Jiri Olsa says:

====================
Add new helpers to access traced function arguments that
came out of the trampoline batch changes [1].

  Get n-th argument of the traced function:
    long bpf_get_func_arg(void *ctx, u32 n, u64 *value)

  Get return value of the traced function:
    long bpf_get_func_ret(void *ctx, u64 *value)

  Get arguments count of the traced funtion:
    long bpf_get_func_arg_cnt(void *ctx)

v2 changes:
  - added acks
  - updated stack diagram
  - return -EOPNOTSUPP instead of -EINVAL in bpf_get_func_ret
  - removed gpl_only for all helpers
  - added verifier fix to allow proper arguments checks,
    Andrii asked for checking also 'int *b' argument in
    bpf_modify_return_test programs and it turned out that it's currently
    not supported by verifier - we can't read argument that is int pointer,
    so I had to add verifier change to allow that + adding verifier selftest
  - checking all arguments in bpf_modify_return_test test programs
  - moved helpers proto gets in tracing_prog_func_proto with attach type check

thanks,
jirka

[1] https://lore.kernel.org/bpf/20211118112455.475349-1-jolsa@kernel.org/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adding tests for get_func_[arg|ret|arg_cnt] helpers.
Using these helpers in fentry/fexit/fmod_ret programs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-6-jolsa@kernel.org

Adding following helpers for tracing programs:

Get n-th argument of the traced function:
  long bpf_get_func_arg(void *ctx, u32 n, u64 *value)

Get return value of the traced function:
  long bpf_get_func_ret(void *ctx, u64 *value)

Get arguments count of the traced function:
  long bpf_get_func_arg_cnt(void *ctx)

The trampoline now stores number of arguments on ctx-8
address, so it's easy to verify argument index and find
return value argument's position.

Moving function ip address on the trampoline stack behind
the number of functions arguments, so it's now stored on
ctx-16 address if it's needed.

All helpers above are inlined by verifier.

Also bit unrelated small change - using newly added function
bpf_prog_has_trampoline in check_get_func_ip.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-5-jolsa@kernel.org

As suggested by Andrii, adding variables for registers and ip
address offsets, which makes the code more clear, rather than
abusing single stack_size variable for everything.

Also describing the stack layout in the comment.

There is no function change.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-4-jolsa@kernel.org

Adding verifier test for accessing int pointer argument in
tracing programs.

The test program loads 2nd argument of bpf_modify_return_test
function which is int pointer and checks that verifier allows
that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-3-jolsa@kernel.org

Adding support to access arguments with int pointer arguments
in tracing programs.

Currently we allow tracing programs to access only pointers to
string (char pointer), void pointers and pointers to structs.

If we try to access argument which is pointer to int, verifier
will fail to load the program with;

  R1 type=ctx expected=fp
  ; int BPF_PROG(fmod_ret_test, int _a, __u64 _b, int _ret)
  0: (bf) r6 = r1
  ; int BPF_PROG(fmod_ret_test, int _a, __u64 _b, int _ret)
  1: (79) r9 = *(u64 *)(r6 +8)
  func 'bpf_modify_return_test' arg1 type INT is not a struct

There is no harm for the program to access int pointer argument.
We are already doing that for string pointer, which is pointer
to int with 1 byte size.

Changing the is_string_ptr to generic integer check and renaming
it to btf_type_is_int.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-2-jolsa@kernel.org

During linking, type IDs in the resulting linked BPF object file can
change, and so ldimm64 instructions corresponding to
BPF_CORE_TYPE_ID_TARGET and BPF_CORE_TYPE_ID_LOCAL CO-RE relos can get
their imm value out of sync with actual CO-RE relocation information
that's updated by BPF linker properly during linking process.

We could teach BPF linker to adjust such instructions, but it feels
a bit too much for linker to re-implement good chunk of
bpf_core_patch_insns logic just for this. This is a redundant safety
check for TYPE_ID relocations, as the real validation is in matching
CO-RE specs, so if that works fine, it's very unlikely that there is
something wrong with the instruction itself.

So, instead, teach libbpf (and kernel) to ignore insn->imm for
BPF_CORE_TYPE_ID_TARGET and BPF_CORE_TYPE_ID_LOCAL relos.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211213010706.100231-1-andrii@kernel.org

bpf_create_map_xattr() call was reintroduced after merging bpf tree into
bpf-next tree. Convert the last instance into bpf_map_create() call.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211212191341.2529573-1-andrii@kernel.org

Coverity issued the following warning:
6685            cands = bpf_core_add_cands(cands, main_btf, 1);
6686            if (IS_ERR(cands))
>>>     CID 1510300:    (RETURN_LOCAL)
>>>     Returning pointer "cands" which points to local variable "local_cand".
6687                    return cands;

It's a false positive.
Add ERR_CAST() to silence it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Eliminate the follow coccicheck warning:

./kernel/bpf/btf.c:6537:13-20: WARNING opportunity for kmemdup.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1639030882-92383-1-git-send-email-jiapeng.chong@linux.alibaba.com

Hou Tao says:

====================

Hi,

The motivation for introducing bpf_strncmp() helper comes from
two aspects:

(1) clang doesn't always replace strncmp() automatically
In tracing program, sometimes we need to using a home-made
strncmp() to check whether or not the file name is expected.

(2) the performance of home-made strncmp is not so good
As shown in the benchmark in patch #4, the performance of
bpf_strncmp() helper is 18% or 33% better than home-made strncmp()
under x86-64 or arm64 when the compared string length is 64. When
the string length grows to 4095, the performance win will be
179% or 600% under x86-64 or arm64.

Any comments are welcome.
Regards,
Tao

Change Log:
v2:
 * rebased on bpf-next
 * drop patch "selftests/bpf: factor out common helpers for benchmarks"
   (suggested by Andrii)
 * remove unnecessary inline functions and add comments for programs which
   will be rejected by verifier in patch 4 (suggested by Andrii)
 * rename variables used in will-fail programs to clarify the purposes.

v1: https://lore.kernel.org/bpf/20211130142215.1237217-1-houtao1@huawei.com
 * change API to bpf_strncmp(const char *s1, u32 s1_sz, const char *s2)
 * add benchmark refactor and benchmark between bpf_strncmp() and strncmp()

RFC: https://lore.kernel.org/bpf/20211106132822.1396621-1-houtao1@huawei.com/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Four test cases are added:
(1) ensure the return value is expected
(2) ensure no const string size is rejected
(3) ensure writable target is rejected
(4) ensure no null-terminated target is rejected
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-5-houtao1@huawei.com

Add benchmark to compare the performance between home-made strncmp()
in bpf program and bpf_strncmp() helper. In summary, the performance
win of bpf_strncmp() under x86-64 is greater than 18% when the compared
string length is greater than 64, and is 179% when the length is 4095.
Under arm64 the performance win is even bigger: 33% when the length
is greater than 64 and 600% when the length is 4095.

The following is the details:

no-helper-X: use home-made strncmp() to compare X-sized string
helper-Y: use bpf_strncmp() to compare Y-sized string

Under x86-64:

no-helper-1          3.504 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-1             3.347 ± 0.001M/s (drops 0.000 ± 0.000M/s)

no-helper-8          3.357 ± 0.001M/s (drops 0.000 ± 0.000M/s)
helper-8             3.307 ± 0.001M/s (drops 0.000 ± 0.000M/s)

no-helper-32         3.064 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-32            3.253 ± 0.001M/s (drops 0.000 ± 0.000M/s)

no-helper-64         2.563 ± 0.001M/s (drops 0.000 ± 0.000M/s)
helper-64            3.040 ± 0.001M/s (drops 0.000 ± 0.000M/s)

no-helper-128        1.975 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-128           2.641 ± 0.000M/s (drops 0.000 ± 0.000M/s)

no-helper-512        0.759 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-512           1.574 ± 0.000M/s (drops 0.000 ± 0.000M/s)

no-helper-2048       0.329 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-2048          0.602 ± 0.000M/s (drops 0.000 ± 0.000M/s)

no-helper-4095       0.117 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-4095          0.327 ± 0.000M/s (drops 0.000 ± 0.000M/s)

Under arm64:

no-helper-1          2.806 ± 0.004M/s (drops 0.000 ± 0.000M/s)
helper-1             2.819 ± 0.002M/s (drops 0.000 ± 0.000M/s)

no-helper-8          2.797 ± 0.109M/s (drops 0.000 ± 0.000M/s)
helper-8             2.786 ± 0.025M/s (drops 0.000 ± 0.000M/s)

no-helper-32         2.399 ± 0.011M/s (drops 0.000 ± 0.000M/s)
helper-32            2.703 ± 0.002M/s (drops 0.000 ± 0.000M/s)

no-helper-64         2.020 ± 0.015M/s (drops 0.000 ± 0.000M/s)
helper-64            2.702 ± 0.073M/s (drops 0.000 ± 0.000M/s)

no-helper-128        1.604 ± 0.001M/s (drops 0.000 ± 0.000M/s)
helper-128           2.516 ± 0.002M/s (drops 0.000 ± 0.000M/s)

no-helper-512        0.699 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-512           2.106 ± 0.003M/s (drops 0.000 ± 0.000M/s)

no-helper-2048       0.215 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-2048          1.223 ± 0.003M/s (drops 0.000 ± 0.000M/s)

no-helper-4095       0.112 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-4095          0.796 ± 0.000M/s (drops 0.000 ± 0.000M/s)
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-4-houtao1@huawei.com

Fix checkpatch error: "ERROR: Bad function definition - void foo()
should probably be void foo(void)". Most replacements are done by
the following command:

  sed -i 's#\([a-z]\)()$#\1(void)#g' testing/selftests/bpf/benchs/*.c
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-3-houtao1@huawei.com

The helper compares two strings: one string is a null-terminated
read-only string, and another string has const max storage size
but doesn't need to be null-terminated. It can be used to compare
file name in tracing or LSM program.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-2-houtao1@huawei.com

libbpf's obj->nr_programs includes static and global functions. That number
could be higher than the actual number of bpf programs going be loaded by
gen_loader. Passing larger nr_programs to bpf_gen__init() doesn't hurt. Those
exra stack slots will stay as zero. bpf_gen__finish() needs to check that
actual number of progs that gen_loader saw is less than or equal to
obj->nr_programs.

Fixes: ba05fd36 ("libbpf: Perform map fd cleanup for gen_loader in case of error")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Clément Léger says:

====================
Add FDMA support on ocelot switch driver

This series adds support for the Frame DMA present on the VSC7514
switch. The FDMA is able to extract and inject packets on the various
ethernet interfaces present on the switch.
====================

Link: https://lore.kernel.org/r/20211209154911.3152830-1-clement.leger@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ethernet frames can be extracted or injected autonomously to or from
the device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list
data structures in memory are used for injecting or extracting Ethernet
frames. The FDMA generates interrupts when frame extraction or
injection is done and when the linked lists need updating.

The FDMA is shared between all the ethernet ports of the switch and
uses a linked list of descriptors (DCB) to inject and extract packets.
Before adding descriptors, the FDMA channels must be stopped. It would
be inefficient to do that each time a descriptor would be added so the
channels are restarted only once they stopped.

Both channels uses ring-like structure to feed the DCBs to the FDMA.
head and tail are never touched by hardware and are completely handled
by the driver. On top of that, page recycling has been added and is
mostly taken from gianfar driver.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This commit adds support for changing MTU for the ocelot register based
interface. For ocelot, JUMBO frame size can be set up to 25000 bytes
but has been set to 9000 which is a saner value and allows for maximum
gain of performance with FDMA.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In order to support PTP in FDMA, PTP handling code is needed. Since
this is the same as for register-based extraction, export it with
a new ocelot_ptp_rx_timestamp() function.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

FDMA will need this code to prepare the injection frame header when
sending SKBs. Move this code into ocelot_ifh_port_set() and add
conditional IFH setting for vlan and rew op if they are not set.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

M Chetan Kumar says:

====================
net: wwan: iosm: improvements

This patch series brings in IOSM driver improvments.

PATCH1: Set tx queue len.
PATCH2: Release data channel if there is no active IP session.
PATCH3: Removes dead code.
PATCH4: Correct open parenthesis alignment.
====================

Link: https://lore.kernel.org/r/20211209143230.3054755-1-m.chetan.kumar@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix checkpatch warning in iosm_ipc_mmio.c
- Alignment should match open parenthesis
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipc_wwan_tx_flowctrl() is declared in iosm_ipc_wwan.h but is
not defined.

Removed the dead code.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If there is no active IP session (interface up & running) then
release the data channel.

Use nr_sessions variable to track current active IP sessions.
If the count drops to 0, then send pipe close ctrl message to
release the data channel.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Set wwan net dev tx queue len to DEFAULT_TX_QUEUE_LEN.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

commit 32ecd22b ("net: mscc: ocelot: split register definitions to a
separate file") left out an include for <soc/mscc/ocelot_vcap.h>. It was
missed because the only consumer was ocelot_vsc7514.h, which already
included ocelot_vcap.

Fixes: 32ecd22b ("net: mscc: ocelot: split register definitions to a separate file")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211209074010.1813010-1-colin.foster@in-advantage.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The BR-series installation guide from https://driverdownloads.qlogic.com/
mentions the cards support 10Gbase-SR/LR as well as direct attach cables.

The cards only have SFP+ ports, so 10000baseT is not the right mode.
Switch to using more specific link modes added in commit 5711a982
("net: ethtool: add support for 1000BaseX and missing 10G link modes").

Only compile tested.
Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20211208230022.153496-1-erik@kryo.seSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch moves sock_release_ownership() down in include/net/sock.h and
replaces some sk_lock.owned tests with sock_owned_by_user_nocheck().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/r/20211208062158.54132-1-kuniyu@amazon.co.jpSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Andrii Nakryiko says:

====================
bpf-next 2021-12-10 v2

We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).

The main changes are:

1) Various samples fixes, from Alexander Lobakin.

2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.

3) A batch of new unified APIs for libbpf, logging improvements, version
   querying, etc. Also a batch of old deprecations for old APIs and various
   bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.

4) BPF documentation reorganization and improvements, from Christoph Hellwig
   and Dave Tucker.

5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
   libbpf, from Hengqi Chen.

6) Verifier log fixes, from Hou Tao.

7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.

8) Extend branch record capturing to all platforms that support it,
   from Kajol Jain.

9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.

10) bpftool doc-generating script improvements, from Quentin Monnet.

11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.

12) Deprecation warning fix for perf/bpf_counter, from Song Liu.

13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
    from Tiezhu Yang.

14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.

15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
    Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
    and others.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
  libbpf: Add "bool skipped" to struct bpf_map
  libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
  bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
  selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
  selftests/bpf: Add test for libbpf's custom log_buf behavior
  selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
  libbpf: Deprecate bpf_object__load_xattr()
  libbpf: Add per-program log buffer setter and getter
  libbpf: Preserve kernel error code and remove kprobe prog type guessing
  libbpf: Improve logging around BPF program loading
  libbpf: Allow passing user log setting through bpf_object_open_opts
  libbpf: Allow passing preallocated log_buf when loading BTF into kernel
  libbpf: Add OPTS-based bpf_btf_load() API
  libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
  samples/bpf: Remove unneeded variable
  bpf: Remove redundant assignment to pointer t
  selftests/bpf: Fix a compilation warning
  perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
  samples: bpf: Fix 'unknown warning group' build warning on Clang
  samples: bpf: Fix xdp_sample_user.o linking with Clang
  ...
====================

Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix error: "failed to pin map: Bad file descriptor, path:
/sys/fs/bpf/_rodata_str1_1."

In the old kernel, the global data map will not be created, see [0]. So
we should skip the pinning of the global data map to avoid
bpf_object__pin_maps returning error. Therefore, when the map is not
created, we mark “map->skipped" as true and then check during relocation
and during pinning.

Fixes: 16e0c35c ("libbpf: Load global data maps lazily on legacy kernels")
Signed-off-by: Shuyi Cheng <chengshuyi@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

The btf__dedup_deprecated name was misspelled in the definition of the
compat symbol for btf__dedup. This leads it to be missing from the
shared library.

This fixes it.

Fixes: 957d350a ("libbpf: Turn btf_dedup_opts into OPTS-based struct")
Signed-off-by: Vincent Minet <vincent@vincent-minet.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211210063112.80047-1-vincent@vincent-minet.net

Andrii Nakryiko says:

====================

Add new open options and per-program setters to control BTF and program
loading log verboseness and allow providing custom log buffers to capture logs
of interest. Note how custom log_buf and log_level are orthogonal, which
matches previous (alas less customizable) behavior of libbpf, even though it
sort of worked by accident: if someone specified log_level = 1 in
bpf_object__load_xattr(), first attempt to load any BPF program resulted in
wasted bpf() syscall with -EINVAL due to !!log_buf != !!log_level. Then on
retry libbpf would allocated log_buffer and try again, after which prog
loading would succeed and libbpf would print verbose program loading log
through its print callback.

This behavior is now documented and made more efficient, not wasting
unnecessary syscall. But additionally, log_level can be controlled globally on
a per-bpf_object level through bpf_object_open_opts, as well as on
a per-program basis with bpf_program__set_log_buf() and
bpf_program__set_log_level() APIs.

Now that we have a more future-proof way to set log_level, deprecate
bpf_object__load_xattr().

v2->v3:
  - added log_buf selftests for bpf_prog_load() and bpf_btf_load();
  - fix !log_buf in bpf_prog_load (John);
  - fix log_level==0 in bpf_btf_load (thanks selftest!);

v1->v2:
  - fix log_level == 0 handling of bpf_prog_load, add as patch #1 (Alexei);
  - add comments explaining log_buf_size overflow prevention (Alexei).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

Switch all the uses of to-be-deprecated bpf_object__load_xattr() into
a simple bpf_object__load() calls with optional log_level passed through
open_opts.kernel_log_level, if -d option is specified.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-13-andrii@kernel.org

Switch from bpf_object__load_xattr() to bpf_object__load() and
kernel_log_level in bpf_object_open_opts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-12-andrii@kernel.org

Add a selftest that validates that per-program and per-object log_buf
overrides work as expected. Also test same logic for low-level
bpf_prog_load() and bpf_btf_load() APIs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-11-andrii@kernel.org

Switch all selftests uses of to-be-deprecated bpf_load_btf() with
equivalent bpf_btf_load() calls.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-10-andrii@kernel.org

Deprecate non-extensible bpf_object__load_xattr() in v0.8 ([0]).

With log_level control through bpf_object_open_opts or
bpf_program__set_log_level(), we are finally at the point where
bpf_object__load_xattr() doesn't provide any functionality that can't be
accessed through other (better) ways. The other feature,
target_btf_path, is also controllable through bpf_object_open_opts.

  [0] Closes: https://github.com/libbpf/libbpf/issues/289Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-9-andrii@kernel.org

Allow to set user-provided log buffer on a per-program basis ([0]). This
gives great deal of flexibility in terms of which programs are loaded
with logging enabled and where corresponding logs go.

Log buffer set with bpf_program__set_log_buf() overrides kernel_log_buf
and kernel_log_size settings set at bpf_object open time through
bpf_object_open_opts, if any.

Adjust bpf_object_load_prog_instance() logic to not perform own log buf
allocation and load retry if custom log buffer is provided by the user.

  [0] Closes: https://github.com/libbpf/libbpf/issues/418Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-8-andrii@kernel.org

Instead of rewriting error code returned by the kernel of prog load with
libbpf-sepcific variants pass through the original error.

There is now also no need to have a backup generic -LIBBPF_ERRNO__LOAD
fallback error as bpf_prog_load() guarantees that errno will be properly
set no matter what.

Also drop a completely outdated and pretty useless BPF_PROG_TYPE_KPROBE
guess logic. It's not necessary and neither it's helpful in modern BPF
applications.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-7-andrii@kernel.org