- 11 May, 2021 1 commit
-
-
Werner Sembach authored
Moves some checks that later will be performed 2 times to an own function. This avoids duplicate code later on. Signed-off-by:
Werner Sembach <wse@tuxedocomputers.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210510133349.14491-2-wse@tuxedocomputers.com
-
- 10 May, 2021 4 commits
-
-
Lucas De Marchi authored
Instead of poluting the normal code path in intel_display.c, make intel_bios.c handle the brokenness of the VBT. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210430223808.1078010-5-lucas.demarchi@intel.com
-
Lucas De Marchi authored
Direction on gen9+ was to stop reading the straps and only rely on the VBT for marking the port presence. This happened while dealing with WaIgnoreDDIAStrap and instead of using it as a WA, it should now be the normal flow. See commit 885d3e5b ("drm/i915/display: fix comment on skl straps"). For gen 10 it's hard to say if this will work or not since I can't test it, so leave it with the same behavior as before. For PCH_TGP we should still rely on the VBT to make ports E and F not available. v2 (Ville): - use display ver >= 9 to make it consistent with the rest of the driver instead of checking for == 9 - also handle CNL and only initialize port F if it is IS_CNL_WITH_PORT_F. Eventually CNL may be removed, but while it isn't let's keep it consistent everywhere Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
-
Lucas De Marchi authored
Direction on gen >= 9 was to stop using straps and rely on VBT indicating if the port is present or not. Remove FIXME comment since this will never be "fixed". Signed-off-by:
-
Lucas De Marchi authored
Since commit 45c0673a ("drm/i915/bios: start using the intel_bios_encoder_data directly") we lookup the devdata for each port in intel_ddi_init() and just return if the port is not present in VBT (or if we didn't create a fake devdata for it if VBT is not available). So in intel_display.c we don't have to check intel_bios_is_port_present(), just rely on the check in intel_ddi_init(). v2: Rebase on commit 45c0673a ("drm/i915/bios: start using the intel_bios_encoder_data directly") re-using that check in intel_ddi_init() instead of adding a new one. Signed-off-by:
-
- 07 May, 2021 12 commits
-
-
Imre Deak authored
Enable padding of DPT FB strides to POT, using the FB remapping logic. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
The specification only requires DPT FB strides to be POT aligned, but there seems to be also a minimum of 8 stride tile requirement. Scanning out FBs with < 8 stride tiles will result in pipe faults (even though the stride is POT aligned). Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-10-imre.deak@intel.com
-
Imre Deak authored
The latest specification removed the support for 90/270 FB rotation on ADL_P, even though legacy Y-tiled surfaces are supported. Align the code accordingly. Signed-off-by:
-
José Roberto de Souza authored
Alderlake-P have a new stride restriction when using DPT and it is used by non linear framebuffers. Stride needs to be a power of two to take full DPT rows, but stride is a parameter set by userspace. What we could do is use a fake stride when doing DPT allocation so HW requirements are met and userspace don't need to be changed to met this power of two restrictions but this change will take a while to be implemented so for now adding this restriction in driver to reject atomic commits that would cause visual corruptions. BSpec: 53393 Acked-by:
Matt Roper <matthew.d.roper@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-8-imre.deak@intel.com
-
Juha-Pekka Heikkilä authored
XE_LPD supports plane strides up to 128KB. Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com> Signed-off-by:
-
José Roberto de Souza authored
GTT remapping allow us to have planes with strides larger than HW supports but DPT + GTT remapping is still not properly handled so falling back to plane HW limitations for now. This patch can be dropped when DPT + GTT remapping is correctly handled but until then we need this limitation for all display13 platforms to avoid pipe faults. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Clint Taylor <Clinton.A.Taylor@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Suggested-by:
-
Ville Syrjälä authored
Add support for DPT (display page table). DPT is a slightly peculiar two level page table scheme used for tiled scanout buffers (linear uses direct ggtt mapping still). The plane surface address will point at a page in the DPT which holds the PTEs for 512 actual pages. Thus we require 1/512 of the ggttt address space compared to a direct ggtt mapping. We create a new DPT address space for each framebuffer and track two vmas (one for the DPT, another for the ggtt). TODO: - Is the i915_address_space approaach sane? - Maybe don't map the whole DPT to write the PTEs? - Deal with remapping/rotation? Need to create a separate DPT for each remapped/rotated plane I guess. Or else we'd need to make the per-fb DPT large enough to support potentially several remapped/rotated vmas. How large should that be? Signed-off-by:
Bommu Krishnaiah <krishnaiah.bommu@intel.com> Cc: Wilson Chris P <Chris.P.Wilson@intel.com> Cc: Tang CQ <cq.tang@intel.com> Cc: Auld Matthew <matthew.auld@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Reviewed-by:
Wilson Chris P <Chris.P.Wilson@intel.com> Signed-off-by:
-
Clinton Taylor authored
Add ADL-P to the device_info table and support MACROS. Bspec: 49185, 55372, 55373 Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Clinton Taylor authored
Add 18 known PCI device IDs Bspec: 55376 Cc: Caz Yokoyama <caz.yokoyama@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
Let's start preparing for upcoming platforms that will use an XE_LPD design. v2: - Use the now-preferred "XE_LPD" term to refer to this design - Utilize DISPLAY_VER() rather than a feature flag - Drop unused mbus_size field (Lucas) v3: - Adjust for dbuf.{size,slice_mask} (Ville) Signed-off-by: -
Ville Syrjälä authored
When scanning out NV12 if we at any time have the plane enabled while the scaler is disabled we get a pretty catastrophic underrun. Let's reorder the operations so that we try to avoid that happening even if our vblank evade fails and the scaler enable/disable and the plane enable/disable get latched during two diffent frames. This takes care of the most common cases. I suppose there is still at least a theoretical possibility of hitting this if one plane takes the scaler away from another plane before the second plane had a chance to set up another scaler for its use. But that is starting to get a bit complicated, especially since the plane commit order already has to be carefully sequenced to avoid any dbuf overlaps. So plugging this 100% may prove somewhat hard... Cc: Cooper Chiou <cooper.chiou@intel.com> Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
I doubt anyone has used the display error state since CS flips went the way of the dodo. Just nuke it. It might be semi interesting to have something like this for FIFO underruns and the like, but as it stands this wouldn't provide a sufficient amount of information. So would need an extensive rewrite anyway. The lockless power well handling is also racy, so this could just be contributing noise to test results if we end up accessing something with the relevant power well already disabled. Signed-off-by:
-
- 06 May, 2021 1 commit
-
-
José Roberto de Souza authored
The implementation of two workarounds are missing causing failures in CI with pre-production HW. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210505213801.80772-1-jose.souza@intel.com
-
- 05 May, 2021 8 commits
-
-
Ville Syrjälä authored
Replace the hand rolled PLL lock bit waits with intel_de_wait_for_*(). Signed-off-by:
-
Ville Syrjälä authored
Replace the hand rolled rmw sequences with intel_de_rmw(). Signed-off-by:
-
Ville Syrjälä authored
Replace the hand rolled rmw sequences with intel_de_rmw(). Signed-off-by:
-
Ville Syrjälä authored
Replace the hand rolled rmw sequences with intel_de_rmw(). Jani pointed out that intel_de_rmw() skips the write if the value does not change. That should be totally fine here, but let's at least acknowledge the change in behaviour in case I'm somehow wrong... Signed-off-by:
-
Ville Syrjälä authored
Extract a few of the switch statements into helper functions to reduce the pollution in the cdclk programming functions. Signed-off-by:
-
Ville Syrjälä authored
We lost the i915_reg_rw tracepoint for a lot of display registers when we switched from the heavyweight normal register accessors to the lightweight _fw() variants. See eg. commit dd584fc0 ("drm/i915: Use I915_READ_FW for plane updates"). Put the tracepoints back so that the register traces might actually be useful. Hopefully these should be close to free when the tracepoint is not enabled and thus not slow down our vblank critical sections significantly. v2: Copy paste the same-cacheline-hang warning from intel_uncore.h (Anshuman) Cc: Cooper Chiou <cooper.chiou@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Hoist the intel_de.h include from intel_display_types.h one level up. I need this in order to untangle the include order so that I can add tracepoints into intel_de.h. This little cocci script did most of the work for me: @find@ @@ ( intel_de_read(...) | intel_de_read_fw(...) | intel_de_write(...) | intel_de_write_fw(...) ) @has_include@ @@ ( #include "intel_de.h" | #include "display/intel_de.h" ) @depends on find && !has_include@ @@ + #include "intel_de.h" #include "intel_display_types.h" @depends on find && !has_include@ @@ + #include "display/intel_de.h" #include "display/intel_display_types.h" Cc: Cooper Chiou <cooper.chiou@intel.com> Reviewed-by:
-
Imre Deak authored
Make sure that the XYUV8888 format is handled correctly when it's used with a MC_CCS modifier framebuffer. Besides this format not working, the driver will also return an incorrect error value when trying to use it, indicating that the second color plane in the framebuffer is set unexpectedly. Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210501002853.4132009-1-imre.deak@intel.com
-
- 04 May, 2021 3 commits
-
-
Imre Deak authored
Make one step to pass intel_framebuffer to all intel_fb functions. Signed-off-by:
-
Jani Nikula authored
Cleanup the code. No functional changes. Reviewed-by:
-
Jani Nikula authored
Lift the masking outside of the if branches. No functional changes. Reviewed-by:
-
- 03 May, 2021 2 commits
-
-
Jani Nikula authored
Registering multiple backlight devices with intel_backlight name will obviously fail, regardless of whether they're two connectors in the same drm device or two different drm devices. It would be preferrable to switch to completely unique names, and sunset the generic intel_backlight name. However, there are apparently users out there that hardcode the name, so the change would break backward compatibility. As a compromise, register the first device with intel_backlight name. In the common case, this is the only backlight device anyway. From the second device on, use card%d-%s-backlight format, for example card0-eDP-2-backlight, to make the name unique. This approach does not preclude us from registering the first device using the same naming scheme in the future. v2: Keep using intel_backlight name for first backlight device Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2794Reviewed-by:
-
Jani Nikula authored
Add connector and backlight device name to logging, and propagate error code from backlight_device_register() instead of flattening to -ENODEV. Storing the name in an allocated buffer is unnecessary here, but makes follow-up work on names much cleaner. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
- 29 Apr, 2021 1 commit
-
-
Anand Moon authored
As per Bspec: 53655 Update PCI ids for Mobile BGA. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Anand Moon <anandx.ram.moon@intel.com> Reviewed-by:
Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
-
- 28 Apr, 2021 6 commits
-
-
Ville Syrjälä authored
Add some tracpoints for frontbuffer tracking so we can try to figure out what's going on. Signed-off-by:
-
Ville Syrjälä authored
The pipe crc code slipped theough the net when we tried to eliminate all crtc->index==pipe abuses. Remedy that. And while at it get rid of those nasty intel_crtc+drm_crtc pointer aliases. Signed-off-by:
-
Ville Syrjälä authored
A bunch of files have a stray newline at the end. Remove it. Signed-off-by:
-
Ville Syrjälä authored
DP v1.1+ says: "The DisplayPort transmitter, which is the driving end for a request transaction, pre-charges the AUX-CH+ and AUX-CH- to a common mode voltage by transmitting 10 to 16 consecutive 0’s in Manchester II code. After the active pre-charge, the transmitter sends an AUX Sync pattern. The AUX Sync pattern must be as follows: Start with 16 consecutive 0s in Manchester-II code, which results in a transition from low to high in the middle of each bit period. Including active pre-charge pulses, there shall be 26 to 32 consecutive 0s before the end of the AUX_SYNC pattern." BDW bspec says: "Used to determine the precharge time for the Aux Channel. During this time the Aux Channel will drive the SYNC pattern. Every microsecond gives one additional SYNC pulse beyond the hard coded 26 SYNC pulses. The value is the number of microseconds times 2. Default is 3 decimal which gives 6us of precharge which is 6 extra SYN pulses for a total of 32." CPT bspec says the same thing apart from: "... Default is 5 decimal which gives 10us of precharge which is 10 extra SYNC pulses for a total of 36." So it looks like to match the max of 32 of the DP spec we should just always program this extra precharge time to 3. Unfortunately g4x/ibx bspec doesn't have this clarification, but since the cpt default was still the same 5 as for g4x/ibx let's assume the behaviour was always the same. I also did a bit more archaeology and found the following: commit e3421a18 ("drm/i915: enable DP/eDP for Sandybridge/Cougarpoint") added the precharge==3 for snb commit 092945e1 ("drm/i915/dp: Use auxch precharge value of 5 everywhere") tried to change it to be 5 for snb commit 6b4e0a93 ("Revert "drm/i915/dp: Use auxch precharge value of 5 everywhere"") went back to 3 for snb due to a regression So I think the value of 5 was just always wrong, but I guess very few display actually get upset if we do too many SYNCs. Also DP 1.0 did not specify any max value for this, whereas DP 1.1+ added the max==32 wording. Additionally I hooked up a scope to a few machines with the following findings: - ibx and cpt both give us the expected 32 total sync pulses with precharge==3 - ctg is a bit different, it has the 10 hardcoded precharge sync pulses same as later platforms (so we get at least 26 sync pulses in total). However the additional precharge length (which is what we're changing here) is not done with sync pulses. Instead ctg does this part of the precharge with a steady DC voltage. If we wanted to 100% match DP 1.1+ here we should perhaps set prechange length to 0, but less precharge might make AUX less reliable, and so far we're not aware of any problems due to the DC precharge. Hence I think precharge==3 is probably the best choice here too to make the total length of precharge consistent with the later platforms. Signed-off-by:
-
Jani Nikula authored
The definitions are in the crtc and dpll files; move the declarations to the corresponding headers. Reviewed-by:
-
Jani Nikula authored
Add separate intel_dp_hdcp.h to go with intel_dp_hdcp.c, and rename the init function intel_dp_hdcp_init() to follow naming where function prefix matches the file name. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
- 27 Apr, 2021 1 commit
-
-
Gwan-gyeong Mun authored
TGL PSR2 hardware tracking shows momentary flicker and screen shift if TGL Display stepping is B1 from A0. It has been fixed from TGL Display stepping C0. HSDES: 18015970021 HSDES: 2209313811 BSpec: 55378 v2: Add checking of PSR2 manual tracking (Jose) Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
- 26 Apr, 2021 1 commit
-
-
José Roberto de Souza authored
DP_PSR_EN_CFG bit 5 aka "Selective Update Region Scan Line Capture Indication" in eDP spec has a ambiguous name, so renaming to better match specification. While at it, replacing bit shit by BIT() macro and adding the version some registers were added to eDP specification. Cc: <dri-devel@lists.freedesktop.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
-
