- 17 Sep, 2004 40 commits
-
-
Hirokazu Takata authored
Here is a patch to slim arch/m32r/Kconfig. Useless CONFIG_ options are removed for m32r. Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Hirokazu Takata authored
This patch updates drivers/net/ne.c and merges m32r support to it. - Add m32r support. Signed-off-by:
Hayato Fujiwara <fujiwara@linux-m32r.org> Signed-off-by:
-
Hirokazu Takata authored
This patch updates drivers/net/smc91x.c and merges m32r support to it. - Add m32r support. - Modify for SMP kernel. Signed-off-by:
-
Hirokazu Takata authored
Signed-off-by:
-
Hirokazu Takata authored
Here is a patch for M3T-M32700UT board. - Enable CF access through card-service if CONFIG_M32R_CFC is not defined. Signed-off-by:
-
Hirokazu Takata authored
- Support new bootloader "m32r-g00ff". m32r-g00ff is newly written by NIIBE Yutaka and is released under GPL. http://www.gniibe.org/software/m32r-g00ff-20040729.tar.gz - arch/m32r/kernel/setup.c (parse_mem_cmdline): Fix to remove unused region at the end of memory. - include/asm-m32r/uaccess.h (__put_user_u64): Fix to remove warnings in compilation time. NOTE: (for m32r users) From this version, the bootloader-kernel interface has changed. - Section order is changed and rearranged for the new bootloader. - Kernel's entry address is also changed : 0x08001000 --> 0x08002000. - Paramter-passing method from bootloader to kernel is revised. Signed-off-by:
-
Hirokazu Takata authored
Here is a patch for 2.6.8.1 kernel of Renesas M32R processor. Signed-off-by:
-
Hirokazu Takata authored
Here is a patch for m32r's ELF machine code. And also change from "Hitachi H8/300" to "Renesas H8/300"(*). (*) The SuperH, M32R and H8* - now these are all Renesas's products. Signed-off-by:
-
Hirokazu Takata authored
The useless iBCS2 supporting code is removed. However, according to old_ syscalls, I would like to keep backward- compatibility for a while, due to some old deb packages and executables for m32r. I'm struggling to rebuild and replace old packages to new ones. http://debian.linux-m32r.org/Signed-off-by:
-
Hirokazu Takata authored
arch/m32r/kernel/m32r_ksyms, EXPORT_SYMBOL_NOVERS is deprecated, use EXPORT_SYMBOL. Signed-off-by:
-
Hirokazu Takata authored
* include/asm-m32r/atomic.h: - Add atomic_inc_return(), atomic_dec_return(), atomic_add_return(), atomic_sub_return() and atomic_clear_mask(). - Change atomic_sub_and_test(), atomic_inc_and_test() and atomic_dec_and_test() from functions to macros. - Update comments, etc. Signed-off-by:
-
Hirokazu Takata authored
Here's a patch to update headers, elf.h and poll.h, to remove useless iBCS2/SVR4 support code for m32r. Signed-off-by:
-
Hirokazu Takata authored
This patch updates m32r-specific CF/PCMCIA drivers and fixes compile errors. Signed-off-by:
-
Hirokazu Takata authored
This patch update checksum routines. And EXPORT_SYMBOL() is moved from m32r_ksyms.c to csum_partial_copy.c. Signed-off-by:
-
Hirokazu Takata authored
This patch updates asm-m32r/uaccess.h. * include/asm-m32r/uaccess.h: (__copy_to_user_inatomic): Added. (__copy_from_user_inatomic): Added. Update comments. Signed-off-by:
-
Hirokazu Takata authored
This patch updates code to fix compile errors, and so on. * arch/m32r/kernel/Makefile: Change linker script's name from vmlinux.lds.s to vmlinux.lds. * arch/m32r/kernel/process.c (sys_clone): Fix the first parameter of do_fork() call. * arch/m32r/kernel/signal.c: (handle_signal): Add a new second argument, struct k_sigaction *ka. (do_signal): Change get_signal_to_deliver() interface. * include/asm-m32r/hardirq.h: Some declarations are moved to linux/hardirq.h. * include/asm-m32r/page.h: Add devmem_is_allowed() macro. Signed-off-by:
-
Hirokazu Takata authored
This patch upgrades zone_sizes_init() function. This patch is required because free_area_init_node()'s interface has been changed. * arch/m32r/mm/discontig.c (zone_sizes_init): Change free_area_init_node() interface. * arch/m32r/mm/init.c: ditto. Signed-off-by:
-
Hirokazu Takata authored
This patch is for profiling support. profile_tick() is used instead of m32r_do_profile(). * arch/m32r/kernel/smp.c (smp_local_timer_interrupt): Change profile API, use profile_tick() instead of m32r_do_profile(). * arch/m32r/kernel/time.c: ditto. * include/asm-m32r/hw_irq.h (m32r_do_profile): Removed. * include/asm-m32r/ptrace.h (profile_pc): Add profile_pc() macro. Signed-off-by:
-
Hirokazu Takata authored
Add support for the m32r architecture Signed-off-by:
-
Alan Cox authored
A couple of GSM GPRS PCMCIA cards advertise 16 rather than 8 port sized windows for their serial interface. This breaks our current pcmcia serial driver which ignores any windows that are not 8 bytes. To avoid any regressions on other cards given this driver contains a certain amount of "magic" the patch below looks for 8 byte windows first so will not break existing supported cards (I hope ;)) Patch-by:
Alan Cox <alan@redhat.com> OSDL Developer Certiticate Of Origin included herein by reference Acked by Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Andrey V. Savochkin authored
Currently metadata writing errors are ignored and not returned from sys_fsync on ext2 and ext3 filesystems. That is, at least ext2 and ext3. Both ext2 and ext3 resort to sync_inode() in their ->sync_inode method, which in turn calls ->write_inode. ->write_inode method has void type, and any IO errors happening inside are lost. Make ->write_inode return the error code? Signed-off-by:
Andrey Savochkin <saw@saw.sw.com.sg> Signed-off-by:
-
Andi Kleen authored
Copy ioperm bitmaps more efficiently at context switch time. Only copy upto the highest used port. Originally from Ingo Molnar Signed-off-by:
Andi Kleen <ak@muc.de> Signed-off-by:
-
Andi Kleen authored
Turn per cpu TSS into per cpu data. Signed-off-by:
-
Andi Kleen authored
Don't pass CR2 address on alignment faults. They report the address of the last page fault, which is a information leak. Fix this for i386 and x86-64 by passing 0 instead. Pointed out by Zachary Amsden <zach@vmware.com> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
Add read implies exec personality. Signed-off-by:
-
Andi Kleen authored
Sync x86-64 video.S with i386 changes Signed-off-by:
-
Andi Kleen authored
From: James Cleverdon The value that cpuinfo returns for command 1 in ebx is the physical APIC ID latched when the system comes out of reset. Ordinarily, this is identical to the value in the local APIC's ID register, because nearly all BIOSes accept the HW assigned value. Our systems, made up of individual building blocks, can't do that. Each node boots as a separate system and is joined together by the BIOS. Thus, the BIOS rewrites the local APIC ID register with a new value. Potomac and Nocona chips have a mechanism by which the BIOS writer can change bits 7:5 to match the assigned cluster ID. Bits 2:0 come from the thread ID. However, bits 4:3 are still those latched at reset. Oops! Summary: Large clustered systems can't use cpuid to derive the sibling information. Fix: Use the local APIC ID. That's the value we use to online the CPUs, so it had better be OK. For non-clustered systems, cpuid == local APIC, so nothing but large boxes should be affected. Signed-off-by:
-
Andi Kleen authored
Fix bug that caused oops with mem= on certain NUMA configurations Signed-off-by:
-
Andi Kleen authored
Add might_sleep to more *_user functions. Signed-off-by:
-
Andi Kleen authored
Print mce bank enable mask in sysfs in hex Signed-off-by:
-
Andi Kleen authored
Remove WARN_ON in smp_call_function. it breaks the machine check handling and there is no good way to enable interrupts here. Call Trace:<ffffffff8011cb33>{smp_call_function+115} <ffffffff8011cbf9>{smp_send_stop+25} <ffffffff80138012>{panic+274} <ffffffff801187e0>{do_machine_check+0} <ffffffff80118c3a>{do_machine_check+1114} <ffffffff80111663>{machine_check+127} <ffffffff803434d7>{net_rx_action+215} <EOE> <IRQ> <ffffffff8013c8e3>{__do_softirq+83} <ffffffff8013c975>{do_softirq+53} <ffffffff80113cdd>{do_IRQ+317} <<ffffffff8010f3b0>{default_idle+0} <ffffffff80110b81>{ret_from_intr+0} <EOI> <ffffffff8010f3d0>{default_idle+32} <ffffffff8010f86a>{cpu_idle+26} <ffffffff8058f886>{start_kernel+502} <ffffffff8058f1e0>{_sinittext+48 Signed-off-by: -
Andi Kleen authored
Make the x86-64 machine check handler configurable when EMBEDDED Signed-off-by:
-
Andi Kleen authored
Do IO-APIC suspend/resume. Untested so far. Signed-off-by:
-
Andi Kleen authored
Don't panic when io apic id cannot be set. Signed-off-by:
-
Andi Kleen authored
Avoid deadlock when kernel fault happens inside mmap sem. Signed-off-by:
-
Andi Kleen authored
Update x86-64 defconfig Signed-off-by:
-
Andi Kleen authored
Ported from i386 Allow to quieten apic boot output on the command line using apic={verbose,debug,quiet} Make it quiet by default Add extra #define for making apic print functions __init or not __init (for easier debugging) Signed-off-by: -
Andi Kleen authored
Make APIC errors KERN_DEBUG Signed-off-by:
-
Andi Kleen authored
Add an atomic64_t type to x86-64. Not used right now, but may be useful in the future, e.g. for rss together with C.Lameter's page fault scalability patches. Signed-off-by:
-
David Gibson authored
For historical reasons, ppc64 has ended up with two #defines for the size of a large (16M) page: LARGE_PAGE_SHIFT and HPAGE_SHIFT. This patch removes LARGE_PAGE_SHIFT in favour of the more widely used HPAGE_SHIFT. Signed-off-by:
David Gibson <dwg@au1.ibm.com> Signed-off-by:
-
