Skip to content

L
linux
Switch branch/tag
  1. 28 Mar, 2023 15 commits
  3. 27 Mar, 2023 11 commits
    • Ivan Orlov's avatar
      can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write · 2b4c99f7
      Ivan Orlov authored 
      Syzkaller reported the following issue:

=====================================================
BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline]
BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600
 aio_rw_done fs/aio.c:1520 [inline]
 aio_write+0x899/0x950 fs/aio.c:1600
 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
 __do_sys_io_submit fs/aio.c:2078 [inline]
 __se_sys_io_submit+0x293/0x770 fs/aio.c:2048
 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:766 [inline]
 slab_alloc_node mm/slub.c:3452 [inline]
 __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
 __do_kmalloc_node mm/slab_common.c:967 [inline]
 __kmalloc+0x11d/0x3b0 mm/slab_common.c:981
 kmalloc_array include/linux/slab.h:636 [inline]
 bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930
 bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg net/socket.c:734 [inline]
 sock_write_iter+0x495/0x5e0 net/socket.c:1108
 call_write_iter include/linux/fs.h:2189 [inline]
 aio_write+0x63a/0x950 fs/aio.c:1600
 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
 __do_sys_io_submit fs/aio.c:2078 [inline]
 __se_sys_io_submit+0x293/0x770 fs/aio.c:2048
 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
=====================================================

We can follow the call chain and find that 'bcm_tx_setup' function
calls 'memcpy_from_msg' to copy some content to the newly allocated
frame of 'op->frames'. After that the 'len' field of copied structure
being compared with some constant value (64 or 8). However, if
'memcpy_from_msg' returns an error, we will compare some uninitialized
memory. This triggers 'uninit-value' issue.

This patch will add 'memcpy_from_msg' possible errors processing to
avoid uninit-value issue.

Tested via syzkaller

Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089Signed-off-by: default avatarIvan Orlov <ivan.orlov0322@gmail.com>
Fixes: 6f3b911d ("can: bcm: add support for CAN FD frames")
Acked-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230314120445.12407-1-ivan.orlov0322@gmail.comSigned-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      2b4c99f7
    • Vladimir Oltean's avatar
      net: stmmac: don't reject VLANs when IFF_PROMISC is set · a7602e73
      Vladimir Oltean authored 
      The blamed commit has introduced the following tests to
dwmac4_add_hw_vlan_rx_fltr(), called from stmmac_vlan_rx_add_vid():

	if (hw->promisc) {
		netdev_err(dev,
			   "Adding VLAN in promisc mode not supported\n");
		return -EPERM;
	}

"VLAN promiscuous" mode is keyed in this driver to IFF_PROMISC, and so,
vlan_vid_add() and vlan_vid_del() calls cannot take place in IFF_PROMISC
mode. I have the following 2 arguments that this restriction is.... hm,
how shall I put it nicely... unproductive :)

First, take the case of a Linux bridge. If the kernel is compiled with
CONFIG_BRIDGE_VLAN_FILTERING=y, then this bridge shall have a VLAN
database. The bridge shall try to call vlan_add_vid() on its bridge
ports for each VLAN in the VLAN table. It will do this irrespectively of
whether that port is *currently* VLAN-aware or not. So it will do this
even when the bridge was created with vlan_filtering 0.
But the Linux bridge, in VLAN-unaware mode, configures its ports in
promiscuous (IFF_PROMISC) mode, so that they accept packets with any
MAC DA (a switch must do this in order to forward those packets which
are not directly targeted to its MAC address).

As a result, the stmmac driver does not work as a bridge port, when the
kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y.

$ ip link add br0 type bridge && ip link set br0 up
$ ip link set eth0 master br0 && ip link set eth0 up
[ 2333.943296] br0: port 1(eth0) entered blocking state
[ 2333.943381] br0: port 1(eth0) entered disabled state
[ 2333.943782] device eth0 entered promiscuous mode
[ 2333.944080] 4033c000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 2333.976509] 4033c000.ethernet eth0: failed to initialize vlan filtering on this port
RTNETLINK answers: Operation not permitted

Secondly, take the case of stmmac as DSA master. Some switch tagging
protocols are based on 802.1Q VLANs (tag_sja1105.c), and as such,
tag_8021q.c uses vlan_vid_add() to work with VLAN-filtering DSA masters.
But also, when a DSA port becomes promiscuous (for example when it joins
a bridge), the DSA framework also makes the DSA master promiscuous.

Moreover, for every VLAN that a DSA switch sends to the CPU, DSA also
programs a VLAN filter on the DSA master, because if the the DSA switch
uses a tail tag, then the hardware frame parser of the DSA master will
see VLAN as VLAN, and might filter them out, for being unknown.

Due to the above 2 reasons, my belief is that the stmmac driver does not
get to choose to not accept vlan_vid_add() calls while IFF_PROMISC is
enabled, because the 2 are completely independent and there are code
paths in the network stack which directly lead to this situation
occurring, without the user's direct input.

In fact, my belief is that "VLAN promiscuous" mode should have never
been keyed on IFF_PROMISC in the first place, but rather, on the
NETIF_F_HW_VLAN_CTAG_FILTER feature flag which can be toggled by the
user through ethtool -k, when present in netdev->hw_features.

In the stmmac driver, NETIF_F_HW_VLAN_CTAG_FILTER is only present in
"features", making this feature "on [fixed]".

I have this belief because I am unaware of any definition of promiscuity
which implies having an effect on anything other than MAC DA (therefore
not VLAN). However, I seem to be rather alone in having this opinion,
looking back at the disagreements from this discussion:
https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/

In any case, to remove the vlan_vid_add() dependency on !IFF_PROMISC,
one would need to remove the check and see what fails. I guess the test
was there because of the way in which dwmac4_vlan_promisc_enable() is
implemented.

For context, the dwmac4 supports Perfect Filtering for a limited number
of VLANs - dwmac4_get_num_vlan(), priv->hw->num_vlan, with a fallback on
Hash Filtering - priv->dma_cap.vlhash - see stmmac_vlan_update(), also
visible in cat /sys/kernel/debug/stmmaceth/eth0/dma_cap | grep 'VLAN
Hash Filtering'.

The perfect filtering is based on MAC_VLAN_Tag_Filter/MAC_VLAN_Tag_Data
registers, accessed in the driver through dwmac4_write_vlan_filter().

The hash filtering is based on the MAC_VLAN_Hash_Table register, named
GMAC_VLAN_HASH_TABLE in the driver and accessed by dwmac4_update_vlan_hash().
The control bit for enabling hash filtering is GMAC_VLAN_VTHM
(MAC_VLAN_Tag_Ctrl bit VTHM: VLAN Tag Hash Table Match Enable).

Now, the description of dwmac4_vlan_promisc_enable() is that it iterates
through the driver's cache of perfect filter entries (hw->vlan_filter[i],
added by dwmac4_add_hw_vlan_rx_fltr()), and evicts them from hardware by
unsetting their GMAC_VLAN_TAG_DATA_VEN (MAC_VLAN_Tag_Data bit VEN - VLAN
Tag Enable) bit. Then it unsets the GMAC_VLAN_VTHM bit, which disables
hash matching.

This leaves the MAC, according to table "VLAN Match Status" from the
documentation, to always enter these data paths:

VID    |VLAN Perfect Filter |VTHM Bit |VLAN Hash Filter |Final VLAN Match
       |Match Result        |         |Match Result     |Status
-------|--------------------|---------|-----------------|----------------
VID!=0 |Fail                |0        |don't care       |Pass

So, dwmac4_vlan_promisc_enable() does its job, but by unsetting
GMAC_VLAN_VTHM, it conflicts with the other code path which controls
this bit: dwmac4_update_vlan_hash(), called through stmmac_update_vlan_hash()
from stmmac_vlan_rx_add_vid() and from stmmac_vlan_rx_kill_vid().
This is, I guess, why dwmac4_add_hw_vlan_rx_fltr() is not allowed to run
after dwmac4_vlan_promisc_enable() has unset GMAC_VLAN_VTHM: because if
it did, then dwmac4_update_vlan_hash() would set GMAC_VLAN_VTHM again,
breaking the "VLAN promiscuity".

It turns out that dwmac4_vlan_promisc_enable() is way too complicated
for what needs to be done. The MAC_Packet_Filter register also has the
VTFE bit (VLAN Tag Filter Enable), which simply controls whether VLAN
tagged packets which don't match the filtering tables (either perfect or
hash) are dropped or not. At the moment, this driver unconditionally
sets GMAC_PACKET_FILTER_VTFE if NETIF_F_HW_VLAN_CTAG_FILTER was detected
through the priv->dma_cap.vlhash capability bits of the device, in
stmmac_dvr_probe().

I would suggest deleting the unnecessarily complex logic from
dwmac4_vlan_promisc_enable(), and simply unsetting GMAC_PACKET_FILTER_VTFE
when becoming IFF_PROMISC, which has the same effect of allowing packets
with any VLAN tags, but has the additional benefit of being able to run
concurrently with stmmac_vlan_rx_add_vid() and stmmac_vlan_rx_kill_vid().

As much as I believe that the VTFE bit should have been exclusively
controlled by NETIF_F_HW_VLAN_CTAG_FILTER through ethtool, and not by
IFF_PROMISC, changing that is not a punctual fix to the problem, and it
would probably break the VFFQ feature added by the later commit
e0f9956a ("net: stmmac: Add option for VLAN filter fail queue
enable"). From the commit description, VFFQ needs IFF_PROMISC=on and
VTFE=off in order to work (and this change respects that). But if VTFE
was changed to be controlled through ethtool -k, then a user-visible
change would have been introduced in Intel's scripts (a need to run
"ethtool -k eth0 rx-vlan-filter off" which did not exist before).

The patch was tested with this set of commands:

  ip link set eth0 up
  ip link add link eth0 name eth0.100 type vlan id 100
  ip addr add 192.168.100.2/24 dev eth0.100 && ip link set eth0.100 up
  ip link set eth0 promisc on
  ip link add link eth0 name eth0.101 type vlan id 101
  ip addr add 192.168.101.2/24 dev eth0.101 && ip link set eth0.101 up
  ip link set eth0 promisc off
  ping -c 5 192.168.100.1
  ping -c 5 192.168.101.1
  ip link set eth0 promisc on
  ping -c 5 192.168.100.1
  ping -c 5 192.168.101.1
  ip link del eth0.100
  ip link del eth0.101
  # Wait for VLAN-tagged pings from the other end...
  # Check with "tcpdump -i eth0 -e -n -p" and we should see them
  ip link set eth0 promisc off
  # Wait for VLAN-tagged pings from the other end...
  # Check with "tcpdump -i eth0 -e -n -p" and we shouldn't see them
  # anymore, but remove the "-p" argument from tcpdump and they're there.

Fixes: c89f44ff ("net: stmmac: Add support for VLAN promiscuous mode")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a7602e73
    • Oleksij Rempel's avatar
      can: j1939: prevent deadlock by moving j1939_sk_errqueue() · d1366b28
      Oleksij Rempel authored 
      This commit addresses a deadlock situation that can occur in certain
scenarios, such as when running data TP/ETP transfer and subscribing to
the error queue while receiving a net down event. The deadlock involves
locks in the following order:

3
  j1939_session_list_lock ->  active_session_list_lock
  j1939_session_activate
  ...
  j1939_sk_queue_activate_next -> sk_session_queue_lock
  ...
  j1939_xtp_rx_eoma_one

2
  j1939_sk_queue_drop_all  ->  sk_session_queue_lock
  ...
  j1939_sk_netdev_event_netdown -> j1939_socks_lock
  j1939_netdev_notify

1
  j1939_sk_errqueue -> j1939_socks_lock
  __j1939_session_cancel -> active_session_list_lock
  j1939_tp_rxtimer

       CPU0                    CPU1
       ----                    ----
  lock(&priv->active_session_list_lock);
                               lock(&jsk->sk_session_queue_lock);
                               lock(&priv->active_session_list_lock);
  lock(&priv->j1939_socks_lock);

The solution implemented in this commit is to move the
j1939_sk_errqueue() call out of the active_session_list_lock context,
thus preventing the deadlock situation.

Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com
Fixes: 5b9272e9 ("can: j1939: extend UAPI to notify about RX status")
Co-developed-by: default avatarHillf Danton <hdanton@sina.com>
Signed-off-by: default avatarHillf Danton <hdanton@sina.com>
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20230324130141.2132787-1-o.rempel@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      d1366b28
    • Álvaro Fernández Rojas's avatar
      net: dsa: b53: mmap: add phy ops · 45977e58
      Álvaro Fernández Rojas authored 
      Implement phy_read16() and phy_write16() ops for B53 MMAP to avoid accessing
B53_PORT_MII_PAGE registers which hangs the device.
This access should be done through the MDIO Mux bus controller.
Signed-off-by: default avatarÁlvaro Fernández Rojas <noltari@gmail.com>
Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      45977e58
    • Oleksij Rempel's avatar
      net: phy: micrel: correct KSZ9131RNX EEE capabilities and advertisement · f2e9d083
      Oleksij Rempel authored 
      The KSZ9131RNX incorrectly shows EEE capabilities in its registers.
Although the "EEE control and capability 1" (Register 3.20) is set to 0,
indicating no EEE support, the "EEE advertisement 1" (Register 7.60) is
set to 0x6, advertising EEE support for 1000BaseT/Full and
100BaseT/Full.
This inconsistency causes PHYlib to assume there is no EEE support,
preventing control over EEE advertisement, which is enabled by default.

This patch resolves the issue by utilizing the ksz9477_get_features()
function to correctly set the EEE capabilities for the KSZ9131RNX. This
adjustment allows proper control over EEE advertisement and ensures
accurate representation of the device's capabilities.

Fixes: 8b68710a ("net: phy: start using genphy_c45_ethtool_get/set_eee()")
Reported-by: default avatarMarek Vasut <marex@denx.de>
Tested-by: default avatarMarek Vasut <marex@denx.de>
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f2e9d083
    • Stefano Garzarella's avatar
      vsock/loopback: use only sk_buff_head.lock to protect the packet queue · b465518d
      Stefano Garzarella authored 
      pkt_list_lock was used before commit 71dc9ec9 ("virtio/vsock:
replace virtio_vsock_pkt with sk_buff") to protect the packet queue.
After that commit we switched to sk_buff and we are using
sk_buff_head.lock in almost every place to protect the packet queue
except in vsock_loopback_work() when we call skb_queue_splice_init().

As reported by syzbot, this caused unlocked concurrent access to the
packet queue between vsock_loopback_work() and
vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock.

With the introduction of sk_buff_head, pkt_list_lock is redundant and
can cause confusion, so let's remove it and use sk_buff_head.lock
everywhere to protect the packet queue access.

Fixes: 71dc9ec9 ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Cc: bobby.eshleman@bytedance.com
Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com
Signed-off-by: default avatarStefano Garzarella <sgarzare@redhat.com>
Reviewed-by: default avatarBobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: default avatarArseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b465518d
    • David S. Miller's avatar
      Merge branch 'constify-sfp-phy-nodes' · 62203584
      David S. Miller authored 
      Russell King says:

====================
Constify a few sfp/phy fwnodes

This series constifies a bunch of fwnode_handle pointers that are only
used to refer to but not modify the contents of the fwnode structures.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      62203584
    • Russell King (Oracle)'s avatar
      net: phy: constify fwnode_get_phy_node() fwnode argument · 4a0faa02
      Russell King (Oracle) authored 
      fwnode_get_phy_node() does not motify the fwnode structure, so make
the argument const,
Signed-off-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4a0faa02
    • Russell King (Oracle)'s avatar
      net: sfp: constify sfp-bus internal fwnode uses · 850a8d2d
      Russell King (Oracle) authored 
      Constify sfp-bus internal fwnode uses, since we do not modify the
fwnode structures.
Signed-off-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      850a8d2d
    • Russell King (Oracle)'s avatar
      net: sfp: make sfp_bus_find_fwnode() take a const fwnode · a90ac762
      Russell King (Oracle) authored 
      sfp_bus_find_fwnode() does not write to the fwnode, so let's make it
const.
Signed-off-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a90ac762
    • Faicker Mo's avatar
      net/net_failover: fix txq exceeding warning · e3cbdcb0
      Faicker Mo authored 
      The failover txq is inited as 16 queues.
when a packet is transmitted from the failover device firstly,
the failover device will select the queue which is returned from
the primary device if the primary device is UP and running.
If the primary device txq is bigger than the default 16,
it can lead to the following warning:
eth0 selects TX queue 18, but real number of TX queues is 16

The warning backtrace is:
[   32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G            E      6.2.8-1.el7.centos.x86_64 #1
[   32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014
[   32.147730] Call Trace:
[   32.147971]  <TASK>
[   32.148183]  dump_stack_lvl+0x48/0x70
[   32.148514]  dump_stack+0x10/0x20
[   32.148820]  netdev_core_pick_tx+0xb1/0xe0
[   32.149180]  __dev_queue_xmit+0x529/0xcf0
[   32.149533]  ? __check_object_size.part.0+0x21c/0x2c0
[   32.149967]  ip_finish_output2+0x278/0x560
[   32.150327]  __ip_finish_output+0x1fe/0x2f0
[   32.150690]  ip_finish_output+0x2a/0xd0
[   32.151032]  ip_output+0x7a/0x110
[   32.151337]  ? __pfx_ip_finish_output+0x10/0x10
[   32.151733]  ip_local_out+0x5e/0x70
[   32.152054]  ip_send_skb+0x19/0x50
[   32.152366]  udp_send_skb.isra.0+0x163/0x3a0
[   32.152736]  udp_sendmsg+0xba8/0xec0
[   32.153060]  ? __folio_memcg_unlock+0x25/0x60
[   32.153445]  ? __pfx_ip_generic_getfrag+0x10/0x10
[   32.153854]  ? sock_has_perm+0x85/0xa0
[   32.154190]  inet_sendmsg+0x6d/0x80
[   32.154508]  ? inet_sendmsg+0x6d/0x80
[   32.154838]  sock_sendmsg+0x62/0x70
[   32.155152]  ____sys_sendmsg+0x134/0x290
[   32.155499]  ___sys_sendmsg+0x81/0xc0
[   32.155828]  ? _get_random_bytes.part.0+0x79/0x1a0
[   32.156240]  ? ip4_datagram_release_cb+0x5f/0x1e0
[   32.156649]  ? get_random_u16+0x69/0xf0
[   32.156989]  ? __fget_light+0xcf/0x110
[   32.157326]  __sys_sendmmsg+0xc4/0x210
[   32.157657]  ? __sys_connect+0xb7/0xe0
[   32.157995]  ? __audit_syscall_entry+0xce/0x140
[   32.158388]  ? syscall_trace_enter.isra.0+0x12c/0x1a0
[   32.158820]  __x64_sys_sendmmsg+0x24/0x30
[   32.159171]  do_syscall_64+0x38/0x90
[   32.159493]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fix that by reducing txq number as the non-existent primary-dev does.

Fixes: cfc80d9a ("net: Introduce net_failover driver")
Signed-off-by: default avatarFaicker Mo <faicker.mo@ucloud.cn>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e3cbdcb0
  5. 25 Mar, 2023 11 commits
  7. 24 Mar, 2023 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7