- 27 Oct, 2023 40 commits
-
-
Damian Muszynski authored
There is going to be a new user of the BYTES_PER_[K/M/G]BIT definition besides possibly existing ones. Add them to the header. Signed-off-by:
Damian Muszynski <damian.muszynski@intel.com> Reviewed-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by:
Tero Kristo <tero.kristo@linux.intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Giovanni Cabiddu authored
The admin API is growing and deserves its own include. Move it from adf_common_drv.h to adf_admin.h. Signed-off-by:
-
Giovanni Cabiddu authored
The 4xxx drivers hardcode the ring to service mapping. However, when additional configurations where added to the driver, the mappings were not updated. This implies that an incorrect mapping might be reported through pfvf for certain configurations. Add an algorithm that computes the correct ring to service mapping based on the firmware loaded on the device. Fixes: 0cec19c7 ("crypto: qat - add support for compression for 4xxx") Signed-off-by:
-
Giovanni Cabiddu authored
The adf_fw_config structures hardcode a bit mask that represents the acceleration engines (AEs) where a certain firmware image will have to be loaded to. Remove the hardcoded masks and replace them with defines. This does not introduce any functional change. Signed-off-by:
-
Giovanni Cabiddu authored
The logic that selects the correct adf_fw_config structure based on the configured service is replicated twice in the uof_get_name() and uof_get_ae_mask() functions. Refactor the code so that there is no replication. This does not introduce any functional change. Signed-off-by:
-
Shashank Gupta authored
Add logic to count correctable, non fatal and fatal error for QAT GEN4 devices. These counters are reported through sysfs attributes in the group qat_ras. Signed-off-by:
Shashank Gupta <shashank.gupta@intel.com> Reviewed-by:
-
Shashank Gupta authored
Introduce ras counters interface for counting QAT specific device errors and expose them through the newly created qat_ras sysfs group attribute. This adds the following attributes: - errors_correctable: number of correctable errors - errors_nonfatal: number of uncorrectable non fatal errors - errors_fatal: number of uncorrectable fatal errors - reset_error_counters: resets all counters These counters are initialized during device bring up and cleared during device shutdown and are applicable only to QAT GEN4 devices. Signed-off-by:
-
Shashank Gupta authored
Add logic to detect, report and handle uncorrectable errors reported through the ERRSOU3 register in QAT GEN4 devices. Signed-off-by:
-
Shashank Gupta authored
Add the function adf_get_aram_base() which allows to return the base address of the aram bar. Signed-off-by:
-
Shashank Gupta authored
Add logic to detect, report and handle correctable and uncorrectable errors related to the compression hardware. These are detected through the EXPRPSSMXLT, EXPRPSSMCPR and EXPRPSSMDCPR registers. Signed-off-by:
-
Shashank Gupta authored
Add logic to detect, report and handle uncorrectable errors reported through the ERRSOU2 register in QAT GEN4 devices. Signed-off-by:
-
Shashank Gupta authored
Add logic to detect and report uncorrectable errors reported through the ERRSOU1 register in QAT GEN4 devices. This also introduces the adf_dev_err_mask structure as part of adf_hw_device_data which will allow to provide different error masks per device generation. Signed-off-by:
-
Shashank Gupta authored
Add logic to detect and report correctable errors in QAT GEN4 devices. This includes (1) enabling, disabling and handling error reported through the ERRSOU0 register and (2) logic to log the errors in the system log. Signed-off-by:
-
Shashank Gupta authored
Add infrastructure for enabling, disabling and reporting errors in the QAT driver. This adds a new structure, adf_ras_ops, to adf_hw_device_data that contains the following methods: - enable_ras_errors(): allows to enable RAS errors at device initialization. - disable_ras_errors(): allows to disable RAS errors at device shutdown. - handle_interrupt(): allows to detect if there is an error and report if a reset is required. This is executed immediately after the error is reported, in the context of an ISR. An initial, empty, implementation of the methods above is provided for QAT GEN4. Signed-off-by: -
Longfang Liu authored
In the scenario where the accelerator business is fully loaded. When the workqueue receiving messages and performing callback processing, there are a large number of messages that need to be received, and there are continuously messages that have been processed and need to be received. This will cause the receive loop here to be locked for a long time. This scenario will cause watchdog timeout problems on OS with kernel preemption turned off. The error logs: watchdog: BUG: soft lockup - CPU#23 stuck for 23s! [kworker/u262:1:1407] [ 1461.978428][ C23] Call trace: [ 1461.981890][ C23] complete+0x8c/0xf0 [ 1461.986031][ C23] kcryptd_async_done+0x154/0x1f4 [dm_crypt] [ 1461.992154][ C23] sec_skcipher_callback+0x7c/0xf4 [hisi_sec2] [ 1461.998446][ C23] sec_req_cb+0x104/0x1f4 [hisi_sec2] [ 1462.003950][ C23] qm_poll_req_cb+0xcc/0x150 [hisi_qm] [ 1462.009531][ C23] qm_work_process+0x60/0xc0 [hisi_qm] [ 1462.015101][ C23] process_one_work+0x1c4/0x470 [ 1462.020052][ C23] worker_thread+0x150/0x3c4 [ 1462.024735][ C23] kthread+0x108/0x13c [ 1462.028889][ C23] ret_from_fork+0x10/0x18 Therefore, it is necessary to add an actively scheduled operation in the while loop to prevent this problem. After adding it, no matter whether the OS turns on or off the kernel preemption function. Neither will cause watchdog timeout issues. Signed-off-by:
Longfang Liu <liulongfang@huawei.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Michal Simek <michal.simek@amd.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. The driver adapted here suffered from this wrong assumption and had several error paths resulting in resource leaks. The check for cryp being non-NULL is harmless. This can never happen as .remove() is only called after .probe() completed successfully and in that case drvdata was set to a non-NULL value. So this check can just be dropped. If pm_runtime_get() fails, the other resources held by the device must still be freed. Only clk_disable_unprepare() should be skipped as the pm_runtime_get() failed to call clk_prepare_enable(). After these changes the remove function returns zero unconditionally and can trivially be converted to the prototype required for .remove_new(). Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. The driver adapted here suffered from this wrong assumption and had an error paths resulting in resource leaks. If pm_runtime_get() fails, the other resources held by the device must still be freed. Only clk_disable() should be skipped as the pm_runtime_get() failed to call clk_enable(). After this change the remove function returns zero unconditionally and can trivially be converted to the prototype required for .remove_new(). Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Acked-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Weili Qian <qianweili@huawei.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
