1. 01 Jul, 2020 15 commits
    • Vaibhav Gupta's avatar
      benet: use generic power management · e9a7f8c5
      Vaibhav Gupta authored
      With legacy PM, drivers themselves were responsible for managing the
      device's power states and takes care of register states.
      
      After upgrading to the generic structure, PCI core will take care of
      required tasks and drivers should do only device-specific operations.
      
      Thus, there is no need to call the PCI helper functions like
      pci_enable/disable_device(), pci_save/restore_sate() and
      pci_set_power_state().
      
      Compile-tested only.
      Signed-off-by: default avatarVaibhav Gupta <vaibhavgupta40@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e9a7f8c5
    • Vaibhav Gupta's avatar
      sundance: use generic power management · 78cad4ce
      Vaibhav Gupta authored
      With legacy PM, drivers themselves were responsible for managing the
      device's power states and takes care of register states.
      
      After upgrading to the generic structure, PCI core will take care of
      required tasks and drivers should do only device-specific operations.
      
      Thus, there is no need to call the PCI helper functions like
      pci_enable/disable_device(), pci_save/restore_sate() and
      pci_set_power_state().
      
      Compile-tested only.
      Signed-off-by: default avatarVaibhav Gupta <vaibhavgupta40@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      78cad4ce
    • Vaibhav Gupta's avatar
      liquidio: use generic power management · 1c2e4839
      Vaibhav Gupta authored
      Drivers should not use legacy power management as they have to manage power
      states and related operations, for the device, themselves. This driver was
      handling them with the help of PCI helper functions.
      
      With generic PM, all essentials will be handled by the PCI core. Driver
      needs to do only device-specific operations.
      
      The driver defined empty-body .suspend() and .resume() callbacks earlier.
      They can now be define NULL and bind with "struct dev_pm_ops" variable.
      
      Compile-tested only.
      Signed-off-by: default avatarVaibhav Gupta <vaibhavgupta40@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1c2e4839
    • Vaibhav Gupta's avatar
      ena_netdev: use generic power management · 817a89ae
      Vaibhav Gupta authored
      With legacy PM, drivers themselves were responsible for managing the
      device's power states and takes care of register states.
      
      After upgrading to the generic structure, PCI core will take care of
      required tasks and drivers should do only device-specific operations.
      
      Compile-tested only.
      Signed-off-by: default avatarVaibhav Gupta <vaibhavgupta40@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      817a89ae
    • Vaibhav Gupta's avatar
      starfire: use generic power management · a7c48c72
      Vaibhav Gupta authored
      With legacy PM, drivers themselves were responsible for managing the
      device's power states and takes care of register states.
      
      After upgrading to the generic structure, PCI core will take care of
      required tasks and drivers should do only device-specific operations.
      
      Thus, there is no need to call the PCI helper functions like
      pci_save/restore_sate() and pci_set_power_state().
      
      Compile-tested only.
      Signed-off-by: default avatarVaibhav Gupta <vaibhavgupta40@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a7c48c72
    • Vaibhav Gupta's avatar
      ne2k-pci: use generic power management · 33b7a252
      Vaibhav Gupta authored
      With legacy PM, drivers themselves were responsible for managing the
      device's power states and takes care of register states.
      
      After upgrading to the generic structure, PCI core will take care of
      required tasks and drivers should do only device-specific operations.
      
      Thus, there is no need to call the PCI helper functions like
      pci_enable/disable_device(), pci_save/restore_sate() and
      pci_set_power_state().
      
      Compile-tested only.
      Signed-off-by: default avatarVaibhav Gupta <vaibhavgupta40@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      33b7a252
    • Vaibhav Gupta's avatar
      typhoon: use generic power management · 7b46681c
      Vaibhav Gupta authored
      With legacy PM, drivers themselves were responsible for managing the
      device's power states and takes care of register states. And they use PCI
      helper functions to do it.
      
      After upgrading to the generic structure, PCI core will take care of
      required tasks and drivers should do only device-specific operations.
      
      In this driver:
      typhoon_resume() calls typhoon_wakeup() which then calls PCI helper
      functions pci_set_power_state() and pci_restore_state(). The only other
      function, using typhoon_wakeup() is typhoon_open().
      
      Thus remove the pci_*() calls from tyhpoon_wakeup() and place them in
      typhoon_open(), maintaining the order, to retain the normal behavior of
      the function
      
      Now, typhoon_suspend() calls typhoon_sleep() which then calls PCI helper
      functions pci_enable_wake(), pci_disable_device() and
      pci_set_power_state(). Other functions:
       - typhoon_open()
       - typhoon_close()
       - typhoon_init_one()
      are also invoking typhoon_sleep(). Thus, in this case, cannot simply
      move PCI helper functions call.
      
      Hence, define a new function typhoon_sleep_early() which will do all the
      operations, which typhoon_sleep() was doing before calling PCI helper
      functions. Now typhoon_sleep() will call typhoon_sleep_early() to do
      those tasks, hence, the behavior for _open(), _close and _init_one() remain
      unchanged. And typhon_suspend() only requires typhoon_sleep_early().
      
      Compile-tested only.
      Signed-off-by: default avatarVaibhav Gupta <vaibhavgupta40@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7b46681c
    • Hulk Robot's avatar
      qed: Make symbol 'qed_hw_err_type_descr' static · 4f195d28
      Hulk Robot authored
      Fix sparse build warning:
      
      drivers/net/ethernet/qlogic/qed/qed_main.c:2480:6: warning:
       symbol 'qed_hw_err_type_descr' was not declared. Should it be static?
      Signed-off-by: default avatarHulk Robot <hulkci@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f195d28
    • Colin Ian King's avatar
      net/packet: remove redundant initialization of variable err · 2a6d6c31
      Colin Ian King authored
      The variable err is being initialized with a value that is never read
      and it is being updated later with a new value.  The initialization is
      redundant and can be removed.
      
      Addresses-Coverity: ("Unused value")
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2a6d6c31
    • David S. Miller's avatar
      Merge branch 'cxgb4-add-mirror-action-support-for-TC-MATCHALL' · 2b04a661
      David S. Miller authored
      Rahul Lakkireddy says:
      
      ====================
      cxgb4: add mirror action support for TC-MATCHALL
      
      This series of patches add support to mirror all ingress traffic
      for TC-MATCHALL ingress offload.
      
      Patch 1 adds support to dynamically create a mirror Virtual Interface
      (VI) that accepts all mirror ingress traffic when mirror action is
      set in TC-MATCHALL offload.
      
      Patch 2 adds support to allocate mirror Rxqs and setup RSS for the
      mirror VI.
      
      Patch 3 adds support to replicate all the main VI configuration to
      mirror VI. This includes replicating MTU, promiscuous mode,
      all-multicast mode, and enabled netdev Rx feature offloads.
      
      v3:
      - Replace mirror VI refcount_t with normal u32 variable in all patches.
      - Add back calling cxgb4_port_mirror_start() in cxgb_open(), which
        was there in v1, but got missed in v2 during refactoring, in patch
        3.
      
      v2:
      - Add mutex to protect all mirror VI data, instead of just
        mirror Rxqs, in patch 1 and 2.
      - Remove the un-needed mirror Rxq mutex in patch 2.
      - Simplify the replication code by refactoring t4_set_rxmode()
        to handle mirror VI, instead of duplicating the t4_set_rxmode()
        calls in multiple places in patch 3.
      ====================
      Reviewed-by: default avatarJakub Kicinski <kuba@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2b04a661
    • Rahul Lakkireddy's avatar
      cxgb4: add main VI to mirror VI config replication · 696c278f
      Rahul Lakkireddy authored
      When mirror VI is enabled, replicate various VI config params
      enabled on main VI to mirror VI. These include replicating MTU,
      promiscuous mode, all-multicast mode, and enabled netdev Rx
      feature offloads.
      
      v3:
      - Replace mirror VI refcount_t with normal u32 variable.
      - Add back calling cxgb4_port_mirror_start() in cxgb_open(), which
        was there in v1, but got missed in v2 during refactoring.
      
      v2:
      - Simplify the replication code by refactoring t4_set_rxmode()
        to handle mirror VI, instead of duplicating the t4_set_rxmode()
        calls in multiple places.
      Signed-off-by: default avatarRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      696c278f
    • Rahul Lakkireddy's avatar
      cxgb4: add support for mirror Rxqs · 2b465ed0
      Rahul Lakkireddy authored
      When mirror VI is enabled, allocate the mirror Rxqs and setup the
      mirror VI RSS table. The mirror Rxqs are allocated/freed when
      the mirror VI is created/destroyed or when underlying port is
      brought up/down, respectively.
      
      v3:
      - Replace mirror VI refcount_t with normal u32 variable.
      
      v2:
      - Use mutex to protect all mirror VI data, instead of just
        mirror Rxqs.
      - Remove the un-needed mirror Rxq mutex.
      Signed-off-by: default avatarRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2b465ed0
    • Rahul Lakkireddy's avatar
      cxgb4: add mirror action to TC-MATCHALL offload · fd2261d8
      Rahul Lakkireddy authored
      Add mirror Virtual Interface (VI) support to receive all ingress
      mirror traffic from the underlying device. The mirror VI is
      created dynamically, if the TC-MATCHALL rule has a corresponding
      mirror action. Also request MSI-X vectors needed for the mirror VI
      Rxqs. If no vectors are available, then disable mirror VI support.
      
      v3:
      - Replace mirror VI refcount_t with normal u32 variable.
      
      v2:
      - Add mutex to protect all mirror VI data, instead of just
        mirror Rxqs.
      Signed-off-by: default avatarRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fd2261d8
    • Nathan Chancellor's avatar
      pcnet32: Mark PM functions as __maybe_unused · 75603a31
      Nathan Chancellor authored
      In certain configurations without power management support, the
      following warnings happen:
      
      ../drivers/net/ethernet/amd/pcnet32.c:2928:12: warning:
      'pcnet32_pm_resume' defined but not used [-Wunused-function]
       2928 | static int pcnet32_pm_resume(struct device *device_d)
            |            ^~~~~~~~~~~~~~~~~
      ../drivers/net/ethernet/amd/pcnet32.c:2916:12: warning:
      'pcnet32_pm_suspend' defined but not used [-Wunused-function]
       2916 | static int pcnet32_pm_suspend(struct device *device_d)
            |            ^~~~~~~~~~~~~~~~~~
      
      Mark these functions as __maybe_unused to make it clear to the compiler
      that this is going to happen based on the configuration, which is the
      standard for these types of functions.
      
      Fixes: a86688fb ("pcnet32: Convert to generic power management")
      Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      75603a31
    • Nathan Chancellor's avatar
      amd8111e: Mark PM functions as __maybe_unused · 0adcd298
      Nathan Chancellor authored
      In certain configurations without power management support, the
      following warnings happen:
      
      ../drivers/net/ethernet/amd/amd8111e.c:1623:12: warning:
      'amd8111e_resume' defined but not used [-Wunused-function]
       1623 | static int amd8111e_resume(struct device *dev_d)
            |            ^~~~~~~~~~~~~~~
      ../drivers/net/ethernet/amd/amd8111e.c:1584:12: warning:
      'amd8111e_suspend' defined but not used [-Wunused-function]
       1584 | static int amd8111e_suspend(struct device *dev_d)
            |            ^~~~~~~~~~~~~~~~
      
      Mark these functions as __maybe_unused to make it clear to the compiler
      that this is going to happen based on the configuration, which is the
      standard for these types of functions.
      
      Fixes: 2caf751f ("amd8111e: Convert to generic power management")
      Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0adcd298
  2. 30 Jun, 2020 25 commits