- 02 Feb, 2016 40 commits
-
-
Sven Eckelmann authored
commit 44e8e7e9 upstream. The batadv_nc_node_free_ref function uses call_rcu to delay the free of the batadv_nc_node object until no (already started) rcu_read_lock is enabled anymore. This makes sure that no context is still trying to access the object which should be removed. But batadv_nc_node also contains a reference to orig_node which must be removed. The reference drop of orig_node was done in the call_rcu function batadv_nc_node_free_rcu but should actually be done in the batadv_nc_node_release function to avoid nested call_rcus. This is important because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will not detect the inner call_rcu as relevant for its execution. Otherwise this barrier will most likely be inserted in the queue before the callback of the first call_rcu was executed. The caller of rcu_barrier will therefore continue to run before the inner call_rcu callback finished. Fixes: d56b1705 ("batman-adv: network coding - detect coding nodes and remove these after timeout") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Sven Eckelmann authored
commit 63b39927 upstream. The batadv_claim_free_ref function uses call_rcu to delay the free of the batadv_bla_claim object until no (already started) rcu_read_lock is enabled anymore. This makes sure that no context is still trying to access the object which should be removed. But batadv_bla_claim also contains a reference to backbone_gw which must be removed. The reference drop of backbone_gw was done in the call_rcu function batadv_claim_free_rcu but should actually be done in the batadv_claim_release function to avoid nested call_rcus. This is important because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will not detect the inner call_rcu as relevant for its execution. Otherwise this barrier will most likely be inserted in the queue before the callback of the first call_rcu was executed. The caller of rcu_barrier will therefore continue to run before the inner call_rcu callback finished. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Nikolay Aleksandrov authored
commit c6894dec upstream. After promisc mode management was introduced a bridge device could do dev_set_promiscuity from its ndo_change_rx_flags() callback which in turn can be called after the bridge's addr_list_lock has been taken (e.g. by dev_uc_add). This causes a false positive lockdep splat because the port interfaces' addr_list_lock is taken when br_manage_promisc() runs after the bridge's addr list lock was already taken. To remove the false positive introduce a custom bridge addr_list_lock class and set it on bridge init. A simple way to reproduce this is with the following: $ brctl addbr br0 $ ip l add l br0 br0.100 type vlan id 100 $ ip l set br0 up $ ip l set br0.100 up $ echo 1 > /sys/class/net/br0/bridge/vlan_filtering $ brctl addif br0 eth0 Splat: [ 43.684325] ============================================= [ 43.684485] [ INFO: possible recursive locking detected ] [ 43.684636] 4.4.0-rc8+ #54 Not tainted [ 43.684755] --------------------------------------------- [ 43.684906] brctl/1187 is trying to acquire lock: [ 43.685047] (_xmit_ETHER){+.....}, at: [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.685460] but task is already holding lock: [ 43.685618] (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.686015] other info that might help us debug this: [ 43.686316] Possible unsafe locking scenario: [ 43.686743] CPU0 [ 43.686967] ---- [ 43.687197] lock(_xmit_ETHER); [ 43.687544] lock(_xmit_ETHER); [ 43.687886] *** DEADLOCK *** [ 43.688438] May be due to missing lock nesting notation [ 43.688882] 2 locks held by brctl/1187: [ 43.689134] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81510317>] rtnl_lock+0x17/0x20 [ 43.689852] #1: (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.690575] stack backtrace: [ 43.690970] CPU: 0 PID: 1187 Comm: brctl Not tainted 4.4.0-rc8+ #54 [ 43.691270] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 43.691770] ffffffff826a25c0 ffff8800369fb8e0 ffffffff81360ceb ffffffff826a25c0 [ 43.692425] ffff8800369fb9b8 ffffffff810d0466 ffff8800369fb968 ffffffff81537139 [ 43.693071] ffff88003a08c880 0000000000000000 00000000ffffffff 0000000002080020 [ 43.693709] Call Trace: [ 43.693931] [<ffffffff81360ceb>] dump_stack+0x4b/0x70 [ 43.694199] [<ffffffff810d0466>] __lock_acquire+0x1e46/0x1e90 [ 43.694483] [<ffffffff81537139>] ? netlink_broadcast_filtered+0x139/0x3e0 [ 43.694789] [<ffffffff8153b5da>] ? nlmsg_notify+0x5a/0xc0 [ 43.695064] [<ffffffff810d10f5>] lock_acquire+0xe5/0x1f0 [ 43.695340] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.695623] [<ffffffff815edea5>] _raw_spin_lock_bh+0x45/0x80 [ 43.695901] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.696180] [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.696460] [<ffffffff8150189c>] dev_set_promiscuity+0x3c/0x50 [ 43.696750] [<ffffffffa0586845>] br_port_set_promisc+0x25/0x50 [bridge] [ 43.697052] [<ffffffffa05869aa>] br_manage_promisc+0x8a/0xe0 [bridge] [ 43.697348] [<ffffffffa05826ee>] br_dev_change_rx_flags+0x1e/0x20 [bridge] [ 43.697655] [<ffffffff81501532>] __dev_set_promiscuity+0x132/0x1f0 [ 43.697943] [<ffffffff81501672>] __dev_set_rx_mode+0x82/0x90 [ 43.698223] [<ffffffff815072de>] dev_uc_add+0x5e/0x80 [ 43.698498] [<ffffffffa05b3c62>] vlan_device_event+0x542/0x650 [8021q] [ 43.698798] [<ffffffff8109886d>] notifier_call_chain+0x5d/0x80 [ 43.699083] [<ffffffff810988b6>] raw_notifier_call_chain+0x16/0x20 [ 43.699374] [<ffffffff814f456e>] call_netdevice_notifiers_info+0x6e/0x80 [ 43.699678] [<ffffffff814f4596>] call_netdevice_notifiers+0x16/0x20 [ 43.699973] [<ffffffffa05872be>] br_add_if+0x47e/0x4c0 [bridge] [ 43.700259] [<ffffffffa058801e>] add_del_if+0x6e/0x80 [bridge] [ 43.700548] [<ffffffffa0588b5f>] br_dev_ioctl+0xaf/0xc0 [bridge] [ 43.700836] [<ffffffff8151a7ac>] dev_ifsioc+0x30c/0x3c0 [ 43.701106] [<ffffffff8151aac9>] dev_ioctl+0xf9/0x6f0 [ 43.701379] [<ffffffff81254345>] ? mntput_no_expire+0x5/0x450 [ 43.701665] [<ffffffff812543ee>] ? mntput_no_expire+0xae/0x450 [ 43.701947] [<ffffffff814d7b02>] sock_do_ioctl+0x42/0x50 [ 43.702219] [<ffffffff814d8175>] sock_ioctl+0x1e5/0x290 [ 43.702500] [<ffffffff81242d0b>] do_vfs_ioctl+0x2cb/0x5c0 [ 43.702771] [<ffffffff81243079>] SyS_ioctl+0x79/0x90 [ 43.703033] [<ffffffff815eebb6>] entry_SYSCALL_64_fastpath+0x16/0x7a CC: Vlad Yasevich <vyasevic@redhat.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Bridge list <bridge@lists.linux-foundation.org> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode.") Reported-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Dan Carpenter authored
commit 0dc924c5 upstream. If we return 1 here, then the caller treats it as an error and returns -EINVAL. It causes a static checker warning to treat positive returns as an error. Fixes: 1aba86d6 ('Btrfs: fix easily get into ENOSPC in mixed case') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Russell King authored
commit d9812780 upstream. The SD card specification allows cards to error out a SWITCH command where the requested function in a group is not supported. The spec provides for a set of capabilities which indicate which functions are supported. In the case of the power limit, requesting an unsupported power level via the SWITCH command fails, resulting in the power level remaining at the power-on default of 0.72W, even though the host and card may support higher powers levels. This has been seen with SanDisk 8GB cards, which support the default 0.72W and 1.44W (200mA and 400mA) in combination with an iMX6 host, supporting up to 2.88W (800mA). This currently causes us to try to set a power limit function value of '3' (2.88W) which the card errors out on, and thereby causes the power level to remain at 0.72W rather than the desired 1.44W. Arrange to limit the selected current limit by the capabilities reported by the card to avoid the SWITCH command failing. Select the highest current limit that the host and card combination support. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Fixes: a39ca6ae ("mmc: core: Simplify and fix for SD switch processing") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Eric Dumazet authored
commit 3e4006f0 upstream. When first SYNACK is sent, we already hold rcu_read_lock(), but this is not true if a SYNACK is retransmitted, as a timer (soft) interrupt does not hold rcu_read_lock() Fixes: 45f6fad8 ("ipv6: add complete rcu protection around np->opt") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Mickaël Salaün authored
commit 42d91f61 upstream. Fix build error by generating elfcore.o only when ELF_CORE (depending on COREDUMP) is selected: arch/x86/um/built-in.o: In function `elf_core_write_extra_phdrs': (.text+0x3e62): undefined reference to `dump_emit' arch/x86/um/built-in.o: In function `elf_core_write_extra_data': (.text+0x3eef): undefined reference to `dump_emit' Fixes: 5d2acfc7 ("kconfig: make allnoconfig disable options behind EMBEDDED and EXPERT") Signed-off-by:
Mickaël Salaün <mic@digikod.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Bart Van Assche authored
commit f0a8afec upstream. strsep() modifies its first argument. Make the pointer passed to kfree() match the return value of kmalloc(). Fixes: 229d4f11 (commit "target_core_alua: Referrals configfs integration") Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Brian Norris authored
commit 715780ae upstream. The kerneldoc for request_firmware_nowait() says that it may call the provided cont() callback with @fw == NULL, if the firmware request fails. However, this is not the case when called with an empty string (""). This case is short-circuited by the 'name[0] == '\0'' check introduced in commit 471b095d ("firmware_class: make sure fw requests contain a name"), so _request_firmware() never gets to set the fw to NULL. Noticed while using the new 'trigger_async_request' testing hook: # printf '\x00' > /sys/devices/virtual/misc/test_firmware/trigger_async_request [10553.726178] test_firmware: loading '' [10553.729859] test_firmware: loaded: 995209091 # printf '\x00' > /sys/devices/virtual/misc/test_firmware/trigger_async_request [10733.676184] test_firmware: loading '' [10733.679855] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [10733.687951] pgd = ec188000 [10733.690655] [00000004] *pgd=00000000 [10733.694240] Internal error: Oops: 5 [#1] SMP ARM [10733.698847] Modules linked in: btmrvl_sdio btmrvl bluetooth sbs_battery nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables asix usbnet mwifiex_sdio mwifiex cfg80211 jitterentropy_rng drbg joydev snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun [10733.725670] CPU: 0 PID: 6600 Comm: bash Not tainted 4.4.0-rc4-00351-g63d0877 #178 [10733.733137] Hardware name: Rockchip (Device Tree) [10733.737831] task: ed24f6c0 ti: ee322000 task.ti: ee322000 [10733.743222] PC is at do_raw_spin_lock+0x18/0x1a0 [10733.747831] LR is at _raw_spin_lock+0x18/0x1c [10733.752180] pc : [<c00653a0>] lr : [<c054c204>] psr: a00d0013 [10733.752180] sp : ee323df8 ip : ee323e20 fp : ee323e1c [10733.763634] r10: 00000051 r9 : b6f18000 r8 : ee323f80 [10733.768847] r7 : c089cebc r6 : 00000001 r5 : 00000000 r4 : ec0e6000 [10733.775360] r3 : dead4ead r2 : c06bd140 r1 : eef913b4 r0 : 00000000 [10733.781874] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [10733.788995] Control: 10c5387d Table: 2c18806a DAC: 00000051 [10733.794728] Process bash (pid: 6600, stack limit = 0xee322218) [10733.800549] Stack: (0xee323df8 to 0xee324000) [10733.804896] 3de0: ec0e6000 00000000 [10733.813059] 3e00: 00000001 c089cebc ee323f80 b6f18000 ee323e2c ee323e20 c054c204 c0065394 [10733.821221] 3e20: ee323e44 ee323e30 c02fec60 c054c1f8 ec0e7ec0 ec3fcfc0 ee323e5c ee323e48 [10733.829384] 3e40: c02fed08 c02fec48 c07dbf74 eeb05a00 ee323e8c ee323e60 c0253828 c02fecac [10733.837547] 3e60: 00000001 c0116950 ee323eac ee323e78 00000001 ec3fce00 ed2d9700 ed2d970c [10733.845710] 3e80: ee323e9c ee323e90 c02e873c c02537d4 ee323eac ee323ea0 c017bd40 c02e8720 [10733.853873] 3ea0: ee323ee4 ee323eb0 c017b250 c017bd00 00000000 00000000 f3e47a54 ec128b00 [10733.862035] 3ec0: c017b10c ee323f80 00000001 c000f504 ee322000 00000000 ee323f4c ee323ee8 [10733.870197] 3ee0: c011b71c c017b118 ee323fb0 c011bc90 becfa8d9 00000001 ec128b00 00000001 [10733.878359] 3f00: b6f18000 ee323f80 ee323f4c ee323f18 c011bc90 c0063950 ee323f3c ee323f28 [10733.886522] 3f20: c0063950 c0549138 00000001 ec128b00 00000001 ec128b00 b6f18000 ee323f80 [10733.894684] 3f40: ee323f7c ee323f50 c011bed8 c011b6ec c0135fb8 c0135f24 ec128b00 ec128b00 [10733.902847] 3f60: 00000001 b6f18000 c000f504 ee322000 ee323fa4 ee323f80 c011c664 c011be24 [10733.911009] 3f80: 00000000 00000000 00000001 b6f18000 b6e79be0 00000004 00000000 ee323fa8 [10733.919172] 3fa0: c000f340 c011c618 00000001 b6f18000 00000001 b6f18000 00000001 00000000 [10733.927334] 3fc0: 00000001 b6f18000 b6e79be0 00000004 00000001 00000001 8068a3f1 b6e79c84 [10733.935496] 3fe0: 00000000 becfa7dc b6de194d b6e20246 400d0030 00000001 7a4536e8 49bda390 [10733.943664] [<c00653a0>] (do_raw_spin_lock) from [<c054c204>] (_raw_spin_lock+0x18/0x1c) [10733.951743] [<c054c204>] (_raw_spin_lock) from [<c02fec60>] (fw_free_buf+0x24/0x64) [10733.959388] [<c02fec60>] (fw_free_buf) from [<c02fed08>] (release_firmware+0x68/0x74) [10733.967207] [<c02fed08>] (release_firmware) from [<c0253828>] (trigger_async_request_store+0x60/0x124) [10733.976501] [<c0253828>] (trigger_async_request_store) from [<c02e873c>] (dev_attr_store+0x28/0x34) [10733.985533] [<c02e873c>] (dev_attr_store) from [<c017bd40>] (sysfs_kf_write+0x4c/0x58) [10733.993437] [<c017bd40>] (sysfs_kf_write) from [<c017b250>] (kernfs_fop_write+0x144/0x1a8) [10734.001689] [<c017b250>] (kernfs_fop_write) from [<c011b71c>] (__vfs_write+0x3c/0xe4) After this patch: # printf '\x00' > /sys/devices/virtual/misc/test_firmware/trigger_async_request [ 32.126322] test_firmware: loading '' [ 32.129995] test_firmware: failed to async load firmware -bash: printf: write error: No such device Fixes: 471b095d ("firmware_class: make sure fw requests contain a name") Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Ming Lei <ming.lei@canonical.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Sasha Levin authored
commit 6b9140f3 upstream. Writing 0 length data into test_power makes it access an invalid array location and kill the system. Fixes: f17ef9b2 ("power: Make test_power driver more dynamic.") Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Stephane Eranian authored
commit 61b87cae upstream. This patch fixes a bug in the filter_events() function. The patch fixes the bug whereby if some mappings did not exist, e.g., STALLED_CYCLES_FRONTEND, then any event after it in the attrs array would disappear from the published list of events in /sys/devices/cpu/events. This could be verified easily on any system post SNB (which do not publish STALLED_CYCLES_FRONTEND): $ ./perf stat -e cycles,ref-cycles true Performance counter stats for 'true': 1,217,348 cycles <not supported> ref-cycles The problem is that in filter_events() there is an assumption that the argument (attrs) is organized in increasing continuous event indexes related to the event_map(). But if we remove the non-supported events by shifing the position in the array, then the lookup x86_pmu.event_map() needs to compensate for it, otherwise we are looking up the wrong index. This patch corrects this problem by compensating for the deleted events and with that ref-cycles reappears (here shown on Haswell): $ perf stat -e ref-cycles,cycles true Performance counter stats for 'true': 4,525,910 ref-cycles 1,064,920 cycles 0.002943888 seconds time elapsed Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: jolsa@kernel.org Cc: kan.liang@intel.com Fixes: 8300daa2 ("perf/x86: Filter out undefined events from sysfs events attribute") Link: http://lkml.kernel.org/r/1449516805-6637-1-git-send-email-eranian@google.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Vegard Nossum authored
commit aab24a89 upstream. menu_is_visible() is a bool function and should use boolean return values. "no" is a tristate value which happens to also have a value of 0, but we should nevertheless use the right symbol for it. This is a very minor cleanup with no semantic change. Fixes: 86e187ff ("kconfig: add an option to determine a menu's visibility") Cc: Arnaud Lacombe <lacombar@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Ani Sinha authored
commit 984cf355 upstream. Commit 984d74a7 ("sysrq: rcu-ify __handle_sysrq") replaced spin_lock_irqsave() calls with rcu_read_lock() calls in sysrq. Since rcu_read_lock() does not disable preemption, faulthandler_disabled() in __do_page_fault() in x86/fault.c returns false. When the code later calls might_sleep() in the pagefault handler, we get the following warning: BUG: sleeping function called from invalid context at ../arch/x86/mm/fault.c:1187 in_atomic(): 0, irqs_disabled(): 0, pid: 4706, name: bash Preemption disabled at:[<ffffffff81484339>] printk+0x48/0x4a To fix this, we release the RCU read lock before we crash. Tested this patch on linux 3.18 by booting off one of our boards. Fixes: 984d74a7 ("sysrq: rcu-ify __handle_sysrq") Signed-off-by:
Ani Sinha <ani@arista.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Jan Beulich authored
commit 0d430e3f upstream. This was meant to print base address and entry count; make it do so again. Fixes: 37868fe1 "x86/ldt: Make modify_ldt synchronous" Signed-off-by:
Jan Beulich <jbeulich@suse.com> Acked-by:
Andy Lutomirski <luto@kernel.org> Link: http://lkml.kernel.org/r/56797D8402000078000C24F0@prv-mh.provo.novell.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Stefan Wahren authored
commit 53653c6b upstream. In case of an invalid pin value bcm2835_pctl_dt_node_to_map() would leak the pull configs of already assigned pins. So avoid this by calling the free map function in error case. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: e1b2dc70 ("pinctrl: add bcm2835 driver") Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> [ luis: backported to 3.16: - file rename: drivers/pinctrl/bcm/pinctrl-bcm2835.c -> drivers/pinctrl/pinctrl-bcm2835.c ] Signed-off-by:
-
Andy Shevchenko authored
commit dbec6719 upstream. The commit d7ba858a (ALSA: fm801: implement TEA575x tuner autodetection) brings autodetection to the driver. However the autodetection algorithm misses the TUNER_ONLY bit if it is supplied by the user. Thus, user gets weird messages and no card registered. snd_fm801 0000:0d:01.0: detected TEA575x radio type SF64-PCR snd_fm801 0000:0d:01.0: AC'97 interface is busy (1) snd_fm801 0000:0d:01.0: AC'97 interface is busy (1) ... snd_fm801 0000:0d:01.0: AC'97 0 does not respond - RESET snd_fm801 0000:0d:01.0: AC'97 interface is busy (1) snd_fm801 0000:0d:01.0: AC'97 interface is busy (1) snd_fm801 0000:0d:01.0: AC'97 0 access is not valid [0x0], removing mixer. snd_fm801: probe of 0000:0d:01.0 failed with error -5 Do a copy of TUNER_ONLY bit to be applied after autodetection is done. Fixes: d7ba858a (ALSA: fm801: implement TEA575x tuner autodetection) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Boris BREZILLON authored
commit 8142b47e upstream. Nobody uses the get_platform_nandchip() helper function which is supposed to return a pointer to a platform_nand_chip struct from an mtd_info pointer. Moreover, this function is buggy since the introduction of the plat_nand layer (chip->priv is now storing a pointer to an intermediate plat_nand_data structure allocated in plat_nand_probe(), and we have no way to retrieve a pointer to the provided platform_nand_chip struct from this plat_nand_data pointer). While we are at it, remove the useless (and buggy, since it's pointing to something stored on the stack) data->chip.priv assignment. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 711fdf62 ("[MTD] [NAND] platform NAND driver: add driver") Cc: Vitaly Wool <vitalywool@gmail.com> Signed-off-by:
-
Boris BREZILLON authored
commit 320092a0 upstream. Unregister the NAND device from the NAND subsystem when removing a denali NAND controller, otherwise the MTD attached to the NAND device is still exposed by the MTD layer, and accesses to this device will likely crash the system. Fixes: 2a0a288e ("mtd: denali: split the generic driver and PCI layer") Signed-off-by:
Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by:
-
Boris BREZILLON authored
commit de64aa9e upstream. src_ssync_features field is only 1 byte large, and the 4th reserved area is actually 8 bytes large. Fixes: d1e1f4e4 ("mtd: nand: add support for reading ONFI parameters from NAND device") Signed-off-by:
-
Dan Carpenter authored
commit 3a318426 upstream. We check for overflow here, but we don't check for underflow so it causes a static checker warning. Fixes: fb9987d0 ('ath9k_htc: Support for AR9271 chipset.') Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
commit 2dd52d7f upstream. quadfs_pll_fs660c32_round_rate prints a few structure members that are never initialized, and also doesn't print the only one it cares about. We get a gcc warning about the ones that are printed: clk/st/clkgen-fsyn.c:560:93: warning: 'params.sdiv' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.mdiv' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.pe' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.nsdiv' may be used uninitialized in this function This changes the code to no longer print uninitialized data, and for good measure it also prints the ndiv member that is being set. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 5f7aa907 ("clk: st: Support for QUADFS inside ClockGenB/C/D/E/F") Acked-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Loc Ho authored
commit 1382ea63 upstream. The X-Gene clock driver missed the divider shift operation when set the divider value. Signed-off-by:
Loc Ho <lho@apm.com> Fixes: 308964ca ("clk: Add APM X-Gene SoC clock driver") Signed-off-by:
-
Arnd Bergmann authored
commit d282e2b3 upstream. The initio driver has for many years had two copies of the same module device table. One of them is also used for registering the other driver, the other one is entirely useless after the large scale cleanup that Alan Cox did back in 2007. The compiler warns about this whenever the driver is built-in: drivers/scsi/initio.c:131:29: warning: 'i91u_pci_devices' defined but not used [-Wunused-variable] This removes the extraneous table and the warning. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Russell King authored
commit 2ff56fad upstream. rc-main mistakenly uses #ifdef MODULE to determine whether it should load the rc keymap modules. This symbol is only defined if rc-main is being built as a module itself, and bears no relation to whether the rc keymaps are modules. Fix this to use CONFIG_MODULES instead. Fixes: 631493ec ("[media] rc-core: merge rc-map.c into rc-main.c") Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Lukas Wunner authored
commit dcb1394e upstream. Currently when allocating a framebuffer fails, the gem object gets unrefed at the bottom of the call stack in __intel_framebuffer_create, not where it gets refed, which is in intel_framebuffer_create_for_mode (via i915_gem_alloc_object) and in intel_user_framebuffer_create (via drm_gem_object_lookup). This invites mistakes: __intel_framebuffer_create is also called from intelfb_alloc, and as discovered by Tvrtko Ursulin, a double unref was introduced there with a8bb6818 ("drm/i915: Fix error path leak in fbdev fb allocation"). As suggested by Ville Syrjälä, fix the double unref and improve code clarity by moving the unref away from __intel_framebuffer_create to where the gem object gets refed. Based on Tvrtko Ursulin's original v2. v3: On fb alloc failure, unref gem object where it gets refed, fix double unref in separate commit (Ville Syrjälä) v4: Lock struct_mutex on unref (Chris Wilson) v5: Rebase on drm-intel-nightly 2015y-09m-01d-09h-06m-08s UTC, rephrase commit message (Jani Nicula) Tested-by:
Pierre Moreau <pierre.morrow@free.fr> [MBP 5,3 2009 nvidia MCP79 + G96 pre-retina] Tested-by:
Paul Hordiienko <pvt.gord@gmail.com> [MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina] Tested-by:
William Brown <william@blackhats.net.au> [MBP 8,2 2011 intel SNB + amd turks pre-retina] Tested-by:
Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina] Tested-by:
Bruno Bierbaumer <bruno@bierbaumer.net> [MBP 11,3 2013 intel HSW + nvidia GK107 retina] Fixes: a8bb6818 ("drm/i915: Fix error path leak in fbdev fb allocation") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/2161c5062ef5d6458f8ae14d924a26d4d1dba317.1446892879.git.lukas@wunner.deSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Alexey Khoroshilov authored
commit 6ccb81f2 upstream. Since a8bb6818 __intel_framebuffer_create() is called with struct_mutex held, so it should use drm_gem_object_unreference() instead of drm_gem_object_unreference_unlocked(). Found by Linux Driver Verification project (linuxtesting.org). This regression has been introduced in commit a8bb6818 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Feb 10 18:00:39 2014 +0100 drm/i915: Fix error path leak in fbdev fb allocation Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Josh Boyer authored
commit 6b31de3e upstream. Like the Yoga 900 models the Lenovo Yoga 700 does not have a hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. This commit adds the Lenovo Yoga 700 to the no_hw_rfkill dmi list, fixing the wifi breakage. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1295272 Tested-by: <dinyar.rabady+spam@gmail.com> Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Rich Felker authored
commit 114bf37e upstream. Add Yoshinori Sato and Rich Felker as maintainers for arch/sh (SUPERH). Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by:
D. Jeff Dionne <jeff@uClinux.org> Acked-by:
Rob Landley <rob@landley.net> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tariq Saeed authored
commit b1b1e15e upstream. NFS on a 2 node ocfs2 cluster each node exporting dir. The lock causing the hang is the global bit map inode lock. Node 1 is master, has the lock granted in PR mode; Node 2 is in the converting list (PR -> EX). There are no holders of the lock on the master node so it should downconvert to NL and grant EX to node 2 but that does not happen. BLOCKED + QUEUED in lock res are set and it is on osb blocked list. Threads are waiting in __ocfs2_cluster_lock on BLOCKED. One thread wants EX, rest want PR. So it is as though the downconvert thread needs to be kicked to complete the conv. The hang is caused by an EX req coming into __ocfs2_cluster_lock on the heels of a PR req after it sets BUSY (drops l_lock, releasing EX thread), forcing the incoming EX to wait on BUSY without doing anything. PR has called ocfs2_dlm_lock, which sets the node 1 lock from NL -> PR, queues ast. At this time, upconvert (PR ->EX) arrives from node 2, finds conflict with node 1 lock in PR, so the lock res is put on dlm thread's dirty listt. After ret from ocf2_dlm_lock, PR thread now waits behind EX on BUSY till awoken by ast. Now it is dlm_thread that serially runs dlm_shuffle_lists, ast, bast, in that order. dlm_shuffle_lists ques a bast on behalf of node 2 (which will be run by dlm_thread right after the ast). ast does its part, sets UPCONVERT_FINISHING, clears BUSY and wakes its waiters. Next, dlm_thread runs bast. It sets BLOCKED and kicks dc thread. dc thread runs ocfs2_unblock_lock, but since UPCONVERT_FINISHING set, skips doing anything and reques. Inside of __ocfs2_cluster_lock, since EX has been waiting on BUSY ahead of PR, it wakes up first, finds BLOCKED set and skips doing anything but clearing UPCONVERT_FINISHING (which was actually "meant" for the PR thread), and this time waits on BLOCKED. Next, the PR thread comes out of wait but since UPCONVERT_FINISHING is not set, it skips updating the l_ro_holders and goes straight to wait on BLOCKED. So there, we have a hang! Threads in __ocfs2_cluster_lock wait on BLOCKED, lock res in osb blocked list. Only when dc thread is awoken, it will run ocfs2_unblock_lock and things will unhang. One way to fix this is to wake the dc thread on the flag after clearing UPCONVERT_FINISHING Orabug: 20933419 Signed-off-by:
Tariq Saeed <tariq.x.saeed@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by:
Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Signed-off-by:
-
Takashi Iwai authored
commit 230323da upstream. Currently ALSA timer device doesn't take the disconnection into account very well; it merely unlinks the timer device at disconnection callback but does nothing else. Because of this, when an application accessing the timer device is disconnected, it may release the resource before actually closed. In most cases, it results in a warning message indicating a leftover timer instance like: ALSA: timer xxxx is busy? But basically this is an open race. This patch tries to address it. The strategy is like other ALSA devices: namely, - Manage card's refcount at each open/close - Wake up the pending tasks at disconnection - Check the shutdown flag appropriately at each possible call Note that this patch has one ugly hack to handle the wakeup of pending tasks. It'd be cleaner to introduce a new disconnect op to snd_timer_instance ops. But since it would lead to internal ABI breakage and it eventually increase my own work when backporting to stable kernels, I took a different path to implement locally in timer.c. A cleanup patch will follow at next for 4.5 kernel. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431Signed-off-by:
-
Nicholas Bellinger authored
commit 26a99c19 upstream. This patch is a iscsi-target specific bug-fix for a dead-lock that can occur during explicit struct se_node_acl->acl_group se_session deletion via configfs rmdir(2), when iscsi-target time2retain timer is still active. It changes iscsi-target to obtain se_portal_group->session_lock internally using spin_in_locked() to check for the specific se_node_acl configfs shutdown rmdir(2) case. Note this patch is intended for stable, and the subsequent v4.5-rc patch converts target_core_tpg.c to use proper se_sess->sess_kref reference counting for both se_node_acl deletion + se_node_acl->queue_depth se_session restart. Reported-by:
: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Josh Boyer authored
commit edde316a upstream. One of the newest ideapad models also lacks a physical hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. Fix it by adding this model to the DMI list. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1286293Signed-off-by:
-
Vinit Agnihotri authored
commit fbbeb863 upstream. The current code is problematic when the QP creation and ipoib is used to support NFS and NFS desires to do IO for paging purposes. In that case, the GFP_KERNEL allocation in qib_qp.c causes a deadlock in tight memory situations. This fix adds support to create queue pair with GFP_NOIO flag for connected mode only to cleanly fail the create queue pair in those situations. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 09dc9cd6 upstream. The code produces the following trace: [1750924.419007] general protection fault: 0000 [#3] SMP [1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4 dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core [1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D 3.13.0-39-generic #66-Ubuntu [1750924.420364] Hardware name: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007 [1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti: ffff88007af1c000 [1750924.420364] RIP: 0010:[<ffffffffa0131d51>] [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.420364] RSP: 0018:ffff88007af1dd70 EFLAGS: 00010246 [1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX: 000000000000000f [1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI: 6764697200000000 [1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09: 0000000000000000 [1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12: ffff88007baa1d98 [1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15: 0000000000000000 [1750924.420364] FS: 00007ffff7fd8740(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 [1750924.420364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4: 00000000000007e0 [1750924.420364] Stack: [1750924.420364] ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429 000000007af1de20 [1750924.420364] ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70 ffffffffa00cb313 [1750924.420364] 00007fffffffde88 0000000000000000 0000000000000008 ffff88003ecab000 [1750924.420364] Call Trace: [1750924.420364] [<ffffffffa0132429>] qib_multicast_detach+0x1e9/0x350 [ib_qib] [1750924.568035] [<ffffffffa00cb313>] ? ib_uverbs_modify_qp+0x323/0x3d0 [ib_uverbs] [1750924.568035] [<ffffffffa0092d61>] ib_detach_mcast+0x31/0x50 [ib_core] [1750924.568035] [<ffffffffa00cc213>] ib_uverbs_detach_mcast+0x93/0x170 [ib_uverbs] [1750924.568035] [<ffffffffa00c61f6>] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs] [1750924.568035] [<ffffffff81312e68>] ? apparmor_file_permission+0x18/0x20 [1750924.568035] [<ffffffff812d4cd3>] ? security_file_permission+0x23/0xa0 [1750924.568035] [<ffffffff811bd214>] vfs_write+0xb4/0x1f0 [1750924.568035] [<ffffffff811bdc49>] SyS_write+0x49/0xa0 [1750924.568035] [<ffffffff8172f7ed>] system_call_fastpath+0x1a/0x1f [1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10 <f0> ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f [1750924.568035] RIP [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.568035] RSP <ffff88007af1dd70> [1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ] The fix is to note the qib_mcast_qp that was found. If none is found, then return EINVAL indicating the error. Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Jean Delvare authored
commit fd7f6727 upstream. I don't think it makes sense for a module to have a soft dependency on itself. This seems quite cyclic by nature and I can't see what purpose it could serve. OTOH libcrc32c calls crypto_alloc_shash("crc32c", 0, 0) so it pretty much assumes that some incarnation of the "crc32c" hash algorithm has been loaded. Therefore it makes sense to have the soft dependency there (as crc-t10dif does.) Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
commit 4f0414e5 upstream. We need to load the TX SG list in sendmsg(2) after waiting for incoming data, not before. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Takashi Iwai authored
commit c0bcdbdf upstream. When a TLV ioctl with numid zero is handled, the driver may spew a kernel warning with a stack trace at each call. The check was intended obviously only for a kernel driver, but not for a user interaction. Let's fix it. This was spotted by syzkaller fuzzer. Reported-by:
-
Nicolas Boichat authored
commit 9586495d upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_seq_port_info32 to a struct snd_seq_port_info, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
-
Nicolas Boichat authored
commit 43c54b8c upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_pcm_hw_params32 to a struct snd_pcm_hw_params, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. This actually leads to an out-of-bounds memory access later on in sound/soc/soc-pcm.c:soc_pcm_hw_params() (detected using KASan). Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by:
-
Takashi Iwai authored
commit 2ba1fe7a upstream. hrtimer_cancel() waits for the completion from the callback, thus it must not be called inside the callback itself. This was already a problem in the past with ALSA hrtimer driver, and the early commit [fcfdebe7: ALSA: hrtimer - Fix lock-up] tried to address it. However, the previous fix is still insufficient: it may still cause a lockup when the ALSA timer instance reprograms itself in its callback. Then it invokes the start function even in snd_timer_interrupt() that is called in hrtimer callback itself, results in a CPU stall. This is no hypothetical problem but actually triggered by syzkaller fuzzer. This patch tries to fix the issue again. Now we call hrtimer_try_to_cancel() at both start and stop functions so that it won't fall into a deadlock, yet giving some chance to cancel the queue if the functions have been called outside the callback. The proper hrtimer_cancel() is called in anyway at closing, so this should be enough. Reported-and-tested-by:
-
