- 25 Aug, 2022 18 commits
-
-
Johannes Berg authored
For AP/non-AP the EHT MCS/NSS subfield size differs, the 4-octet subfield is only used for 20 MHz-only non-AP STA. Pass an argument around everywhere to be able to parse it properly. Signed-off-by:Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
The next patch will require splitting the data here into AP and non-AP because for EHT, the format of the MCS/NSS support (struct ieee80211_eht_mcs_nss_supp) is different, for AP the only_20mhz cannot be used. Signed-off-by: -
Mordechay Goodstein authored
Draft P802.11be_D2.1, section 35.3.17 states that the EML Capabilities Field shouldn't be included in case the device doesn't have support for EMLSR or EMLMR. Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Johannes Berg authored
When queuing frames to an interface store the link ID we determined (which possibly came from the driver in the RX status in the first place) in the RX status, and use it in the MLME code to send probe responses, beacons and CSA frames to the right link. Signed-off-by: -
Vasanthakumar Thiagarajan authored
With link_id reported in rx_status for MLO connection, do the stats update on the appropriate link instead of always deflink. Signed-off-by:
Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Link: https://lore.kernel.org/r/20220817104213.2531-3-quic_vthiagar@quicinc.comSigned-off-by:
-
Vasanthakumar Thiagarajan authored
In MLO, when the address translation from link to MLD is done in fw/hw, it is necessary to be able to have some information on the link on which the frame has been received. Extend the rx API to include link_id and a valid flag in ieee80211_rx_status. Also make chanes to mac80211 rx APIs to make use of the reported link_id after sanity checks. Signed-off-by:
-
Johannes Berg authored
Implement key installation and lookup (on TX and RX) for MLO, so we can use multiple GTKs/IGTKs/BIGTKs. Co-authored-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Veerendranath Jakkam authored
Add support for various key operations on MLD by adding new parameter link_id. Pass the link_id received from userspace to driver for add_key, get_key, del_key, set_default_key, set_default_mgmt_key and set_default_beacon_key to support configuring keys specific to each MLO link. Userspace must not specify link ID for MLO pairwise key since it is common for all the MLO links. Signed-off-by:
Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.comSigned-off-by:
-
Veerendranath Jakkam authored
Currently, MLO support is not added for WEXT code and WEXT handlers are prevented on MLDs. Prevent WEXT handler cfg80211_wext_siwencodeext() also on MLD which is missed in commit 7b0a0e3c ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by:
-
Veerendranath Jakkam authored
MLO connections are not supposed to use WEP security. Reject connect response of MLO connection if WEP security mode is used. Signed-off-by:
-
Johannes Berg authored
We've already freed the assoc_data at this point, so need to use another copy of the AP (MLD) address instead. Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by:
-
Shaul Triebitz authored
Configure the correct link per the passed parameters. Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Shaul Triebitz authored
The Tx queue parameters are per link, so add the link ID from nl80211 parameters to the API. While at it, lock the wdev when calling into the driver so it (and we) can check the link ID appropriately. Signed-off-by:
-
Shaul Triebitz authored
For an AP interface, set the link BSSID when the link is initialized. Signed-off-by:
-
Shaul Triebitz authored
When checking for channel regulatory validity, use the AP link chandef (and not mesh's chandef). Fixes: 7b0a0e3c ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by:
-
Ilan Peer authored
Based on changes in the specification the TBTT information in the RNR can include MLD information, so update the parsing to allow extracting the short SSID information in such a case. Signed-off-by:
-
Shaul Triebitz authored
In ieee80211_sta_remove_link, valid_links is set to the new_links before calling drv_change_sta_links, but is used for the old_links. Fixes: cb71f1d1 ("wifi: mac80211: add sta link addition/removal") Signed-off-by:
-
Johannes Berg authored
If there's no link ID, then check that there are no changes to the link, and if so accept them, unless a new link is created. While at it, reject creating a new link without an address. This fixes authorizing an MLD (peer) that has no link 0. Signed-off-by:
-
- 10 Aug, 2022 12 commits
-
-
Chih-Kang Chang authored
Mac80211 core may ask driver to change to idle mode during HW scan, then H2C command for HW scan will send failed since chip is in idle mode. Therefore, We check the SCANNING flag before entering IPS to prevent this behavior. Signed-off-by:
Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220809084107.38137-8-pkshih@realtek.com
-
Chih-Kang Chang authored
Enter or leave IPS controlled by mac80211 before driver support HW scan. After support HW scan, driver need to control IPS before start HW scan and scan complete, but mac80211 also ask driver enter or leave IPS. Therefore, we add flag check in IPS to prevent entering or leaving IPS twice. Signed-off-by:
-
Chih-Kang Chang authored
We need to flush queue before HW scan to avoid packets dropped by hardware. Signed-off-by:
-
Chih-Kang Chang authored
During HW scan, the channel related feilds in hal struct changed partially. If setting Tx power will get WARNING:rtw_get_tx_power_params() due to some of fields in hal struct mismatch. Therefore, we fix to change all required fields in hal struct when channel switch during HW scan. Signed-off-by:
-
Chih-Kang Chang authored
In order to set channel info to hal during HW scan, we add the update channel flow to support setting by parameters to meet the HW scan requriement. Signed-off-by:
-
Chih-Kang Chang authored
Applying regulatory and getting Tx power table will access hal data, it should hold rtwdev::mutex to avoid hal data changed during setting flow. Signed-off-by:
-
Chih-Kang Chang authored
Applying SAR will access hal data, it should hold rtwdev::mutex to avoid hal data changed during setting flow. Signed-off-by:
-
Wataru Gohda authored
The skb will be allocated to send TIM update info in brcmf_fws_tim_update. Currently the skb will be freed when tx is failed but it will not be freed when tx is completed successfully. The fix is to free the skb when tx is completed always. Signed-off-by:
Wataru Gohda <wataru.gohda@cypress.com> Signed-off-by:
Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by:
-
Wataru Gohda authored
Conn_info->req_ie/resp_ie is used to indicate the assoc_req_ies / assoc_resp_ies to cfg80211 layer when connection is done. The buffer is freed and allocated again at next connection establishment. The buffers also needs to be freed at the timing of rmmod as well. Signed-off-by:
-
Wright Feng authored
The variable i is changed when setting random MAC address and causes invalid address access when printing the value of pi->reqs[i]->reqid. We replace reqs index with ri to fix the issue. [ 136.726473] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000 [ 136.737365] Mem abort info: [ 136.740172] ESR = 0x96000004 [ 136.743359] Exception class = DABT (current EL), IL = 32 bits [ 136.749294] SET = 0, FnV = 0 [ 136.752481] EA = 0, S1PTW = 0 [ 136.755635] Data abort info: [ 136.758514] ISV = 0, ISS = 0x00000004 [ 136.762487] CM = 0, WnR = 0 [ 136.765522] user pgtable: 4k pages, 48-bit VAs, pgdp = 000000005c4e2577 [ 136.772265] [0000000000000000] pgd=0000000000000000 [ 136.777160] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 136.782732] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) compat(O) [ 136.789788] Process wificond (pid: 3175, stack limit = 0x00000000053048fb) [ 136.796664] CPU: 3 PID: 3175 Comm: wificond Tainted: G O 4.19.42-00001-g531a5f5 #1 [ 136.805532] Hardware name: Freescale i.MX8MQ EVK (DT) [ 136.810584] pstate: 60400005 (nZCv daif +PAN -UAO) [ 136.815429] pc : brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac] [ 136.821811] lr : brcmf_pno_config_sched_scans+0x67c/0xa80 [brcmfmac] [ 136.828162] sp : ffff00000e9a3880 [ 136.831475] x29: ffff00000e9a3890 x28: ffff800020543400 [ 136.836786] x27: ffff8000b1008880 x26: ffff0000012bf6a0 [ 136.842098] x25: ffff80002054345c x24: ffff800088d22400 [ 136.847409] x23: ffff0000012bf638 x22: ffff0000012bf6d8 [ 136.852721] x21: ffff8000aced8fc0 x20: ffff8000ac164400 [ 136.858032] x19: ffff00000e9a3946 x18: 0000000000000000 [ 136.863343] x17: 0000000000000000 x16: 0000000000000000 [ 136.868655] x15: ffff0000093f3b37 x14: 0000000000000050 [ 136.873966] x13: 0000000000003135 x12: 0000000000000000 [ 136.879277] x11: 0000000000000000 x10: ffff000009a61888 [ 136.884589] x9 : 000000000000000f x8 : 0000000000000008 [ 136.889900] x7 : 303a32303d726464 x6 : ffff00000a1f957d [ 136.895211] x5 : 0000000000000000 x4 : ffff00000e9a3942 [ 136.900523] x3 : 0000000000000000 x2 : ffff0000012cead8 [ 136.905834] x1 : ffff0000012bf6d8 x0 : 0000000000000000 [ 136.911146] Call trace: [ 136.913623] brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac] [ 136.919658] brcmf_pno_start_sched_scan+0xa4/0x118 [brcmfmac] [ 136.925430] brcmf_cfg80211_sched_scan_start+0x80/0xe0 [brcmfmac] [ 136.931636] nl80211_start_sched_scan+0x140/0x308 [cfg80211] [ 136.937298] genl_rcv_msg+0x358/0x3f4 [ 136.940960] netlink_rcv_skb+0xb4/0x118 [ 136.944795] genl_rcv+0x34/0x48 [ 136.947935] netlink_unicast+0x264/0x300 [ 136.951856] netlink_sendmsg+0x2e4/0x33c [ 136.955781] __sys_sendto+0x120/0x19c Signed-off-by:
Wright Feng <wright.feng@cypress.com> Signed-off-by:
-
Wright Feng authored
We should not sleep while holding the spin lock. It makes 'scheduling while atomic' in brcmf_msgbuf_delete_flowring. And to avoid race condition between deleting flowring and txflow, we only hold spin lock when seting flowring status to RING_CLOSING. Signed-off-by:
-
Wright Feng authored
The race condition in brcmf_msgbuf_txflow and brcmf_msgbuf_delete_flowring makes tx_msghdr writing after brcmf_msgbuf_remove_flowring. Host driver should delete flowring after txflow complete and all txstatus back, or pend_8021x_cnt will never be zero and cause every connection 950 milliseconds(MAX_WAIT_FOR_8021X_TX) delay. Signed-off-by:
-
- 09 Aug, 2022 10 commits
-
-
Chia-Yuan Li authored
Correct IMR settings to let self error recover mechanism works accurately. Signed-off-by:
Chia-Yuan Li <leo.li@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
It's unnecessary to iterate leaving PS mode. So, move it out of the iteration. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Sebin Sebastian authored
Remove braces around single statement blocks in order to improve readability. Also, an extra blank line was removed. Both warnings are reported by checkpatch.pl Signed-off-by:
Sebin Sebastian <mailmesebin00@gmail.com> Signed-off-by:
-
Ping-Ke Shih authored
Since IQK could spend time, we make a cache of IQK result matrix that looks like iqk_matrix[channel_idx].val[x][y], and we can reload the matrix if we have made a cache. To determine a cache is made, we check iqk_matrix[channel_idx].val[0][0]. The initial commit 7274a8c2 ("rtlwifi: rtl8192de: Merge phy routines") make a mistake that checks incorrect iqk_matrix[channel_idx].val[0] that is always true, and this mistake is found by commit ee3db469 ("wifi: rtlwifi: remove always-true condition pointed out by GCC 12"), so I recall the vendor driver to find fix and apply the correctness. Fixes: 7274a8c2 ("rtlwifi: rtl8192de: Merge phy routines") Signed-off-by:
-
Ruffalo Lavoisier authored
Remove repeated 'to' from 'to to' Signed-off-by:
Ruffalo Lavoisier <RuffaloLavoisier@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Ping-Ke Shih authored
Since chip_info has became const table, we must access them via const pointer to avoid invalid writing. Signed-off-by:
-
Zong-Zhe Yang authored
reported by smatch phy.c:854 rtw_phy_linear_2_db() error: buffer overflow 'db_invert_table[i]' 8 <= 8 (assuming for loop doesn't break) However, it seems to be a false alarm because we prevent it originally via if (linear >= db_invert_table[11][7]) return 96; /* maximum 96 dB */ Still, we adjust the code to be more readable and avoid smatch warning. Signed-off-by: -
Chih-Kang Chang authored
The original timing that store OP channel info is after associated. However, HW scan might happen before associated without backing to OP channel, that will cause authentication or association fail. Therefore, we modify the timing of storing OP channel info. Signed-off-by:
-
Chih-Kang Chang authored
HW scan need to start queues after switch to OP channel, and stop queues before leaving op channel. However, in original code, driver will start queues after switch to OP channel, but stop queues until switch to OP channel next time, that will cause packets transmitted in wrong channel. So we fix the stop queues timing. Signed-off-by:
-
