- 27 Sep, 2019 18 commits
-
-
Eric Dumazet authored
We can populate skb->priority for some ctl packets instead of always using zero. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Currently, ip6_xmit() sets skb->priority based on sk->sk_priority This is not desirable for TCP since TCP shares the same ctl socket for a given netns. We want to be able to send RST or ACK packets with a non zero skb->priority. This patch has no functional change. Signed-off-by:
-
Andrew Lunn authored
The CPU port does not have a PHY connected to it. So calling phy_support_asym_pause() results in an Opps. As with other DSA drivers, add a guard that the port is a user port. Reported-by:
Michal Vokáč <michal.vokac@ysoft.com> Fixes: 0394a63a ("net: dsa: enable and disable all ports") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
-
Eric Dumazet authored
qdisc_root() use from netem_enqueue() triggers a lockdep warning. __dev_queue_xmit() uses rcu_read_lock_bh() which is not equivalent to rcu_read_lock() + local_bh_disable_bh as far as lockdep is concerned. WARNING: suspicious RCU usage 5.3.0-rc7+ #0 Not tainted ----------------------------- include/net/sch_generic.h:492 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by syz-executor427/8855: #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: lwtunnel_xmit_redirect include/net/lwtunnel.h:92 [inline] #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x2dc/0x2570 net/ipv4/ip_output.c:214 #1: 00000000b5525c01 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x20a/0x3650 net/core/dev.c:3804 #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_xmit_skb net/core/dev.c:3502 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_queue_xmit+0x14b8/0x3650 net/core/dev.c:3838 stack backtrace: CPU: 0 PID: 8855 Comm: syz-executor427 Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5357 qdisc_root include/net/sch_generic.h:492 [inline] netem_enqueue+0x1cfb/0x2d80 net/sched/sch_netem.c:479 __dev_xmit_skb net/core/dev.c:3527 [inline] __dev_queue_xmit+0x15d2/0x3650 net/core/dev.c:3838 dev_queue_xmit+0x18/0x20 net/core/dev.c:3902 neigh_hh_output include/net/neighbour.h:500 [inline] neigh_output include/net/neighbour.h:509 [inline] ip_finish_output2+0x1726/0x2570 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x5fc/0xb90 net/ipv4/ip_output.c:290 ip_finish_output+0x38/0x1f0 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_mc_output+0x292/0xf40 net/ipv4/ip_output.c:417 dst_output include/net/dst.h:436 [inline] ip_local_out+0xbb/0x190 net/ipv4/ip_output.c:125 ip_send_skb+0x42/0xf0 net/ipv4/ip_output.c:1555 udp_send_skb.isra.0+0x6b2/0x1160 net/ipv4/udp.c:887 udp_sendmsg+0x1e96/0x2820 net/ipv4/udp.c:1174 inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
After commit a2c11b03 ("kcm: use BPF_PROG_RUN") syzbot easily triggers the warning in cant_sleep(). As explained in commit 6cab5e90 ("bpf: run bpf programs with preemption disabled") we need to disable preemption before running bpf programs. BUG: assuming atomic context at net/kcm/kcmsock.c:382 in_atomic(): 0, irqs_disabled(): 0, pid: 7, name: kworker/u4:0 3 locks held by kworker/u4:0/7: #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: __write_once_size include/linux/compiler.h:226 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_data kernel/workqueue.c:620 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:647 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: process_one_work+0x88b/0x1740 kernel/workqueue.c:2240 #1: ffff8880a989fdc0 ((work_completion)(&strp->work)){+.+.}, at: process_one_work+0x8c1/0x1740 kernel/workqueue.c:2244 #2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: lock_sock include/net/sock.h:1522 [inline] #2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: strp_sock_lock+0x2e/0x40 net/strparser/strparser.c:440 CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: kstrp strp_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 __cant_sleep kernel/sched/core.c:6826 [inline] __cant_sleep.cold+0xa4/0xbc kernel/sched/core.c:6803 kcm_parse_func_strparser+0x54/0x200 net/kcm/kcmsock.c:382 __strp_recv+0x5dc/0x1b20 net/strparser/strparser.c:221 strp_recv+0xcf/0x10b net/strparser/strparser.c:343 tcp_read_sock+0x285/0xa00 net/ipv4/tcp.c:1639 strp_read_sock+0x14d/0x200 net/strparser/strparser.c:366 do_strp_work net/strparser/strparser.c:414 [inline] strp_work+0xe3/0x130 net/strparser/strparser.c:423 process_one_work+0x9af/0x1740 kernel/workqueue.c:2269 Fixes: a2c11b03 ("kcm: use BPF_PROG_RUN") Fixes: 6cab5e90 ("bpf: run bpf programs with preemption disabled") Signed-off-by:
-
Dan Carpenter authored
The "gmac->phy_mode" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling will never be triggered. Fixes: b1c17215 ("stmmac: add ipq806x glue layer") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_mode" is an enum and in this context GCC will treat it as an unsigned int so it can never be less than zero. Fixes: 492caffa ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by:
-
Dan Carpenter authored
The "iface" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: b7862412 ("of_mdio: Abstract a general interface for phy connect") Signed-off-by:
-
Dan Carpenter authored
The "lp->phy_mode" is an enum but in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: ee06b172 ("net: axienet: add support for standard phy-mode binding") Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by:
-
Dan Carpenter authored
The "dwmac->phy_mode" is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 566e8251 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Dan Carpenter authored
The "phy_mode" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 4c270b55 ("net: ethernet: socionext: add AVE ethernet driver") Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
-
Dan Carpenter authored
The "priv->if_mode" is type phy_interface_t which is an enum. In this context GCC will treat the enum as an unsigned int so this error handling is never triggered. Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_interface" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling is never triggered. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_interface" variable is an enum and in this context GCC will treat it as unsigned so the error handling will never be triggered. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The "priv->phy_mode" variable is an enum and in this context GCC will treat it as unsigned to the error handling will never trigger. Fixes: 57c5bc9a ("net: hisilicon: add hix5hd2 mac driver") Signed-off-by:
-
Dan Carpenter authored
The "chip" variable is an enum, and it's treated as unsigned int by GCC in this context so the error handling isn't triggered. Fixes: e8d45292 ("cxgb4: clean up init_one") Signed-off-by:
-
Dan Carpenter authored
The irqreturn_t type is an enum or an unsigned int in GCC. That creates to problems because it can't detect if the self->aq_hw_ops->hw_irq_read() call fails and at the end the function always returns IRQ_HANDLED. drivers/net/ethernet/aquantia/atlantic/aq_vec.c:316 aq_vec_isr_legacy() warn: unsigned 'err' is never less than zero. drivers/net/ethernet/aquantia/atlantic/aq_vec.c:329 aq_vec_isr_legacy() warn: always true condition '(err >= 0) => (0-u32max >= 0)' Fixes: 970a2e98 ("net: ethernet: aquantia: Vector operations") Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Uwe Kleine-König authored
According to Tal Gilboa the only benefit from DIM comes from a driver that uses it. So it doesn't make sense to make this symbol user visible, instead all drivers that use it should select it (as is already the case AFAICT). Signed-off-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- 26 Sep, 2019 12 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2019-09-26' of https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 First set of fixes for 5.4 sent during the merge window. Most are regressions fixes but the mt7615 problem has been since it was merged. iwlwifi * fix a build regression related CONFIG_THERMAL * avoid using GEO_TX_POWER_LIMIT command on certain firmware versions rtw88 * fixes for skb leaks zd1211rw * fix a compiler warning on 32 bit mt76 * fix the firmware paths for mt7615 to match with linux-firmware wil6210 * fix use of skb after free ==================== Signed-off-by:
-
Jason A. Donenfeld authored
Commit 7d9e5f42 removed references from certain dsts, but accounting for this never translated down into the fib6 suppression code. This bug was triggered by WireGuard users who use wg-quick(8), which uses the "suppress-prefix" directive to ip-rule(8) for routing all of their internet traffic without routing loops. The test case added here causes the reference underflow by causing packets to evaluate a suppress rule. Fixes: 7d9e5f42 ("ipv6: convert major tx path to use RT6_LOOKUP_F_DST_NOREF") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Li RongQing authored
userspace openvswitch patch "(dpif-linux: Implement the API functions to allow multiple handler threads read upcall)" changes its type from U32 to UNSPEC, but leave the kernel unchanged and after kernel 6e237d09 "(netlink: Relax attr validation for fixed length types)", this bug is exposed by the below warning [ 57.215841] netlink: 'ovs-vswitchd': attribute type 5 has an invalid length. Fixes: 5cd667b0 ("openvswitch: Allow each vport to have an array of 'port_id's") Signed-off-by:
Li RongQing <lirongqing@baidu.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Biju Das authored
Document RZ/G2N (R8A774B1) SoC bindings. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Thierry Reding authored
The size of individual pages in the page pool in given by an order. The order is the binary logarithm of the number of pages that make up one of the pages in the pool. However, the driver currently passes the number of pages rather than the order, so it ends up wasting quite a bit of memory. Fix this by taking the binary logarithm and passing that in the order field. Fixes: 2af6106a ("net: stmmac: Introducing support for Page Pool") Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Xin Long authored
Fei Liu reported a crash when doing netperf on a topo of macsec dev over veth: [ 448.919128] refcount_t: underflow; use-after-free. [ 449.090460] Call trace: [ 449.092895] refcount_sub_and_test+0xb4/0xc0 [ 449.097155] tcp_wfree+0x2c/0x150 [ 449.100460] ip_rcv+0x1d4/0x3a8 [ 449.103591] __netif_receive_skb_core+0x554/0xae0 [ 449.108282] __netif_receive_skb+0x28/0x78 [ 449.112366] netif_receive_skb_internal+0x54/0x100 [ 449.117144] napi_gro_complete+0x70/0xc0 [ 449.121054] napi_gro_flush+0x6c/0x90 [ 449.124703] napi_complete_done+0x50/0x130 [ 449.128788] gro_cell_poll+0x8c/0xa8 [ 449.132351] net_rx_action+0x16c/0x3f8 [ 449.136088] __do_softirq+0x128/0x320 The issue was caused by skb's true_size changed without its sk's sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the skb is being freed and the skb's truesize is subtracted from its sk's sk_wmem_alloc in tcp_wfree(), underflow occurs. macsec is calling gro_cells_receive() to receive a packet, which actually requires skb->sk to be NULL. However when macsec dev is over veth, it's possible the skb->sk is still set if the skb was not unshared or expanded from the peer veth. ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy, but it is too late for macsec's calling gro_cells_receive(). So fix it by dropping the skb's sk earlier on rx path of macsec. Fixes: 5491e7c6 ("macsec: enable GRO and RPS on macsec devices") Reported-by:
Xiumei Mu <xmu@redhat.com> Reported-by:
Fei Liu <feliu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-09-24 This series introduces some fixes to mlx5 driver. For more information please see tag log below. Please pull and let me know if there is any problem. For -stable v4.20: ('net/mlx5e: Fix traffic duplication in ethtool steering') For -stable v4.19: ('net/mlx5: Add device ID of upcoming BlueField-2') For -stable v5.3: ('net/mlx5e: Fix matching on tunnel addresses type') ==================== Signed-off-by: -
Jason A. Donenfeld authored
Proper warnings with stack traces make it much easier to figure out what's doing the double free and create more meaningful bug reports from users. Signed-off-by:
-
Vinicius Costa Gomes authored
When removing a cbs instance when offloading is enabled, the crash below can be observed. The problem happens because that when offloading is enabled, the cbs instance is not added to the list. Also, the current code doesn't handle correctly the case when offload is disabled without removing the qdisc: if the link speed changes the credit calculations will be wrong. When we create the cbs instance with offloading enabled, it's not added to the notification list, when later we disable offloading, it's not in the list, so link speed changes will not affect it. The solution for both issues is the same, add the cbs instance being created unconditionally to the global list, even if the link state notification isn't useful "right now". Crash log: [518758.189866] BUG: kernel NULL pointer dereference, address: 0000000000000000 [518758.189870] #PF: supervisor read access in kernel mode [518758.189871] #PF: error_code(0x0000) - not-present page [518758.189872] PGD 0 P4D 0 [518758.189874] Oops: 0000 [#1] SMP PTI [518758.189876] CPU: 3 PID: 4825 Comm: tc Not tainted 5.2.9 #1 [518758.189877] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [518758.189881] RIP: 0010:__list_del_entry_valid+0x29/0xa0 [518758.189883] Code: 90 48 b8 00 01 00 00 00 00 ad de 55 48 8b 17 4c 8b 47 08 48 89 e5 48 39 c2 74 27 48 b8 00 02 00 00 00 00 ad de 49 39 c0 74 2d <49> 8b 30 48 39 fe 75 3d 48 8b 52 08 48 39 f2 75 4c b8 01 00 00 00 [518758.189885] RSP: 0018:ffffa27e43903990 EFLAGS: 00010207 [518758.189887] RAX: dead000000000200 RBX: ffff8bce69f0f000 RCX: 0000000000000000 [518758.189888] RDX: 0000000000000000 RSI: ffff8bce69f0f064 RDI: ffff8bce69f0f1e0 [518758.189890] RBP: ffffa27e43903990 R08: 0000000000000000 R09: ffff8bce69e788c0 [518758.189891] R10: ffff8bce62acd400 R11: 00000000000003cb R12: ffff8bce69e78000 [518758.189892] R13: ffff8bce69f0f140 R14: 0000000000000000 R15: 0000000000000000 [518758.189894] FS: 00007fa1572c8f80(0000) GS:ffff8bce6e0c0000(0000) knlGS:0000000000000000 [518758.189895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [518758.189896] CR2: 0000000000000000 CR3: 000000040a398006 CR4: 00000000003606e0 [518758.189898] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [518758.189899] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [518758.189900] Call Trace: [518758.189904] cbs_destroy+0x32/0xa0 [sch_cbs] [518758.189906] qdisc_destroy+0x45/0x120 [518758.189907] qdisc_put+0x25/0x30 [518758.189908] qdisc_graft+0x2c1/0x450 [518758.189910] tc_get_qdisc+0x1c8/0x310 [518758.189912] ? get_page_from_freelist+0x91a/0xcb0 [518758.189914] rtnetlink_rcv_msg+0x293/0x360 [518758.189916] ? kmem_cache_alloc_node_trace+0x178/0x260 [518758.189918] ? __kmalloc_node_track_caller+0x38/0x50 [518758.189920] ? rtnl_calcit.isra.0+0xf0/0xf0 [518758.189922] netlink_rcv_skb+0x48/0x110 [518758.189923] rtnetlink_rcv+0x10/0x20 [518758.189925] netlink_unicast+0x15b/0x1d0 [518758.189926] netlink_sendmsg+0x1ea/0x380 [518758.189929] sock_sendmsg+0x2f/0x40 [518758.189930] ___sys_sendmsg+0x295/0x2f0 [518758.189932] ? ___sys_recvmsg+0x151/0x1e0 [518758.189933] ? do_wp_page+0x7e/0x450 [518758.189935] __sys_sendmsg+0x48/0x80 [518758.189937] __x64_sys_sendmsg+0x1a/0x20 [518758.189939] do_syscall_64+0x53/0x1f0 [518758.189941] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [518758.189942] RIP: 0033:0x7fa15755169a [518758.189944] Code: 48 c7 c0 ff ff ff ff eb be 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 18 b8 2e 00 00 00 c5 fc 77 0f 05 <48> 3d 00 f0 ff ff 77 5e c3 0f 1f 44 00 00 48 83 ec 28 89 54 24 1c [518758.189946] RSP: 002b:00007ffda58b60b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [518758.189948] RAX: ffffffffffffffda RBX: 000055e4b836d9a0 RCX: 00007fa15755169a [518758.189949] RDX: 0000000000000000 RSI: 00007ffda58b6128 RDI: 0000000000000003 [518758.189951] RBP: 00007ffda58b6190 R08: 0000000000000001 R09: 000055e4b9d848a0 [518758.189952] R10: 0000000000000000 R11: 0000000000000246 R12: 000000005d654b49 [518758.189953] R13: 0000000000000000 R14: 00007ffda58b6230 R15: 00007ffda58b6210 [518758.189955] Modules linked in: sch_cbs sch_etf sch_mqprio netlink_diag unix_diag e1000e igb intel_pch_thermal thermal video backlight pcc_cpufreq [518758.189960] CR2: 0000000000000000 [518758.189961] ---[ end trace 6a13f7aaf5376019 ]--- [518758.189963] RIP: 0010:__list_del_entry_valid+0x29/0xa0 [518758.189964] Code: 90 48 b8 00 01 00 00 00 00 ad de 55 48 8b 17 4c 8b 47 08 48 89 e5 48 39 c2 74 27 48 b8 00 02 00 00 00 00 ad de 49 39 c0 74 2d <49> 8b 30 48 39 fe 75 3d 48 8b 52 08 48 39 f2 75 4c b8 01 00 00 00 [518758.189967] RSP: 0018:ffffa27e43903990 EFLAGS: 00010207 [518758.189968] RAX: dead000000000200 RBX: ffff8bce69f0f000 RCX: 0000000000000000 [518758.189969] RDX: 0000000000000000 RSI: ffff8bce69f0f064 RDI: ffff8bce69f0f1e0 [518758.189971] RBP: ffffa27e43903990 R08: 0000000000000000 R09: ffff8bce69e788c0 [518758.189972] R10: ffff8bce62acd400 R11: 00000000000003cb R12: ffff8bce69e78000 [518758.189973] R13: ffff8bce69f0f140 R14: 0000000000000000 R15: 0000000000000000 [518758.189975] FS: 00007fa1572c8f80(0000) GS:ffff8bce6e0c0000(0000) knlGS:0000000000000000 [518758.189976] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [518758.189977] CR2: 0000000000000000 CR3: 000000040a398006 CR4: 00000000003606e0 [518758.189979] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [518758.189980] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: e0a7683d ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Kalle Valo <kvalo@codeaurora.org> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Rain River authored
Yanjun has been spending quite a lot of time fixing bugs in FORCEDETH source code. I'd like to add Yanjun to maintainers list. Signed-off-by:
Rain River <rain.1986.08.12@gmail.com> Acked-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
- 25 Sep, 2019 9 commits
-
-
Shubhrajyoti Datta authored
macb_64b_desc is always called when HW_DMA_CAP_64B is defined. So the return NULL can never be reached. Remove the dead code. Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Jose Abreu authored
The Flow Control selftest is also available with ASYM Pause. Lets add this check to the test and fix eventual false positive failures. Fixes: 091810db ("net: stmmac: Introduce selftests support") Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
YueHaibing authored
Fix sparse warning: drivers/net/ethernet/freescale/gianfar.c:2070:6: warning: symbol 'reset_gfar' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Colin Ian King authored
There is a statement that is indented one level too many, remove the extraneous tab. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Takeshi Misawa authored
When ppp is closing, __ppp_xmit_process() failed to enqueue skb and skb allocated in ppp_write() is leaked. syzbot reported : BUG: memory leak unreferenced object 0xffff88812a17bc00 (size 224): comm "syz-executor673", pid 6952, jiffies 4294942888 (age 13.040s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d110fff9>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000d110fff9>] slab_post_alloc_hook mm/slab.h:522 [inline] [<00000000d110fff9>] slab_alloc_node mm/slab.c:3262 [inline] [<00000000d110fff9>] kmem_cache_alloc_node+0x163/0x2f0 mm/slab.c:3574 [<000000002d616113>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:197 [<000000000167fc45>] alloc_skb include/linux/skbuff.h:1055 [inline] [<000000000167fc45>] ppp_write+0x48/0x120 drivers/net/ppp/ppp_generic.c:502 [<000000009ab42c0b>] __vfs_write+0x43/0xa0 fs/read_write.c:494 [<00000000086b2e22>] vfs_write fs/read_write.c:558 [inline] [<00000000086b2e22>] vfs_write+0xee/0x210 fs/read_write.c:542 [<00000000a2b70ef9>] ksys_write+0x7c/0x130 fs/read_write.c:611 [<00000000ce5e0fdd>] __do_sys_write fs/read_write.c:623 [inline] [<00000000ce5e0fdd>] __se_sys_write fs/read_write.c:620 [inline] [<00000000ce5e0fdd>] __x64_sys_write+0x1e/0x30 fs/read_write.c:620 [<00000000d9d7b370>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<0000000006e6d506>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by freeing skb, if ppp is closing. Fixes: 6d066734 ("ppp: avoid loop in xmit recursion detection code") Reported-and-tested-by: syzbot+d9c8bf24e56416d7ce2c@syzkaller.appspotmail.com Signed-off-by:Takeshi Misawa <jeliantsurux@gmail.com> Reviewed-by:
Guillaume Nault <gnault@redhat.com> Tested-by:
-
David S. Miller authored
Juliet Kim says: ==================== net/ibmvnic: serialization fixes This series includes two fixes. The first improves reset code to allow linkwatch_event to proceed during reset. The second ensures that no more than one thread runs in reset at a time. v2: - Separate change param reset from do_reset() - Return IBMVNIC_OPEN_FAILED if __ibmvnic_open fails - Remove setting wait_for_reset to false from __ibmvnic_reset(), this is done in wait_for_reset() - Move the check for force_reset_recovery from patch 1 to patch 2 v3: - Restore reset’s successful return in open failure case v4: - Change resetting flag access to atomic ==================== Signed-off-by: -
Juliet Kim authored
The current code allows more than one thread to run in reset. This can corrupt struct adapter data. Check adapter->resetting before performing a reset, if there is another reset running delay (100 msec) before trying again. Signed-off-by:
Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by:
-
Juliet Kim authored
Commit a5681e20 ("net/ibmnvic: Fix deadlock problem in reset") made the change to hold the RTNL lock during a reset to avoid deadlock but linkwatch_event is fired during the reset and needs the RTNL lock. That keeps linkwatch_event process from proceeding until the reset is complete. The reset process cannot tolerate the linkwatch_event processing after reset completes, so release the RTNL lock during the process to allow a chance for linkwatch_event to run during reset. This does not guarantee that the linkwatch_event will be processed as soon as link state changes, but is an improvement over the current code where linkwatch_event processing is always delayed, which prevents transmissions on the device from being deactivated leading transmit watchdog timer to time-out. Release the RTNL lock before link state change and re-acquire after the link state change to allow linkwatch_event to grab the RTNL lock and run during the reset. Fixes: a5681e20 ("net/ibmnvic: Fix deadlock problem in reset") Signed-off-by:
-
Dan Carpenter authored
The debug code dereferences "skb" to print "skb->len" so we have to print the message before we free "skb". Fixes: f99fe49f ("wil6210: add wil_netif_rx() helper function") Signed-off-by:
-
- 24 Sep, 2019 1 commit
-
-
Stephen Hemminger authored
Running old skge driver on PowerPC causes checksum errors because hardware reported 1's complement checksum is in little-endian byte order. Reported-by:
Benoit <benoit.sansoni@gmail.com> Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
