- 26 Apr, 2023 7 commits
-
-
Marijn Suijten authored
These offsets do not fall under the MDP TOP block and do not fit the comment right above. Move them to dpu_hw_interrupts.c next to the repsective MDP_INTF_x_OFF interrupt block offsets. Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/534203/ Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-3-27ce1a5ab5c6@somainline.orgSigned-off-by:
-
Marijn Suijten authored
No hardware beyond kona (sm8250, DPU 6.0.0) defines the TE2 PINGPONG sub-block offset downstream, and according to insiders no DPU >= 5.0.0 hardware has support for it either. Especially since neither downstream nor upstream utilize these registers in any way, remove the erroneous specification from SM8150, SC8180X, SM8250, SC7180, SM8350, SC8280XP and SM8450 to prevent confusion. Note that downstream enables the PPSPLIT (split-FIFO) topology (single LM for 2 PP and 2 INTF) based on the presence of a TE2 block. Fixes: 386fced3 ("drm/msm/dpu: add SM8150 to hw catalog") Fixes: 7bdc0c4b ("msm:disp:dpu1: add support for display for SC7180 target") Fixes: 0e91bcbb ("drm/msm/dpu: Add SM8350 to hw catalog") Fixes: 4a352c2f ("drm/msm/dpu: Introduce SC8280XP") Fixes: 100d7ef6 ("drm/msm/dpu: add support for SM8450") Signed-off-by:
-
Marijn Suijten authored
Neither of these SoCs has INTF0, they only have a DSI interface on index 1. Stop enabling an interrupt that can't fire. Fixes: 3581b706 ("drm/msm/disp/dpu1: add support for display on SM6115") Fixes: 5334087e ("drm/msm: add support for QCM2290 MDSS") Signed-off-by:
-
Arnaud Vrac authored
Change lm blocks pairs so that lm blocks with the same features are paired together: LM_0 and LM_1 with PP and DSPP LM_2 and LM_5 with PP LM_3 and LM_4 This matches the sdm845 configuration and allows using pp or dspp when 2 lm blocks are needed in the topology. In the previous config the reservation code could never find an lm pair without a matching feature set. Signed-off-by:
Arnaud Vrac <avrac@freebox.fr> Fixes: 94391a14 ("drm/msm/dpu1: Add MSM8998 to hw catalog") Reviewed-by:
-
Arnaud Vrac authored
Match the values found in the downstream msm-4.4 kernel sde driver. Signed-off-by:
-
Marijn Suijten authored
The WB debug log mask ended up never being assigned, leading to writes to this block to never be logged even if the mask is enabled in dpu_hw_util_log_mask via debugfs. Fixes: 84a33d0f ("drm/msm/dpu: add dpu_hw_wb abstraction for writeback blocks") Signed-off-by:
-
Srinivas Kandagatla authored
while binding the code always registers a audio driver, however there is no corresponding unregistration done in unbind. This leads to multiple redundant audio platform devices if dp_display_bind and dp_display_unbind happens multiple times during startup. On X13s platform this resulted in 6 to 9 audio codec device instead of just 3 codec devices for 3 dp ports. Fix this by unregistering codecs on unbind. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: d13e36d7 ("drm/msm/dp: add audio support for Display Port on MSM") Reviewed-by:
-
- 24 Apr, 2023 2 commits
-
-
Rob Clark authored
Commit d6ae7d1c ("drm/msm/gem: Simplify vmap vs LRU tracking") introduced a splat in the pin_pages_locked() path for buffers that had been MADV_DONTNEED. ------------[ cut here ]------------ msm_obj->madv != 0 WARNING: CPU: 1 PID: 144 at drivers/gpu/drm/msm/msm_gem.c:230 msm_gem_pin_pages_locked+0x9c/0xd4 Modules linked in: lzo_rle cros_ec_lid_angle cros_ec_sensors cros_ec_sensors_core venus_dec venus_enc videobuf2_dma_contig cdc_ether usbnet mii uvcvideo videobuf2_vmalloc hci_uart btqca qcom_spmi_adc5 uvc qcom_spmi_temp_alarm qcom_vadc_common cros_ec_sensorhub videobuf2_memops cros_ec_typec sx9324 sx_common typec joydev bluetooth industrialio_triggered_buffer ecdh_generic kfifo_buf ecc venus_core qcom_stats v4l2_mem2mem videobuf2_v4l2 videobuf2_common ath11k_ahb ath11k mac80211 cfg80211 fuse zram zsmalloc CPU: 1 PID: 144 Comm: ring0 Tainted: G W 6.3.0-rc2-debug+ #622 Hardware name: Google Villager (rev1+) with LTE (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_gem_pin_pages_locked+0x9c/0xd4 lr : msm_gem_pin_pages_locked+0x9c/0xd4 sp : ffffffc009ffbab0 x29: ffffffc009ffbab0 x28: ffffffee8da75008 x27: ffffff80a10274d0 x26: ffffff8087fe3bf8 x25: ffffff8087fe3c08 x24: 0000000000000001 x23: ffffff80891d5800 x22: ffffff809d0de480 x21: ffffff8081e5a080 x20: 0000000000000002 x19: ffffff80a3564c00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000000a9620 x14: 0000000000000000 x13: 2d2d2d2d2d2d2d2d x12: 2d2d2d2d5d206572 x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : ffffffee8c705dfc x8 : ffffffee8da75000 x7 : ffffffee8d34e6d0 x6 : 0000000000000000 x5 : 00000000000affa8 x4 : 000000000000000d x3 : ffffffee8da75008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8088048040 Call trace: msm_gem_pin_pages_locked+0x9c/0xd4 get_vaddr+0xb0/0x150 msm_gem_get_vaddr_active+0x1c/0x28 snapshot_buf+0x90/0x10c msm_rd_dump_submit+0x30c/0x380 msm_gpu_submit+0x88/0x174 msm_job_run+0x68/0x118 drm_sched_main+0x2b8/0x3a0 kthread+0xf0/0x100 ret_from_fork+0x10/0x20 irq event stamp: 3358 hardirqs last enabled at (3357): [<ffffffee8c7051f4>] __up_console_sem+0x7c/0x80 hardirqs last disabled at (3358): [<ffffffee8d3480b0>] el1_dbg+0x24/0x80 softirqs last enabled at (3330): [<ffffffee8c610420>] __do_softirq+0x21c/0x4bc softirqs last disabled at (3325): [<ffffffee8c616708>] ____do_softirq+0x18/0x24 ---[ end trace 0000000000000000 ]--- But, as with msm_gem_get_vaddr_active(), this is a special case because we know that the buffer won't be purged evicted until it's fence is signaled. We just forgot to propagate the logic get_vaddr() to pin_pages_locked(). Fixes: d6ae7d1c ("drm/msm/gem: Simplify vmap vs LRU tracking") Signed-off-by:
Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/532616/ Link: https://lore.kernel.org/r/20230417225504.494934-1-robdclark@gmail.com
-
Rob Clark authored
For a similar reason as commit f2c7ca89 ("drm/atomic-helper: Don't set deadline for modesets"), we need the crtc to be already active in order to compute a target vblank time for an async commit. Otherwise we get this splat reminding us that we are doing it wrong: ------------[ cut here ]------------ msm_dpu ae01000.mdp: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev)) WARNING: CPU: 7 PID: 1923 at drivers/gpu/drm/drm_vblank.c:728 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x148/0x370 Modules linked in: snd_seq_dummy snd_seq snd_seq_device bridge stp llc tun vhost_vsock vhost vhost_iotlb vmw_vsock_virtio_transport_common vsock uinput rfcomm algif_hash algif_skcipher af_alg veth venus_dec venus_enc cros_ec_typec typec qcom_spmi_temp_alarm qcom_spmi_adc_tm5 qcom_spmi_adc5 xt_cgroup qcom_vadc_common qcom_stats hci_uart btqca xt_MASQUERADE venus_core 8021q coresight_tmc coresight_funnel coresight_etm4x coresight_replicator snd_soc_lpass_sc7180 coresight snd_soc_sc7180 ip6table_nat fuse ath10k_snoc ath10k_core ath mac80211 iio_trig_sysfs bluetooth cfg80211 cros_ec_sensors cros_ec_sensors_core ecdh_generic industrialio_triggered_buffer ecc kfifo_buf cros_ec_sensorhub r8153_ecm cdc_ether usbnet r8152 mii lzo_rle lzo_compress zram hid_vivaldi hid_google_hammer hid_vivaldi_common joydev CPU: 7 PID: 1923 Comm: DrmThread Not tainted 5.15.107-18853-g3be267609a0b-dirty #16 a1ffc1a66e79c21c3536d8c9a42e819236e39714 Hardware name: Google Wormdingler rev1+ BOE panel board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x148/0x370 lr : drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x144/0x370 sp : ffffffc012e2b800 x29: ffffffc012e2b840 x28: ffffff8083676094 x27: ffffffc012e2bb28 x26: ffffff8084539800 x25: 0000000000000000 x24: ffffff8083676000 x23: ffffffd3c8cdc5a0 x22: ffffff80845b9d00 x21: ffffffc012e2b8b4 x20: ffffffc012e2b910 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000010 x15: ffffffd3c8451a88 x14: 0000000000000003 x13: 0000000000000004 x12: 0000000000000001 x11: c0000000ffffdfff x10: ffffffd3c973ef58 x9 : 8ea3526b3cc95900 x8 : 8ea3526b3cc95900 x7 : 0000000000000000 x6 : 000000000000003a x5 : ffffffd3c99676cd x4 : 0000000000000000 x3 : ffffffc012e2b4b8 x2 : ffffffc012e2b4c0 x1 : 00000000ffffdfff x0 : 0000000000000000 Call trace: drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x148/0x370 drm_crtc_vblank_helper_get_vblank_timestamp+0x20/0x30 drm_crtc_get_last_vbltimestamp+0x68/0xb0 drm_crtc_next_vblank_start+0x5c/0xa8 msm_atomic_commit_tail+0x264/0x664 commit_tail+0xac/0x160 drm_atomic_helper_commit+0x160/0x168 drm_atomic_commit+0xfc/0x128 drm_atomic_helper_disable_plane+0x8c/0x110 __setplane_atomic+0x10c/0x138 drm_mode_cursor_common+0x3a8/0x410 drm_mode_cursor_ioctl+0x48/0x70 drm_ioctl_kernel+0xe0/0x158 drm_ioctl+0x25c/0x4d8 __arm64_sys_ioctl+0x98/0xd0 invoke_syscall+0x4c/0x100 el0_svc_common+0x98/0x104 do_el0_svc+0x30/0x90 el0_svc+0x20/0x50 el0t_64_sync_handler+0x78/0x108 el0t_64_sync+0x1a4/0x1a8 ---[ end trace a0f587e1ab9589e8 ]--- Fixes: 52ff0d30 ("drm/msm/atomic: Switch to vblank_start helper") Signed-off-by:
-
- 07 Apr, 2023 31 commits
-
-
Dmitry Baryshkov authored
Drop the version comparison macros from dpu_hw_catalog.h, they are unused. Signed-off-by:
-
Dmitry Baryshkov authored
In email discussion it was noted that there can be different SoC device having slightly different SoC features, but sharing the same DPU hw revision. Stop fetching catalog data using core_rev and use platform's match data instead. Signed-off-by:
-
Dmitry Baryshkov authored
IRQ masks are rarely shared between different DPU revisions. Inline them to the dpu_mdss_cfg intances and drop them from the dpu_hw_catalog.c Reviewed-by:
-
Dmitry Baryshkov authored
After fixing scaler version we are sure that sm8450 and sc8280xp vig sblk's are duplicates of sm8250_vig_sblk and thus can be dropped. Reviewed-by:
-
Dmitry Baryshkov authored
For sm8150+ the DPU_CTL_SPLIT_DISPLAY should be replaced with DPU_CTL_ACTIVE_CFG support (which supports having a single CTL for both interfaces in a split). Add comments where this conversion is required. Signed-off-by:
-
Dmitry Baryshkov authored
Use defined name DEFAULT_DPU_OUTPUT_LINE_WIDTH instead of open coding the value. Reviewed-by:
-
Dmitry Baryshkov authored
Duplicate sm8450 catalog entries to sm8550 to remove dependencies between DPU instances. Signed-off-by:
-
Dmitry Baryshkov authored
Duplicate qcm2290 catalog entries to sm6115 to remove dependencies between DPU instances. Signed-off-by:
-
Dmitry Baryshkov authored
Duplicate sm8250 catalog entries to sc7180 to remove dependencies between DPU instances. Signed-off-by:
-
Dmitry Baryshkov authored
Duplicate sm8150 catalog entries to sc8180x to remove dependencies between DPU instances. Signed-off-by:
-
Dmitry Baryshkov authored
Duplicate some of sm8350 catalog entries to remove dependencies between DPU major generations. Reviewed-by:
-
Dmitry Baryshkov authored
Duplicate some of sm8250 catalog entries to remove dependencies between DPU major generations. Reviewed-by:
-
Dmitry Baryshkov authored
Duplicate some of sm8150 catalog entries to remove dependencies between DPU major generations. Reviewed-by:
-
Dmitry Baryshkov authored
Duplicate some of sc7180 catalog entries to remove dependencies between DPU major generations. Reviewed-by:
-
Dmitry Baryshkov authored
Duplicate some of sdm845 catalog entries to remove dependencies between DPU major generations. Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
Reviewed-by:
-
Dmitry Baryshkov authored
UBWC and highest bank settings differ slightly between different DPU units of the same generation, while the dpu_caps and dpu_mdp_cfg are much more stable. To ease configuration reuse move ubwc_swizzle and highest_bank_bit data to separate structure. Reviewed-by:
-
Dmitry Baryshkov authored
Fix several leftover _pp strutures and mark them as const, making all hw catalog fit into the rodata section. Reviewed-by:
-
Dmitry Baryshkov authored
DSC hw catalog data is not supposed to be changed, so mark it as const data. Reviewed-by:
-
Konrad Dybcio authored
These blocks are of variable length on different SoCs. Set the correct values where I was able to retrieve it from downstream DTs and leave the old defaults (0x280) otherwise. Signed-off-by:
-
