Pull drm fixes from Dave Airlie:
 "Quiet enough week, though the misc fixes tree didn't get to me when I
  was sending this, so maybe it'll be a bit bigger next week, just one
  i915 fix and some scattered amdgpu fixes:

  amdgpu:
   - Fix mclk and fclk output ordering on some APUs
   - Fix display regression with 5K VRR
   - VCN, JPEG spurious interrupt warning fixes
   - Fix SI DPM on some ARM64 platforms
   - Fix missing TMZ enablement on GC 11.0.1

  i915:
   - Fix for OA reporting to allow detecting non-power-of-two reports"

* tag 'drm-fixes-2023-06-02' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/perf: Clear out entire reports after reading if not power of 2 size
  drm/amdgpu: enable tmz by default for GC 11.0.1
  drm/amd/pm: resolve reboot exception for si oland
  drm/amdgpu: add RAS POISON interrupt funcs for jpeg_v4_0
  drm/amdgpu: add RAS POISON interrupt funcs for jpeg_v2_6
  drm/amdgpu: separate ras irq from jpeg instance irq for UVD_POISON
  drm/amdgpu: add RAS POISON interrupt funcs for vcn_v4_0
  drm/amdgpu: add RAS POISON interrupt funcs for vcn_v2_6
  drm/amdgpu: separate ras irq from vcn instance irq for UVD_POISON
  Revert "drm/amd/display: Do not set drr on pipe commit"
  Revert "drm/amd/display: Block optimize on consecutive FAMS enables"
  drm/amd/pm: reverse mclk and fclk clocks levels for renoir
  drm/amd/pm: reverse mclk and fclk clocks levels for vangogh
  drm/amd/pm: reverse mclk and fclk clocks levels for yellow carp
  drm/amd/pm: reverse mclk clocks levels for SMU v13.0.5
  drm/amd/pm: reverse mclk and fclk clocks levels for SMU v13.0.4

Pull selinux fix from Paul Moore:
 "A small SELinux Makefile fix to resolve a problem seen when building
  the kernel with older versions of make.

  The fix is pretty trivial and effectively reverts a patch that was
  merged during the last merge window"

* tag 'selinux-pr-20230601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: don't use make's grouped targets feature yet

Merge tag 'modules-6.4-rc5-second-pull' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull modules fix from Luis Chamberlain:
 "A zstd fix by lucas as he tested zstd decompression support"

* tag 'modules-6.4-rc5-second-pull' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module/decompress: Fix error checking on zstd decompression

Pull EFI fixes from Ard Biesheuvel:
 "A few minor fixes for EFI, one of which fixes the reported boot
  regression when booting x86 kernels using the BIOS based loader built
  into the hypervisor framework on macOS.

   - fix harmless warning in zboot code on 'make clean'

   - add some missing prototypes

   - fix boot regressions triggered by PE/COFF header image minor
     version bump"

* tag 'efi-fixes-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: Bump stub image version for macOS HVF compatibility
  efi: fix missing prototype warnings
  efi/libstub: zboot: Avoid eager evaluation of objcopy flags

Merge tag 'drm-intel-fixes-2023-06-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix for OA reporting to allow detecting non-power-of-two reports
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZHimf55x/DyXYar1@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-fixes-6.4-2023-05-31' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.4-2023-05-31:

amdgpu:
- Fix mclk and fclk output ordering on some APUs
- Fix display regression with 5K VRR
- VCN, JPEG spurious interrupt warning fixes
- Fix SI DPM on some ARM64 platforms
- Fix missing TMZ enablement on GC 11.0.1
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230601033846.7628-1-alexander.deucher@amd.com

Pull fbdev fixes from Helge Deller:
 "Most notable is a fix for a null-ptr-deref in fbcon's soft_cursor
  function which was found by syzbot.

   - Fix null-ptr-deref in soft_cursor

   - various remove callback conversions

   - error path fixes in imsttfb"

* tag 'fbdev-for-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: bw2: Convert to platform remove callback returning void
  fbdev: broadsheetfb: Convert to platform remove callback returning void
  fbdev: au1200fb: Convert to platform remove callback returning void
  fbdev: au1100fb: Convert to platform remove callback returning void
  fbdev: arcfb: Convert to platform remove callback returning void
  fbdev: au1100fb: Drop if with an always false condition
  fbcon: Fix null-ptr-deref in soft_cursor
  fbdev: imsttfb: Fix error path of imsttfb_probe()
  fbdev: imsttfb: Release framebuffer and dealloc cmap on error path
  fbdev: matroxfb ssd1307fb: Switch i2c drivers back to use .probe()

While implementing support for in-kernel decompression in kmod,
finit_module() was returning a very suspicious value:

	finit_module(3, "", MODULE_INIT_COMPRESSED_FILE) = 18446744072717407296

It turns out the check for module_get_next_page() failing is wrong,
and hence the decompression was not really taking place. Invert
the condition to fix it.

Fixes: 169a58ad ("module/decompress: Support zstd in-kernel decompression")
Cc: stable@kernel.org
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Pull mtd fixes from Miquel Raynal:
 "MTD core:
   - MAINTAINERS: Add Michal as reviewer instead of Naga
   - mtdchar: Mark bits of ioctl handler noinline

  NAND controller drivers:
   - marvell:
       - Don't set the NAND frequency select
       - Ensure timing values are written
   - ingenic: Fix empty stub helper definitions

  SPI-NOR core:
   - Fix divide by zero for spi-nor-generic flashes

  SPI-NOR manufacturer driver:
   - spansion: make sure local struct does not contain garbage"

* tag 'mtd/fixes-for-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: marvell: don't set the NAND frequency select
  mtd: rawnand: marvell: ensure timing values are written
  mtdchar: mark bits of ioctl handler noinline
  MAINTAINERS: Add myself as reviewer instead of Naga
  mtd: spi-nor: Fix divide by zero for spi-nor-generic flashes
  mtd: rawnand: ingenic: fix empty stub helper definitions
  mtd: spi-nor: spansion: make sure local struct does not contain garbage

Pull networking fixes from Jakub Kicinski:
 "Happy Wear a Dress Day.

  Fairly standard-sized batch of fixes, accounting for the lack of
  sub-tree submissions this week. The mlx5 IRQ fixes are notable, people
  were complaining about that. No fires burning.

  Current release - regressions:

   - eth: mlx5e:
      - multiple fixes for dynamic IRQ allocation
      - prevent encap offload when neigh update is running

   - eth: mana: fix perf regression: remove rx_cqes, tx_cqes counters

  Current release - new code bugs:

   - eth: mlx5e: DR, add missing mutex init/destroy in pattern manager

  Previous releases - always broken:

   - tcp: deny tcp_disconnect() when threads are waiting

   - sched: prevent ingress Qdiscs from getting installed in random
     locations in the hierarchy and moving around

   - sched: flower: fix possible OOB write in fl_set_geneve_opt()

   - netlink: fix NETLINK_LIST_MEMBERSHIPS length report

   - udp6: fix race condition in udp6_sendmsg & connect

   - tcp: fix mishandling when the sack compression is deferred

   - rtnetlink: validate link attributes set at creation time

   - mptcp: fix connect timeout handling

   - eth: stmmac: fix call trace when stmmac_xdp_xmit() is invoked

   - eth: amd-xgbe: fix the false linkup in xgbe_phy_status

   - eth: mlx5e:
      - fix corner cases in internal buffer configuration
      - drain health before unregistering devlink

   - usb: qmi_wwan: set DTR quirk for BroadMobi BM818

  Misc:

   - tcp: return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if
     user_mss set"

* tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
  mptcp: fix active subflow finalization
  mptcp: add annotations around sk->sk_shutdown accesses
  mptcp: fix data race around msk->first access
  mptcp: consolidate passive msk socket initialization
  mptcp: add annotations around msk->subflow accesses
  mptcp: fix connect timeout handling
  rtnetlink: add the missing IFLA_GRO_ tb check in validate_linkmsg
  rtnetlink: move IFLA_GSO_ tb check to validate_linkmsg
  rtnetlink: call validate_linkmsg in rtnl_create_link
  ice: recycle/free all of the fragments from multi-buffer frame
  net: phy: mxl-gpy: extend interrupt fix to all impacted variants
  net: renesas: rswitch: Fix return value in error path of xmit
  net: dsa: mv88e6xxx: Increase wait after reset deactivation
  net: ipa: Use correct value for IPA_STATUS_SIZE
  tcp: fix mishandling when the sack compression is deferred.
  net/sched: flower: fix possible OOB write in fl_set_geneve_opt()
  sfc: fix error unwinds in TC offload
  net/mlx5: Read embedded cpu after init bit cleared
  net/mlx5e: Fix error handling in mlx5e_refresh_tirs
  net/mlx5: Ensure af_desc.mask is properly initialized
  ...

When switching from kthreads to vhost_tasks two bugs were added:
1. The vhost worker tasks's now show up as processes so scripts doing
ps or ps a would not incorrectly detect the vhost task as another
process.  2. kthreads disabled freeze by setting PF_NOFREEZE, but
vhost tasks's didn't disable or add support for them.

To fix both bugs, this switches the vhost task to be thread in the
process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call
get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that
SIGKILL/STOP support is required because CLONE_THREAD requires
CLONE_SIGHAND which requires those 2 signals to be supported.

This is a modified version of the patch written by Mike Christie
<michael.christie@oracle.com> which was a modified version of patch
originally written by Linus.

Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER.
Including ignoring signals, setting up the register state, and having
get_signal return instead of calling do_group_exit.

Tidied up the vhost_task abstraction so that the definition of
vhost_task only needs to be visible inside of vhost_task.c.  Making
it easier to review the code and tell what needs to be done where.
As part of this the main loop has been moved from vhost_worker into
vhost_task_fn.  vhost_worker now returns true if work was done.

The main loop has been updated to call get_signal which handles
SIGSTOP, freezing, and collects the message that tells the thread to
exit as part of process exit.  This collection clears
__fatal_signal_pending.  This collection is not guaranteed to
clear signal_pending() so clear that explicitly so the schedule()
sleeps.

For now the vhost thread continues to exist and run work until the
last file descriptor is closed and the release function is called as
part of freeing struct file.  To avoid hangs in the coredump
rendezvous and when killing threads in a multi-threaded exec.  The
coredump code and de_thread have been modified to ignore vhost threads.

Remvoing the special case for exec appears to require teaching
vhost_dev_flush how to directly complete transactions in case
the vhost thread is no longer running.

Removing the special case for coredump rendezvous requires either the
above fix needed for exec or moving the coredump rendezvous into
get_signal.

Fixes: 6e890c5d ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Co-developed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Linux Kernel currently only requires make v3.82 while the grouped
target functionality requires make v4.3.  Removed the grouped target
introduced in 4ce1f694 ("selinux: ensure av_permissions.h is
built when needed") as well as the multiple header file targets in
the make rule.  This effectively reverts the problem commit.

We will revisit this change when make >= 4.3 is required by the rest
of the kernel.

Cc: stable@vger.kernel.org
Fixes: 4ce1f694 ("selinux: ensure av_permissions.h is built when needed")
Reported-by: Erwan Velu <e.velu@criteo.com>
Reported-by: Luiz Capitulino <luizcap@amazon.com>
Tested-by: Luiz Capitulino <luizcap@amazon.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Saeed Mahameed says:

====================
mlx5 fixes 2023-05-31

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Read embedded cpu after init bit cleared
  net/mlx5e: Fix error handling in mlx5e_refresh_tirs
  net/mlx5: Ensure af_desc.mask is properly initialized
  net/mlx5: Fix setting of irq->map.index for static IRQ case
  net/mlx5: Remove rmap also in case dynamic MSIX not supported
====================

Link: https://lore.kernel.org/r/20230601031051.131529-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: Fixes for connect timeout, access annotations, and subflow init

Patch 1 allows the SO_SNDTIMEO sockopt to correctly change the connect
timeout on MPTCP sockets.

Patches 2-5 add READ_ONCE()/WRITE_ONCE() annotations to fix KCSAN issues.

Patch 6 correctly initializes some subflow fields on outgoing connections.
====================

Link: https://lore.kernel.org/r/20230531-send-net-20230531-v1-0-47750c420571@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Active subflow are inserted into the connection list at creation time.
When the MPJ handshake completes successfully, a new subflow creation
netlink event is generated correctly, but the current code wrongly
avoid initializing a couple of subflow data.

The above will cause misbehavior on a few exceptional events: unneeded
mptcp-level retransmission on msk-level sequence wrap-around and infinite
mapping fallback even when a MPJ socket is present.

Address the issue factoring out the needed initialization in a new helper
and invoking the latter from __mptcp_finish_join() time for passive
subflow and from mptcp_finish_join() for active ones.

Fixes: 0530020a ("mptcp: track and update contiguous data status")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Christoph reported the mptcp variant of a recently addressed plain
TCP issue. Similar to commit e14cadfd ("tcp: add annotations around
sk->sk_shutdown accesses") add READ/WRITE ONCE annotations to silence
KCSAN reports around lockless sk_shutdown access.

Fixes: 71ba088c ("mptcp: cleanup accept and poll")
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/401Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The first subflow socket is accessed outside the msk socket lock
by mptcp_subflow_fail(), we need to annotate each write access
with WRITE_ONCE, but a few spots still lacks it.

Fixes: 76a13b31 ("mptcp: invoke MP_FAIL response when needed")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When the msk socket is cloned at MPC handshake time, a few
fields are initialized in a racy way outside mptcp_sk_clone()
and the msk socket lock.

The above is due historical reasons: before commit a88d0092
("mptcp: simplify subflow_syn_recv_sock()") as the first subflow socket
carrying all the needed date was not available yet at msk creation
time

We can now refactor the code moving the missing initialization bit
under the socket lock, removing the init race and avoiding some
code duplication.

This will also simplify the next patch, as all msk->first write
access are now under the msk socket lock.

Fixes: 0397c6d8 ("mptcp: keep unaccepted MPC subflow into join list")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The MPTCP can access the first subflow socket in a few spots
outside the socket lock scope. That is actually safe, as MPTCP
will delete the socket itself only after the msk sock close().

Still the such accesses causes a few KCSAN splats, as reported
by Christoph. Silence the harmless warning adding a few annotation
around the relevant accesses.

Fixes: 71ba088c ("mptcp: cleanup accept and poll")
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/402Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ondrej reported a functional issue WRT timeout handling on connect
with a nice reproducer.

The problem is that the current mptcp connect waits for both the
MPTCP socket level timeout, and the first subflow socket timeout.
The latter is not influenced/touched by the exposed setsockopt().

Overall the above makes the SO_SNDTIMEO a no-op on connect.

Since mptcp_connect is invoked via inet_stream_connect and the
latter properly handle the MPTCP level timeout, we can address the
issue making the nested subflow level connect always unblocking.

This also allow simplifying a bit the code, dropping an ugly hack
to handle the fastopen and custom proto_ops connect.

The issues predates the blamed commit below, but the current resolution
requires the infrastructure introduced there.

Fixes: 54f1944e ("mptcp: factor out mptcp_connect()")
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/399
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Xin Long says:

====================
rtnetlink: a couple of fixes in linkmsg validation

validate_linkmsg() was introduced to do linkmsg validation for existing
links. However, the new created links also need this linkmsg validation.

Add validate_linkmsg() check for link creating in Patch 1, and add more
tb checks into validate_linkmsg() in Patch 2 and 3.
====================

Link: https://lore.kernel.org/r/cover.1685548598.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This fixes the issue that dev gro_max_size and gso_ipv4_max_size
can be set to a huge value:

  # ip link add dummy1 type dummy
  # ip link set dummy1 gro_max_size 4294967295
  # ip -d link show dummy1
    dummy addrgenmode eui64 ... gro_max_size 4294967295

Fixes: 0fe79f28 ("net: allow gro_max_size to exceed 65536")
Fixes: 9eefedd5 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

These IFLA_GSO_* tb check should also be done for the new created link,
otherwise, they can be set to a huge value when creating links:

  # ip link add dummy1 gso_max_size 4294967295 type dummy
  # ip -d link show dummy1
    dummy addrgenmode eui64 ... gso_max_size 4294967295

Fixes: 46e6b992 ("rtnetlink: allow GSO maximums to be set on device creation")
Fixes: 9eefedd5 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

validate_linkmsg() was introduced by commit 1840bb13 ("[RTNL]:
Validate hardware and broadcast address attribute for RTM_NEWLINK")
to validate tb[IFLA_ADDRESS/BROADCAST] for existing links. The same
check should also be done for newly created links.

This patch adds validate_linkmsg() call in rtnl_create_link(), to
avoid the invalid address set when creating some devices like:

  # ip link add dummy0 type dummy
  # ip link add link dummy0 name mac0 address 01:02 type macsec

Fixes: 0e06877c ("[RTNETLINK]: rtnl_link: allow specifying initial device address")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The ice driver caches next_to_clean value at the beginning of
ice_clean_rx_irq() in order to remember the first buffer that has to be
freed/recycled after main Rx processing loop. The end boundary is
indicated by first descriptor of frame that Rx processing loop has ended
its duties. Note that if mentioned loop ended in the middle of gathering
multi-buffer frame, next_to_clean would be pointing to the descriptor in
the middle of the frame BUT freeing/recycling stage will stop at the
first descriptor. This means that next iteration of ice_clean_rx_irq()
will miss the (first_desc, next_to_clean - 1) entries.

 When running various 9K MTU workloads, such splats were observed:

[  540.780716] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  540.787787] #PF: supervisor read access in kernel mode
[  540.793002] #PF: error_code(0x0000) - not-present page
[  540.798218] PGD 0 P4D 0
[  540.800801] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  540.805231] CPU: 18 PID: 3984 Comm: xskxceiver Tainted: G        W          6.3.0-rc7+ #96
[  540.813619] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[  540.824209] RIP: 0010:ice_clean_rx_irq+0x2b6/0xf00 [ice]
[  540.829678] Code: 74 24 10 e9 aa 00 00 00 8b 55 78 41 31 57 10 41 09 c4 4d 85 ff 0f 84 83 00 00 00 49 8b 57 08 41 8b 4f 1c 65 8b 35 1a fa 4b 3f <48> 8b 02 48 c1 e8 3a 39 c6 0f 85 a2 00 00 00 f6 42 08 02 0f 85 98
[  540.848717] RSP: 0018:ffffc9000f42fc50 EFLAGS: 00010282
[  540.854029] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 000000000000fffe
[  540.861272] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff
[  540.868519] RBP: ffff88984a05ac00 R08: 0000000000000000 R09: dead000000000100
[  540.875760] R10: ffff88983fffcd00 R11: 000000000010f2b8 R12: 0000000000000004
[  540.883008] R13: 0000000000000003 R14: 0000000000000800 R15: ffff889847a10040
[  540.890253] FS:  00007f6ddf7fe640(0000) GS:ffff88afdf800000(0000) knlGS:0000000000000000
[  540.898465] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  540.904299] CR2: 0000000000000000 CR3: 000000010d3da001 CR4: 00000000007706e0
[  540.911542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  540.918789] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  540.926032] PKRU: 55555554
[  540.928790] Call Trace:
[  540.931276]  <TASK>
[  540.933418]  ice_napi_poll+0x4ca/0x6d0 [ice]
[  540.937804]  ? __pfx_ice_napi_poll+0x10/0x10 [ice]
[  540.942716]  napi_busy_loop+0xd7/0x320
[  540.946537]  xsk_recvmsg+0x143/0x170
[  540.950178]  sock_recvmsg+0x99/0xa0
[  540.953729]  __sys_recvfrom+0xa8/0x120
[  540.957543]  ? do_futex+0xbd/0x1d0
[  540.961008]  ? __x64_sys_futex+0x73/0x1d0
[  540.965083]  __x64_sys_recvfrom+0x20/0x30
[  540.969155]  do_syscall_64+0x38/0x90
[  540.972796]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[  540.977934] RIP: 0033:0x7f6de5f27934

To fix this, set cached_ntc to first_desc so that at the end, when
freeing/recycling buffers, descriptors from first to ntc are not missed.

Fixes: 2fba7dc5 ("ice: Add support for XDP multi-buffer on Rx side")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230531154457.3216621-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The interrupt fix in commit 97a89ed1 should be applied on all variants
of GPY2xx PHY and GPY115C.

Fixes: 97a89ed1 ("net: phy: mxl-gpy: disable interrupts on GPY215 by default")
Signed-off-by: Xu Liang <lxu@maxlinear.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230531074822.39136-1-lxu@maxlinear.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix return value in the error path of rswitch_start_xmit(). If TX
queues are full, this function should return NETDEV_TX_BUSY.

Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20230529073817.1145208-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

marvell_nfc_setup_interface() uses the frequency retrieved from the
clock associated with the nand interface to determine the timings that
will be used. By changing the NAND frequency select without reflecting
this in the clock configuration this means that the timings calculated
don't correctly meet the requirements of the NAND chip. This hasn't been
an issue up to now because of a different bug that was stopping the
timings being updated after they were initially set.

Fixes: b2525141 ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230525003154.2303012-2-chris.packham@alliedtelesis.co.nz

When new timing values are calculated in marvell_nfc_setup_interface()
ensure that they will be applied in marvell_nfc_select_target() by
clearing the selected_chip pointer.

Fixes: b2525141 ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230525003154.2303012-1-chris.packham@alliedtelesis.co.nz

The addition of the mtdchar_read_ioctl() function caused the stack usage
of mtdchar_ioctl() to grow beyond the warning limit on 32-bit architectures
with gcc-13:

drivers/mtd/mtdchar.c: In function 'mtdchar_ioctl':
drivers/mtd/mtdchar.c:1229:1: error: the frame size of 1488 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Mark both the read and write portions as noinline_for_stack to ensure
they don't get inlined and use separate stack slots to reduce the
maximum usage, both in the mtdchar_ioctl() and combined with any
of its callees.

Fixes: 095bb6e4 ("mtdchar: add MEMREAD ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230417205654.1982368-1-arnd@kernel.org

Naga no longer works for AMD/Xilinx and there is no activity from him to
continue to maintain Xilinx related drivers. Add myself instead to be kept
in loop if there is any need for testing.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[<miquel.raynal@bootlin.com>: Manually apply on top of the latest -rc which
                              where the MAINTAINERS file got sorted]
Link: https://lore.kernel.org/linux-mtd/06df49c300c53a27423260e99acc217b06d4e588.1684827820.git.michal.simek@amd.com

Merge tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fix from Takashi Sakamoto:
 "A single patch to use a flexible array rather than a zero-length one"

* tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: Replace zero-length array with flexible-array member

Pull mailbox fix from Jassi Brar:
 "Fix missing mutex unlock in mailbox-test"

* tag 'mailbox-fixes-6.4-rc5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: mailbox-test: fix a locking issue in mbox_test_message_write()

A switch held in reset by default needs to wait longer until we can
reliably detect it.

An issue was observed when testing on the Marvell 88E6393X (Link Street).
The driver failed to detect the switch on some upstarts. Increasing the
wait time after reset deactivation solves this issue.

The updated wait time is now also the same as the wait time in the
mv88e6xxx_hardware_reset function.

Fixes: 7b75e49d ("net: dsa: mv88e6xxx: wait after reset deactivation")
Signed-off-by: Andreas Svensson <andreas.svensson@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Zero-length and one-element arrays are deprecated, and we are moving
towards adopting C99 flexible-array members, instead.

Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
sound/firewire/amdtp-stream.c: In function ‘build_it_pkt_header’:
sound/firewire/amdtp-stream.c:694:17: warning: ‘generate_cip_header’ accessing 8 bytes in a region of size 0 [-Wstringop-overflow=]
  694 |                 generate_cip_header(s, cip_header, data_block_counter, syt);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/firewire/amdtp-stream.c:694:17: note: referencing argument 2 of type ‘__be32[2]’ {aka ‘unsigned int[2]’}
sound/firewire/amdtp-stream.c:667:13: note: in a call to function ‘generate_cip_header’
  667 | static void generate_cip_header(struct amdtp_stream *s, __be32 cip_header[2],
      |             ^~~~~~~~~~~~~~~~~~~

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/303
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZHT0V3SpvHyxCv5W@workSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

Pull HID fixes from Jiri Kosina:

 - Regression fix for overlong long timeouts during initialization on
   some Logitech Unifying devices (Bastien Nocera)

 - error handling and overflow fixes for Wacom driver (Denis Arefev,
   Jason Gerecke, Nikita Zhandarovich)

* tag 'for-linus-2023060101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: Handle timeout differently from busy
  HID: wacom: Add error check to wacom_parse_and_register()
  HID: google: add jewel USB id
  HID: wacom: avoid integer overflow in wacom_intuos_inout()
  HID: wacom: Check for string overflow from strscpy calls

Pull ata fix from Damien Le Moal:

 - Fix ata_find_dev() use of the device number to find a struct
   ata_device for a port. This addresses issues with some passthrough
   commands with libsas managed devices.

* tag 'ata-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-scsi: Use correct device no in ata_find_dev()

Pull smb server fixes from Steve French:
 "Eight server fixes (most also for stable):

   - Two fixes for uninitialized pointer reads (rename and link)

   - Fix potential UAF in oplock break

   - Two fixes for potential out of bound reads in negotiate

   - Fix crediting bug

   - Two fixes for xfstests (allocation size fix for test 694 and lookup
     issue shown by test 464)"

* tag '6.4-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: call putname after using the last component
  ksmbd: fix incorrect AllocationSize set in smb2_get_info
  ksmbd: fix UAF issue from opinfo->conn
  ksmbd: fix multiple out-of-bounds read during context decoding
  ksmbd: fix slab-out-of-bounds read in smb2_handle_negotiate
  ksmbd: fix credit count leakage
  ksmbd: fix uninitialized pointer read in smb2_create_link()
  ksmbd: fix uninitialized pointer read in ksmbd_vfs_rename()

IPA_STATUS_SIZE was introduced in commit b8dc7d0e as a replacement
for the size of the removed struct ipa_status which had size
sizeof(__le32[8]). Use this value as IPA_STATUS_SIZE.

Fixes: b8dc7d0e ("net: ipa: stop using sizeof(status)")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230531103618.102608-1-spasswolf@web.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In this patch, we mainly try to handle sending a compressed ack
correctly if it's deferred.

Here are more details in the old logic:
When sack compression is triggered in the tcp_compressed_ack_kick(),
if the sock is owned by user, it will set TCP_DELACK_TIMER_DEFERRED
and then defer to the release cb phrase. Later once user releases
the sock, tcp_delack_timer_handler() should send a ack as expected,
which, however, cannot happen due to lack of ICSK_ACK_TIMER flag.
Therefore, the receiver would not sent an ack until the sender's
retransmission timeout. It definitely increases unnecessary latency.

Fixes: 5d9f4262 ("tcp: add SACK compression")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: fuyuanli <fuyuanli@didiglobal.com>
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/netdev/20230529113804.GA20300@didi-ThinkCentre-M920t-N000/Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230531080150.GA20424@didi-ThinkCentre-M920t-N000Signed-off-by: Paolo Abeni <pabeni@redhat.com>