- 25 Jul, 2021 9 commits
-
-
Xin Long authored
This patch is to introduce last_rtx_chunks into sctp_transport to detect if there's any packet retransmission/loss happened by checking against asoc's rtx_data_chunks in sctp_transport_pl_send(). If there is, namely, transport->last_rtx_chunks != asoc->rtx_data_chunks, the pmtu probe will be sent out. Otherwise, increment the pl.raise_count and return when it's in Search Complete state. With this patch, if in Search Complete state, which is a long period, it doesn't need to keep probing the current pmtu unless there's data packet loss. This will save quite some traffic. v1->v2: - add the missing Fixes tag. Fixes: 0dac127c ("sctp: do black hole detection in search complete state") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch does 3 things: - make sctp_transport_pl_send() and sctp_transport_pl_recv() return bool type to decide if more probe is needed to send. - pr_debug() only when probe is really needed to send. - count pl.raise_count in sctp_transport_pl_send() instead of sctp_transport_pl_recv(), and it's only incremented for the 1st probe for the same size. These are preparations for the next patch to make probes happen only when there's packet loss in Search Complete state. Signed-off-by: -
Harshvardhan Jha authored
The list_for_each_entry() iterator, "vlan" in this code, can never be NULL so the warning will never be printed. Signed-off-by:
Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by:
-
Jiapeng Chong authored
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'. Eliminate the follow smatch warning: drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn: missing error code 'err'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Fixes: 7ae0e400 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs") Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Kevin Lo authored
Restore PHY_ID_BCM54811 accidently removed by commit 5d4358ed. Fixes: 5d4358ed ("net: phy: broadcom: Allow BCM54210E to configure APD") Signed-off-by:
Kevin Lo <kevlo@kevlo.org> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Parav Pandit authored
Merge commit cited in fixes tag was incorrect. Due to it phys_port_name of the virtual port resulted in incorrect name. Also the phys_port_name of the physical port was written twice due to the merge error. Fix it by removing the old code and inserting back the misplaced code. Related commits of interest in net and net-next branches that resulted in merge conflict are: in net-next branch: commit f285f37c ("devlink: append split port number to the port name") in net branch: commit b28d8f0c ("devlink: Correct VIRTUAL port to not have phys_port attributes") Fixes: 12628565 ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net") Signed-off-by:
Parav Pandit <parav@nvidia.com> Reported-by:
Niklas Schnelle <schnelle@linux.ibm.com> Tested-by:
-
Hariprasad Kelam authored
Avoid configure backpressure for LBK links as they don't support it and enable lmacs before configuration pause frames. Fixes: 75f36270 ("octeontx2-pf: Support to enable/disable pause frames via ethtool") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
-
Geetha sowjanya authored
In the existing code while changing the number of TX/RX queues using ethtool the PF/VF interface resources are freed and reallocated (otx2_stop and otx2_open is called) if the device is in running state. If any resource allocation fails in otx2_open, driver free already allocated resources and return. But again, when the number of queues changes as the device state still running oxt2_stop is called. In which we try to free already freed resources leading to driver crash. This patch fixes the issue by setting the INTF_DOWN flag on error and free the resources in otx2_stop only if the flag is not set. Fixes: 50fe6c02 ("octeontx2-pf: Register and handle link notifications") Signed-off-by:
Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com> Signed-off-by:
-
Geetha sowjanya authored
Currently PKINDs are not assigned to LBK channels. The default value of LBK_CHX_PKIND (channel to PKIND mapping) register is zero, which is resulting in a overlap of pkind between LBK and CGX LMACs. When KPU1 parser config is modified when PTP timestamping is enabled on the CGX LMAC interface it is impacting traffic on LBK interfaces as well. This patch fixes the issue by reserving the PKIND#0 for LBK devices. CGX mapped PF pkind starts from 1 and also fixes the max pkind available. Fixes: 42157217 ("octeontx2-af: Support to enable/disable HW timestamping") Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
-
- 24 Jul, 2021 9 commits
-
-
Michael Chan authored
We use the timecounter APIs for the 48-bit PHC and packet timestamps. We must periodically update the timecounter at roughly half the overflow interval. The overflow interval is about 78 hours, so update it every 19 hours (1/4 interval) for some extra margins. Fixes: 390862f4 ("bnxt_en: Get the full 48-bit hardware timestamp periodically") Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Xin Long authored
One skb's skb_shinfo frags are not writable, and they can be shared with other skbs' like by pskb_copy(). To write the frags may cause other skb's data crash. So before doing en/decryption, skb_cow_data() should always be called for a cloned or nonlinear skb if req dst is using the same sg as req src. While at it, the likely branch can be removed, as it will be covered by skb_cow_data(). Note that esp_input() has the same issue, and I will fix it in another patch. tipc_aead_encrypt() doesn't have this issue, as it only processes linear data in the unlikely branch. Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Reported-by:
Shuang Li <shuali@redhat.com> Signed-off-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.14-20210724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can linux-can-fixes-for-5.14-20210724 Marc Kleine-Budde says: ==================== pull-request: can 2021-07-24 this is a pull request of 6 patches for net/master. The first patch is by Joakim Zhang targets the imx8mp device tree. It removes the imx6 fallback from the flexcan binding, as the imx6 is not compatible with the imx8mp. Ziyang Xuan contributes a patch to fix a use-after-free in the CAN raw's raw_setsockopt(). The next two patches target the CAN J1939 protocol. The first one is by Oleksij Rempel and clarifies the lifetime of session object in j1939_session_deactivate(). Zhang Changzhong's patch fixes the timeout value between consecutive TP.DT. Stephane Grosjean contributes a patch for the peak_usb driver to fix reading of the rxerr/txerr values. The last patch is by me for the mcp251xfd driver. It stops the timestamp worker in case of a fatal error in the IRQ handler. ==================== Signed-off-by:
-
Marc Kleine-Budde authored
In case an error occurred in the IRQ handler, the chip status is dumped via devcoredump and all IRQs are disabled, but the chip stays powered for further analysis. The chip is in an undefined state and will not receive any CAN frames, so shut down the timestamping worker, which reads the TBC register regularly, too. This avoids any CRC read error messages if there is a communication problem with the chip. Fixes: efd8d98d ("can: mcp251xfd: add HW timestamp infrastructure") Link: https://lore.kernel.org/r/20210724155131.471303-1-mkl@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Stephane Grosjean authored
This patch fixes an incorrect way of reading error counters in messages received for this purpose from the PCAN-USB interface. These messages inform about the increase or decrease of the error counters, whose values are placed in bytes 1 and 2 of the message data (not 0 and 1). Fixes: ea8b33bd ("can: pcan_usb: add support of rxerr/txerr counters") Link: https://lore.kernel.org/r/20210625130931.27438-4-s.grosjean@peak-system.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
-
Zhang Changzhong authored
For receive side, the max time interval between two consecutive TP.DT should be 750ms. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/1625569210-47506-1-git-send-email-zhangchangzhong@huawei.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Oleksij Rempel authored
The j1939_session_deactivate() is decrementing the session ref-count and potentially can free() the session. This would cause use-after-free situation. However, the code calling j1939_session_deactivate() does always hold another reference to the session, so that it would not be free()ed in this code path. This patch adds a comment to make this clear and a WARN_ON, to ensure that future changes will not violate this requirement. Further this patch avoids dereferencing the session pointer as a precaution to avoid use-after-free if the session is actually free()ed. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/r/20210714111602.24021-1-o.rempel@pengutronix.deReported-by:
Xiaochen Zou <xzou017@ucr.edu> Signed-off-by:
-
Ziyang Xuan authored
We get a bug during ltp can_filter test as following. =========================================== [60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0 [60919.265443] Oops: 0000 [#1] SMP PTI [60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G W 4.19.90+ #1 [60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200 [60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246 [60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007 [60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30 [60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001 [60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30 [60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000 [60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000 [60919.361151] FS: 00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000 [60919.400812] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0 [60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [60919.451608] PKRU: 55555554 [60919.463622] Call Trace: [60919.475617] <IRQ> [60919.487122] ? update_load_avg+0x89/0x5d0 [60919.498478] ? update_load_avg+0x89/0x5d0 [60919.509822] ? account_entity_enqueue+0xc5/0xf0 [60919.520709] security_sock_rcv_skb+0x2a/0x40 [60919.531413] sk_filter_trim_cap+0x47/0x1b0 [60919.542178] ? kmem_cache_alloc+0x38/0x1b0 [60919.552444] sock_queue_rcv_skb+0x17/0x30 [60919.562477] raw_rcv+0x110/0x190 [can_raw] [60919.572539] can_rcv_filter+0xbc/0x1b0 [can] [60919.582173] can_receive+0x6b/0xb0 [can] [60919.591595] can_rcv+0x31/0x70 [can] [60919.600783] __netif_receive_skb_one_core+0x5a/0x80 [60919.609864] process_backlog+0x9b/0x150 [60919.618691] net_rx_action+0x156/0x400 [60919.627310] ? sched_clock_cpu+0xc/0xa0 [60919.635714] __do_softirq+0xe8/0x2e9 [60919.644161] do_softirq_own_stack+0x2a/0x40 [60919.652154] </IRQ> [60919.659899] do_softirq.part.17+0x4f/0x60 [60919.667475] __local_bh_enable_ip+0x60/0x70 [60919.675089] __dev_queue_xmit+0x539/0x920 [60919.682267] ? finish_wait+0x80/0x80 [60919.689218] ? finish_wait+0x80/0x80 [60919.695886] ? sock_alloc_send_pskb+0x211/0x230 [60919.702395] ? can_send+0xe5/0x1f0 [can] [60919.708882] can_send+0xe5/0x1f0 [can] [60919.715037] raw_sendmsg+0x16d/0x268 [can_raw] It's because raw_setsockopt() concurrently with unregister_netdevice_many(). Concurrent scenario as following. cpu0 cpu1 raw_bind raw_setsockopt unregister_netdevice_many unlist_netdevice dev_get_by_index raw_notifier raw_enable_filters ...... can_rx_register can_rcv_list_find(..., net->can.rx_alldev_list) ...... sock_close raw_release(sock_a) ...... can_receive can_rcv_filter(net->can.rx_alldev_list, ...) raw_rcv(skb, sock_a) BUG After unlist_netdevice(), dev_get_by_index() return NULL in raw_setsockopt(). Function raw_enable_filters() will add sock and can_filter to net->can.rx_alldev_list. Then the sock is closed. Followed by, we sock_sendmsg() to a new vcan device use the same can_filter. Protocol stack match the old receiver whose sock has been released on net->can.rx_alldev_list in can_rcv_filter(). Function raw_rcv() uses the freed sock. UAF BUG is triggered. We can find that the key issue is that net_device has not been protected in raw_setsockopt(). Use rtnl_lock to protect net_device in raw_setsockopt(). Fixes: c18ce101 ("[CAN]: Add raw protocol") Link: https://lore.kernel.org/r/20210722070819.1048263-1-william.xuanziyang@huawei.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Joakim Zhang authored
FlexCAN on i.MX8MP is not derived from i.MX6Q, instead reuses from i.MX8QM with extra ECC added and default is enabled, so that the FlexCAN would be put into freeze mode without FLEXCAN_QUIRK_DISABLE_MECR quirk. This patch removes "fsl,imx6q-flexcan" fallback compatible string since it's not compatible with the i.MX6Q. Link: https://lore.kernel.org/r/20210719073437.32078-1-qiangqing.zhang@nxp.comSigned-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
- 23 Jul, 2021 22 commits
-
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: bug fixes Fix a thread race in rx_mode, remove unnecessary log message, fix dynamic coalescing issues, and count all csum_none cases. ==================== Signed-off-by: -
Shannon Nelson authored
Be sure to count the csum_none cases when csum offload is enabled. Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
We need to count the correct Tx and/or Rx packets for dynamic interrupt moderation, depending on which we're processing on the queue interrupt. Fixes: 04a83459 ("ionic: dynamic interrupt moderation") Signed-off-by:
-
Shannon Nelson authored
Move the interrupt coalesce value update out of the napi thread and into the dim_work thread and set it only when it has actually changed. Fixes: 04a83459 ("ionic: dynamic interrupt moderation") Signed-off-by:
-
Shannon Nelson authored
If PTP configuration is attempted on ports that don't support it, such as VF ports, the driver will return an error status -95, or EOPNOSUPP and print an error message enp98s0: hwstamp set failed: -95 Because some daemons can retry every few seconds, this can end up filling the dmesg log and pushing out other more useful messages. We can catch this issue earlier in our handling and return the error without a log message. Fixes: 829600ce ("ionic: add ts_config replay") Signed-off-by: -
Shannon Nelson authored
Move the bulk of the code from ionic_set_rx_mode(), which can be called from atomic context, into ionic_lif_rx_mode() which is a safe context. A call from the stack will get pushed off into a work thread, but it is also possible to simultaneously have a call driven by a queue reconfig request from an ethtool command or fw recovery event. We add a mutex around the rx_mode work to be sure they don't collide. Fixes: 81dbc241 ("ionic: change set_rx_mode from_ndo to can_sleep") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-07-23 This series contains updates to i40e driver only. Arkadiusz corrects the order of calls for disabling queues to resolve a false error message and adds a better message to the user when transitioning FW LLDP back on while the firmware is still processing the off request. Lukasz adds additional information regarding possible incorrect cable use when a PHY type error occurs. Jedrzej adds ndo_select_queue support to resolve incorrect queue selection when SW DCB is used and adds a warning when there are not enough queues for desired TC configuration. ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'mac80211-for-net-2021-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Couple of fixes: * fix aggregation on mesh * fix late enabling of 4-addr mode * leave monitor SKBs with some headroom * limit band information for old applications * fix virt-wifi WARN_ON * fix memory leak in cfg80211 BSS list maintenance
-
Paul Jakma authored
Commit 7930742d, reverting 26fd962b, missed out on reverting an incorrect change to a return value. The niu_pci_vpd_scan_props(..) == 1 case appears to be a normal path - treating it as an error and return -EINVAL was breaking VPD_SCAN and causing the driver to fail to load. Fix, so my Neptune card works again. Cc: Kangjie Lu <kjlu@umn.edu> Cc: Shannon Nelson <shannon.lee.nelson@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Fixes: 7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"') Signed-off-by:
Paul Jakma <paul@jakma.org> Signed-off-by:
-
Pavel Skripkin authored
Syzbot reported memory leak in qrtr. The problem was in unputted struct sock. qrtr_local_enqueue() function calls qrtr_port_lookup() which takes sock reference if port was found. Then there is the following check: if (!ipc || &ipc->sk == skb->sk) { ... return -ENODEV; } Since we should drop the reference before returning from this function and ipc can be non-NULL inside this if, we should add qrtr_port_put() inside this if. The similar corner case is in qrtr_endpoint_post() as Manivannan reported. In case of sock_queue_rcv_skb() failure we need to put port reference to avoid leaking struct sock pointer. Fixes: e04df98a ("net: qrtr: Remove receive worker") Fixes: bdabad3e ("net: Add Qualcomm IPC router") Reported-and-tested-by: syzbot+35a511c72ea7356cdcf3@syzkaller.appspotmail.com Signed-off-by:Pavel Skripkin <paskripkin@gmail.com> Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayusosays: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Memleak in commit audit error path, from Dongliang Mu. 2) Avoid possible false sharing for flowtable timeout updates and nft_last use. 3) Adjust conntrack timestamp due to garbage collection delay, from Florian Westphal. 4) Fix nft_nat without layer 3 address for the inet family. 5) Fix compilation warning in nfnl_hook when ingress support is disabled, from Arnd Bergmann. ==================== Signed-off-by: -
Subbaraya Sundeep authored
Get the number of VFs of a PF correctly by calling rvu_get_pf_numvfs in rvu_switch_disable function. Also hwvf is not required hence remove it. Fixes: 23109f8d ("octeontx2-af: Introduce internal packet switching") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
Loic Poulain authored
A wwan link created via the wwan_create_default_link procedure is never notified to the user (RTM_NEWLINK), causing issues with user tools relying on such event to track network links (NetworkManager). This is because the procedure misses a call to rtnl_configure_link(), which sets the link as initialized and notifies the new link (cf proper usage in __rtnl_newlink()). Cc: stable@vger.kernel.org Fixes: ca374290 ("wwan: core: support default netdev creation") Suggested-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Acked-by:
-
Vladimir Oltean authored
The blamed commit modified the driver to accept the addition of VID 0 without doing anything, but deleting that VID still fails: [ 32.080780] mv88e6085 d0032004.mdio-mii:10 lan8: failed to kill vid 0081/0 Modify mv88e6xxx_port_vlan_leave() to do the same thing as the addition. Fixes: b8b79c41 ("net: dsa: mv88e6xxx: Fix adding vlan 0") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Kangmin Park authored
Decrease hop limit counter when deliver skb to ndp proxy. Signed-off-by:
Kangmin Park <l4stpr0gr4m@gmail.com> Signed-off-by:
-
Gilad Naaman authored
In cases where the header straight after the tunnel header was another ethernet header (TEB), instead of the network header, the ECN decapsulation code would treat the ethernet header as if it was an IP header, resulting in mishandling and possible wrong drops or corruption of the IP header. In this case, ECT(1) is sent, so IP_ECN_decapsulate tries to copy it to the inner IPv4 header, and correct its checksum. The offset of the ECT bits in an IPv4 header corresponds to the lower 2 bits of the second octet of the destination MAC address in the ethernet header. The IPv4 checksum corresponds to end of the source address. In order to reproduce: $ ip netns add A $ ip netns add B $ ip -n A link add _v0 type veth peer name _v1 netns B $ ip -n A link set _v0 up $ ip -n A addr add dev _v0 10.254.3.1/24 $ ip -n A route add default dev _v0 scope global $ ip -n B link set _v1 up $ ip -n B addr add dev _v1 10.254.1.6/24 $ ip -n B route add default dev _v1 scope global $ ip -n B link add gre1 type gretap local 10.254.1.6 remote 10.254.3.1 key 0x49000000 $ ip -n B link set gre1 up # Now send an IPv4/GRE/Eth/IPv4 frame where the outer header has ECT(1), # and the inner header has no ECT bits set: $ cat send_pkt.py #!/usr/bin/env python3 from scapy.all import * pkt = IP(b'E\x01\x00\xa7\x00\x00\x00\x00@/`%\n\xfe\x03\x01\n\xfe\x01\x06 \x00eXI\x00' b'\x00\x00\x18\xbe\x92\xa0\xee&\x18\xb0\x92\xa0l&\x08\x00E\x00\x00}\x8b\x85' b'@\x00\x01\x01\xe4\xf2\x82\x82\x82\x01\x82\x82\x82\x02\x08\x00d\x11\xa6\xeb' b'3\x1e\x1e\\xf3\\xf7`\x00\x00\x00\x00ZN\x00\x00\x00\x00\x00\x00\x10\x11\x12' b'\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&\'()*+,-./01234' b'56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ') send(pkt) $ sudo ip netns exec B tcpdump -neqlllvi gre1 icmp & ; sleep 1 $ sudo ip netns exec A python3 send_pkt.py In the original packet, the source/destinatio MAC addresses are dst=18:be:92:a0:ee:26 src=18:b0:92:a0:6c:26 In the received packet, they are dst=18:bd:92:a0:ee:26 src=18:b0:92:a0:6c:27 Thanks to Lahav Schlesinger <lschlesinger@drivenets.com> and Isaac Garzon <isaac@speed.io> for helping me pinpoint the origin. Fixes: b7237487 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Cc: David S. Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:Gilad Naaman <gnaaman@drivenets.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Hoang Le authored
The release_sock() is blocking function, it would change the state after sleeping. In order to evaluate the stated condition outside the socket lock context, switch to use wait_woken() instead. Fixes: 6398e23c ("tipc: standardize accept routine") Acked-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
Xin Long authored
For implicit-connect, when it's either SYN- or SYN+, an ACK should be sent back to the client immediately. It's not appropriate for the client to enter established state only after receiving data from the server. On client side, after the SYN is sent out, tipc_wait_for_connect() should be called to wait for the ACK if timeout is set. This patch also restricts __tipc_sendstream() to call __sendmsg() only when it's in TIPC_OPEN state, so that the client can program in a single loop doing both connecting and data sending like: for (...) sendmsg(dest, buf); This makes the implicit-connect more implicit. Fixes: b97bf3fd ("[TIPC] Initial merge") Signed-off-by: -
Sunil Goutham authored
Remove devm_kfree of memory where VLAN entry to RVU PF mapping info is saved. This will be freed anyway at driver exit. Having this could result in warning from devm_kfree() if the memory is not allocated due to errors in rvu_nix_block_init() before nix_setup_txvlan(). Fixes: 9a946def ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries") Signed-off-by:
-
Jedrzej Jagielski authored
Fix missing failed message if driver does not have enough queues to complete TC command. Without this fix no message is displayed in dmesg. Fixes: a9ce82f7 ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by:
Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by:
Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by:
Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jedrzej Jagielski authored
In SW DCB mode the packets sent receive incorrect UP tags. They are constructed correctly and put into tx_ring, but UP is later remapped by HW on the basis of TCTUPR register contents according to Tx queue selected, and BW used is consistent with the new UP values. This is caused by Tx queue selection in kernel not taking into account DCB configuration. This patch fixes the issue by implementing the ndo_select_queue NDO callback. Fixes: fd0a05ce ("i40e: transmit, receive, and NAPI") Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by:
-
Lukasz Cieplicki authored
In case of PHY type error occurs, the message was too generic. Add additional info to PHY type error indicating that it can be wrong cable connected. Fixes: 124ed15b ("i40e: Add dual speed module support") Signed-off-by:
Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by:
Michal Maloszewski <michal.maloszewski@intel.com> Tested-by:
Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by:
-
