- 22 Apr, 2010 28 commits
-
-
andrew hendry authored
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
andrew hendry authored
Change magic numbers to identifiers for X25 interface. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
andrew hendry authored
Change magic numbers to identifiers for X25 interface. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
andrew hendry authored
Change magic numbers to identifiers for X25 interface. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
andrew hendry authored
Change magic numbers to identifiers for X25 interface. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
andrew hendry authored
Change magic numbers to identifiers for X25 interface. also minor check patch formatting. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Hendry authored
V2 Feedback from John Hughes. - Add header for userspace implementations such as xot/xoe to use - Use explicit values for interface stability - No changes to driver patches V1 - Use identifiers instead of magic numbers for X25 layer 3 to device interface. - Also fixed checkpatch notes on updated code. [ Add new user header to include/linux/Kbuild -DaveM ] Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
__sk_dst_get() might be called from softirq, with socket lock held. [ 159.026180] include/net/sock.h:1200 invoked rcu_dereference_check() without protection! [ 159.026261] [ 159.026261] other info that might help us debug this: [ 159.026263] [ 159.026425] [ 159.026426] rcu_scheduler_active = 1, debug_locks = 0 [ 159.026552] 2 locks held by swapper/0: [ 159.026609] #0: (&icsk->icsk_retransmit_timer){+.-...}, at: [<ffffffff8104fc15>] run_timer_softirq+0x105/0x350 [ 159.026839] #1: (slock-AF_INET){+.-...}, at: [<ffffffff81392b8f>] tcp_write_timer+0x2f/0x1e0 [ 159.027063] [ 159.027064] stack backtrace: [ 159.027172] Pid: 0, comm: swapper Not tainted 2.6.34-rc5-03707-gde498c89-dirty #36 [ 159.027252] Call Trace: [ 159.027306] <IRQ> [<ffffffff810718ef>] lockdep_rcu_dereference +0xaf/0xc0 [ 159.027411] [<ffffffff8138e4f7>] tcp_current_mss+0xa7/0xb0 [ 159.027537] [<ffffffff8138fa49>] tcp_write_wakeup+0x89/0x190 [ 159.027600] [<ffffffff81391936>] tcp_send_probe0+0x16/0x100 [ 159.027726] [<ffffffff81392cd9>] tcp_write_timer+0x179/0x1e0 [ 159.027790] [<ffffffff8104fca1>] run_timer_softirq+0x191/0x350 [ 159.027980] [<ffffffff810477ed>] __do_softirq+0xcd/0x200 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul LeoNerd Evans authored
Add an SKF_AD_HATYPE field to the packet ancilliary data area, giving access to skb->dev->type, as reported in the sll_hatype field. When capturing packets on a PF_PACKET/SOCK_RAW socket bound to all interfaces, there doesn't appear to be a way for the filter program to actually find out the underlying hardware type the packet was captured on. This patch adds such ability. This patch also handles the case where skb->dev can be NULL, such as on netlink sockets. Signed-off-by: Paul Evans <leonerd@leonerd.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Account for TSO segments of an skb in TCP_MIB_OUTSEGS counter. Without doing this, the counter can be off by orders of magnitude from the actual number of segments sent. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Update version to indicate IDC(fw recovery) changes. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
We do netif_device_attach, even if resource allocation fails. Driver callbacks can be called, if device is attached. All these callbacks need to be protected by ADAPTER_UP_MAGIC check. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Rcv producer value should be read in spin-lock. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Driver should not go ahead with fw recovery if fails to acquire semaphore. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Defining macro to set and clear driver state. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Now any pci-func can start fw, whoever sees the reset ack first. Before this, pci-func which sets the RESET state has the responsibility to start fw. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Different class of drivers co-exist for CNA device, there is some minimal interaction that will be required amongst the drivers for performing some device level operations. All the driver should follow inter driver coexistence document. Fixing polling interval and spelling mistake. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Added additional driver statistics to track errors in rcv/tx path. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
This patch adds IPv6 support for RFC5082 Generalized TTL Security Mechanism. Not to users of mapped address; the IPV6 and IPV4 socket options are seperate. The server does have to deal with both IPv4 and IPv6 socket options and the client has to handle the different for each family. On client: int ttl = 255; getaddrinfo(argv[1], argv[2], &hint, &result); for (rp = result; rp != NULL; rp = rp->ai_next) { s = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol); if (s < 0) continue; if (rp->ai_family == AF_INET) { setsockopt(s, IPPROTO_IP, IP_TTL, &ttl, sizeof(ttl)); } else if (rp->ai_family == AF_INET6) { setsockopt(s, IPPROTO_IPV6, IPV6_UNICAST_HOPS, &ttl, sizeof(ttl))) } if (connect(s, rp->ai_addr, rp->ai_addrlen) == 0) { ... On server: int minttl = 255 - maxhops; getaddrinfo(NULL, port, &hints, &result); for (rp = result; rp != NULL; rp = rp->ai_next) { s = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol); if (s < 0) continue; if (rp->ai_family == AF_INET6) setsockopt(s, IPPROTO_IPV6, IPV6_MINHOPCOUNT, &minttl, sizeof(minttl)); setsockopt(s, IPPROTO_IP, IP_MINTTL, &minttl, sizeof(minttl)); if (bind(s, rp->ai_addr, rp->ai_addrlen) == 0) break ... Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This way GSO packets don't get handled differently. With help from Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
-
Eric Dumazet authored
If some skb are queued to our backlog, we are delaying IPI sending at the end of net_rx_action(), increasing latencies. This defeats the queueing, since we want to quickly dispatch packets to the pool of worker cpus, then eventually deeply process our packets. It's better to send IPI before processing our packets in upper layers, from process_backlog(). Change the _and_disable_irq suffix to _and_enable_irq(), since we enable local irq in net_rps_action(), sorry for the confusion. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roland Dreier authored
Also put t4_write_indirect() inside "#if 0" to avoid a "defined but not used" compile warning. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roland Dreier authored
Use the correct direction of byte-swapping function to fix a mistake shown by sparse endianness checking -- c.fl0id is __be16. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Eric's recent patch added __force, but this place would seem to require actually doing a byte order conversion so the printk is consistent across architectures. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
At this point, skb->destructor is not the original one (stored in DEV_GSO_CB(skb)->destructor) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Klein authored
Force serialization of userspace-triggered DLPAR/mem operations Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Klein authored
Reset a port's resources only if they're actually in an error state Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Apr, 2010 12 commits
-
-
Richard Röjfors authored
This patch adds platform data to the ks8842 driver. Via the platform data a MAC address, to be used by the controller, can be passed. To ensure this MAC address is used, the MAC address is written after each hardware reset. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikanth Karthikesan authored
Remove the always true #if 1. Also the unecessary re-test of ei_local->irqlock and the unreachable printk format string. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
kill_fasync() uses a central rwlock, candidate for RCU conversion, to avoid cache line ping pongs on SMP. fasync_remove_entry() and fasync_add_entry() can disable IRQS on a short section instead during whole list scan. Use a spinlock per fasync_struct to synchronize kill_fasync_rcu() and fasync_{remove|add}_entry(). This spinlock is IRQ safe, so sock_fasync() doesnt need its own implementation and can use fasync_helper(), to reduce code size and complexity. We can remove __kill_fasync() direct use in net/socket.c, and rename it to kill_fasync_rcu(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Otherwise we only get the checksum right for data-less TCP responses. Noticed by Herbert Xu. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Commit 6651ffc8 ("ipv6: Fix tcp_v6_send_response transport header setting.") fixed one half of why ipv6 tcp response checksums were invalid, but it's not the whole story. If we're going to use CHECKSUM_PARTIAL for these things (which we are since commit 2e8e18ef "tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb"), we can't be setting buff->csum as we always have been here in tcp_v6_send_response. We need to leave it at zero. Kill that line and checksums are good again. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Conflicts: drivers/net/wireless/iwlwifi/iwl-6000.c net/core/dev.c
-
David Howells authored
Fix the following RCU warning in dev_pick_tx(): =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- net/core/dev.c:1993 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by swapper/0: #0: (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff81039e65>] run_timer_softirq+0x17b/0x278 #1: (rcu_read_lock_bh){.+....}, at: [<ffffffff812ea3eb>] dev_queue_xmit+0x14e/0x4dc stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.34-rc5-cachefs #4 Call Trace: <IRQ> [<ffffffff810516c4>] lockdep_rcu_dereference+0xaa/0xb2 [<ffffffff812ea4f6>] dev_queue_xmit+0x259/0x4dc [<ffffffff812ea3eb>] ? dev_queue_xmit+0x14e/0x4dc [<ffffffff81052324>] ? trace_hardirqs_on+0xd/0xf [<ffffffff81035362>] ? local_bh_enable_ip+0xbc/0xc1 [<ffffffff812f0954>] neigh_resolve_output+0x24b/0x27c [<ffffffff8134f673>] ip6_output_finish+0x7c/0xb4 [<ffffffff81350c34>] ip6_output2+0x256/0x261 [<ffffffff81052324>] ? trace_hardirqs_on+0xd/0xf [<ffffffff813517fb>] ip6_output+0xbbc/0xbcb [<ffffffff8135bc5d>] ? fib6_force_start_gc+0x2b/0x2d [<ffffffff81368acb>] mld_sendpack+0x273/0x39d [<ffffffff81368858>] ? mld_sendpack+0x0/0x39d [<ffffffff81052099>] ? mark_held_locks+0x52/0x70 [<ffffffff813692fc>] mld_ifc_timer_expire+0x24f/0x288 [<ffffffff81039ed6>] run_timer_softirq+0x1ec/0x278 [<ffffffff81039e65>] ? run_timer_softirq+0x17b/0x278 [<ffffffff813690ad>] ? mld_ifc_timer_expire+0x0/0x288 [<ffffffff81035531>] ? __do_softirq+0x69/0x140 [<ffffffff8103556a>] __do_softirq+0xa2/0x140 [<ffffffff81002e0c>] call_softirq+0x1c/0x28 [<ffffffff81004b54>] do_softirq+0x38/0x80 [<ffffffff81034f06>] irq_exit+0x45/0x47 [<ffffffff810177c3>] smp_apic_timer_interrupt+0x88/0x96 [<ffffffff810028d3>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff810488dd>] ? __atomic_notifier_call_chain+0x0/0x86 [<ffffffff810096bf>] ? mwait_idle+0x6e/0x78 [<ffffffff810096b6>] ? mwait_idle+0x65/0x78 [<ffffffff810011cb>] cpu_idle+0x4d/0x83 [<ffffffff81380b05>] rest_init+0xb9/0xc0 [<ffffffff81380a4c>] ? rest_init+0x0/0xc0 [<ffffffff8168dcf0>] start_kernel+0x392/0x39d [<ffffffff8168d2a3>] x86_64_start_reservations+0xb3/0xb7 [<ffffffff8168d38b>] x86_64_start_kernel+0xe4/0xeb An rcu_dereference() should be an rcu_dereference_bh(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Herbert Xu authored
My recent patch to remove the open-coded checksum sequence in tcp_v6_send_response broke it as we did not set the transport header pointer on the new packet. Actually, there is code there trying to set the transport header properly, but it sets it for the wrong skb ('skb' instead of 'buff'). This bug was introduced by commit a8fdf2b3 ("ipv6: Fix tcp_v6_send_response(): it didn't set skb transport header") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rami Rosen authored
There is no need to export skb_under_panic() and skb_over_panic() in skbuff.c, since these methods are used only in skbuff.c ; this patch removes these two exports. It also marks these functions as 'static' and removeS the extern declarations of them from include/linux/skbuff.h Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Sparse can help us find endianness bugs, but we need to make some cleanups to be able to more easily spot real bugs. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
grec_nsrcs is in network order, we should convert to host horder in br_multicast_igmp3_report() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-