AT91 SoC for 5.5

 - Document new SoC: sam9x60
 - rework sam9x60 Kconfig option

* tag 'at91-5.6-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: at91: Documentation: add sam9x60 product and datasheet
  ARM: at91: pm: use of_device_id array to find the proper shdwc node
  ARM: at91: pm: use SAM9X60 PMC's compatible
  ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU for sam9x60
  drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC for sam9x60
  power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60
  drivers: soc: atmel: move sam9x60 under its own config flag
  ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
  ARM: at91: Kconfig: add config flag for SAM9X60 SoC
  ARM: at91: Kconfig: add sam9x60 pll config flag

Link: https://lore.kernel.org/r/20200113161612.GA1358903@piout.netSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-soc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc

i.MX SoC changes for 5.6:

 - Add support for reading serial number from OCOTP on i.MX7ULP.
 - A patch from Anson to enable ARM_ERRATA_814220 for i.MX6UL & i.MX7D,
   and a fixup patch from Arnd to select the option only for ARMv7-A.

* tag 'imx-soc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A
  ARM: imx: Enable ARM_ERRATA_814220 for i.MX6UL and i.MX7D
  ARM: imx: Add i.MX7ULP SoC serial number support
  ARM: imx: Fix boot crash if ocotp is not found
  ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
  ARM: dts: imx6ul-evk: Fix peripheral regulator
  arm64: dts: ls1028a: fix reboot node
  arm64: dts: ls1028a: fix typo in TMU calibration data
  ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs
  ARM: dts: e60k02: fix power button
  ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing

Link: https://lore.kernel.org/r/20200113034006.17430-2-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.6-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc

ARM: tegra: Core changes for v5.6-rc1

Contains a couple of fixes for RAM repair on Tegra124.

* tag 'tegra-for-5.6-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume
  ARM: tegra: Modify reshift divider during LP1
  ARM: tegra: Enable PLLP bypass during Tegra124 LP1

Link: https://lore.kernel.org/r/20200111003553.2411874-5-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-soc-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung mach/soc changes for v5.6

Cleanups (Samsung and Exynos names, Kconfig help text correction).

* tag 'samsung-soc-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: samsung: Rename Samsung and Exynos to lowercase
  ARM: exynos: Correct the help text for platform Kconfig option

Link: https://lore.kernel.org/r/20200110172334.4767-4-krzk@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM-based SoCs Kconfig/machine
changes for 5.6, please pull the following:

- Justin adds an entry for BCM7216's debug UART to support DEBUG_LL
- Florian adds a select ARM_AMBA to support the ARM PL011 UART/console
  which is required on BCM7211

* tag 'arm-soc/for-5.6/soc' of https://github.com/Broadcom/stblinux:
  ARM: bcm: Select ARM_AMBA for ARCH_BRCMSTB
  ARM: brcmstb: Add debug UART entry for 7216

Link: https://lore.kernel.org/r/20200108191114.15987-3-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Add the new SAM9X60 ARM926-based SoC from Microchip and its associated
datasheet.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200110090103.7728-1-nicolas.ferre@microchip.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use of_device_id array to find the proper shdwc compatibile node.
SAM9X60's shdwc changes were not integrated when
commit eaedc0d3 ("ARM: at91: pm: add ULP1 support for SAM9X60")
was integrated.

Fixes: eaedc0d3 ("ARM: at91: pm: add ULP1 support for SAM9X60")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1576062248-18514-3-git-send-email-claudiu.beznea@microchip.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

SAM9X60 PMC's has a different PMC. It was not integrated at the moment
commit 01c7031c ("ARM: at91: pm: initial PM support for SAM9X60")
was published.

Fixes: 01c7031c ("ARM: at91: pm: initial PM support for SAM9X60")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1576062248-18514-2-git-send-email-claudiu.beznea@microchip.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

i.MX7D is supported for either the v7-A or the v7-M cores,
but the latter causes a warning:

WARNING: unmet direct dependencies detected for ARM_ERRATA_814220
  Depends on [n]: CPU_V7 [=n]
  Selected by [y]:
  - SOC_IMX7D [=y] && ARCH_MXC [=y] && (ARCH_MULTI_V7 [=n] || ARM_SINGLE_ARMV7M [=y])

Make the select statement conditional.

Fixes: 4562fa4c ("ARM: imx: Enable ARM_ERRATA_814220 for i.MX6UL and i.MX7D")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Configure the clock controller to set an alternate clock for the CPU
when it receives an IRQ during LP1 (system suspend). Specifically, use
clk_m (the crystal) rather than clk_s (a 32KHz clock). Such an IRQ will
be the LP1 wake event. This reduces the amount of time taken to resume
from LP1.

NVIDIA's downstream kernel executes this code on both Tegra30 and
Tegra124, so it appears OK to make this change unconditionally.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The reshift hardware module implements the RAM re-repair process. This
module uses PLLP as an input clock during LP1 resume. The input divider
for this clock is typically set for PLLP's normal rate. During LP1
resume, PLLP is bypassed and so runs at the crystal rate, which is much
slower. Consequently, decrease the divider so that the reshift module
runs at a reasonable rate during LP1 resume.

NVIDIA's downstream kernel code only does this if not compiled for
Tegra30, so the added code is made conditional upon the chip ID.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

For a little over a year, U-Boot has configured the flow controller to
perform automatic RAM re-repair on off->on power transitions of the CPU
rail[1]. This is mandatory for correct operation of Tegra124. However,
RAM re-repair relies on certain clocks, which the kernel must enable and
leave running. PLLP is one of those clocks. This clock is shut down
during LP1 in order to save power. Enable bypass (which I believe routes
osc_div_clk, essentially the crystal clock, to the PLL output) so that
this clock signal toggles even though the PLL is not active. This is
required so that LP1 power mode (system suspend) operates correctly.

The bypass configuration must then be undone when resuming from LP1, so
that all peripheral clocks run at the expected rate. Without this, many
peripherals won't work correctly; for example, the UART baud rate would
be incorrect.

NVIDIA's downstream kernel code only does this if not compiled for
Tegra30, so the added code is made conditional upon the chip ID.
NVIDIA's downstream code makes this change conditional upon the active
CPU cluster. The upstream kernel currently doesn't support cluster
switching, so this patch doesn't test the active CPU cluster ID.

[1] 3cc7942a4ae5 ARM: tegra: implement RAM repair
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.

"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names.  Therefore they should be written with lowercase letters starting
with capital letter.

The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.

Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

ARCH_EXYNOS option is used for entire ARMv7 Exynos family, including
also Exynos3 SoCs.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Merge tag 'omap-for-v5.6/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

SoC changes for omaps for v5.6 merge window

SoC related changes for omaps that mostly relate to making iommus
to start probing with ti-sysc interconnect target module driver:

- Add missing lcdc clockdomain for am43xx

- Pass auxdata for reset control driver

- Remove old pdata quirks for iommus

- Add workaround for dra7 dsp mstandby errata

- Convert iommu platform code to probe with ti-sysc

- Use sperate iommu auxdata for ipu1

* tag 'omap-for-v5.6/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: use separate IOMMU pdata to fix DRA7 IPU1 boot
  ARM: OMAP2+: omap-iommu.c conversion to ti-sysc
  ARM: OMAP2+: Add workaround for DRA7 DSP MStandby errata i879
  ARM: OMAP4+: remove pdata quirks for omap4+ iommus
  ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  ARM: OMAP2+: am43xx: Add lcdc clockdomain

Link: https://lore.kernel.org/r/pull-1578420398-290837@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

BCM7211 uses a PL011 UART and is supported using ARCH_BRCMSTB, make sure
that we can enable that driver by selecting ARM_AMBA.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

7216 has the same memory map as 7278 and the same physical address for
the UART, alias the definition accordingly.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
[florian: expand commit message]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

The IPU1 MMU has been using common IOMMU pdata quirks defined and
used by all IPU IOMMU devices on OMAP4 and beyond. Separate out the
pdata for IPU1 MMU with the additional .set_pwrdm_constraint ops
plugged in, so that the IPU1 power domain can be restricted to ON
state during the boot and active period of the IPU1 remote processor.
This eliminates the pre-conditions for the IPU1 boot issue as
described in commit afe518400bdb ("iommu/omap: fix boot issue on
remoteprocs with AMMU/Unicache").

NOTE:
1. RET is not a valid target power domain state on DRA7 platforms,
   and IPU power domain is normally programmed for OFF. The IPU1
   still fails to boot though, and an unclearable l3_noc error is
   thrown currently on 4.14 kernel without this fix. This behavior
   is slightly different from previous 4.9 LTS kernel.
2. The fix is currently applied only to IPU1 on DRA7xx SoC, as the
   other affected processors on OMAP4/OMAP5/DRA7 are in domains
   that are not entering RET. IPU2 on DRA7 is in CORE power domain
   which is only programmed for ON power state. The fix can be easily
   scaled if these domains do hit RET in the future.
3. The issue was not seen on current DRA7 platforms if any of the
   DSP remote processors were booted and using one of the GPTimers
   5, 6, 7 or 8 on previous 4.9 LTS kernel. This was due to the
   errata fix for i874 implemented in commit 1cbabcb9 ("ARM:
   DRA7: clockdomain: Implement timer workaround for errata i874")
   which keeps the IPU1 power domain from entering RET when the
   timers are active. But the timer workaround did not make any
   difference on 4.14 kernel, and an l3_noc error was seen still
   without this fix.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Convert omap2 iommu platform code to use ti-sysc instead of legacy
omap-device / hwmod interfaces.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Errata Title:
i879: DSP MStandby requires CD_EMU in SW_WKUP

Description:
The DSP requires the internal emulation clock to be actively toggling
in order to successfully enter a low power mode via execution of the
IDLE instruction and PRCM MStandby/Idle handshake. This assumes that
other prerequisites and software sequence are followed.

Workaround:
The emulation clock to the DSP is free-running anytime CCS is connected
via JTAG debugger to the DSP subsystem or when the CD_EMU clock domain
is set in SW_WKUP mode. The CD_EMU domain can be set in SW_WKUP mode
via the CM_EMU_CLKSTCTRL [1:0]CLKTRCTRL field.

Implementation:
This patch implements this workaround by denying the HW_AUTO mode
for the EMU clockdomain during the power-up of any DSP processor
and re-enabling the HW_AUTO mode during the shutdown of the last
DSP processor (actually done during the enabling and disabling of
the respective DSP MDMA MMUs). Reference counting has to be used to
manage the independent sequencing between the multiple DSP processors.

This switching is done at runtime rather than a static clockdomain
flags value to meet the target power domain state for the EMU power
domain during suspend.

Note that the DSP MStandby behavior is not consistent across all
boards prior to this fix. Please see commit 45f871eec6c0 ("ARM:
OMAP2+: Extend DRA7 IPU1 MMU pdata quirks to DSP MDMA MMUs") for
details.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

IOMMU driver will be using ti-sysc bus driver for power management control
going forward, and the pdata quirks are not needed for anything anymore.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The parent clockdomain for reset must be in force wakeup mode, otherwise
the reset may never complete. Add pdata quirks for this purpose for PRM
driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Pull rdma fixes from Doug Ledford:
 "A small collection of -rc fixes. Mostly. One API addition, but that's
  because we wanted to use it in a fix. There's also a bug fix that is
  going to render the 5.5 kernel's soft-RoCE driver incompatible with
  all soft-RoCE versions prior, but it's required to actually implement
  the protocol according to the RoCE spec and required in order for the
  soft-RoCE driver to be able to successfully work with actual RoCE
  hardware.

  Summary:

   - Update Steve Wise info

   - Fix for soft-RoCE crc calculations (will break back compatibility,
     but only with the soft-RoCE driver, which has had this bug since it
     was introduced and it is an on-the-wire bug, but will make
     soft-RoCE fully compatible with real RoCE hardware)

   - cma init fixup

   - counters oops fix

   - fix for mlx4 init/teardown sequence

   - fix for mkx5 steering rules

   - introduce a cleanup API, which isn't a fix, but we want to use it
     in the next fix

   - fix for mlx5 memory management that uses API in previous patch"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/mlx5: Fix device memory flows
  IB/core: Introduce rdma_user_mmap_entry_insert_range() API
  IB/mlx5: Fix steering rule of drop and count
  IB/mlx4: Follow mirror sequence of device add during device removal
  RDMA/counter: Prevent auto-binding a QP which are not tracked with res
  rxe: correctly calculate iCRC for unaligned payloads
  Update mailmap info for Steve Wise
  RDMA/cma: add missed unregister_pernet_subsys in init failure

Pull RISC-V fixes from Paul Walmsley:
 "Two minor build fixes:

   - Fix builds of the ELF loader when built with 'make -j1' (nommu
     only)

   - Fix CONFIG_SOC_SIFIVE builds when CONFIG_TTY is disabled (found
     during randconfig testing)"

* tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: only select serial sifive if TTY is enabled
  riscv: Fix build dependency for loader

Pull xen fixes from Juergen Gross:
 "Two fixes: one for a resource accounting bug in some configurations
  and a fix for another patch which went into rc1"

* tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: fix ballooned page accounting without hotplug enabled
  xen-blkback: prevent premature module unload

Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski:
 "This small series replaces all in-kernel calls to the
  userspace-focused ksys_mount() and ksys_dup() with calls to
  kernel-centric functions:

  For each replacement of ksys_mount() with do_mount(), one needs to
  verify that the first and third parameter (char *dev_name, char *type)
  are strings allocated in kernelspace and that the fifth parameter
  (void *data) is either NULL or refers to a full page (only occurence
  in init/do_mounts.c::do_mount_root()). The second and fourth
  parameters (char *dir_name, unsigned long flags) are passed by
  ksys_mount() to do_mount() unchanged, and therefore do not require
  particular care.

  Moreover, instead of pretending to be userspace, the opening of
  /dev/console as stdin/stdout/stderr can be implemented using in-kernel
  functions as well. Thereby, ksys_dup() can be removed for good"

[ This doesn't get rid of the special "kernel init runs with KERNEL_DS"
  case, but it at least removes _some_ of the users of "treat kernel
  pointers as user pointers for our magical init sequence".

  One day we'll hopefully be rid of it all, and can initialize our
  init_thread addr_limit to USER_DS.    - Linus ]

* 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  fs: remove ksys_dup()
  init: unify opening /dev/console as stdin/stdout/stderr
  init: use do_mount() instead of ksys_mount()
  initrd: use do_mount() instead of ksys_mount()
  devtmpfs: use do_mount() instead of ksys_mount()

Merge tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fall through fix from Gustavo Silva:
 "Fix compile error on sh by marking expected switch fall-through"

* tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  sh: kgdb: Mark expected switch fall-throughs

Pull SCSI fixes from James Bottomley:
 "24 fixes, all in drivers. The lion's share (16) are qla2xxx and the
  rest are iscsi (3), ufs (2), smarpqi, lpfc and libsas"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
  scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func
  scsi: iscsi: Fix a potential deadlock in the timeout handler
  scsi: smartpqi: Update attribute name to `driver_version`
  scsi: libsas: stop discovering if oob mode is disconnected
  scsi: ufs: Disable autohibern8 feature in Cadence UFS
  scsi: iscsi: qla4xxx: fix double free in probe
  scsi: ufs: Give an unique ID to each ufs-bsg
  scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB
  scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI
  scsi: qla2xxx: Don't defer relogin unconditonally
  scsi: qla2xxx: Send Notify ACK after N2N PLOGI
  scsi: qla2xxx: Configure local loop for N2N target
  scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length
  scsi: qla2xxx: Don't call qlt_async_event twice
  scsi: qla2xxx: Allow PLOGI in target mode
  scsi: qla2xxx: Change discovery state before PLOGI
  scsi: qla2xxx: Drop superfluous INIT_WORK of del_work
  scsi: qla2xxx: Initialize free_work before flushing it
  scsi: qla2xxx: Use explicit LOGO in target mode
  scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd
  ...

Pull char/misc driver fixes from Greg KH:
 "Here are six small fixes for some reported char/misc driver issues:

   - fix build warnings with new 'awk' with the raid6 code

   - four interconnect driver bugfixes

   - binder fix for reported problem

  All of these except the binder fix have been in linux-next with no
  reported issues. The binder fix is "new" but Todd says it is good as
  he has tested it :)"

* tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: fix incorrect calculation for num_valid
  interconnect: qcom: msm8974: Walk the list safely on node removal
  interconnect: qcom: qcs404: Walk the list safely on node removal
  interconnect: qcom: sdm845: Walk the list safely on node removal
  interconnect: qcom: Fix Kconfig indentation
  lib: raid6: fix awk build warnings

Pull driver core fixes from Greg KH:
 "Here are two small driver core fixes to resolve some reported issues

  The first is to handle the much-reported (by the build systems)
  problem that superH does not boot anymore.

  The second handles an issue in the new platform logic that a number of
  people ran into with the automated tests in kbuild

  Both of these have been in linux-next with no reported issues"

* tag 'driver-core-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers: Fix boot problem on SuperH
  of/platform: Unconditionally pause/resume sync state during kernel init

Pull staging/IIO fixes from Greg KH:
 "Here are a number of small staging and IIO driver fixes for reported
  issues for 5.5-rc2

  Nothing major, a bunch of tiny IIO driver issues resolved, and some
  staging driver fixes for things that people ran into with 5.5-rc1.
  Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
  fbtft: Fix the initialization from property algorithm
  staging: rtl8712: fix interface sanity check
  staging: rtl8188eu: fix interface sanity check
  staging: gigaset: add endpoint-type sanity check
  staging: gigaset: fix illegal free on probe errors
  staging: gigaset: fix general protection fault on probe
  staging: vchiq: call unregister_chrdev_region() when driver registration fails
  staging: exfat: fix multiple definition error of `rename_file'
  staging/wlan-ng: add CRC32 dependency in Kconfig
  staging: hp100: Fix build error without ETHERNET
  staging: fbtft: Do not hardcode SPI CS polarity inversion
  staging: exfat: properly support discard in clr_alloc_bitmap()
  staging/octeon: Mark Ethernet driver as BROKEN
  iio: adc: max9611: Fix too short conversion time delay
  iio: ad7949: fix channels mixups
  iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
  iio: imu: st_lsm6dsx: fix decimation factor estimation
  iio: imu: inv_mpu6050: fix temperature reporting using bad unit
  iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
  ...

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for reported issues for 5.5-rc2

  There's the usual gadget and xhci fixes, as well as some other
  problems that syzbot has been finding during it's fuzzing runs. Full
  details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
  usb: dwc3: pci: add ID for the Intel Comet Lake -H variant
  xhci: make sure interrupts are restored to correct state
  xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.
  xhci: Increase STS_HALT timeout in xhci_suspend()
  usb: xhci: only set D3hot for pci device
  xhci: fix USB3 device initiated resume race with roothub autosuspend
  xhci: Fix memory leak in xhci_add_in_port()
  USB: Fix incorrect DMA allocations for local memory pool drivers
  usb: gadget: fix wrong endpoint desc
  usb: dwc3: ep0: Clear started flag on completion
  usb: dwc3: gadget: Clear started flag for non-IOC
  usb: dwc3: gadget: Fix logical condition
  USB: atm: ueagle-atm: add missing endpoint check
  USB: adutux: fix interface sanity check
  USB: idmouse: fix interface sanity checks
  USB: serial: io_edgeport: fix epic endpoint lookup
  usb: mon: Fix a deadlock in usbmon between mmap and read
  usb: common: usb-conn-gpio: Don't log an error on probe deferral
  usb: core: urb: fix URB structure initialization function
  usb: typec: fix use after free in typec_register_port()
  ...

Pull s390 updates from Vasily Gorbik:

 - Add support for KASAN_VMALLOC feature.

 - Remove the last user of problematic diag 0x44 call.

 - Adjust sampling interval and avoid sample data block overflow
   condition on pressure in perf code.

 - Prefer EOPNOTSUPP over ENOTSUPP and comments fixes.

* tag 's390-5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kasan: add KASAN_VMALLOC support
  s390: remove last diag 0x44 caller
  s390/uv: use EOPNOTSUPP instead of ENOTSUPP
  s390/cpum_sf: Avoid SBD overflow condition in irq handler
  s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits
  s390/test_unwind: fix spelling mistake "reqister" -> "register"
  s390/spinlock: remove confusing comment in arch_spin_lock_wait

Pull crypto fix from Herbert Xu:
 "Fix another build problem for Wireguard without Crypto"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arm/curve25519 - add arch-specific key generation function

Pull cfis fixes from Steve French:
 "Three small smb3 fixes: this addresses two recent issues reported in
  additional testing during rc1, a refcount underflow and a problem with
  an intermittent crash in SMB2_open_init"

* tag '5.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Close cached root handle only if it has a lease
  SMB3: Fix crash in SMB2_open_init due to uninitialized field in compounding path
  smb3: fix refcount underflow warning on unmount when no directory leases

Pull overlayfs fixes from Miklos Szeredi:
 "Fix some bugs and documentation"

* tag 'ovl-fixes-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  docs: filesystems: overlayfs: Fix restview warnings
  docs: filesystems: overlayfs: Rename overlayfs.txt to .rst
  ovl: relax WARN_ON() on rename to self
  ovl: fix corner case of non-unique st_dev;st_ino
  ovl: don't use a temp buf for encoding real fh
  ovl: make sure that real fid is 32bit aligned in memory
  ovl: fix lookup failure on multi lower squashfs

For BINDER_TYPE_PTR and BINDER_TYPE_FDA transactions, the
num_valid local was calculated incorrectly causing the
range check in binder_validate_ptr() to miss out-of-bounds
offsets.

Fixes: bde4a19f ("binder: use userspace pointer as base of buffer space")
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213202531.55010-1-tkjos@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull nios2 fix from Ley Foon Tan:
 "Fix nios2 ioremap regression"

* tag 'nios2-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: Fix ioremap

Pull Devicetree fixes from Rob Herring:

 - Fix for dependency tracking caused by unittest interaction

 - Fix some schema errors in Tegra memory controller schema

 - Update Maxime Ripard's email address

 - Review fixes to TI cpsw-switch

 - Add wakeup-source prop for STM32 rproc. Got dropped in the schema
   conversion.

* tag 'devicetree-fixes-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of/platform: Unconditionally pause/resume sync state during kernel init
  dt-bindings: memory-controllers: tegra: Fix type references
  dt-bindings: Change maintainer address
  dt-bindings: net: ti: cpsw-switch: update to fix comments
  dt-bindings: remoteproc: stm32: add wakeup-source property