- 02 Oct, 2022 23 commits
-
-
Chanho Park authored
Adds "samsung,exynosautov9-wdt" to samsung-wdt compatible. This has two cpu watchdogs like exynos850. Signed-off-by:
Chanho Park <chanho61.park@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220520121750.71473-2-chanho61.park@samsung.comSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Jonathan Neuschäfer authored
On the Nuvoton WPCM450 SoC, with its upcoming clock driver, peripheral clocks are individually gated and ungated. Therefore, the watchdog driver must be able to ungate the watchdog clock. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by:
-
Philippe Boos authored
If the watchdog is already running (e.g.: started by bootloader) then the kernel driver should keep the watchdog active but the amlogic driver turns it off. Let the driver fix the clock rate if already active because we do not know the previous timebase value. To avoid unintentional resetting we temporarily set it to its maximum value. Then keep the enable bit if is was previously active. Signed-off-by:
Philippe Boos <pboos@baylibre.com> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
-
Sergiu Moga authored
Convert at91sam9 WDT binding for Atmel/Microchip SoCs to json-schema format. Signed-off-by:
Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by:
-
Pali Rohár authored
ioctl(WDIOC_SETTIMEOUT) calls .set_timeout and .ping callbacks and it is expected that it changes current watchdog timeout. armada_37xx_wdt's .ping callback just reping counter 0 and does not touch counter 1 used for timeout. So it is needed to set counter 1 to the new value in .set_timeout callback to ensure ioctl(WDIOC_SETTIMEOUT) functionality. Fix it. Fixes: 54e3d9b5 ("watchdog: Add support for Armada 37xx CPU watchdog") Signed-off-by:
Pali Rohár <pali@kernel.org> Reviewed-by:
Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20220726085612.10672-1-pali@kernel.orgSigned-off-by:
-
sunliming authored
This symbol is not used outside of sa1100_wdt.c, so marks it static. Fixes the following warning: >> drivers/watchdog/sa1100_wdt.c:241:24: sparse: sparse: symbol 'sa1100dog_driver' was not declared. Should it be static? Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
sunliming <sunliming@kylinos.cn> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Jason Wang authored
The double `we' is duplicated in the comment, remove one. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Reviewed-by:
-
shaomin Deng authored
There is a rebundant word "we" in comments, so remove it. Signed-off-by:
shaomin Deng <dengshaomin@cdjrlc.com> Reviewed-by:
-
Bo Liu authored
It's possible that dev_set_name() returns -ENOMEM, catch and handle this. Signed-off-by:
Bo Liu <liubo03@inspur.com> Reviewed-by:
-
Phil Edworthy authored
The WDT on RZ/V2M devices is basically the same as RZ/G2L, but without the parity error registers. This means the driver has to reset the hardware plus set the minimum timeout in order to do a restart and has a single interrupt. Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Phil Edworthy authored
Add the documentation for the r9a09g011 SoC, but in doing so also reorganise the doc to make it easier to read. Additionally, make the binding require an interrupt to be specified. Whilst the driver does not need an interrupt, all of the SoCs that use this binding actually provide one. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Dan Carpenter authored
This code assumes that platform_get_irq() function returns zero on failure. In fact, platform_get_irq() never returns zero. It returns negative error codes or positive non-zero values on success. Fixes: eca10ae6 ("watchdog: add driver for Cortina Gemini watchdog") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Thanh Quan authored
Document support for the Watchdog Timer (WDT) Controller in the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by:
Thanh Quan <thanh.quan.xn@renesas.com> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
-
David Müller authored
Simple driver for the watchdog present in some Exar/MaxLinear UART chips. Please see https://www.maxlinear.com/product/interface/uarts/lpc-uarts/xr28v384 for more info. Signed-off-by:
David Müller <d.mueller@elsoft.ch> Reviewed-by:
-
Sergei Antonov authored
Implement ftwdt010_wdt_restart(). It enables watchdog with timeout = 0 and disabled IRQ. Since it needs code similar to ftwdt010_wdt_start(), add a new function ftwdt010_enable() and move common code there. Suggested-by:
Sergei Antonov <saproj@gmail.com> Reviewed-by:
-
Henning Schild authored
The status bit in the status and control register can tell us whether the last reboot was caused by the watchdog. Make sure to take that into the bootstatus before clearing it. Signed-off-by:
Henning Schild <henning.schild@siemens.com> Reviewed-by:
-
Srinivas Neeli authored
Convert Xilinx watchdog bindings to DT schema format using json-schema Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by:
Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by:
-
Chin-Ting Kuo authored
If the output driving type is push-pull mode, the output polarity should be selected in advance. Otherwise, an unexpected value will be output at the moment of changing to push-pull mode. Thus, output polarity, WDT18[31], must be configured before changing driving type, WDT18[30]. Signed-off-by:
Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Reviewed-by:
Bonnie Lo <Bonnie_Lo@wiwynn.com> Reviewed-by:
Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220819094905.1962513-1-chin-ting_kuo@aspeedtech.comSigned-off-by:
-
Jerry Hoemann authored
Enable HP_WATCHDOG for ARM64 systems. HPWDT_NMI_DECODING requires X86 as NMI handlers are X86 specific. Signed-off-by:
Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by:
-
Jerry Hoemann authored
Fixes: d48b0e17 ("x86, nmi, drivers: Fix nmi splitup build bug") Arm64 does not support NMI and has no <asm/nmi.h>. Include <asm/nmi.h> only if CONFIG_HPWDT_NMI_DECODING is defined to avoid build failure on non-existent header file on Arm64. Signed-off-by:
-
Jean Delvare authored
The wdat_wdt driver is misusing the min_hw_heartbeat_ms field. This field should only be used when the hardware watchdog device should not be pinged more frequently than a specific period. The ACPI WDAT "Minimum Count" field, on the other hand, specifies the minimum timeout value that can be set. This corresponds to the min_timeout field in Linux's watchdog infrastructure. Setting min_hw_heartbeat_ms instead can cause pings to the hardware to be delayed when there is no reason for that, eventually leading to unexpected firing of the watchdog timer (and thus unexpected reboot). Since commit 6d72c7ac ("watchdog: wdat_wdt: Using the existing function to check parameter timeout"), min_timeout is being set too, but to the arbitrary value of 1 second, which doesn't make sense and allows setting timeout values lower that the ACPI WDAT "Minimum Count" field. I'm also changing max_hw_heartbeat_ms to max_timeout for symmetry, although the use of this one isn't fundamentally wrong, but there is also no reason to enable the software-driven ping mechanism for the wdat_wdt driver. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: 058dfc76 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Fixes: 6d72c7ac ("watchdog: wdat_wdt: Using the existing function to check parameter timeout") Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
-
Dmitry Torokhov authored
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node() so that gpiolib can be cleaned a bit, so let's switch to the generic fwnode property API. While at it, switch the rest of the calls to read properties in bd9576_wdt_probe() to the generic device property API as well. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-10-b29adfb27a6c@gmail.comSigned-off-by:
-
Nobuhiro Iwamatsu authored
The clock for this driver switched to the common clock controller driver. Therefore, update common clock properties for watchdog in the binding document. And this matched this example with the actual dts. Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Acked-by:
-
- 28 Aug, 2022 17 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull more hotfixes from Andrew Morton: "Seventeen hotfixes. Mostly memory management things. Ten patches are cc:stable, addressing pre-6.0 issues" * tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: .mailmap: update Luca Ceresoli's e-mail address mm/mprotect: only reference swap pfn page if type match squashfs: don't call kmalloc in decompressors mm/damon/dbgfs: avoid duplicate context directory creation mailmap: update email address for Colin King asm-generic: sections: refactor memory_intersects bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown Revert "memcg: cleanup racy sum avoidance code" mm/zsmalloc: do not attempt to free IS_ERR handle binder_alloc: add missing mmap_lock calls when using the VMA mm: re-allow pinning of zero pfns (again) vmcoreinfo: add kallsyms_num_syms symbol mailmap: update Guilherme G. Piccoli's email addresses writeback: avoid use-after-free after removing device shmem: update folio if shmem_replace_page() updates the page mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
-
Linus Torvalds authored
Pull bitmap fixes from Yury Norov: "Fix the reported issues, and implements the suggested improvements, for the version of the cpumask tests [1] that was merged with commit c41e8866 ("lib/test: introduce cpumask KUnit test suite"). These changes include fixes for the tests, and better alignment with the KUnit style guidelines" * tag 'bitmap-6.0-rc3' of github.com:/norov/linux: lib/cpumask_kunit: add tests file to MAINTAINERS lib/cpumask_kunit: log mask contents lib/test_cpumask: follow KUnit style guidelines lib/test_cpumask: fix cpu_possible_mask last test lib/test_cpumask: drop cpu_possible_mask full test
-
Luca Ceresoli authored
My Bootlin address is preferred from now on. Link: https://lkml.kernel.org/r/20220826130515.3011951-1-luca.ceresoli@bootlin.comSigned-off-by:
Luca Ceresoli <luca.ceresoli@bootlin.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Atish Patra <atishp@atishpatra.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Peter Xu authored
Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]: kernel BUG at include/linux/swapops.h:117! CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S O L 6.0.0-dbg-DEV #2 RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0 Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6 c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b 48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48 RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282 RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000 RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000 R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738 R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a FS: 00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> change_pte_range+0x36e/0x880 change_p4d_range+0x2e8/0x670 change_protection_range+0x14e/0x2c0 mprotect_fixup+0x1ee/0x330 do_mprotect_pkey+0x34c/0x440 __x64_sys_mprotect+0x1d/0x30 It triggers because pfn_swap_entry_to_page() could be called upon e.g. a genuine swap entry. Fix it by only calling it when it's a write migration entry where the page* is used. [1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220823221138.45602-1-peterx@redhat.com Fixes: 6c287605 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by:
Peter Xu <peterx@redhat.com> Reported-by:
Yu Zhao <yuzhao@google.com> Tested-by:
David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Phillip Lougher authored
The decompressors may be called while in an atomic section. So move the kmalloc() out of this path, and into the "page actor" init function. This fixes a regression introduced by commit f268eedd ("squashfs: extend "page actor" to handle missing pages") Link: https://lkml.kernel.org/r/20220822215430.15933-1-phillip@squashfs.org.uk Fixes: f268eedd ("squashfs: extend "page actor" to handle missing pages") Reported-by:
Chris Murphy <lists@colorremedies.com> Signed-off-by:
Phillip Lougher <phillip@squashfs.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Badari Pulavarty authored
When user tries to create a DAMON context via the DAMON debugfs interface with a name of an already existing context, the context directory creation fails but a new context is created and added in the internal data structure, due to absence of the directory creation success check. As a result, memory could leak and DAMON cannot be turned on. An example test case is as below: # cd /sys/kernel/debug/damon/ # echo "off" > monitor_on # echo paddr > target_ids # echo "abc" > mk_context # echo "abc" > mk_context # echo $$ > abc/target_ids # echo "on" > monitor_on <<< fails Return value of 'debugfs_create_dir()' is expected to be ignored in general, but this is an exceptional case as DAMON feature is depending on the debugfs functionality and it has the potential duplicate name issue. This commit therefore fixes the issue by checking the directory creation failure and immediately return the error in the case. Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org Fixes: 75c1c2b5 ("mm/damon/dbgfs: support multiple contexts") Signed-off-by:Badari Pulavarty <badari.pulavarty@intel.com> Signed-off-by:
SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [ 5.15.x] Signed-off-by:
-
Colin Ian King authored
Colin King is working on kernel janitorial fixes in his spare time and using his Intel email is confusing. Use his gmail account as the default email address. Link: https://lkml.kernel.org/r/20220817212753.101109-1-colin.i.king@gmail.comSigned-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Quanyang Wang authored
There are two problems with the current code of memory_intersects: First, it doesn't check whether the region (begin, end) falls inside the region (virt, vend), that is (virt < begin && vend > end). The second problem is if vend is equal to begin, it will return true but this is wrong since vend (virt + size) is not the last address of the memory region but (virt + size -1) is. The wrong determination will trigger the misreporting when the function check_for_illegal_area calls memory_intersects to check if the dma region intersects with stext region. The misreporting is as below (stext is at 0x80100000): WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536] Modules linked in: CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5 Hardware name: Xilinx Zynq Platform unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xb0/0x198 __warn from warn_slowpath_fmt+0x80/0xb4 warn_slowpath_fmt from check_for_illegal_area+0x130/0x168 check_for_illegal_area from debug_dma_map_sg+0x94/0x368 debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128 __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24 dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4 usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214 usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118 usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70 usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360 usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440 usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238 usb_stor_control_thread from kthread+0xf8/0x104 kthread from ret_from_fork+0x14/0x2c Refactor memory_intersects to fix the two problems above. Before the 1d7db834 ("dma-debug: use memory_intersects() directly"), memory_intersects is called only by printk_late_init: printk_late_init -> init_section_intersects ->memory_intersects. There were few places where memory_intersects was called. When commit 1d7db834 ("dma-debug: use memory_intersects() directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA subsystem uses it to check for an illegal area and the calltrace above is triggered. [akpm@linux-foundation.org: fix nearby comment typo] Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com Fixes: 97955936 ("asm/sections: add helpers to check for section data") Signed-off-by:
Quanyang Wang <quanyang.wang@windriver.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <treding@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Liu Shixin authored
The vmemmap pages is marked by kmemleak when allocated from memblock. Remove it from kmemleak when freeing the page. Otherwise, when we reuse the page, kmemleak may report such an error and then stop working. kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing) kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff98fb6be00000 (size 335544320): kmemleak: comm "swapper", pid 0, jiffies 4294892296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: Link: https://lkml.kernel.org/r/20220819094005.2928241-1-liushixin2@huawei.com Fixes: f41f2ed4 (mm: hugetlb: free the vmemmap pages associated with each HugeTLB page) Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Heming Zhao authored
After commit 0737e01d ("ocfs2: ocfs2_mount_volume does cleanup job before return error"), any procedure after ocfs2_dlm_init() fails will trigger crash when calling ocfs2_dlm_shutdown(). ie: On local mount mode, no dlm resource is initialized. If ocfs2_mount_volume() fails in ocfs2_find_slot(), error handling will call ocfs2_dlm_shutdown(), then does dlm resource cleanup job, which will trigger kernel crash. This solution should bypass uninitialized resources in ocfs2_dlm_shutdown(). Link: https://lkml.kernel.org/r/20220815085754.20417-1-heming.zhao@suse.com Fixes: 0737e01d ("ocfs2: ocfs2_mount_volume does cleanup job before return error") Signed-off-by:
Heming Zhao <heming.zhao@suse.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Shakeel Butt authored
This reverts commit 96e51ccf. Recently we started running the kernel with rstat infrastructure on production traffic and begin to see negative memcg stats values. Particularly the 'sock' stat is the one which we observed having negative value. $ grep "sock " /mnt/memory/job/memory.stat sock 253952 total_sock 18446744073708724224 Re-run after couple of seconds $ grep "sock " /mnt/memory/job/memory.stat sock 253952 total_sock 53248 For now we are only seeing this issue on large machines (256 CPUs) and only with 'sock' stat. I think the networking stack increase the stat on one cpu and decrease it on another cpu much more often. So, this negative sock is due to rstat flusher flushing the stats on the CPU that has seen the decrement of sock but missed the CPU that has increments. A typical race condition. For easy stable backport, revert is the most simple solution. For long term solution, I am thinking of two directions. First is just reduce the race window by optimizing the rstat flusher. Second is if the reader sees a negative stat value, force flush and restart the stat collection. Basically retry but limited. Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com Fixes: 96e51ccf ("memcg: cleanup racy sum avoidance code") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Cc: "Michal Koutný" <mkoutny@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: David Hildenbrand <david@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> [5.15] Signed-off-by:
-
Sergey Senozhatsky authored
zsmalloc() now returns ERR_PTR values as handles, which zram accidentally can pass to zs_free(). Another bad scenario is when zcomp_compress() fails - handle has default -ENOMEM value, and zs_free() will try to free that "pointer value". Add the missing check and make sure that zs_free() bails out when ERR_PTR() is passed to it. Link: https://lkml.kernel.org/r/20220816050906.2583956-1-senozhatsky@chromium.org Fixes: c7e6f17b ("zsmalloc: zs_malloc: return ERR_PTR on failure") Signed-off-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org>, Signed-off-by:
-
Liam Howlett authored
Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages() and when checking for a VMA in binder_alloc_new_buf_locked(). It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock after it verifies a VMA exists, but may be taken again deeper in the call stack, if necessary. Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com Fixes: a43cfc87 (android: binder: stop saving a pointer to the VMA) Signed-off-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by:
Ondrej Mosnacek <omosnace@redhat.com> Reported-by: <syzbot+a7b60a176ec13cafb793@syzkaller.appspotmail.com> Acked-by:
Carlos Llamas <cmllamas@google.com> Tested-by:
-
Alex Williamson authored
The below referenced commit makes the same error as 1c563432 ("mm: fix is_pinnable_page against a cma page"), re-interpreting the logic to exclude pinning of the zero page, which breaks device assignment with vfio. To avoid further subtle mistakes, split the logic into discrete tests. [akpm@linux-foundation.org: simplify comment, per John] Link: https://lkml.kernel.org/r/166015037385.760108.16881097713975517242.stgit@omen Link: https://lore.kernel.org/all/165490039431.944052.12458624139225785964.stgit@omen Fixes: f25cbb7a ("mm: add zone device coherent type memory support") Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Suggested-by:
Matthew Wilcox <willy@infradead.org> Suggested-by:
Felix Kuehling <felix.kuehling@amd.com> Tested-by:
Slawomir Laba <slawomirx.laba@intel.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Alistair Popple <apopple@nvidia.com> Signed-off-by:
-
Stephen Brennan authored
The rest of the kallsyms symbols are useless without knowing the number of symbols in the table. In an earlier patch, I somehow dropped the kallsyms_num_syms symbol, so add it back in. Link: https://lkml.kernel.org/r/20220808205410.18590-1-stephen.s.brennan@oracle.com Fixes: 5fd8fea9 ("vmcoreinfo: include kallsyms symbols") Signed-off-by:
Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Guilherme G. Piccoli authored
Both @canonical and @ibm email addresses are invalid now; use my personal address instead. Link: https://lkml.kernel.org/r/20220804202207.439427-1-gpiccoli@igalia.comSigned-off-by:
Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by:
-
