.340624.8914711185697163690.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type
via matching individual Completion Queue Entry (CQE) status bits.

Fixes: ab46182d ("net/mlx4_en: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132893562.340624.12779118462402031248.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type.

The veth driver currently only support XDP-hints based on SKB code path.
The SKB have lost information about the RSS hash type, by compressing
the information down to a single bitfield skb->l4_hash, that only knows
if this was a L4 hash value.

In preparation for veth, the xdp_rss_hash_type have an L4 indication
bit that allow us to return a meaningful L4 indication when working
with SKB based packets.

Fixes: 306531f0 ("veth: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132893055.340624.16209448340644513469.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type
via mapping table.

The mlx5 hardware can also identify and RSS hash IPSEC.  This indicate
hash includes SPI (Security Parameters Index) as part of IPSEC hash.

Extend xdp core enum xdp_rss_hash_type with IPSEC hash type.

Fixes: bc8d405b ("net/mlx5e: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892548.340624.11185734579430124869.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The RSS hash type specifies what portion of packet data NIC hardware used
when calculating RSS hash value. The RSS types are focused on Internet
traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash
value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4
primarily TCP vs UDP, but some hardware supports SCTP.

Hardware RSS types are differently encoded for each hardware NIC. Most
hardware represent RSS hash type as a number. Determining L3 vs L4 often
requires a mapping table as there often isn't a pattern or sorting
according to ISO layer.

The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that
contains both BITs for the L3/L4 types, and combinations to be used by
drivers for their mapping tables. The enum xdp_rss_type_bits get exposed
to BPF via BTF, and it is up to the BPF-programmer to match using these
defines.

This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding
a pointer value argument for provide the RSS hash type.
Change signature for all xmo_rx_hash calls in drivers to make it compile.

The RSS type implementations for each driver comes as separate patches.

Fixes: 3d76a4d3 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892042.340624.582563003880565460.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The tool xdp_hw_metadata can be used by driver developers
implementing XDP-hints metadata kfuncs.

Remove all bpf_printk calls, as the tool already transfers all the
XDP-hints related information via metadata area to AF_XDP
userspace process.

Add counters for providing remaining information about failure and
skipped packet events.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132891533.340624.7313781245316405141.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

I got really badly confused in d443d938 ("fbcon: move more common
code into fb_open()") because we set the con2fb_map before the failure
points, which didn't look good.

But in trying to fix that I moved the assignment into the wrong path -
we need to do it for _all_ vc we take over, not just the first one
(which additionally requires the call to con2fb_acquire_newinfo).

I've figured this out because of a KASAN bug report, where the
fbcon_registered_fb and fbcon_display arrays went out of sync in
fbcon_mode_deleted() because the con2fb_map pointed at the old
fb_info, but the modes and everything was updated for the new one.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: d443d938 ("fbcon: move more common code into fb_open()")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.19+

This is a regressoin introduced in b07db395 ("fbcon: Ditch error
handling for con2fb_release_oldinfo"). I failed to realize what the if
(!err) checks. The mentioned commit was dropping the
con2fb_release_oldinfo() return value but the if (!err) was also
checking whether the con2fb_acquire_newinfo() function call above
failed or not.

Fix this with an early return statement.

Note that there's still a difference compared to the orginal state of
the code, the below lines are now also skipped on error:

	if (!search_fb_in_map(info_idx))
		info_idx = newidx;

These are only needed when we've actually thrown out an old fb_info
from the console mappings, which only happens later on.

Also move the fbcon_add_cursor_work() call into the same if block,
it's all protected by console_lock so doesn't matter when we set up
the blinking cursor delayed work anyway. This further simplifies the
control flow and allows us to ditch the found local variable.

v2: Clarify commit message (Javier)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: b07db395 ("fbcon: Ditch error handling for con2fb_release_oldinfo")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.19+

Commit 1effe8ca ("skbuff: fix coalescing for page_pool fragment
recycling") allowed coalescing to proceed with non page pool page and page
pool page when @from is cloned, i.e.

to->pp_recycle    --> false
from->pp_recycle  --> true
skb_cloned(from)  --> true

However, it actually requires skb_cloned(@from) to hold true until
coalescing finishes in this situation. If the other cloned SKB is
released while the merging is in process, from_shinfo->nr_frags will be
set to 0 toward the end of the function, causing the increment of frag
page _refcount to be unexpectedly skipped resulting in inconsistent
reference counts. Later when SKB(@to) is released, it frees the page
directly even though the page pool page is still in use, leading to
use-after-free or double-free errors. So it should be prohibited.

The double-free error message below prompted us to investigate:
BUG: Bad page state in process swapper/1  pfn:0e0d1
page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000
index:0x2 pfn:0xe0d1
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000
raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount

CPU: 1 PID: 0 Comm: swapper/1 Tainted: G            E      6.2.0+
Call Trace:
 <IRQ>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_pcp_prepare+0x260/0x2f0
free_unref_page+0x20/0x1c0
skb_release_data+0x10b/0x1a0
napi_consume_skb+0x56/0x150
net_rx_action+0xf0/0x350
? __napi_schedule+0x79/0x90
__do_softirq+0xc8/0x2b1
__irq_exit_rcu+0xb9/0xf0
common_interrupt+0x82/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0xb/0x20

Fixes: 53e0961d ("page_pool: add frag page recycling support in page pool")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230413090353.14448-1-liangchen.linux@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For quite some time we were chasing a bug which looked like a sudden
permanent failure of networking and mmc on some of our devices.
The bug was very sensitive to any software changes and even more to
any kernel debug options.

Finally we got a setup where the problem was reproducible with
CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:

[   16.992082] ------------[ cut here ]------------
[   16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes]
[   17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900
[   17.018977] Modules linked in: xxxxx
[   17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28
[   17.045345] Hardware name: xxxxx
[   17.049528] pstate: 60000005 (nZCv daif -PAN -UAO)
[   17.054322] pc : check_unmap+0x6a0/0x900
[   17.058243] lr : check_unmap+0x6a0/0x900
[   17.062163] sp : ffffffc010003c40
[   17.065470] x29: ffffffc010003c40 x28: 000000004000c03c
[   17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800
[   17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8
[   17.081407] x23: 0000000000000000 x22: ffffffc010a08750
[   17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000
[   17.092032] x19: 0000000875e3e244 x18: 0000000000000010
[   17.097343] x17: 0000000000000000 x16: 0000000000000000
[   17.102647] x15: ffffff8879e4a988 x14: 0720072007200720
[   17.107959] x13: 0720072007200720 x12: 0720072007200720
[   17.113261] x11: 0720072007200720 x10: 0720072007200720
[   17.118565] x9 : 0720072007200720 x8 : 000000000000022d
[   17.123869] x7 : 0000000000000015 x6 : 0000000000000098
[   17.129173] x5 : 0000000000000000 x4 : 0000000000000000
[   17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370
[   17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000
[   17.145082] Call trace:
[   17.147524]  check_unmap+0x6a0/0x900
[   17.151091]  debug_dma_unmap_page+0x88/0x90
[   17.155266]  gem_rx+0x114/0x2f0
[   17.158396]  macb_poll+0x58/0x100
[   17.161705]  net_rx_action+0x118/0x400
[   17.165445]  __do_softirq+0x138/0x36c
[   17.169100]  irq_exit+0x98/0xc0
[   17.172234]  __handle_domain_irq+0x64/0xc0
[   17.176320]  gic_handle_irq+0x5c/0xc0
[   17.179974]  el1_irq+0xb8/0x140
[   17.183109]  xiic_process+0x5c/0xe30
[   17.186677]  irq_thread_fn+0x28/0x90
[   17.190244]  irq_thread+0x208/0x2a0
[   17.193724]  kthread+0x130/0x140
[   17.196945]  ret_from_fork+0x10/0x20
[   17.200510] ---[ end trace 7240980785f81d6f ]---

[  237.021490] ------------[ cut here ]------------
[  237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b
[  237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240
[  237.041802] Modules linked in: xxxxx
[  237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.4.0 #28
[  237.068941] Hardware name: xxxxx
[  237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[  237.077900] pc : add_dma_entry+0x214/0x240
[  237.081986] lr : add_dma_entry+0x214/0x240
[  237.086072] sp : ffffffc010003c30
[  237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00
[  237.094683] x27: 0000000000000180 x26: ffffff8878e387c0
[  237.099987] x25: 0000000000000002 x24: 0000000000000000
[  237.105290] x23: 000000000000003b x22: ffffffc010a0fa00
[  237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600
[  237.115897] x19: 00000000ffffffef x18: 0000000000000010
[  237.121201] x17: 0000000000000000 x16: 0000000000000000
[  237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720
[  237.131807] x13: 0720072007200720 x12: 0720072007200720
[  237.137111] x11: 0720072007200720 x10: 0720072007200720
[  237.142415] x9 : 0720072007200720 x8 : 0000000000000259
[  237.147718] x7 : 0000000000000001 x6 : 0000000000000000
[  237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001
[  237.158325] x3 : 0000000000000006 x2 : 0000000000000007
[  237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000
[  237.168932] Call trace:
[  237.171373]  add_dma_entry+0x214/0x240
[  237.175115]  debug_dma_map_page+0xf8/0x120
[  237.179203]  gem_rx_refill+0x190/0x280
[  237.182942]  gem_rx+0x224/0x2f0
[  237.186075]  macb_poll+0x58/0x100
[  237.189384]  net_rx_action+0x118/0x400
[  237.193125]  __do_softirq+0x138/0x36c
[  237.196780]  irq_exit+0x98/0xc0
[  237.199914]  __handle_domain_irq+0x64/0xc0
[  237.204000]  gic_handle_irq+0x5c/0xc0
[  237.207654]  el1_irq+0xb8/0x140
[  237.210789]  arch_cpu_idle+0x40/0x200
[  237.214444]  default_idle_call+0x18/0x30
[  237.218359]  do_idle+0x200/0x280
[  237.221578]  cpu_startup_entry+0x20/0x30
[  237.225493]  rest_init+0xe4/0xf0
[  237.228713]  arch_call_rest_init+0xc/0x14
[  237.232714]  start_kernel+0x47c/0x4a8
[  237.236367] ---[ end trace 7240980785f81d70 ]---

Lars was fast to find an explanation: according to the datasheet
bit 2 of the rx buffer descriptor entry has a different meaning in the
extended mode:
  Address [2] of beginning of buffer, or
  in extended buffer descriptor mode (DMA configuration register [28] = 1),
  indicates a valid timestamp in the buffer descriptor entry.

The macb driver didn't mask this bit while getting an address and it
eventually caused a memory corruption and a dma failure.

The problem is resolved by explicitly clearing the problematic bit
if hw timestamping is used.

Fixes: 7b429614 ("net: macb: Add support for PTP timestamps in DMA descriptors")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Co-developed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230412232144.770336-1-roman.gushchin@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The selftest sctp_vrf needs CONFIG_IP_SCTP set in config
when building the kernel, so add it.

Fixes: a61bd7b9 ("selftests: add a selftest for sctp vrf")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/61dddebc4d2dd98fe7fb145e24d4b2430e42b572.1681312386.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

lena wang reported an issue caused by udpv6_sendmsg()
mangling msg->msg_name and msg->msg_namelen, which
are later read from ____sys_sendmsg() :

	/*
	 * If this is sendmmsg() and sending to current destination address was
	 * successful, remember it.
	 */
	if (used_address && err >= 0) {
		used_address->name_len = msg_sys->msg_namelen;
		if (msg_sys->msg_name)
			memcpy(&used_address->name, msg_sys->msg_name,
			       used_address->name_len);
	}

udpv6_sendmsg() wants to pretend the remote address family
is AF_INET in order to call udp_sendmsg().

A fix would be to modify the address in-place, instead
of using a local variable, but this could have other side effects.

Instead, restore initial values before we return from udpv6_sendmsg().

Fixes: c71d8ebe ("net: Fix security_socket_sendmsg() bypass problem.")
Reported-by: lena wang <lena.wang@mediatek.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The netlink message for creating a new datapath takes an array
of ports for the PID creation.  This shouldn't cause much issue
but correct it for future cases where we need to do decode of
datapath information that could include the per-cpu PID map.

Fixes: 25f16c87 ("selftests: add openvswitch selftest suite")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230412115828.3991806-1-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: more fixes for 6.3

Patch 1 avoids scheduling the MPTCP worker on a closed socket on some
edge cases. It fixes issues that can be visible from v5.11.

Patch 2 makes sure the MPTCP worker doesn't try to manipulate
disconnected sockets. This is also a fix for an issue that can be
visible from v5.11.

Patch 3 fixes a NULL pointer dereference when MPTCP FastOpen is used
and an early fallback is done. A fix for v6.2.

Patch 4 improves the stability of the userspace PM selftest for a
subtest added in v6.2.
====================

Link: https://lore.kernel.org/r/20230411-upstream-net-20230411-mptcp-fixes-v1-0-ca540f3ef986@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simply adding a "sleep" before checking something is usually not a good
idea because the time that has been picked can not be enough or too
much. The best is to wait for events with a timeout.

In this selftest, 'sleep 0.5' is used more than 40 times. It is always
used before calling a 'verify_*' function except for this
verify_listener_events which has been added later.

At the end, using all these 'sleep 0.5' seems to work: the slow CIs
don't complain so far. Also because it doesn't take too much time, we
can just add two more 'sleep 0.5' to uniform what is done before calling
a 'verify_*' function. For the same reasons, we can also delay a bigger
refactoring to replace all these 'sleep 0.5' by functions waiting for
events instead of waiting for a fix time and hope for the best.

Fixes: 6c73008a ("selftests: mptcp: listener test for userspace PM")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In case of early fallback to TCP, subflow_syn_recv_sock() deletes
the subflow context before returning the newly allocated sock to
the caller.

The fastopen path does not cope with the above unconditionally
dereferencing the subflow context.

Fixes: 36b122ba ("mptcp: add subflow_v(4,6)_send_synack()")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As reported by Christoph, the mptcp protocol can run the
worker when the relevant msk socket is in an unexpected state:

connect()
// incoming reset + fastclose
// the mptcp worker is scheduled
mptcp_disconnect()
// msk is now CLOSED
listen()
mptcp_worker()

Leading to the following splat:

divide error: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018
RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293
RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004
RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000
R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 tcp_select_window net/ipv4/tcp_output.c:262 [inline]
 __tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345
 tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
 tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459
 mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline]
 mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705
 process_one_work+0x3bd/0x950 kernel/workqueue.c:2390
 worker_thread+0x5b/0x610 kernel/workqueue.c:2537
 kthread+0x138/0x170 kernel/kthread.c:376
 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
 </TASK>

This change addresses the issue explicitly checking for bad states
before running the mptcp worker.

Fixes: e16163b6 ("mptcp: refactor shutdown and close")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/374Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Beyond reducing code duplication this also avoids scheduling
the mptcp_worker on a closed socket on some edge scenarios.

The addressed issue is actually older than the blamed commit
below, but this fix needs it as a pre-requisite.

Fixes: ba8f48f7 ("mptcp: introduce mptcp_schedule_work")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'drm-intel-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v6.3-rc7:
- Fix dual link DSI for TGL+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/877cugckzu.fsf@intel.com

I have observed an issue where the RX direction of the LS1028A ENETC pMAC
seems unresponsive. The minimal procedure to reproduce the issue is:

1. Connect ENETC port 0 with a loopback RJ45 cable to one of the Felix
   switch ports (0).

2. Bring the ports up (MAC Merge layer is not enabled on either end).

3. Send a large quantity of unidirectional (express) traffic from Felix
   to ENETC. I tried altering frame size and frame count, and it doesn't
   appear to be specific to either of them, but rather, to the quantity
   of octets received. Lowering the frame count, the minimum quantity of
   packets to reproduce relatively consistently seems to be around 37000
   frames at 1514 octets (w/o FCS) each.

4. Using ethtool --set-mm, enable the pMAC in the Felix and in the ENETC
   ports, in both RX and TX directions, and with verification on both
   ends.

5. Wait for verification to complete on both sides.

6. Configure a traffic class as preemptible on both ends.

7. Send some packets again.

The issue is at step 5, where the verification process of ENETC ends
(meaning that Felix responds with an SMD-R and ENETC sees the response),
but the verification process of Felix never ends (it remains VERIFYING).

If step 3 is skipped or if ENETC receives less traffic than
approximately that threshold, the test runs all the way through
(verification succeeds on both ends, preemptible traffic passes fine).

If, between step 4 and 5, the step below is also introduced:

4.1. Disable and re-enable PM0_COMMAND_CONFIG bit RX_EN

then again, the sequence of steps runs all the way through, and
verification succeeds, even if there was the previous RX traffic
injected into ENETC.

Traffic sent *by* the ENETC port prior to enabling the MAC Merge layer
does not seem to influence the verification result, only received
traffic does.

The LS1028A manual does not mention any relationship between
PM0_COMMAND_CONFIG and MMCSR, and the hardware people don't seem to
know for now either.

The bit that is toggled to work around the issue is also toggled
by enetc_mac_enable(), called from phylink's mac_link_down() and
mac_link_up() methods - which is how the workaround was found:
verification would work after a link down/up.

Fixes: c7b9e808 ("net: enetc: add support for MAC Merge layer")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230411192645.1896048-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only
checks the pos against the end of the chunk. However, the data left for
the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference
it as struct sctp_ifwdtsn_skip may cause coverflow.

This patch fixes it by checking the pos against "the end of the chunk -
sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to
sctp_fwdtsn_skip.

Fixes: 0fc2ea92 ("sctp: implement validate_ftsn for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/2a71bffcd80b4f2c61fac6d344bb2f11c8fd74f7.1681155810.git.lucien.xin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'amd-drm-fixes-6.3-2023-04-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.3-2023-04-12:

amdgpu:
- SMU13 fixes
- DP MST fix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412215637.7881-1-alexander.deucher@amd.com

Syzbot reported a bug as following:

=====================================================
BUG: KMSAN: uninit-value in qrtr_tx_resume+0x185/0x1f0 net/qrtr/af_qrtr.c:230
 qrtr_tx_resume+0x185/0x1f0 net/qrtr/af_qrtr.c:230
 qrtr_endpoint_post+0xf85/0x11b0 net/qrtr/af_qrtr.c:519
 qrtr_tun_write_iter+0x270/0x400 net/qrtr/tun.c:108
 call_write_iter include/linux/fs.h:2189 [inline]
 aio_write+0x63a/0x950 fs/aio.c:1600
 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
 __do_sys_io_submit fs/aio.c:2078 [inline]
 __se_sys_io_submit+0x293/0x770 fs/aio.c:2048
 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:766 [inline]
 slab_alloc_node mm/slub.c:3452 [inline]
 __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
 __do_kmalloc_node mm/slab_common.c:967 [inline]
 __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988
 kmalloc_reserve net/core/skbuff.c:492 [inline]
 __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565
 __netdev_alloc_skb+0x120/0x7d0 net/core/skbuff.c:630
 qrtr_endpoint_post+0xbd/0x11b0 net/qrtr/af_qrtr.c:446
 qrtr_tun_write_iter+0x270/0x400 net/qrtr/tun.c:108
 call_write_iter include/linux/fs.h:2189 [inline]
 aio_write+0x63a/0x950 fs/aio.c:1600
 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
 __do_sys_io_submit fs/aio.c:2078 [inline]
 __se_sys_io_submit+0x293/0x770 fs/aio.c:2048
 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

It is because that skb->len requires at least sizeof(struct qrtr_ctrl_pkt)
in qrtr_tx_resume(). And skb->len equals to size in qrtr_endpoint_post().
But size is less than sizeof(struct qrtr_ctrl_pkt) when qrtr_cb->type
equals to QRTR_TYPE_RESUME_TX in qrtr_endpoint_post() under the syzbot
scenario. This triggers the uninit variable access bug.

Add size check when qrtr_cb->type equals to QRTR_TYPE_RESUME_TX in
qrtr_endpoint_post() to fix the bug.

Fixes: 5fdeb0d3 ("net: qrtr: Implement outgoing flow control")
Reported-by: syzbot+4436c9630a45820fda76@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=c14607f0963d27d5a3d5f4c8639b500909e43540Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230410012352.3997823-1-william.xuanziyang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The commits referenced below allows userspace to use the NLM_F_ECHO flag
for RTM_NEW/DELLINK operations to receive unicast notifications for the
affected link. Prior to these changes, applications may have relied on
multicast notifications to learn the same information without specifying
the NLM_F_ECHO flag.

For such applications, the mentioned commits changed the behavior for
requests not using NLM_F_ECHO. Multicast notifications are still received,
but now use the portid of the requester and the sequence number of the
request instead of zero values used previously. For the application, this
message may be unexpected and likely handled as a response to the
NLM_F_ACKed request, especially if it uses the same socket to handle
requests and notifications.

To fix existing applications relying on the old notification behavior,
set the portid and sequence number in the notification only if the
request included the NLM_F_ECHO flag. This restores the old behavior
for applications not using it, but allows unicasted notifications for
others.

Fixes: f3a63cce ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link")
Fixes: d88e136c ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create")
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull HID fixes from Jiri Kosina:

 - kernel panic fix for intel-ish-hid driver (Tanu Malhotra)

 - buffer overflow fix in hid-sensor-custom driver (Todd Brandt)

 - two device specific quirks (Alessandro Manca, Philippe Troin)

* tag 'for-linus-2023041201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: Fix kernel panic during warm reset
  HID: hid-sensor-custom: Fix buffer overrun in device name
  HID: topre: Add support for 87 keys Realforce R2
  HID: add HP 13t-aw100 & 14t-ea100 digitizer battery quirks

Pull dmaengine fixes from Vinod Koul:
 "A couple of fixes in apple driver, core and kernedoc fix for dmaengine
  subsystem:

   - apple admac driver fixes for current_tx, src_addr_widths and
     global' interrupt flags handling

   - xdma kerneldoc fix

   - core fix for use of devm_add_action_or_reset"

* tag 'dmaengine-fix-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: apple-admac: Fix 'current_tx' not getting freed
  dmaengine: apple-admac: Set src_addr_widths capability
  dmaengine: apple-admac: Handle 'global' interrupt flags
  dmaengine: xilinx: xdma: Fix some kernel-doc comments
  dmaengine: Actually use devm_add_action_or_reset()