Skip to content

L
linux
Switch branch/tag
  1. 18 Mar, 2016 6 commits
    • Charles Keepax's avatar
      ASoC: samsung: Use IRQ safe spin lock calls · ea46df70
      Charles Keepax authored 
      [ Upstream commit 316fa9e0 ]

Lockdep warns of a potential lock inversion, i2s->lock is held numerous
times whilst we are under the substream lock (snd_pcm_stream_lock). If
we use the IRQ unsafe spin lock calls, you can also end up locking
snd_pcm_stream_lock whilst under i2s->lock (if an IRQ happens whilst we
are holding i2s->lock). This could result in deadlock.

[   18.147001]        CPU0                    CPU1
[   18.151509]        ----                    ----
[   18.156022]   lock(&(&pri_dai->spinlock)->rlock);
[   18.160701]                                local_irq_disable();
[   18.166622]                                lock(&(&substream->self_group.lock)->rlock);
[   18.174595]                                lock(&(&pri_dai->spinlock)->rlock);
[   18.181806]   <Interrupt>
[   18.184408]     lock(&(&substream->self_group.lock)->rlock);
[   18.190045]
[   18.190045]  *** DEADLOCK ***

This patch changes to using the irq safe spinlock calls, to avoid this
issue.

Fixes: ce8bcdbb ("ASoC: samsung: i2s: Protect more registers with a spinlock")
Signed-off-by: default avatarCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: default avatarAnand Moon <linux.amoon@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      ea46df70
    • Liad Kaufman's avatar
      iwlwifi: mvm: inc pending frames counter also when txing non-sta · 7e62b968
      Liad Kaufman authored 
      [ Upstream commit fb896c44 ]

Until this patch, when TXing non-sta the pending_frames counter
wasn't increased, but it WAS decreased in
iwl_mvm_rx_tx_cmd_single(), what makes it negative in certain
conditions. This in turn caused much trouble when we need to
remove the station since we won't be waiting forever until
pending_frames gets 0. In certain cases, we were exhausting
the station table even in BSS mode, because we had a lot of
stale stations.

Increase the counter also in iwl_mvm_tx_skb_non_sta() after a
successful TX to avoid this outcome.

CC: <stable@vger.kernel.org> [3.18+]
Signed-off-by: default avatarLiad Kaufman <liad.kaufman@intel.com>
Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      7e62b968
    • Sven Eckelmann's avatar
      mac80211: minstrel: Change expected throughput unit back to Kbps · 60ca0012
      Sven Eckelmann authored 
      [ Upstream commit 212c5a5e ]

The change from cur_tp to the function
minstrel_get_tp_avg/minstrel_ht_get_tp_avg changed the unit used for the
current throughput. For example in minstrel_ht the correct
conversion between them would be:

    mrs->cur_tp / 10 == minstrel_ht_get_tp_avg(..).

This factor 10 must also be included in the calculation of
minstrel_get_expected_throughput and minstrel_ht_get_expected_throughput to
return values with the unit [Kbps] instead of [10Kbps]. Otherwise routing
algorithms like B.A.T.M.A.N. V will make incorrect decision based on these
values. Its kernel based implementation expects expected_throughput always
to have the unit [Kbps] and not sometimes [10Kbps] and sometimes [Kbps].

The same requirement has iw or olsrdv2's nl80211 based statistics module
which retrieve the same data via NL80211_STA_INFO_TX_BITRATE.

Cc: stable@vger.kernel.org
Fixes: 6a27b2c4 ("mac80211: restructure per-rate throughput calculation into function")
Signed-off-by: default avatarSven Eckelmann <sven@open-mesh.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      60ca0012
    • Chris Bainbridge's avatar
      mac80211: fix use of uninitialised values in RX aggregation · d5bb89fa
      Chris Bainbridge authored 
      [ Upstream commit f39ea269 ]

Use kzalloc instead of kmalloc for struct tid_ampdu_rx to
initialize the "removed" field (all others are initialized
manually). That fixes:

UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29
load of value 2 is not a valid value for type '_Bool'
CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265
Workqueue: phy0 rt2x00usb_work_rxdone
 0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007
 ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500
 ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032
Call Trace:
 [<ffffffff8181d866>] dump_stack+0x45/0x5f
 [<ffffffff8188422d>] ubsan_epilogue+0xd/0x40
 [<ffffffff81884747>] __ubsan_handle_load_invalid_value+0x67/0x70
 [<ffffffff82227b4d>] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730
 [<ffffffff8222ca14>] ieee80211_prepare_and_rx_handle+0xd04/0x1c00
 [<ffffffff8222db03>] __ieee80211_rx_handle_packet+0x1f3/0x750
 [<ffffffff8222e4a7>] ieee80211_rx_napi+0x447/0x990

While at it, convert to use sizeof(*tid_agg_rx) instead.

Fixes: 788211d8 ("mac80211: fix RX A-MPDU session reorder timer deletion")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarChris Bainbridge <chris.bainbridge@gmail.com>
[reword commit message, use sizeof(*tid_agg_rx)]
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      d5bb89fa
    • Johannes Berg's avatar
      cfg80211/wext: fix message ordering · 6d5202f3
      Johannes Berg authored 
      [ Upstream commit cb150b9d ]

Since cfg80211 frequently takes actions from its netdev notifier
call, wireless extensions messages could still be ordered badly
since the wext netdev notifier, since wext is built into the
kernel, runs before the cfg80211 netdev notifier. For example,
the following can happen:

5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
5: wlan1: <BROADCAST,MULTICAST,UP>
    link/ether

when setting the interface down causes the wext message.

To also fix this, export the wireless_nlevent_flush() function
and also call it from the cfg80211 notifier.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      6d5202f3
    • Johannes Berg's avatar
      wext: fix message delay/ordering · 746ba2ee
      Johannes Berg authored 
      [ Upstream commit 8bf86273 ]

Beniamino reported that he was getting an RTM_NEWLINK message for a
given interface, after the RTM_DELLINK for it. It turns out that the
message is a wireless extensions message, which was sent because the
interface had been connected and disconnection while it was deleted
caused a wext message.

For its netlink messages, wext uses RTM_NEWLINK, but the message is
without all the regular rtnetlink attributes, so "ip monitor link"
prints just rudimentary information:

5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
Deleted 5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
5: wlan1: <BROADCAST,MULTICAST,UP>
    link/ether
(from my hwsim reproduction)

This can cause userspace to get confused since it doesn't expect an
RTM_NEWLINK message after RTM_DELLINK.

The reason for this is that wext schedules a worker to send out the
messages, and the scheduling delay can cause the messages to get out
to userspace in different order.

To fix this, have wext register a netdevice notifier and flush out
any pending messages when netdevice state changes. This fixes any
ordering whenever the original message wasn't sent by a notifier
itself.

Cc: stable@vger.kernel.org
Reported-by: default avatarBeniamino Galvani <bgalvani@redhat.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      746ba2ee
  3. 17 Mar, 2016 1 commit
  5. 14 Mar, 2016 4 commits
  7. 09 Mar, 2016 29 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7