- 14 Feb, 2020 1 commit
-
-
Sergey Matyukevich authored
The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute. As a result, for strictly validated commands, it's assumed to not be supported. Signed-off-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 07 Feb, 2020 8 commits
-
-
Sergey Matyukevich authored
When preparing ethtool drvinfo, check if wiphy driver is defined before dereferencing it. Driver may not exist, e.g. if wiphy is attached to a virtual platform device. Signed-off-by:
-
Johannes Berg authored
We only use the parsing CRC for checking if a beacon changed, and elements with an ID > 63 cannot be represented in the filter. Thus, like we did before with WMM and Cisco vendor elements, just statically add these forgotten items to the CRC: - WLAN_EID_VHT_OPERATION - WLAN_EID_OPMODE_NOTIF I guess that in most cases when VHT/HE operation change, the HT operation also changed, and so the change was picked up, but we did notice that pure operating mode notification changes were ignored. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi [restrict to VHT for the mac80211 branch] Signed-off-by:
-
Sara Sharon authored
Previously I intended to ignore quiet mode in probe response, however I ended up ignoring it instead for action frames. As a matter of fact, this path isn't invoked for probe responses to start with. Just revert this patch. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Fixes: 7976b1e9 ("mac80211: ignore quiet mode in probe") Signed-off-by:
-
Johannes Berg authored
It turns out that this wasn't a good idea, I hit a test failure in hwsim due to this. That particular failure was easily worked around, but it raised questions: if an AP needs to, for example, send action frames to each connected station, the current limit is nowhere near enough (especially if those stations are sleeping and the frames are queued for a while.) Shuffle around some bits to make more room for ack_frame_id to allow up to 8192 queued up frames, that's enough for queueing 4 frames to each connected station, even at the maximum of 2007 stations on a single AP. We take the bits from band (which currently only 2 but I leave 3 in case we add another band) and from the hw_queue, which can only need 4 since it has a limit of 16 queues. Fixes: 6912daed ("mac80211: Shrink the size of ack_frame_id to make room for tx_time_est") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200115122549.b9a4ef9f4980.Ied52ed90150220b83a280009c590b65d125d087c@changeidSigned-off-by:
-
Florian Fainelli authored
b53_configure_vlan() is called by the bcm_sf2 driver upon setup and indirectly through resume as well. During the initial setup, we are guaranteed that dev->vlan_enabled is false, so there is no change in behavior, however during suspend, we may have enabled VLANs before, so we do want to restore that setting. Fixes: dad8d7c6 ("net: dsa: b53: Properly account for VLAN filtering") Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dejin Zheng authored
It forgot to reduce the value of the variable retry in a while loop in the ethqos_configure() function. It may cause an endless loop and without timeout. Fixes: a7c30e62 ("net: stmmac: Add driver for Qualcomm ethqos") Signed-off-by:
Dejin Zheng <zhengdejin5@gmail.com> Acked-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
David Howells authored
rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a put call, calls rxrpc_put_connection() which, deep in its bowels, takes a number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and local->client_conns_lock. RCU callbacks, however, are normally called from softirq context, which can cause lockdep to notice the locking inconsistency. To get lockdep to detect this, it's necessary to have the connection cleaned up on the put at the end of the last of its calls, though normally the clean up is deferred. This can be induced, however, by starting a call on an AF_RXRPC socket and then closing the socket without reading the reply. Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a workqueue if in softirq-mode and defer the destruction to process context. Note that another way to fix this could be to add a bunch of bh-disable annotations to the spinlocks concerned - and there might be more than just those two - but that means spending more time with BHs disabled. Note also that some of these places were covered by bh-disable spinlocks belonging to the rxrpc_transport object, but these got removed without the _bh annotation being retained on the next lock in. Fixes: 999b69f8 ("rxrpc: Kill the client connection bundle concept") Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com Signed-off-by:
David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> Signed-off-by:
-
David Howells authored
The recent patch that substituted a flag on an rxrpc_call for the connection pointer being NULL as an indication that a call was disconnected puts the set_bit in the wrong place for service calls. This is only a problem if a call is implicitly terminated by a new call coming in on the same connection channel instead of a terminating ACK packet. In such a case, rxrpc_input_implicit_end_call() calls __rxrpc_disconnect_call(), which is now (incorrectly) setting the disconnection bit, meaning that when rxrpc_release_call() is later called, it doesn't call rxrpc_disconnect_call() and so the call isn't removed from the peer's error distribution list and the list gets corrupted. KASAN finds the issue as an access after release on a call, but the position at which it occurs is confusing as it appears to be related to a different call (the call site is where the latter call is being removed from the error distribution list and either the next or pprev pointer points to a previously released call). Fix this by moving the setting of the flag from __rxrpc_disconnect_call() to rxrpc_disconnect_call() in the same place that the connection pointer was being cleared. Fixes: 5273a191 ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect") Signed-off-by:
-
- 06 Feb, 2020 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-02-06 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.19: ('net/mlx5: IPsec, Fix esp modify function attribute') ('net/mlx5: IPsec, fix memory leak at mlx5_fpga_ipsec_delete_sa_ctx') For -stable v5.4: ('net/mlx5: Deprecate usage of generic TLS HW capability bit') ('net/mlx5: Fix deadlock in fs_core') For -stable v5.5: ('net/mlx5e: TX, Error completion is for last WQE in batch') ==================== Signed-off-by: -
Tariq Toukan authored
Deprecate the generic TLS cap bit, use the new TX-specific TLS cap bit instead. Fixes: a12ff35e ("net/mlx5: Introduce TLS TX offload hardware bits and structures") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
For a cyclic work queue, when not requesting a completion per WQE, a single CQE might indicate the completion of several WQEs. However, in case some WQE in the batch causes an error, then an error completion is issued, breaking the batch, and pointing to the offending WQE in the wqe_counter field. Hence, WQE-specific error CQE handling (like printing, breaking, etc...) should be performed only for the last WQE in batch. Fixes: 130c7b46 ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events") Fixes: fd9b4be8 ("net/mlx5e: RX, Support multiple outstanding UMR posts") Signed-off-by:
Aya Levin <ayal@mellanox.com> Signed-off-by:
-
Raed Salem authored
SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx, however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function nullifies sa_ctx pointer without freeing the memory allocated, hence the memory leak. Fix by free SA context when the SA is released. Fixes: d6c4f029 ("net/mlx5: Refactor accel IPSec code") Signed-off-by:
Raed Salem <raeds@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
-
Raed Salem authored
The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used with negative negation as zero value indicates success but it used as failure return value instead. Fix by remove the unary not negation operator. Fixes: 05564d0a ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation") Signed-off-by:
-
Maor Gottlieb authored
free_match_list could be called when the flow table is already locked. We need to pass this notation to tree_put_node. It fixes the following lockdep warnning: [ 1797.268537] ============================================ [ 1797.276837] WARNING: possible recursive locking detected [ 1797.285101] 5.5.0-rc5+ #10 Not tainted [ 1797.291641] -------------------------------------------- [ 1797.299917] handler10/9296 is trying to acquire lock: [ 1797.307885] ffff889ad399a0a0 (&node->lock){++++}, at: tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.319694] [ 1797.319694] but task is already holding lock: [ 1797.330904] ffff889ad399a0a0 (&node->lock){++++}, at: nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core] [ 1797.344707] [ 1797.344707] other info that might help us debug this: [ 1797.356952] Possible unsafe locking scenario: [ 1797.356952] [ 1797.368333] CPU0 [ 1797.373357] ---- [ 1797.378364] lock(&node->lock); [ 1797.384222] lock(&node->lock); [ 1797.390031] [ 1797.390031] *** DEADLOCK *** [ 1797.390031] [ 1797.403003] May be due to missing lock nesting notation [ 1797.403003] [ 1797.414691] 3 locks held by handler10/9296: [ 1797.421465] #0: ffff889cf2c5a110 (&block->cb_lock){++++}, at: tc_setup_cb_add+0x70/0x250 [ 1797.432810] #1: ffff88a030081490 (&comp->sem){++++}, at: mlx5_devcom_get_peer_data+0x4c/0xb0 [mlx5_core] [ 1797.445829] #2: ffff889ad399a0a0 (&node->lock){++++}, at: nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core] [ 1797.459913] [ 1797.459913] stack backtrace: [ 1797.469436] CPU: 1 PID: 9296 Comm: handler10 Kdump: loaded Not tainted 5.5.0-rc5+ #10 [ 1797.480643] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 [ 1797.491480] Call Trace: [ 1797.496701] dump_stack+0x96/0xe0 [ 1797.502864] __lock_acquire.cold.63+0xf8/0x212 [ 1797.510301] ? lockdep_hardirqs_on+0x250/0x250 [ 1797.517701] ? mark_held_locks+0x55/0xa0 [ 1797.524547] ? quarantine_put+0xb7/0x160 [ 1797.531422] ? lockdep_hardirqs_on+0x17d/0x250 [ 1797.538913] lock_acquire+0xd6/0x1f0 [ 1797.545529] ? tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.553701] down_write+0x94/0x140 [ 1797.560206] ? tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.568464] ? down_write_killable_nested+0x170/0x170 [ 1797.576925] ? del_hw_flow_group+0xde/0x1f0 [mlx5_core] [ 1797.585629] tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.593891] ? free_match_list.part.25+0x147/0x170 [mlx5_core] [ 1797.603389] free_match_list.part.25+0xe0/0x170 [mlx5_core] [ 1797.612654] _mlx5_add_flow_rules+0x17e2/0x20b0 [mlx5_core] [ 1797.621838] ? lock_acquire+0xd6/0x1f0 [ 1797.629028] ? esw_get_prio_table+0xb0/0x3e0 [mlx5_core] [ 1797.637981] ? alloc_insert_flow_group+0x420/0x420 [mlx5_core] [ 1797.647459] ? try_to_wake_up+0x4c7/0xc70 [ 1797.654881] ? lock_downgrade+0x350/0x350 [ 1797.662271] ? __mutex_unlock_slowpath+0xb1/0x3f0 [ 1797.670396] ? find_held_lock+0xac/0xd0 [ 1797.677540] ? mlx5_add_flow_rules+0xdc/0x360 [mlx5_core] [ 1797.686467] mlx5_add_flow_rules+0xdc/0x360 [mlx5_core] [ 1797.695134] ? _mlx5_add_flow_rules+0x20b0/0x20b0 [mlx5_core] [ 1797.704270] ? irq_exit+0xa5/0x170 [ 1797.710764] ? retint_kernel+0x10/0x10 [ 1797.717698] ? mlx5_eswitch_set_rule_source_port.isra.9+0x122/0x230 [mlx5_core] [ 1797.728708] mlx5_eswitch_add_offloaded_rule+0x465/0x6d0 [mlx5_core] [ 1797.738713] ? mlx5_eswitch_get_prio_range+0x30/0x30 [mlx5_core] [ 1797.748384] ? mlx5_fc_stats_work+0x670/0x670 [mlx5_core] [ 1797.757400] mlx5e_tc_offload_fdb_rules.isra.27+0x24/0x90 [mlx5_core] [ 1797.767665] mlx5e_tc_add_fdb_flow+0xaf8/0xd40 [mlx5_core] [ 1797.776886] ? mlx5e_encap_put+0xd0/0xd0 [mlx5_core] [ 1797.785562] ? mlx5e_alloc_flow.isra.43+0x18c/0x1c0 [mlx5_core] [ 1797.795353] __mlx5e_add_fdb_flow+0x2e2/0x440 [mlx5_core] [ 1797.804558] ? mlx5e_tc_update_neigh_used_value+0x8c0/0x8c0 [mlx5_core] [ 1797.815093] ? wait_for_completion+0x260/0x260 [ 1797.823272] mlx5e_configure_flower+0xe94/0x1620 [mlx5_core] [ 1797.832792] ? __mlx5e_add_fdb_flow+0x440/0x440 [mlx5_core] [ 1797.842096] ? down_read+0x11a/0x2e0 [ 1797.849090] ? down_write+0x140/0x140 [ 1797.856142] ? mlx5e_rep_indr_setup_block_cb+0xc0/0xc0 [mlx5_core] [ 1797.866027] tc_setup_cb_add+0x11a/0x250 [ 1797.873339] fl_hw_replace_filter+0x25e/0x320 [cls_flower] [ 1797.882385] ? fl_hw_destroy_filter+0x1c0/0x1c0 [cls_flower] [ 1797.891607] fl_change+0x1d54/0x1fb6 [cls_flower] [ 1797.899772] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0 [cls_flower] [ 1797.910728] ? lock_downgrade+0x350/0x350 [ 1797.918187] ? __radix_tree_lookup+0xa5/0x130 [ 1797.926046] ? fl_set_key+0x1590/0x1590 [cls_flower] [ 1797.934611] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0 [cls_flower] [ 1797.945673] tc_new_tfilter+0xcd1/0x1240 [ 1797.953138] ? tc_del_tfilter+0xb10/0xb10 [ 1797.960688] ? avc_has_perm_noaudit+0x92/0x320 [ 1797.968721] ? avc_has_perm_noaudit+0x1df/0x320 [ 1797.976816] ? avc_has_extended_perms+0x990/0x990 [ 1797.985090] ? mark_lock+0xaa/0x9e0 [ 1797.991988] ? match_held_lock+0x1b/0x240 [ 1797.999457] ? match_held_lock+0x1b/0x240 [ 1798.006859] ? find_held_lock+0xac/0xd0 [ 1798.014045] ? symbol_put_addr+0x40/0x40 [ 1798.021317] ? rcu_read_lock_sched_held+0xd0/0xd0 [ 1798.029460] ? tc_del_tfilter+0xb10/0xb10 [ 1798.036810] rtnetlink_rcv_msg+0x4d5/0x620 [ 1798.044236] ? rtnl_bridge_getlink+0x460/0x460 [ 1798.052034] ? lockdep_hardirqs_on+0x250/0x250 [ 1798.059837] ? match_held_lock+0x1b/0x240 [ 1798.067146] ? find_held_lock+0xac/0xd0 [ 1798.074246] netlink_rcv_skb+0xc6/0x1f0 [ 1798.081339] ? rtnl_bridge_getlink+0x460/0x460 [ 1798.089104] ? netlink_ack+0x440/0x440 [ 1798.096061] netlink_unicast+0x2d4/0x3b0 [ 1798.103189] ? netlink_attachskb+0x3f0/0x3f0 [ 1798.110724] ? _copy_from_iter_full+0xda/0x370 [ 1798.118415] netlink_sendmsg+0x3ba/0x6a0 [ 1798.125478] ? netlink_unicast+0x3b0/0x3b0 [ 1798.132705] ? netlink_unicast+0x3b0/0x3b0 [ 1798.139880] sock_sendmsg+0x94/0xa0 [ 1798.146332] ____sys_sendmsg+0x36c/0x3f0 [ 1798.153251] ? copy_msghdr_from_user+0x165/0x230 [ 1798.160941] ? kernel_sendmsg+0x30/0x30 [ 1798.167738] ___sys_sendmsg+0xeb/0x150 [ 1798.174411] ? sendmsg_copy_msghdr+0x30/0x30 [ 1798.181649] ? lock_downgrade+0x350/0x350 [ 1798.188559] ? rcu_read_lock_sched_held+0xd0/0xd0 [ 1798.196239] ? __fget+0x21d/0x320 [ 1798.202335] ? do_dup2+0x2a0/0x2a0 [ 1798.208499] ? lock_downgrade+0x350/0x350 [ 1798.215366] ? __fget_light+0xd6/0xf0 [ 1798.221808] ? syscall_trace_enter+0x369/0x5d0 [ 1798.229112] __sys_sendmsg+0xd3/0x160 [ 1798.235511] ? __sys_sendmsg_sock+0x60/0x60 [ 1798.242478] ? syscall_trace_enter+0x233/0x5d0 [ 1798.249721] ? syscall_slow_exit_work+0x280/0x280 [ 1798.257211] ? do_syscall_64+0x1e/0x2e0 [ 1798.263680] do_syscall_64+0x72/0x2e0 [ 1798.269950] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: bd71b08e ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by:Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Florian Fainelli authored
After a number of suspend and resume cycles, it is possible for the RBUF to be stuck in Wake-on-LAN mode, despite the MPD enable bit being cleared which instructed the RBUF to exit that mode. Avoid creating that problematic condition by clearing the RX_EN and TX_EN bits in the UniMAC prior to disable the Magic Packet Detector logic which is guaranteed to make the RBUF exit Wake-on-LAN mode. Fixes: 83e82f4c ("net: systemport: add Wake-on-LAN support") Signed-off-by:
-
Heiner Kallweit authored
It turned out that on low performance systems the original change can cause lower tx performance. On a N3450-based mini-PC tx performance in iperf3 was reduced from 950Mbps to ~900Mbps. Therefore effectively revert the original change, just use pcie_set_readrq() now instead of changing the PCIe capability register directly. Fixes: 2df49d36 ("r8169: remove fiddling with the PCIe max read request size") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The bug is that we call kfree_skb(skb) and then pass "skb" to qdisc_pkt_len(skb) on the next line, which is a use after free. Also Cong Wang points out that it's better to delay the actual frees until we drop the rtnl lock so we should use rtnl_kfree_skbs() instead of kfree_skb(). Cc: Cong Wang <xiyou.wangcong@gmail.com> Fixes: ec97ecf1 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Qian Cai authored
sk_buff.qlen can be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96: unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821 net/unix/af_unix.c:1761 ____sys_sendmsg+0x33e/0x370 ___sys_sendmsg+0xa6/0xf0 __sys_sendmsg+0x69/0xf0 __x64_sys_sendmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99: __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029 __skb_try_recv_datagram+0xbe/0x220 unix_dgram_recvmsg+0xee/0x850 ____sys_recvmsg+0x1fb/0x210 ___sys_recvmsg+0xa2/0xf0 __sys_recvmsg+0x66/0xf0 __x64_sys_recvmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe Since only the read is operating as lockless, it could introduce a logic bug in unix_recvq_full() due to the load tearing. Fix it by adding a lockless variant of skb_queue_len() and unix_recvq_full() where READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to the commit d7d16a89 ("net: add skb_queue_empty_lockless()"). Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Lorenzo Bianconi authored
Move rx_dropped and rx_errors counters in mvneta_pcpu_stats in order to avoid possible races updating statistics Fixes: 562e2f46 ("net: mvneta: Improve the buffer allocation method for SWBM") Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management") Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Devulapally Shiva Krishna authored
Added debugfs entry to show the tls stats. Signed-off-by:
Devulapally Shiva Krishna <shiva@chelsio.com> Signed-off-by:
Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by:
-
Florian Westphal authored
Turns out that when we accept a new subflow, the newly created inet_sk(tcp_sk)->pinet6 points at the ipv6_pinfo structure of the listener socket. This wasn't caught by the selftest because it closes the accepted fd before the listening one. adding a close(listenfd) after accept returns is enough: BUG: KASAN: use-after-free in inet6_getname+0x6ba/0x790 Read of size 1 at addr ffff88810e310866 by task mptcp_connect/2518 Call Trace: inet6_getname+0x6ba/0x790 __sys_getpeername+0x10b/0x250 __x64_sys_getpeername+0x6f/0xb0 also alter test program to exercise this. Reported-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 05 Feb, 2020 18 commits
-
-
Sudarsana Reddy Kalluru authored
commit cedeac9d ("qed: Add support for Timestamping the unicast PTP packets.") handles the timestamping of L4 ptp packets only. This patch adds driver changes to detect/timestamp both L2/L4 unicast PTP packets. Fixes: cedeac9d ("qed: Add support for Timestamping the unicast PTP packets.") Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
David S. Miller authored
Harini Katakam says: ==================== macb: TSO bug fixes An IP errata was recently discovered when testing TSO enabled versions with perf test tools where a false amba error is reported by the IP. Some ways to reproduce would be to use iperf or applications with payload descriptor sizes very close to 16K. Once the error is observed TXERR (or bit 6 of ISR) will be constantly triggered leading to a series of tx path error handling and clean up. Workaround the same by limiting this size to 0x3FC0 as recommended by Cadence. There was no performance impact on 1G system that I tested with. Note on patch 1: The alignment code may be unused but leaving it there in case anyone is using UFO. Added Fixes tag to patch 1. ==================== Signed-off-by: -
Harini Katakam authored
GEM_MAX_TX_LEN currently resolves to 0x3FF8 for any IP version supporting TSO with full 14bits of length field in payload descriptor. But an IP errata causes false amba_error (bit 6 of ISR) when length in payload descriptors is specified above 16387. The error occurs because the DMA falsely concludes that there is not enough space in SRAM for incoming payload. These errors were observed continuously under stress of large packets using iperf on a version where SRAM was 16K for each queue. This errata will be documented shortly and affects all versions since TSO functionality was added. Hence limit the max length to 0x3FC0 (rounded). Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
-
Harini Katakam authored
The IP TSO implementation does NOT require the length to be a multiple of 8. That is only a requirement for UFO as per IP documentation. Hence, exit macb_features_check function in the beginning if the protocol is not UDP. Only when it is UDP, proceed further to the alignment checks. Update comments to reflect the same. Also remove dead code checking for protocol TCP when calculating header length. Fixes: 1629dd4f ("cadence: Add LSO support.") Signed-off-by:
-
Eric Dumazet authored
syzbot managed to send an IPX packet through bond_alb_xmit() and af_packet and triggered a use-after-free. First, bond_alb_xmit() was using ipx_hdr() helper to reach the IPX header, but ipx_hdr() was using the transport offset instead of the network offset. In the particular syzbot report transport offset was 0xFFFF This patch removes ipx_hdr() since it was only (mis)used from bonding. Then we need to make sure IPv4/IPv6/IPX headers are pulled in skb->head before dereferencing anything. BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452 Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108 (if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: [<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline] [<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53 [<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282 [<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline] [<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline] [<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422 [<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469 [<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452 [<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline] [<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224 [<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline] [<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline] [<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline] [<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627 [<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238 [<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278 [<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline] [<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252 [<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline] [<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684 [<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996 [<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline] [<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Jacob Keller authored
commit fdd41ec2 ("devlink: Return right error code in case of errors for region read") modified the region read code to report errors properly in unexpected cases. In the case where the start_offset and ret_offset match, it unilaterally converted this into an error. This causes an issue for the "dump" version of the command. In this case, the devlink region dump will always report an invalid argument: 000000000000ffd0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000000000ffe0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff devlink answers: Invalid argument 000000000000fff0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff This occurs because the expected flow for the dump is to return 0 after there is no further data. The simplest fix would be to stop converting the error code to -EINVAL if start_offset == ret_offset. However, avoid unnecessary work by checking for when start_offset is larger than the region size and returning 0 upfront. Fixes: fdd41ec2 ("devlink: Return right error code in case of errors for region read") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Moritz Fischer authored
The receive frame length calculation uses a wrong mask to calculate the length of the received frames. Per spec table 4-1 the length is contained in the FL (Frame Length) field in bits 30:16. This didn't show up as an issue so far since frames were limited to 1500 bytes which falls within the 11 bit window. Signed-off-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
-
David S. Miller authored
Jason A. Donenfeld says: ==================== wireguard fixes for 5.6-rc1 Here are fixes for WireGuard before 5.6-rc1 is tagged. It includes: 1) A fix for a UaF (caused by kmalloc failing during a very small allocation) that syzkaller found, from Eric Dumazet. 2) A fix for a deadlock that syzkaller found, along with an additional selftest to ensure that the bug fix remains correct, from me. 3) Two little fixes/cleanups to the selftests from Krzysztof Kozlowski and me. ==================== Signed-off-by: -
Jason A. Donenfeld authored
Without this, we wind up proceeding too early sometimes when the previous process has just used the same listening port. So, we tie the listening socket query to the specific pid we're interested in. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Krzysztof Kozlowski authored
CONFIG_ENABLE_WARN_DEPRECATED is gone since commit 771c0353 ("deprecate the '__deprecated' attribute warnings entirely and for good"). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Jason A. Donenfeld authored
Ensure that peers with low order points are ignored, both in the case where we already have a device private key and in the case where we do not. This adds points that naturally give a zero output. Signed-off-by:
-
Jason A. Donenfeld authored
Our static-static calculation returns a failure if the public key is of low order. We check for this when peers are added, and don't allow them to be added if they're low order, except in the case where we haven't yet been given a private key. In that case, we would defer the removal of the peer until we're given a private key, since at that point we're doing new static-static calculations which incur failures we can act on. This meant, however, that we wound up removing peers rather late in the configuration flow. Syzkaller points out that peer_remove calls flush_workqueue, which in turn might then wait for sending a handshake initiation to complete. Since handshake initiation needs the static identity lock, holding the static identity lock while calling peer_remove can result in a rare deadlock. We have precisely this case in this situation of late-stage peer removal based on an invalid public key. We can't drop the lock when removing, because then incoming handshakes might interact with a bogus static-static calculation. While the band-aid patch for this would involve breaking up the peer removal into two steps like wg_peer_remove_all does, in order to solve the locking issue, there's actually a much more elegant way of fixing this: If the static-static calculation succeeds with one private key, it *must* succeed with all others, because all 32-byte strings map to valid private keys, thanks to clamping. That means we can get rid of this silly dance and locking headaches of removing peers late in the configuration flow, and instead just reject them early on, regardless of whether the device has yet been assigned a private key. For the case where the device doesn't yet have a private key, we safely use zeros just for the purposes of checking for low order points by way of checking the output of the calculation. The following PoC will trigger the deadlock: ip link add wg0 type wireguard ip addr add 10.0.0.1/24 dev wg0 ip link set wg0 up ping -f 10.0.0.2 & while true; do wg set wg0 private-key /dev/null peer AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= allowed-ips 10.0.0.0/24 endpoint 10.0.0.3:1234 wg set wg0 private-key <(echo AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=) done [ 0.949105] ====================================================== [ 0.949550] WARNING: possible circular locking dependency detected [ 0.950143] 5.5.0-debug+ #18 Not tainted [ 0.950431] ------------------------------------------------------ [ 0.950959] wg/89 is trying to acquire lock: [ 0.951252] ffff8880333e2128 ((wq_completion)wg-kex-wg0){+.+.}, at: flush_workqueue+0xe3/0x12f0 [ 0.951865] [ 0.951865] but task is already holding lock: [ 0.952280] ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0 [ 0.953011] [ 0.953011] which lock already depends on the new lock. [ 0.953011] [ 0.953651] [ 0.953651] the existing dependency chain (in reverse order) is: [ 0.954292] [ 0.954292] -> #2 (&wg->static_identity.lock){++++}: [ 0.954804] lock_acquire+0x127/0x350 [ 0.955133] down_read+0x83/0x410 [ 0.955428] wg_noise_handshake_create_initiation+0x97/0x700 [ 0.955885] wg_packet_send_handshake_initiation+0x13a/0x280 [ 0.956401] wg_packet_handshake_send_worker+0x10/0x20 [ 0.956841] process_one_work+0x806/0x1500 [ 0.957167] worker_thread+0x8c/0xcb0 [ 0.957549] kthread+0x2ee/0x3b0 [ 0.957792] ret_from_fork+0x24/0x30 [ 0.958234] [ 0.958234] -> #1 ((work_completion)(&peer->transmit_handshake_work)){+.+.}: [ 0.958808] lock_acquire+0x127/0x350 [ 0.959075] process_one_work+0x7ab/0x1500 [ 0.959369] worker_thread+0x8c/0xcb0 [ 0.959639] kthread+0x2ee/0x3b0 [ 0.959896] ret_from_fork+0x24/0x30 [ 0.960346] [ 0.960346] -> #0 ((wq_completion)wg-kex-wg0){+.+.}: [ 0.960945] check_prev_add+0x167/0x1e20 [ 0.961351] __lock_acquire+0x2012/0x3170 [ 0.961725] lock_acquire+0x127/0x350 [ 0.961990] flush_workqueue+0x106/0x12f0 [ 0.962280] peer_remove_after_dead+0x160/0x220 [ 0.962600] wg_set_device+0xa24/0xcc0 [ 0.962994] genl_rcv_msg+0x52f/0xe90 [ 0.963298] netlink_rcv_skb+0x111/0x320 [ 0.963618] genl_rcv+0x1f/0x30 [ 0.963853] netlink_unicast+0x3f6/0x610 [ 0.964245] netlink_sendmsg+0x700/0xb80 [ 0.964586] __sys_sendto+0x1dd/0x2c0 [ 0.964854] __x64_sys_sendto+0xd8/0x1b0 [ 0.965141] do_syscall_64+0x90/0xd9a [ 0.965408] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 0.965769] [ 0.965769] other info that might help us debug this: [ 0.965769] [ 0.966337] Chain exists of: [ 0.966337] (wq_completion)wg-kex-wg0 --> (work_completion)(&peer->transmit_handshake_work) --> &wg->static_identity.lock [ 0.966337] [ 0.967417] Possible unsafe locking scenario: [ 0.967417] [ 0.967836] CPU0 CPU1 [ 0.968155] ---- ---- [ 0.968497] lock(&wg->static_identity.lock); [ 0.968779] lock((work_completion)(&peer->transmit_handshake_work)); [ 0.969345] lock(&wg->static_identity.lock); [ 0.969809] lock((wq_completion)wg-kex-wg0); [ 0.970146] [ 0.970146] *** DEADLOCK *** [ 0.970146] [ 0.970531] 5 locks held by wg/89: [ 0.970908] #0: ffffffff827433c8 (cb_lock){++++}, at: genl_rcv+0x10/0x30 [ 0.971400] #1: ffffffff82743480 (genl_mutex){+.+.}, at: genl_rcv_msg+0x642/0xe90 [ 0.971924] #2: ffffffff827160c0 (rtnl_mutex){+.+.}, at: wg_set_device+0x9f/0xcc0 [ 0.972488] #3: ffff888032819de0 (&wg->device_update_lock){+.+.}, at: wg_set_device+0xb0/0xcc0 [ 0.973095] #4: ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0 [ 0.973653] [ 0.973653] stack backtrace: [ 0.973932] CPU: 1 PID: 89 Comm: wg Not tainted 5.5.0-debug+ #18 [ 0.974476] Call Trace: [ 0.974638] dump_stack+0x97/0xe0 [ 0.974869] check_noncircular+0x312/0x3e0 [ 0.975132] ? print_circular_bug+0x1f0/0x1f0 [ 0.975410] ? __kernel_text_address+0x9/0x30 [ 0.975727] ? unwind_get_return_address+0x51/0x90 [ 0.976024] check_prev_add+0x167/0x1e20 [ 0.976367] ? graph_lock+0x70/0x160 [ 0.976682] __lock_acquire+0x2012/0x3170 [ 0.976998] ? register_lock_class+0x1140/0x1140 [ 0.977323] lock_acquire+0x127/0x350 [ 0.977627] ? flush_workqueue+0xe3/0x12f0 [ 0.977890] flush_workqueue+0x106/0x12f0 [ 0.978147] ? flush_workqueue+0xe3/0x12f0 [ 0.978410] ? find_held_lock+0x2c/0x110 [ 0.978662] ? lock_downgrade+0x6e0/0x6e0 [ 0.978919] ? queue_rcu_work+0x60/0x60 [ 0.979166] ? netif_napi_del+0x151/0x3b0 [ 0.979501] ? peer_remove_after_dead+0x160/0x220 [ 0.979871] peer_remove_after_dead+0x160/0x220 [ 0.980232] wg_set_device+0xa24/0xcc0 [ 0.980516] ? deref_stack_reg+0x8e/0xc0 [ 0.980801] ? set_peer+0xe10/0xe10 [ 0.981040] ? __ww_mutex_check_waiters+0x150/0x150 [ 0.981430] ? __nla_validate_parse+0x163/0x270 [ 0.981719] ? genl_family_rcv_msg_attrs_parse+0x13f/0x310 [ 0.982078] genl_rcv_msg+0x52f/0xe90 [ 0.982348] ? genl_family_rcv_msg_attrs_parse+0x310/0x310 [ 0.982690] ? register_lock_class+0x1140/0x1140 [ 0.983049] netlink_rcv_skb+0x111/0x320 [ 0.983298] ? genl_family_rcv_msg_attrs_parse+0x310/0x310 [ 0.983645] ? netlink_ack+0x880/0x880 [ 0.983888] genl_rcv+0x1f/0x30 [ 0.984168] netlink_unicast+0x3f6/0x610 [ 0.984443] ? netlink_detachskb+0x60/0x60 [ 0.984729] ? find_held_lock+0x2c/0x110 [ 0.984976] netlink_sendmsg+0x700/0xb80 [ 0.985220] ? netlink_broadcast_filtered+0xa60/0xa60 [ 0.985533] __sys_sendto+0x1dd/0x2c0 [ 0.985763] ? __x64_sys_getpeername+0xb0/0xb0 [ 0.986039] ? sockfd_lookup_light+0x17/0x160 [ 0.986397] ? __sys_recvmsg+0x8c/0xf0 [ 0.986711] ? __sys_recvmsg_sock+0xd0/0xd0 [ 0.987018] __x64_sys_sendto+0xd8/0x1b0 [ 0.987283] ? lockdep_hardirqs_on+0x39b/0x5a0 [ 0.987666] do_syscall_64+0x90/0xd9a [ 0.987903] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 0.988223] RIP: 0033:0x7fe77c12003e [ 0.988508] Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 4 [ 0.989666] RSP: 002b:00007fffada2ed58 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 0.990137] RAX: ffffffffffffffda RBX: 00007fe77c159d48 RCX: 00007fe77c12003e [ 0.990583] RDX: 0000000000000040 RSI: 000055fd1d38e020 RDI: 0000000000000004 [ 0.991091] RBP: 000055fd1d38e020 R08: 000055fd1cb63358 R09: 000000000000000c [ 0.991568] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000002c [ 0.992014] R13: 0000000000000004 R14: 000055fd1d38e020 R15: 0000000000000001 Signed-off-by: -
Eric Dumazet authored
In the unlikely case a new node could not be allocated, we need to remove @newnode from @peer->allowedips_list before freeing it. syzbot reported: BUG: KASAN: use-after-free in __list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54 Read of size 8 at addr ffff88809881a538 by task syz-executor.4/30133 CPU: 0 PID: 30133 Comm: syz-executor.4 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 __list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54 __list_del_entry include/linux/list.h:132 [inline] list_del include/linux/list.h:146 [inline] root_remove_peer_lists+0x24f/0x4b0 drivers/net/wireguard/allowedips.c:65 wg_allowedips_free+0x232/0x390 drivers/net/wireguard/allowedips.c:300 wg_peer_remove_all+0xd5/0x620 drivers/net/wireguard/peer.c:187 wg_set_device+0xd01/0x1350 drivers/net/wireguard/netlink.c:542 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 genl_rcv+0x29/0x40 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45b399 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f99a9bcdc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f99a9bce6d4 RCX: 000000000045b399 RDX: 0000000000000000 RSI: 0000000020001340 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004 R13: 00000000000009ba R14: 00000000004cb2b8 R15: 0000000000000009 Allocated by task 30103: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 kmem_cache_alloc_trace+0x158/0x790 mm/slab.c:3551 kmalloc include/linux/slab.h:556 [inline] kzalloc include/linux/slab.h:670 [inline] add+0x70a/0x1970 drivers/net/wireguard/allowedips.c:236 wg_allowedips_insert_v4+0xf6/0x160 drivers/net/wireguard/allowedips.c:320 set_allowedip drivers/net/wireguard/netlink.c:343 [inline] set_peer+0xfb9/0x1150 drivers/net/wireguard/netlink.c:468 wg_set_device+0xbd4/0x1350 drivers/net/wireguard/netlink.c:591 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 genl_rcv+0x29/0x40 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 30103: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 add+0x12d2/0x1970 drivers/net/wireguard/allowedips.c:266 wg_allowedips_insert_v4+0xf6/0x160 drivers/net/wireguard/allowedips.c:320 set_allowedip drivers/net/wireguard/netlink.c:343 [inline] set_peer+0xfb9/0x1150 drivers/net/wireguard/netlink.c:468 wg_set_device+0xbd4/0x1350 drivers/net/wireguard/netlink.c:591 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 genl_rcv+0x29/0x40 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88809881a500 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 56 bytes inside of 64-byte region [ffff88809881a500, ffff88809881a540) The buggy address belongs to the page: page:ffffea0002620680 refcount:1 mapcount:0 mapping:ffff8880aa400380 index:0x0 raw: 00fffe0000000200 ffffea000250b748 ffffea000254bac8 ffff8880aa400380 raw: 0000000000000000 ffff88809881a000 0000000100000020 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88809881a400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88809881a480: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc >ffff88809881a500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff88809881a580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88809881a600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by: -
Cong Wang authored
Jakub noticed there is a potential resource leak in tcindex_set_parms(): when tcindex_filter_result_init() fails and it jumps to 'errout1' which doesn't release the memory and resources allocated by tcindex_alloc_perfect_hash(). We should just jump to 'errout_alloc' which calls tcindex_free_perfect_hash(). Fixes: b9a24bb7 ("net_sched: properly handle failure case of tcf_exts_init()") Reported-by:
Jakub Kicinski <kuba@kernel.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Florian Westphal authored
When an mptcp socket connects to a tcp peer or when a middlebox interferes with tcp options, mptcp needs to fall back to plain tcp. Problem is that mptcp is trying to be too clever in this case: It attempts to close the mptcp meta sk and transparently replace it with the (only) subflow tcp sk. Unfortunately, this is racy -- the socket is already exposed to userspace. Any parallel calls to send/recv/setsockopt etc. can cause use-after-free: BUG: KASAN: use-after-free in atomic_try_cmpxchg include/asm-generic/atomic-instrumented.h:693 [inline] CPU: 1 PID: 2083 Comm: syz-executor.1 Not tainted 5.5.0 #2 atomic_try_cmpxchg include/asm-generic/atomic-instrumented.h:693 [inline] queued_spin_lock include/asm-generic/qspinlock.h:78 [inline] do_raw_spin_lock include/linux/spinlock.h:181 [inline] __raw_spin_lock_bh include/linux/spinlock_api_smp.h:136 [inline] _raw_spin_lock_bh+0x71/0xd0 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:343 [inline] __lock_sock+0x105/0x190 net/core/sock.c:2414 lock_sock_nested+0x10f/0x140 net/core/sock.c:2938 lock_sock include/net/sock.h:1516 [inline] mptcp_setsockopt+0x2f/0x1f0 net/mptcp/protocol.c:800 __sys_setsockopt+0x152/0x240 net/socket.c:2130 __do_sys_setsockopt net/socket.c:2146 [inline] __se_sys_setsockopt net/socket.c:2143 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2143 do_syscall_64+0xb7/0x3d0 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 While the use-after-free can be resolved, there is another problem: sock->ops and sock->sk assignments are not atomic, i.e. we may get calls into mptcp functions with sock->sk already pointing at the subflow socket, or calls into tcp functions with a mptcp meta sk. Remove the fallback code and call the relevant functions for the (only) subflow in case the mptcp socket is connected to tcp peer. Reported-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by:
-
Andy Shevchenko authored
Replace with appropriate types.h. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Andy Shevchenko authored
Replace with appropriate types.h. Signed-off-by:
-
kbuild test robot authored
drivers/net/netdevsim/dev.c:937:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: 6556ff32 ("netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs") CC: Taehee Yoo <ap420073@gmail.com> Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
