- 08 Feb, 2008 40 commits
-
-
Miklos Szeredi authored
Add a .show_options super operation to affs. Use generic_show_options() and save the complete option string in affs_fill_super() and affs_remount(). Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Miklos Szeredi authored
Add a .show_options super operation to adfs. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Miklos Szeredi authored
Add a new s_options field to struct super_block. Filesystems can save mount options passed to them in mount or remount. It is automatically freed when the superblock is destroyed. A new helper function, generic_show_options() is introduced, which uses this field to display the mount options in /proc/mounts. Another helper function, save_mount_options() may be used by filesystems to save the options in the super block. Signed-off-by:
-
Miklos Szeredi authored
This series addresses the problem of showing mount options in /proc/mounts. Several filesystems which use mount options, have not implemented a .show_options superblock operation. Several others have implemented this callback, but have not kept it fully up to date with the parsed options. Q: Why do we need correct option showing in /proc/mounts? A: We want /proc/mounts to fully replace /etc/mtab. The reasons for this are: - unprivileged mounters won't be able to update /etc/mtab - /etc/mtab doesn't work with private mount namespaces - /etc/mtab can become out-of-sync with reality Q: Can't this be done, so that filesystems need not bother with implementing a .show_mounts callback, and keeping it up to date? A: Only in some cases. Certain filesystems allow modification of a subset of options in their remount_fs method. It is not possible to take this into account without knowing exactly how the filesystem handles options. For the simple case (no remount or remount resets all options) the patchset introduces two helpers: generic_show_options() save_mount_options() These can also be used to emulate the old /etc/mtab behavior, until proper support is added. Even if this is not 100% correct, it's still better than showing no options at all. The following patches fix up most in-tree filesystems, some have been compile tested only, some have been reviewed and acked by the maintainer. Table displaying status of all in-kernel filesystems: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - legend: none - fs has options, but doesn't define ->show_options() some - fs defines ->show_options(), but some only options are shown good - fs shows all options noopt - fs does not have options patch - a patch will be posted merged - a patch has been merged by subsystem maintainer 9p good adfs patch affs patch afs patch autofs patch autofs4 patch befs patch bfs noopt cifs some coda noopt configfs noopt cramfs noopt debugfs noopt devpts patch ecryptfs good efs noopt ext2 patch ext3 good ext4 merged fat patch freevxfs noopt fuse patch fusectl noopt gfs2 good gfs2meta noopt hfs good hfsplus good hostfs patch hpfs patch hppfs noopt hugetlbfs patch isofs patch jffs2 noopt jfs merged minix noopt msdos ->fat ncpfs patch nfs some nfsd noopt ntfs good ocfs2 good ocfs2/dlmfs noopt openpromfs noopt proc noopt qnx4 noopt ramfs noopt reiserfs patch romfs noopt smbfs good sysfs noopt sysv noopt udf patch ufs good vfat ->fat xfs good mm/shmem.c patch drivers/oprofile/oprofilefs.c noopt drivers/infiniband/hw/ipath/ipath_fs.c noopt drivers/misc/ibmasm/ibmasmfs.c noopt drivers/usb/core (usbfs) merged drivers/usb/gadget (gadgetfs) noopt drivers/isdn/capi/capifs.c patch kernel/cpuset.c noopt fs/binfmt_misc.c noopt net/sunrpc/rpc_pipe.c noopt arch/powerpc/platforms/cell/spufs patch arch/s390/hypfs good ipc/mqueue.c noopt security (securityfs) noopt security/selinux/selinuxfs.c noopt kernel/cgroup.c good security/smack/smackfs.c noopt in -mm: reiser4 some unionfs good - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - This patch: Document the rules for handling mount options in the .show_options super operation. Signed-off-by: -
Mike Frysinger authored
Per previous discussions about cleaning up ufs_fs.h, people just want this straight up dropped from userspace export. The only remaining consumer (silo) has been fixed a while ago to not rely on this header. This allows use to move it completely from include/linux/ to fs/ufs/ seeing as how the only in-kernel consumer is fs/ufs/. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Jan Kara <jack@ucw.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
H. Peter Anvin authored
When the conversion factor between jiffies and milli- or microseconds is not a single multiply or divide, as for the case of HZ == 300, we currently do a multiply followed by a divide. The intervening result, however, is subject to overflows, especially since the fraction is not simplified (for HZ == 300, we multiply by 300 and divide by 1000). This is exposed to the user when passing a large timeout to poll(), for example. This patch replaces the multiply-divide with a reciprocal multiplication on 32-bit platforms. When the input is an unsigned long, there is no portable way to do this on 64-bit platforms there is no portable way to do this since it requires a 128-bit intermediate result (which gcc does support on 64-bit platforms but may generate libgcc calls, e.g. on 64-bit s390), but since the output is a 32-bit integer in the cases affected, just simplify the multiply-divide (*3/10 instead of *300/1000). The reciprocal multiply used can have off-by-one errors in the upper half of the valid output range. This could be avoided at the expense of having to deal with a potential 65-bit intermediate result. Since the intent is to avoid overflow problems and most of the other time conversions are only semiexact, the off-by-one errors were considered an acceptable tradeoff. At Ralf Baechle's suggestion, this version uses a Perl script to compute the necessary constants. We already have dependencies on Perl for kernel compiles. This does, however, require the Perl module Math::BigInt, which is included in the standard Perl distribution starting with version 5.8.0. In order to support older versions of Perl, include a table of canned constants in the script itself, and structure the script so that Math::BigInt isn't required if pulling values from said table. Running the script requires that the HZ value is available from the Makefile. Thus, this patch also adds the Kconfig variable CONFIG_HZ to the architectures which didn't already have it (alpha, cris, frv, h8300, m32r, m68k, m68knommu, sparc, v850, and xtensa.) It does *not* touch the sh or sh64 architectures, since Paul Mundt has dealt with those separately in the sh tree. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Cc: Ralf Baechle <ralf@linux-mips.org>, Cc: Sam Ravnborg <sam@ravnborg.org>, Cc: Paul Mundt <lethal@linux-sh.org>, Cc: Richard Henderson <rth@twiddle.net>, Cc: Michael Starvik <starvik@axis.com>, Cc: David Howells <dhowells@redhat.com>, Cc: Yoshinori Sato <ysato@users.sourceforge.jp>, Cc: Hirokazu Takata <takata@linux-m32r.org>, Cc: Geert Uytterhoeven <geert@linux-m68k.org>, Cc: Roman Zippel <zippel@linux-m68k.org>, Cc: William L. Irwin <sparclinux@vger.kernel.org>, Cc: Chris Zankel <chris@zankel.net>, Cc: H. Peter Anvin <hpa@zytor.com>, Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by:
-
Joe Perches authored
Makes an embedded image a bit smaller. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Christoph Hellwig authored
do_generic_mapping_read was used by gfs2 for internals reads, but this use of the interface was rather suboptimal (as was the whole interface) and has been replaced by an internal helper now. This patch kills do_generic_mapping_read and surrounding damage in preparation of additional cleanups for the buffered read path. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Mike Frysinger authored
All of the asm-*/types.h headers have been updated to no longer check __STRICT_ANSI__ for the 64bit types, so this brings linux/types.h in line. Signed-off-by:
-
Andi Kleen authored
No BKL needed in pipe_ioctl Signed-off-by:
Andi Kleen <ak@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
David Brownell authored
This is a LED driver using the PWM on newer SOCs from Atmel; brightness is controlled by changing the PWM duty cycle. So for example if you've set up two leds labeled "pwm0" and "pwm1": echo 0 > /sys/class/leds/pwm2/brightness # off (0%) echo 80 > /sys/class/leds/pwm2/brightness echo 255 > /sys/class/leds/pwm2/brightness # on (100%) Note that "brightness" here isn't linear; maybe that should change. Going from 4 to 8 probably doubles perceived brightness, while 244 to 248 is imperceptible. This is mostly intended to be a simple example of PWM, although it's realistic since LCD backlights are often driven with PWM to conserve battery power (and offer brightness options). Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
David Brownell authored
PWM device setup, and a simple PWM driver exposing a programming interface giving access to each channel's full capabilities. Note that this doesn't support starting several channels in synch. [hskinnemoen@atmel.com: allocate platform device dynamically] [hskinnemoen@atmel.com: Kconfig fix] Signed-off-by:
-
Jan Engelhardt authored
Signed-off-by:
Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by:
-
Jan Engelhardt authored
Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
David Howells <dhowells@redhat.com> Acked-by:
Bryan Wu <bryan.wu@analog.com> Acked-by:
Jesper Nilsson <jesper.nilsson@axis.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
Jan Engelhardt authored
Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Jan Kara authored
Implement dmode option for iso9660 filesystem to allow setting of access rights for directories on the filesystem. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: "Ilya N. Golubev" <gin@mo.msk.ru> Signed-off-by:
-
Li Zefan authored
delayed_work_timer_fn() is a timer function, make it static. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
-
Haavard Skinnemoen authored
When possible, pass the tty name to request_irq() so that the user can easily distinguish the different serial ports in /proc/interrupts. Signed-off-by:
Marc Pignat <marc.pignat@hevs.ch> Signed-off-by:
-
Haavard Skinnemoen authored
As pointed out by David Brownell, we really ought to be using container_of when converting from "struct uart_port *" to "struct atmel_uart_port *". Signed-off-by:
-
Haavard Skinnemoen authored
Introduced by atmel_serial-split-the-interrupt-handler.patch. Thanks to michael <trimarchi@gandalf.sssup.it> for spotting it. Signed-off-by:
-
Chip Coldwell authored
This patch is based on the DMA-patch by Chip Coldwell for the AT91/AT32 serial USARTS, with some tweaks to make it apply neatly on top of the other patches in this series. The RX and TX code has been moved to a tasklet and reworked a bit. Instead of depending on the ENDRX and TIMEOUT bits in CSR, we simply grab as much data as we can from the DMA buffers. I think this closes a race where the ENDRX bit is set after we read CSR but before we read RPR, although I haven't confirmed this. Similarly, the two TX handlers (ENDTX and TXBUFE) have been combined into one. Since the current code only uses a single TX buffer, there's no point in handling those interrupts separately. This also fixes a DMA sync bug in the original patch. [linux@bohmer.net: rebased onto irq-splitup patch] [hskinnemoen@atmel.com: moved to tasklet, fixed dma bug, misc cleanups] [hskinnemoen@atmel.com: atmel_serial dma: Misc fixes and cleanups] Signed-off-by:
Remy Bohmer <linux@bohmer.net> Signed-off-by:
-
Remy Bohmer authored
Split up the interrupt handler of the serial port into a interrupt top-half and a tasklet. The goal is to get the interrupt top-half as short as possible to minimize latencies on interrupts. But the old code also does some calls in the interrupt handler that are not allowed on preempt-RT in IRQF_NODELAY context. This handler is executed in this context because of the interrupt sharing with the timer interrupt. The timer interrupt on Preempt-RT runs in IRQF_NODELAY context. The tasklet takes care of handling control status changes, pushing incoming characters to the tty layer, handling break and other errors. It also handles pushing TX data into the data register. Reading the complete receive queue is still done in the top-half because we never want to miss any incoming character. [hskinnemoen@atmel.com: misc cleanups and simplifications] Signed-off-by:
-
Haavard Skinnemoen authored
When an error happens in probe(), the clocks should be disabled, but only if the port isn't already used as a console. In remove(), the port struct shouldn't be freed because it's defined statically. Signed-off-by:
-
Haavard Skinnemoen authored
If BRGR is zero, the baud rate generator isn't running, so the boot loader can't have initialized the port. Signed-off-by:
Andrew Victor <linux@maxim.org.za> Tested-by:
-
Haavard Skinnemoen authored
Replace two instances of barrier() with cpu_relax() since that's the right thing to do when busy-waiting. This does not actually change anything since cpu_relax() is defined as barrier() on both ARM and AVR32. Signed-off-by:
-
Remy Bohmer authored
Clean up the atmel_serial driver to conform the coding rules. It contains no functional change. Signed-off-by:
-
Haavard Skinnemoen authored
The following patchset cleans up the atmel_serial driver a bit, moves a significant portion of the interrupt handler into a tasklet, and adds DMA support. This is the result of a combined effort by Chip Coldwell, Remy Bohmer and me. The patches should apply cleanly onto Linus' latest git tree, and I've also tested it on -mm (with a couple of avr32 fixes applied to make the rest of the tree compile.) With DMA, I see transfer rates around 92 kbps when transferring a big file using ZModem (both directions are roughly the same.) I've also tested the same thing with a bunch of debug options enabled. The transfer rate is slightly lower, but no errors are reported. Note that break and error handling doesn't work too well with DMA enabled. This is a common problem with all the efforts I've seen adding DMA support to this driver (including my own). The PDC error handling also accesses icount without locking. I'm tempted to just ignore the problem for now and hopefully come up with a solution later. This patch: The atmel_serial driver never had a MAINTAINERS entry, although Andrew Victor has effectively been acting as a maintainer since he got the driver merged into mainline in the first place. I'll keep Cc'ing Andrew on all patches, but I'm going to take the main responsibility for getting things moving upstream from now on. Signed-off-by:
-
Wim Van Sebroeck authored
From version 2.6 of the SMBIOS standard, type 10 (On Board Devices Information) becomes obsolete. The reason for this is that no further fields can be added to this structure without adversely affecting existing software's ability to properly parse the data. Therefore type 41 (Onboard Devices Extended Information) was added. The structure is as follows: struct smbios_type_41 { u8 type; u8 length; u16 handle; u8 reference_designation_string; u8 device_type; /* same device type as in type 10 */ u8 device_type_instance; u16 segment_group_number; u8 bus_number; u8 device_function_number; }; For more info: http://www.dmtf.org/standards/smbiosSigned-off-by:Wim Van Sebroeck <wim@iguana.be> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Stephan Boettcher authored
We bought cheap notebooks to control our custom data acquisition system, which requires EPP mode (read/write, data/addr). The bios does not offer EPP mode, and indeed hardware EPP mode appears not to work, although the parport driver tries to use it. EPPSWE mode does work for data r/w and addr write, but addr read requires this patch. (stephan)rshgse3: lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 12) 05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 08:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 08:03.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) 08:03.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) (stephan)rshgse3: grep . /proc/sys/dev/parport/parport0/* /proc/sys/dev/parport/parport0/base-addr:888 1912 /proc/sys/dev/parport/parport0/dma:-1 /proc/sys/dev/parport/parport0/irq:7 /proc/sys/dev/parport/parport0/modes:PCSPP,TRISTATE,EPP /proc/sys/dev/parport/parport0/spintime:500 Signed-off-by:
-
Adrian Bunk authored
The scheduled removal of the 'time' option. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Arjan van de Ven authored
These exports (which aren't used and which are in fact dangerous to use because they pretty much form a security hole to use) have been marked _UNUSED since 2.6.24 with removal in 2.6.25. This patch is their final departure from the Linux kernel tree. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Andy Whitcroft authored
This version brings a large number of fixes which have built up over the Christmas period. Mostly these are fixes for false positives, both through improvments to unary checks and possible type detection. It also brings new checks for while location and CVS keywords. Of note: - a number of fixes to unary detection - detection of a number of new forms of types to improve type matching - better inline handling - recognision of '%' as an operator Andy Whitcroft (28): Version: 0.13 unary detection: maintain bracket state across lines move to pre-sanitising the entire file the text of a #error statement should be treated like it is in quotes line sanitisation needs to target double backslash correctly tighten comment guestimation for lines starting ' * ' debug: add a debug framework prevent unclosed single quotes from spreading add % as an operator the text of a #warning statement should be treated like it is in quotes possible matching applies in typedefs single statement block checks must not trigger when two or more statements possible types: local variables may also be const treat inline as a type attribute to even when out of place possible types: sparse annotations are valid indicators possible types: beef up the possible type testing check for hanging while statements on the wrong line utf8 checks need to occur against the raw lines function brace checks should use any whitespece matches comments should take up space in the line when sanitised remove debugging from if assignment checks possible types -- ensure we detect all pointer casts fix tests for function spacing in the presence of #define clean up the UTF-8 error message to be clearer test-lib: invert the status report, output success counts detect and report CVS keywords tests: break out tests Add $Id$ to the CVS keyword checks Benny Halevy (1): checkpatch.pl: recognize the #elif preprocessor directive Geert Uytterhoeven (1): print the filenames of patches where available Mauro Carvalho Chehab (1): Fix missing \n in checkpatch.pl Signed-off-by:Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Andrew Morton authored
fs/afs/security.c: In function 'afs_permission': fs/afs/security.c:290: warning: 'access' may be used uninitialized in this function Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrew Morton authored
fs/hfsplus/unicode.c: In function 'hfsplus_hash_dentry': fs/hfsplus/unicode.c:328: warning: 'dsize' may be used uninitialized in this function Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Jan Kara authored
I've tried to contact Ben Fennema a few times but without success. Since I'm currently probably closest to being an UDF maintainer, I guess it's fine to also change the entry in MAINTAINERS. Signed-off-by:
-
Jan Kara authored
When adding directory entry to a directory, we have to properly increase length of the last extent. Handle this similarly as extending regular files - make extents always have size multiple of block size (it will be truncated down to proper size in udf_clear_inode()). Signed-off-by:
-
Jan Kara authored
Position in directory returned by readdir is offset of directory entry divided by four (don't ask me why). Make this conversion only when reading f_pos from userspace / writing it there and internally work in bytes. It makes things more easily readable and also fixes a bug (we forgot to divide length of the entry by 4 when advancing f_pos in udf_add_entry()). Signed-off-by:
-
Mike Galbraith authored
Fix udf_clear_inode() to request asynchronous writeout in icache reclaim path. Signed-off-by:
Mike Galbraith <efault@gmx.de> Acked-by:
-
Marcin Slusarz authored
sparse generated: fs/udf/namei.c:896:15: originally declared here fs/udf/namei.c:1147:41: warning: incorrect type in argument 3 (different signedness) fs/udf/namei.c:1147:41: expected int *offset fs/udf/namei.c:1147:41: got unsigned int *<noident> fs/udf/namei.c:1152:78: warning: incorrect type in argument 3 (different signedness) fs/udf/namei.c:1152:78: expected int *offset fs/udf/namei.c:1152:78: got unsigned int *<noident> Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by:
-
Marcin Slusarz authored
sparse generated: fs/udf/inode.c:324:41: warning: incorrect type in argument 4 (different signedness) fs/udf/inode.c:324:41: expected long *<noident> fs/udf/inode.c:324:41: got unsigned long *<noident> inode_getblk always set 4th argument to uint32_t value 3rd parameter of map_bh is sector_t (which is unsigned long or u64) so convert phys value to sector_t fs/udf/inode.c:1818:47: warning: incorrect type in argument 3 (different signedness) fs/udf/inode.c:1818:47: expected int *<noident> fs/udf/inode.c:1818:47: got unsigned int *<noident> fs/udf/inode.c:1826:46: warning: incorrect type in argument 3 (different signedness) fs/udf/inode.c:1826:46: expected int *<noident> fs/udf/inode.c:1826:46: got unsigned int *<noident> udf_get_filelongad and udf_get_shortad are called always for uint32_t values (struct extent_position->offset), so it's safe to convert offset parameter to uint32_t gcc warned: fs/udf/inode.c: In function 'udf_get_block': fs/udf/inode.c:299: warning: 'phys' may be used uninitialized in this function initialize it to 0 (if someday someone will break inode_getblk we will catch it immediately) Signed-off-by:
-
