- 21 Jul, 2019 35 commits
-
-
Nicolas Boichat authored
[ Upstream commit 35594bc7 ] Before suspending, mtk-eint would set the interrupt mask to the one in wake_mask. However, some of these interrupts may not have a corresponding interrupt handler, or the interrupt may be disabled. On resume, the eint irq handler would trigger nevertheless, and irq/pm.c:irq_pm_check_wakeup would be called, which would try to call irq_disable. However, if the interrupt is not enabled (irqd_irq_disabled(&desc->irq_data) is true), the call does nothing, and the interrupt is left enabled in the eint driver. Especially for level-sensitive interrupts, this will lead to an interrupt storm on resume. If we detect that an interrupt is only in wake_mask, but not in cur_mask, we can just mask it out immediately (as mtk_eint_resume would do anyway at a later stage in the resume sequence, when restoring cur_mask). Fixes: bf22ff45 ("genirq: Avoid unnecessary low level irq function calls") Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Acked-by:
Sean Wang <sean.wang@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kai-Heng Feng authored
[ Upstream commit 0a95fc73 ] There's a new ALPS touchpad/pointstick combo device that requires MT_CLS_WIN_8_DUAL to make its pointsitck work as a mouse. The device can be found on HP ZBook 17 G5. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Kyle Godbey authored
[ Upstream commit 315ffcc9 ] Add support for Huion HS64 drawing tablet to hid-uclogic Signed-off-by:
Kyle Godbey <me@kyle.ee> Signed-off-by:
-
Oleksandr Natalenko authored
[ Upstream commit dcf768b0 ] I've spotted another Chicony PixArt mouse in the wild, which requires HID_QUIRK_ALWAYS_POLL quirk, otherwise it disconnects each minute. USB ID of this device is 0x04f2:0x0939. We've introduced quirks like this for other models before, so lets add this mouse too. Link: https://github.com/sriemer/fix-linux-mouse#usb-mouse-disconnectsreconnects-every-minute-on-linuxSigned-off-by:
Oleksandr Natalenko <oleksandr@redhat.com> Acked-by:
Sebastian Parschauer <s.parschauer@gmx.de> Signed-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit c1887159 ] __startup_64() uses fixup_pointer() to access global variables in a position-independent fashion. Access to next_early_pgt was wrapped into the helper, but one instance in the 5-level paging branch was missed. GCC generates a R_X86_64_PC32 PC-relative relocation for the access which doesn't trigger the issue, but Clang emmits a R_X86_64_32S which leads to an invalid memory access and system reboot. Fixes: 187e91fe ("x86/boot/64/clang: Use fixup_pointer() to access 'next_early_pgt'") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Potapenko <glider@google.com> Link: https://lkml.kernel.org/r/20190620112422.29264-1-kirill.shutemov@linux.intel.comSigned-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit 81c7ed29 ] A kernel which boots in 5-level paging mode crashes in a small percentage of cases if KASLR is enabled. This issue was tracked down to the case when the kernel image unpacks in a way that it crosses an 1G boundary. The crash is caused by an overrun of the PMD page table in __startup_64() and corruption of P4D page table allocated next to it. This particular issue is not visible with 4-level paging as P4D page tables are not used. But the P4D and the PUD calculation have similar problems. The PMD index calculation is wrong due to operator precedence, which fails to confine the PMDs in the PMD array on wrap around. The P4D calculation for 5-level paging and the PUD calculation calculate the first index correctly, but then blindly increment it which causes the same issue when a kernel image is located across a 512G and for 5-level paging across a 46T boundary. This wrap around mishandling was introduced when these parts moved from assembly to C. Restore it to the correct behaviour. Fixes: c88d7150 ("x86/boot/64: Rewrite startup_64() in C") Signed-off-by:
-
Milan Broz authored
[ Upstream commit 2eba4e64 ] DM verity should also use DMERR_LIMIT to limit repeat data block corruption messages. Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Jerome Marchand authored
[ Upstream commit a0651926 ] For the first call to realloc_argv() in dm_split_args(), old_argv is NULL and size is zero. Then memcpy is called, with the NULL old_argv as the source argument and a zero size argument. AFAIK, this is undefined behavior and generates the following warning when compiled with UBSAN on ppc64le: In file included from ./arch/powerpc/include/asm/paca.h:19, from ./arch/powerpc/include/asm/current.h:16, from ./include/linux/sched.h:12, from ./include/linux/kthread.h:6, from drivers/md/dm-core.h:12, from drivers/md/dm-table.c:8: In function 'memcpy', inlined from 'realloc_argv' at drivers/md/dm-table.c:565:3, inlined from 'dm_split_args' at drivers/md/dm-table.c:588:9: ./include/linux/string.h:345:9: error: argument 2 null where non-null expected [-Werror=nonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/md/dm-table.c: In function 'dm_split_args': ./include/linux/string.h:345:9: note: in a call to built-in function '__builtin_memcpy' Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit 4b36082e ] The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0], OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to facilitate the register offset calculation and use it where necessary. Fixes: da801ab5 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit f2818ba3 ] The third argument passed to REG is not the correct one and ocelot_gpio_set_direction is not working for pins after 31. Fix that by passing the pin number instead of the modulo 32 value. Fixes: da801ab5 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by:
-
Phil Reid authored
[ Upstream commit 6dbc6e6f ] Currently probing of the mcp23s08 results in an error message "detected irqchip that is shared with multiple gpiochips: please fix the driver" This is due to the following: Call to mcp23s08_irqchip_setup() with call hierarchy: mcp23s08_irqchip_setup() gpiochip_irqchip_add_nested() gpiochip_irqchip_add_key() gpiochip_set_irq_hooks() Call to devm_gpiochip_add_data() with call hierarchy: devm_gpiochip_add_data() gpiochip_add_data_with_key() gpiochip_add_irqchip() gpiochip_set_irq_hooks() The gpiochip_add_irqchip() returns immediately if there isn't a irqchip but we added a irqchip due to the previous mcp23s08_irqchip_setup() call. So it calls gpiochip_set_irq_hooks() a second time. Fix this by moving the call to devm_gpiochip_add_data before the call to mcp23s08_irqchip_setup Fixes: 02e389e6 ("pinctrl: mcp23s08: fix irq setup order") Suggested-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
-
Sébastien Szymanski authored
[ Upstream commit 3cf10132 ] According to the i.MX6UL/L RM, table 3.1 "ARM Cortex A7 domain interrupt summary", the interrupts for the PWM[1-4] go from 83 to 86. Fixes: b9901fe8 ("ARM: dts: imx6ul: add pwm[1-4] nodes") Signed-off-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Sergej Benilov authored
[ Upstream commit 8ac8a010 ] Since commit 605ad7f1 "tcp: refine TSO autosizing", outbound throughput is dramatically reduced for some connections, as sis900 is doing TX completion within idle states only. Make TX completion happen after every transmitted packet. Test: netperf before patch: > netperf -H remote -l -2000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 253.44 0.06 after patch: > netperf -H remote -l -10000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 5.38 14.89 Thx to Dave Miller and Eric Dumazet for helpful hints Signed-off-by:
Sergej Benilov <sergej.benilov@googlemail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit aad1dcc4 ] The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a softdep line, so that the corresponding module gets prepared gracefully. Without this, a simple inclusion to initrd via dracut failed due to the missing dependency, for example. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Petr Oros authored
[ Upstream commit 2e5db6eb ] Certain cards in conjunction with certain switches need a little more time for link setup that results in ethtool link test failure after offline test. Patch adds a loop that waits for a link setup finish. Changes in v2: - added fixes header Fixes: 4276e47e ("be2net: Add link test to list of ethtool self tests.") Signed-off-by:
Petr Oros <poros@redhat.com> Reviewed-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit ea136a11 ] The left shift of unsigned int cpu_khz will overflow for large values of cpu_khz, so cast it to a long long before shifting it to avoid overvlow. For example, this can happen when cpu_khz is 4194305, i.e. ~4.2 GHz. Addresses-Coverity: ("Unintentional integer overflow") Fixes: 8c3ba8d0 ("x86, apic: ack all pending irqs when crashed/on kexec") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 919aef44 ] Compiling a kernel with W=1 generates this warning, arch/x86/platform/efi/quirks.c:731:16: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Fixes: 3425d934 ("efi/x86: Handle page faults occurring while running ...") Signed-off-by:
Qian Cai <cai@lca.pw> Acked-by:
"Prakhya, Sai Praneeth" <sai.praneeth.prakhya@intel.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
David Howells authored
[ Upstream commit 90fa9b64 ] Fix the cb_break_lock spinlock in afs_volume struct by initialising it when the volume record is allocated. Also rename the lock to cb_v_break_lock to distinguish it from the lock of the same name in the afs_server struct. Without this, the following trace may be observed when a volume-break callback is received: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 50 Comm: kworker/2:1 Not tainted 5.2.0-rc1-fscache+ #3045 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: afs SRXAFSCB_CallBack Call Trace: dump_stack+0x67/0x8e register_lock_class+0x23b/0x421 ? check_usage_forwards+0x13c/0x13c __lock_acquire+0x89/0xf73 lock_acquire+0x13b/0x166 ? afs_break_callbacks+0x1b2/0x3dd _raw_write_lock+0x2c/0x36 ? afs_break_callbacks+0x1b2/0x3dd afs_break_callbacks+0x1b2/0x3dd ? trace_event_raw_event_afs_server+0x61/0xac SRXAFSCB_CallBack+0x11f/0x16c process_one_work+0x2c5/0x4ee ? worker_thread+0x234/0x2ac worker_thread+0x1d8/0x2ac ? cancel_delayed_work_sync+0xf/0xf kthread+0x11f/0x127 ? kthread_park+0x76/0x76 ret_from_fork+0x24/0x30 Fixes: 68251f0a ("afs: Fix whole-volume callback handling") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 27e23d89 ] omap3xxx_prm_enable_io_wakeup() is marked __init, but its caller is not, so we get a warning with clang-8: WARNING: vmlinux.o(.text+0x343c8): Section mismatch in reference from the function omap3xxx_prm_late_init() to the function .init.text:omap3xxx_prm_enable_io_wakeup() The function omap3xxx_prm_late_init() references the function __init omap3xxx_prm_enable_io_wakeup(). This is often because omap3xxx_prm_late_init lacks a __init annotation or the annotation of omap3xxx_prm_enable_io_wakeup is wrong. When building with gcc, omap3xxx_prm_enable_io_wakeup() is always inlined, so we never noticed in the past. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
Andrew Murray <andrew.murray@arm.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 36558020 ] It's a simple typo in the DNS file, which was pretty serious. No scripts were working properly. Fix it up. Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 085ebfe9 ] perf_sample_regs_user() uses 'current->mm' to test for the presence of userspace, but this is insufficient, consider use_mm(). A better test is: '!(current->flags & PF_KTHREAD)', exec() clears PF_KTHREAD after it sets the new ->mm but before it drops to userspace for the first time. Possibly obsoletes: bf05fc25 ("powerpc/perf: Fix oops when kthread execs user process") Reported-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reported-by:
Young Xiao <92siuyang@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4018994f ("perf: Add ability to attach user level registers dump to sample") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 16391bfc ] This tests that when a process with a mapping above 512TB forks we correctly separate the parent and child address spaces. This exercises the bug in the context id handling fixed in the previous commit. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ran Wang authored
[ Upstream commit 53f2ac9d ] PSCI spec define 1st parameter's bit 16 of function CPU_SUSPEND to indicate CPU State Type: 0 for standby, 1 for power down. In this case, we want to select standby for CPU idle feature. But current setting wrongly select power down and cause CPU SUSPEND fail every time. Need this fix. Fixes: 8897f325 ("arm64: dts: Add support for NXP LS1028A SoC") Signed-off-by:
Ran Wang <ran.wang_1@nxp.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit a483fcab ] Starting with ACPI 6.2 bits 1 and 2 of the BGRT status field are no longer reserved. These bits are now used to indicate if the image needs to be rotated before being displayed. The first device using these bits has now shown up (the GPD MicroPC) and the reserved bits check causes us to reject the valid BGRT table on this device. Rather then changing the reserved bits check, allowing only the 2 new bits, instead just completely remove it so that we do not end up with a similar problem when more bits are added in the future. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 41b3588d ] If we do a clk_get() for a clock that does not exists, we have _ti_omap4_clkctrl_xlate() return uninitialized data if no match is found. This can be seen in some cases with SLAB_DEBUG enabled: Unable to handle kernel paging request at virtual address 5a5a5a5a ... clk_hw_create_clk.part.33 sysc_notifier_call notifier_call_chain blocking_notifier_call_chain device_add Let's fix this by setting a found flag only when we find a match. Reported-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Fixes: 88a17252 ("clk: ti: add support for clkctrl clocks") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Heyi Guo authored
[ Upstream commit a050fa54 ] When we run several VMs with PCI passthrough and GICv4 enabled, not pinning vCPUs, we will occasionally see below warnings in dmesg: ITS queue timeout (65440 65504 480) ITS cmd its_build_vmovp_cmd failed The reason for the above issue is that in BUILD_SINGLE_CMD_FUNC: 1. Post the write command. 2. Release the lock. 3. Start to read GITS_CREADR to get the reader pointer. 4. Compare the reader pointer to the target pointer. 5. If reader pointer does not reach the target, sleep 1us and continue to try. If we have several processors running the above concurrently, other CPUs will post write commands while the 1st CPU is waiting the completion. So we may have below issue: phase 1: ---rd_idx-----from_idx-----to_idx--0--------- wait 1us: phase 2: --------------from_idx-----to_idx--0-rd_idx-- That is the rd_idx may fly ahead of to_idx, and if in case to_idx is near the wrap point, rd_idx will wrap around. So the below condition will not be met even after 1s: if (from_idx < to_idx && rd_idx >= to_idx) There is another theoretical issue. For a slow and busy ITS, the initial rd_idx may fall behind from_idx a lot, just as below: ---rd_idx---0--from_idx-----to_idx----------- This will cause the wait function exit too early. Actually, it does not make much sense to use from_idx to judge if to_idx is wrapped, but we need a initial rd_idx when lock is still acquired, and it can be used to judge whether to_idx is wrapped and the current rd_idx is wrapped. We switch to a method of calculating the delta of two adjacent reads and accumulating it to get the sum, so that we can get the real rd_idx from the wrapped value even when the queue is almost full. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by:
Heyi Guo <guoheyi@huawei.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Guo Ren authored
[ Upstream commit db56c512 ] The csky,mpintc could deliver a external irq to one cpu or all cpus, but it couldn't deliver a external irq to a group of cpus with cpu_mask. So we only use auto deliver mode when affinity mask_val is equal to cpu_present_mask. There is no limitation for only two cpus in SMP system. Signed-off-by:
Guo Ren <ren_guo@c-sky.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 26d65140 ] Amlogic's vendor kernel defines an OPP for the GPU on Meson8b boards with a voltage of 1.15V. It turns out that the vendor kernel relies on the bootloader to set up the voltage. The bootloader however sets a fixed voltage of 1.10V. Amlogic's patched u-boot sources (uboot-2015-01-15-23a3562521) confirm this: $ grep -oiE "VDD(EE|AO)_VOLTAGE[ ]+[0-9]+" board/amlogic/configs/m8b_* board/amlogic/configs/m8b_m100_v1.h:VDDAO_VOLTAGE 1100 board/amlogic/configs/m8b_m101_v1.h:VDDAO_VOLTAGE 1100 board/amlogic/configs/m8b_m102_v1.h:VDDAO_VOLTAGE 1100 board/amlogic/configs/m8b_m200_v1.h:VDDAO_VOLTAGE 1100 board/amlogic/configs/m8b_m201_v1.h:VDDEE_VOLTAGE 1100 board/amlogic/configs/m8b_m201_v1.h:VDDEE_VOLTAGE 1100 board/amlogic/configs/m8b_m202_v1.h:VDDEE_VOLTAGE 1100 Another hint at this is the VDDEE voltage on the EC-100 and Odroid-C1 boards. The VDDEE regulator supplies the Mali GPU. It's basically a copy of the VCCK (CPU supply) which means it's limited to 0.86V to 1.14V. Update the operating voltage of the Mali GPU on Meson8b to 1.10V so it matches with what the vendor u-boot sets. Fixes: c3ea80b6 ("ARM: dts: meson8b: add the Mali-450 MP2 GPU") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 01dfdd7b ] The interrupts in Amlogic's vendor kernel sources are all contiguous. There are two typos leading to pp2 and pp4 as well as ppmmu2 and ppmmu4 incorrectly sharing the same interrupt line. Fix this by using interrupt 170 for pp2 and 171 for ppmmu2. Also drop the undocumented "switch-delay" which is a left-over from my experiments with an early lima kernel driver when it was still out-of-tree and required this property on Amlogic SoCs. Fixes: 7d3f6b53 ("ARM: dts: meson8: add the Mali-450 MP6 GPU") Signed-off-by:
-
Sven Van Asbroeck authored
commit 2472d64a upstream. The firmware loader queries if LSM/IMA permits it to load firmware via the sysfs fallback. Unfortunately, the code does the opposite: it expressly permits sysfs fw loading if security_kernel_load_data( LOADING_FIRMWARE) returns -EACCES. This happens because a zero-on-success return value is cast to a bool that's true on success. Fix the return value handling so we get the correct behaviour. Fixes: 6e852651 ("firmware: add call to LSM hook before firmware sysfs fallback") Cc: Stable <stable@vger.kernel.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Kees Cook <keescook@chromium.org> To: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Morse authored
commit 83b44fe3 upstream. The cacheinfo structures are alloced/freed by cpu online/offline callbacks. Originally these were only used by sysfs to expose the cache topology to user space. Without any in-kernel dependencies CPUHP_AP_ONLINE_DYN was an appropriate choice. resctrl has started using these structures to identify CPUs that share a cache. It updates its 'domain' structures from cpu online/offline callbacks. These depend on the cacheinfo structures (resctrl_online_cpu()->domain_add_cpu()->get_cache_id()-> get_cpu_cacheinfo()). These also run as CPUHP_AP_ONLINE_DYN. Now that there is an in-kernel dependency, move the cacheinfo work earlier so we know its done before resctrl's CPUHP_AP_ONLINE_DYN work runs. Fixes: 2264d9c7 ("x86/intel_rdt: Build structures for each resource based on cache topology") Cc: <stable@vger.kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20190624173656.202407-1-james.morse@arm.comSigned-off-by:
-
Masahiro Yamada authored
commit c32cc30c upstream. cpu_to_le32/le32_to_cpu is defined in include/linux/byteorder/generic.h, which is not exported to user-space. UAPI headers must use the ones prefixed with double-underscore. Detected by compile-testing exported headers: include/linux/nilfs2_ondisk.h: In function `nilfs_checkpoint_set_snapshot': include/linux/nilfs2_ondisk.h:536:17: error: implicit declaration of function `cpu_to_le32' [-Werror=implicit-function-declaration] cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) | \ ^ include/linux/nilfs2_ondisk.h:552:1: note: in expansion of macro `NILFS_CHECKPOINT_FNS' NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot) ^~~~~~~~~~~~~~~~~~~~ include/linux/nilfs2_ondisk.h:536:29: error: implicit declaration of function `le32_to_cpu' [-Werror=implicit-function-declaration] cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) | \ ^ include/linux/nilfs2_ondisk.h:552:1: note: in expansion of macro `NILFS_CHECKPOINT_FNS' NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot) ^~~~~~~~~~~~~~~~~~~~ include/linux/nilfs2_ondisk.h: In function `nilfs_segment_usage_set_clean': include/linux/nilfs2_ondisk.h:622:19: error: implicit declaration of function `cpu_to_le64' [-Werror=implicit-function-declaration] su->su_lastmod = cpu_to_le64(0); ^~~~~~~~~~~ Link: http://lkml.kernel.org/r/20190605053006.14332-1-yamada.masahiro@socionext.com Fixes: e63e88bc ("nilfs2: move ioctl interface and disk layout to uapi separately") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Cole Rogers authored
commit abbe3acd upstream. Thinkpad t480 laptops had some touchpad features disabled, resulting in the loss of pinch to activities in GNOME, on wayland, and other touch gestures being slower. This patch adds the touchpad of the t480 to the smbus_pnp_ids whitelist to enable the extra features. In my testing this does not break suspend (on fedora, with wayland, and GNOME, using the rc-6 kernel), while also fixing the feature on a T480. Signed-off-by:
Cole Rogers <colerogers@disroot.org> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Konstantin Khlebnikov authored
commit d17ba0f6 upstream. Driver does not want to keep packets in Tx queue when link is lost. But present code only reset NIC to flush them, but does not prevent queuing new packets. Moreover reset sequence itself could generate new packets via netconsole and NIC falls into endless reset loop. This patch wakes Tx queue only when NIC is ready to send packets. This is proper fix for problem addressed by commit 0f9e980b ("e1000e: fix cyclic resets at link up with active tx"). Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by:
Alexander Duyck <alexander.duyck@gmail.com> Tested-by:
Joseph Yasi <joe.yasi@gmail.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Tested-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Konstantin Khlebnikov authored
commit caff422e upstream. This reverts commit 0f9e980b. That change cased false-positive warning about hardware hang: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang: TDH <0> TDT <1> next_to_use <1> next_to_clean <0> buffer_info[next_to_clean]: time_stamp <fffba7a7> next_to_watch <0> jiffies <fffbb140> next_to_watch.status <0> MAC Status <40080080> PHY Status <7949> PHY 1000BASE-T Status <0> PHY Extended Status <3000> PCI Status <10> e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Besides warning everything works fine. Original issue will be fixed property in following patch. Signed-off-by:
-
- 14 Jul, 2019 5 commits
-
-
Greg Kroah-Hartman authored
-
Arnd Bergmann authored
commit fbd6b250 upstream. An earlier patch I sent reduced the stack usage enough to get below the warning limit, and I could show this was safe, but with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, it gets worse again because large stack variables in the same function no longer overlap: drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'translate_scan.isra.2': drivers/staging/rtl8712/rtl871x_ioctl_linux.c:322:1: error: the frame size of 1200 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Split out the largest two blocks in the affected function into two separate functions and mark those noinline_for_stack. Fixes: 8c5af16f ("staging: rtl8712: reduce stack usage") Fixes: 81a56f6d ("gcc-plugins: structleak: Generalize to all variable types") Signed-off-by:
-
Dave Stevenson authored
commit a26be06d upstream. The change to mapping V4L2 to MMAL buffers 1:1 didn't handle the condition we get with raw pixel buffers (eg YUV and RGB) direct from the camera's stills port. That sends the pixel buffer and then an empty buffer with the EOS flag set. The EOS buffer wasn't handled and returned an error up the stack. Handle the condition correctly by returning it to the component if streaming, or returning with an error if stopping streaming. Fixes: 93841670 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping") Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Dave Stevenson authored
commit bb8e9700 upstream. Before commit "staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping" there was a need to ensure that there were sufficient buffers supplied from the user to cover those being sent to the VPU (always 1). Now the buffers are linked 1:1 between MMAL and V4L2, therefore there is no need for that check, and indeed it is wrong as there is no need to submit all the buffers before starting streaming. Fixes: 93841670 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping") Signed-off-by:
-
Dave Stevenson authored
commit 70ec64cc upstream. With the recent change to match MMAL and V4L2 buffers there is a need to wait for all MMAL buffers to be returned during stop_streaming. Fixes: 93841670 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping") Signed-off-by:
-
