The pvrusb2 implementation for VIDIOC_[S|TRY]_FMT was hardcoding
limits on the range for allowed resolution, but it would be much
better if we instead just queried the internal control for these
values.  This then opens the door for the driver to adjust these
limits based on the detected hardware.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Fix a few miscellaneous issues in the pvrusb2 driver related to use of
the new mpeg controls.  This also should fix problems involving
update of the saa7115 / cx25840 configuration as control changes are made.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

A buffer was set just before an if block, and then again in both branches
of the if.  Obvious coding error.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for
Swann PCI TV Tuner Card
Signed-off-by: David Bussenschutt <buzz@oska.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

This patch adds support for Norwood PCI TV Tuner (non-pro)
Signed-off-by: Peter Naulls <peter@chocky.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

This patch adds autodetection support for the AverMedia M150-D
blackbird MPEG encoder / analog video capture card.
This board is known to work with the ASUS PVR 416 configuration.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
only analog is working for now
Signed-off-by: Eric Thomas <ethomas@claranet.fr>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since I don't have such hardware
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

All radio devices use an obsolete mode of opening/release driver.
Since this is not V4L1 core, better to keep the method available for more
time than to rewrite open/release without a radio device to test, since the
newer method is much more complex than the previous one (although providing
support for multiple opens and multiple devices).
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Driver conversion to V4L2 API. 
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Since kernel include autoconf.h via command line, those config.h inclusion
can be removed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

It is just another Lifeview clone
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The change is just an additional PCI ID
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Analog TV, CVBS, S-video and DVB-T are working,
DVB-S not yet
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Ok, here is the working patch for the Freecom DVB-T stick with USB-ID
14aa:0225.
It uses the Firmware-file, wich Erich Focht created and wich can be obtainded
from http://home.arcor.de/efocht/dvb-usb-wt220u-fc03.fw
Also the original patch is from Erich. It adds the proper USB-IDs and I only
had to change the endpoint of the MPEG-2 data-transfer to 0x86.
Signed-off-by: Alexander Tuschen <atuschen@web.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NetLabel]: update docs with website information
  [NetLabel]: rework the Netlink attribute handling (part 2)
  [NetLabel]: rework the Netlink attribute handling (part 1)
  [Netlink]: add nla_validate_nested()
  [NETLINK]: add nla_for_each_nested() to the interface list
  [NetLabel]: change the SELinux permissions
  [NetLabel]: make the CIPSOv4 cache spinlocks bottom half safe
  [NetLabel]: correct improper handling of non-NetLabel peer contexts
  [TCP]: make cubic the default
  [TCP]: default congestion control menu
  [ATM] he: Fix __init/__devinit conflict
  [NETFILTER]: Add dscp,DSCP headers to header-y
  [DCCP]: Introduce dccp_probe
  [DCCP]: Use constants for CCIDs
  [DCCP]: Introduce constants for CCID numbers
  [DCCP]: Allow default/fallback service code.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SOUND] sparc/amd7930: Use __devinit and __devinitdata as needed.
  [SUNLANCE]: Mark sparc_lance_probe_one as __devinit.
  [SPARC64]: Fix section-mismatch errors in solaris emul module.

The v4l2 API documentation for VIDIOC_ENUMSTD says:

	To enumerate all standards applications shall begin at index
	zero, incrementing by one until the driver returns EINVAL.

The actual code, however, tests the index this way:

               if (index<=0 || index >= vfd->tvnormsize) {
                        ret=-EINVAL;

So any application which passes in index=0 gets EINVAL right off the bat
- and, in fact, this is what happens to mplayer.  So I think the
following patch is called for, and maybe even appropriate for a 2.6.18.x
stable release.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Invoking load_module() before param_sysfs_init() is called crashes in
mod_sysfs_setup(), since the kset in module_subsys is not initialized yet.

In my case, net-pf-1 is getting modprobed as a result of hotplug trying to
create a UNIX socket.  Calls to hotplug begin after the topology_init
initcall.

Another patch for the same symptom (module_subsys-initialize-earlier.patch)
moves param_sysfs_init() to the subsys initcalls, but this is still not
early enough in the boot process in some cases.  In particular,
topology_init() causes /sbin/hotplug to run, which requests net-pf-1 (the
UNIX socket protocol) which can be compiled as a module.  Moving
param_sysfs_init() to the postcore initcalls fixes this particular race,
but there might well be other cases where a usermodehelper causes a module
to load earlier still.

The patch makes load_module() return an error rather than crashing the
kernel if invoked before module_subsys is initialized.

Cc: Mark Huang <mlhuang@cs.princeton.edu>
Cc: Greg KH <greg@kroah.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If there is only 1 node in the system cpus should think they are apart of
some other node.

If cases where a real numa system boots the Flat numa option make sure the
cpus don't claim to be apart on a non-existent node.
Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Assume that a cpu is *physically* offlined at boot time...

Because smpboot.c::smp_boot_cpu_map() canoot find cpu's sapicid,
numa.c::build_cpu_to_node_map() cannot build cpu<->node map for
offlined cpu.

For such cpus, cpu_to_node map should be fixed at cpu-hot-add.
This mapping should be done before cpu onlining.

This patch also handles cpu hotremove case.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Problem description:

  We have additional_cpus= option for allocating possible_cpus.  But nid
  for possible cpus are not fixed at boot time.  cpus which is offlined at
  boot or cpus which is not on SRAT is not tied to its node.  This will
  cause panic at cpu onlining.

Usually, pxm_to_nid() mapping is fixed at boot time by SRAT.

But, unfortunately, some system (my system!) do not include
full SRAT table for possible cpus.  (Then, I use
additiona_cpus= option.)

For such possible cpus, pxm<->nid should be fixed at
hot-add.  We now have acpi_map_pxm_to_node() which is also
used at boot.  It's suitable here.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Seems like not all drivers use the framebuffer_alloc() function and won't
have an initialized mutex.  But those don't have a backlight, anyway.
Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Cc: Olaf Hering <olaf@aepfle.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Daniel R Thompson <daniel.thompson@st.com>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Stops panic associated with attempting to free a non slab-allocated
per_cpu_pageset.
Signed-off-by: David Rientjes <rientjes@cs.washington.edu>
Acked-by: Christoph Lameter <clameter@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

With CONFIG_PHYSICAL_START set to a non default values the i386
boot_ioremap code calculated its pte index wrong and users of boot_ioremap
have their areas incorrectly mapped (for me SRAT table not mapped during
early boot).  This patch removes the addr < BOOT_PTE_PTRS constraint.

[ Keith says this is applicable to 2.6.16 and 2.6.17 as well ]

Signed-off-by: Keith Mannthey<kmannth@us.ibm.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: <stable@kernel.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

BUG: warning at kernel/lockdep.c:1816/trace_hardirqs_on() (Not tainted)
 [<c04051ee>] show_trace_log_lvl+0x58/0x171
 [<c0405802>] show_trace+0xd/0x10
 [<c040591b>] dump_stack+0x19/0x1b
 [<c043abee>] trace_hardirqs_on+0xa2/0x11e
 [<c06143c3>] _spin_unlock_irq+0x22/0x26
 [<c0541540>] rtc_get_rtc_time+0x32/0x176
 [<c0419ba4>] hpet_rtc_interrupt+0x92/0x14d
 [<c0450f94>] handle_IRQ_event+0x20/0x4d
 [<c0451055>] __do_IRQ+0x94/0xef
 [<c040678d>] do_IRQ+0x9e/0xbd
 [<c0404a49>] common_interrupt+0x25/0x2c
DWARF2 unwinder stuck at common_interrupt+0x25/0x2c
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>