ARM64 does not support struct argument for trampoline based
bpf programs yet.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152702.2079066-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Now instead of the number of arguments, the number of registers
holding argument values are stored in trampoline. Update
the description of bpf_get_func_arg[_cnt]() helpers. Previous
programs without struct arguments should continue to work
as usual.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152657.2078805-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

In C, struct value can be passed as a function argument.
For small structs, struct value may be passed in
one or more registers. For trampoline based bpf programs,
this would cause complication since one-to-one mapping between
function argument and arch argument register is not valid
any more.

The latest llvm16 added bpf support to pass by values
for struct up to 16 bytes ([1]). This is also true for
x86_64 architecture where two registers will hold
the struct value if the struct size is >8 and <= 16.
This may not be true if one of struct member is 'double'
type but in current linux source code we don't have
such instance yet, so we assume all >8 && <= 16 struct
holds two general purpose argument registers.

Also change on-stack nr_args value to the number
of registers holding the arguments. This will
permit bpf_get_func_arg() helper to get all
argument values.

 [1] https://reviews.llvm.org/D132144Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152652.2078600-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Allow struct argument in trampoline based programs where
the struct size should be <= 16 bytes. In such cases, the argument
will be put into up to 2 registers for bpf, x86_64 and arm64
architectures.

To support arch-specific trampoline manipulation,
add arg_flags for additional struct information about arguments
in btf_func_model. Such information will be used in arch specific
function arch_prepare_bpf_trampoline() to prepare argument access
properly in trampoline.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152646.2078089-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

__ksize() was made private. Use ksize() instead.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-09-05

The following pull-request contains BPF updates for your *net-next* tree.

We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).

There are two small merge conflicts, resolve them as follows:

1) tools/testing/selftests/bpf/DENYLIST.s390x

  Commit 27e23836 ("selftests/bpf: Add lru_bug to s390x deny list") in
  bpf tree was needed to get BPF CI green on s390x, but it conflicted with
  newly added tests on bpf-next. Resolve by adding both hunks, result:

  [...]
  lru_bug                                  # prog 'printk': failed to auto-attach: -524
  setget_sockopt                           # attach unexpected error: -524                                               (trampoline)
  cb_refs                                  # expected error message unexpected error: -524                               (trampoline)
  cgroup_hierarchical_stats                # JIT does not support calling kernel function                                (kfunc)
  htab_update                              # failed to attach: ERROR: strerror_r(-524)=22                                (trampoline)
  [...]

2) net/core/filter.c

  Commit 1227c177 ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
  from net tree conflicts with commit 29003875 ("bpf: Change bpf_setsockopt(SOL_SOCKET)
  to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
  bpf-next tree, result:

  [...]
	if (getopt) {
		if (optname == SO_BINDTODEVICE)
			return -EINVAL;
		return sk_getsockopt(sk, SOL_SOCKET, optname,
				     KERNEL_SOCKPTR(optval),
				     KERNEL_SOCKPTR(optlen));
	}

	return sk_setsockopt(sk, SOL_SOCKET, optname,
			     KERNEL_SOCKPTR(optval), *optlen);
  [...]

The main changes are:

1) Add any-context BPF specific memory allocator which is useful in particular for BPF
   tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.

2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
   to reuse the existing core socket code as much as possible, from Martin KaFai Lau.

3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
   with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.

4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.

5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
   integration with the rstat framework, from Yosry Ahmed.

6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.

7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.

8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
   backend, from James Hilliard.

9) Fix verifier helper permissions and reference state management for synchronous
   callbacks, from Kumar Kartikeya Dwivedi.

10) Add support for BPF selftest's xskxceiver to also be used against real devices that
    support MAC loopback, from Maciej Fijalkowski.

11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.

12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.

13) Various minor misc improvements all over the place.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
  bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
  bpf: Remove usage of kmem_cache from bpf_mem_cache.
  bpf: Remove prealloc-only restriction for sleepable bpf programs.
  bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
  bpf: Remove tracing program restriction on map types
  bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
  bpf: Add percpu allocation support to bpf_mem_alloc.
  bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
  bpf: Adjust low/high watermarks in bpf_mem_cache
  bpf: Optimize call_rcu in non-preallocated hash map.
  bpf: Optimize element count in non-preallocated hash map.
  bpf: Relax the requirement to use preallocated hash maps in tracing progs.
  samples/bpf: Reduce syscall overhead in map_perf_test.
  selftests/bpf: Improve test coverage of test_maps
  bpf: Convert hash map to bpf_mem_alloc.
  bpf: Introduce any context BPF specific memory allocator.
  selftest/bpf: Add test for bpf_getsockopt()
  bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
  bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
  bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
  ...
====================

Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sparse checker found two endianness-related issues:

.../moxart_ether.c:34:15: warning: incorrect type in assignment (different base types)
.../moxart_ether.c:34:15:    expected unsigned int [usertype]
.../moxart_ether.c:34:15:    got restricted __le32 [usertype]

.../moxart_ether.c:39:16: warning: cast to restricted __le32

Fix them by using __le32 type instead of u32.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20220902125037.1480268-1-saproj@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sparse found a number of endianness-related issues of these kinds:

.../ftmac100.c:192:32: warning: restricted __le32 degrades to integer

.../ftmac100.c:208:23: warning: incorrect type in assignment (different base types)
.../ftmac100.c:208:23:    expected unsigned int rxdes0
.../ftmac100.c:208:23:    got restricted __le32 [usertype]

.../ftmac100.c:249:23: warning: invalid assignment: &=
.../ftmac100.c:249:23:    left side has type unsigned int
.../ftmac100.c:249:23:    right side has type restricted __le32

.../ftmac100.c:527:16: warning: cast to restricted __le32

Change type of some fields from 'unsigned int' to '__le32' to fix it.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220902113749.1408562-1-saproj@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Extend lan966x with RGMII support. The MAC supports all RGMII_* modes.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220902111548.614525-1-horatiu.vultur@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

We're not in a hot path and don't want to miss this message,
therefore remove the net_ratelimit() check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(),
switch from __nlmsg_put to nlmsg_put(), and explain the bounds check
for dealing with the memcpy() across a composite flexible array struct.
Avoids this future run-time warning:

  memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16)

Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: syzbot <syzkaller@googlegroups.com>
Cc: netfilter-devel@vger.kernel.org
Cc: coreteam@netfilter.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220901071336.1418572-1-keescook@chromium.orgSigned-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
Introduce any context BPF specific memory allocator.

Tracing BPF programs can attach to kprobe and fentry. Hence they run in
unknown context where calling plain kmalloc() might not be safe. Front-end
kmalloc() with per-cpu cache of free elements. Refill this cache asynchronously
from irq_work.

Major achievements enabled by bpf_mem_alloc:
- Dynamically allocated hash maps used to be 10 times slower than fully
  preallocated. With bpf_mem_alloc and subsequent optimizations the speed
  of dynamic maps is equal to full prealloc.
- Tracing bpf programs can use dynamically allocated hash maps. Potentially
  saving lots of memory. Typical hash map is sparsely populated.
- Sleepable bpf programs can used dynamically allocated hash maps.

Future work:
- Expose bpf_mem_alloc as uapi FD to be used in dynptr_alloc, kptr_alloc
- Convert lru map to bpf_mem_alloc
- Further cleanup htab code. Example: htab_use_raw_lock can be removed.

Changelog:

v5->v6:
- Debugged the reason for selftests/bpf/test_maps ooming in a small VM that BPF CI is using.
  Added patch 16 that optimizes the usage of rcu_barrier-s between bpf_mem_alloc and
  hash map. It drastically improved the speed of htab destruction.

v4->v5:
- Fixed missing migrate_disable in hash tab free path (Daniel)
- Replaced impossible "memory leak" with WARN_ON_ONCE (Martin)
- Dropped sysctl kernel.bpf_force_dyn_alloc patch (Daniel)
- Added Andrii's ack
- Added new patch 15 that removes kmem_cache usage from bpf_mem_alloc.
  It saves memory, speeds up map create/destroy operations
  while maintains hash map update/delete performance.

v3->v4:
- fix build issue due to missing local.h on 32-bit arch
- add Kumar's ack
- proposal for next steps from Delyan:
https://lore.kernel.org/bpf/d3f76b27f4e55ec9e400ae8dcaecbb702a4932e8.camel@fb.com/

v2->v3:
- Rewrote the free_list algorithm based on discussions with Kumar. Patch 1.
- Allowed sleepable bpf progs use dynamically allocated maps. Patches 13 and 14.
- Added sysctl to force bpf_mem_alloc in hash map even if pre-alloc is
  requested to reduce memory consumption. Patch 15.
- Fix: zero-fill percpu allocation
- Single rcu_barrier at the end instead of each cpu during bpf_mem_alloc destruction

v2 thread:
https://lore.kernel.org/bpf/20220817210419.95560-1-alexei.starovoitov@gmail.com/

v1->v2:
- Moved unsafe direct call_rcu() from hash map into safe place inside bpf_mem_alloc. Patches 7 and 9.
- Optimized atomic_inc/dec in hash map with percpu_counter. Patch 6.
- Tuned watermarks per allocation size. Patch 8
- Adopted this approach to per-cpu allocation. Patch 10.
- Fully converted hash map to bpf_mem_alloc. Patch 11.
- Removed tracing prog restriction on map types. Combination of all patches and final patch 12.

v1 thread:
https://lore.kernel.org/bpf/20220623003230.37497-1-alexei.starovoitov@gmail.com/

LWN article:
https://lwn.net/Articles/899274/
====================

Link: https://lore.kernel.org/r/Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

User space might be creating and destroying a lot of hash maps. Synchronous
rcu_barrier-s in a destruction path of hash map delay freeing of hash buckets
and other map memory and may cause artificial OOM situation under stress.
Optimize rcu_barrier usage between bpf hash map and bpf_mem_alloc:
- remove rcu_barrier from hash map, since htab doesn't use call_rcu
  directly and there are no callback to wait for.
- bpf_mem_alloc has call_rcu_in_progress flag that indicates pending callbacks.
  Use it to avoid barriers in fast path.
- When barriers are needed copy bpf_mem_alloc into temp structure
  and wait for rcu barrier-s in the worker to let the rest of
  hash map freeing to proceed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220902211058.60789-17-alexei.starovoitov@gmail.com

For bpf_mem_cache based hash maps the following stress test:
for (i = 1; i <= 512; i <<= 1)
  for (j = 1; j <= 1 << 18; j <<= 1)
    fd = bpf_map_create(BPF_MAP_TYPE_HASH, NULL, i, j, 2, 0);
creates many kmem_cache-s that are not mergeable in debug kernels
and consume unnecessary amount of memory.
Turned out bpf_mem_cache's free_list logic does batching well,
so usage of kmem_cache for fixes size allocations doesn't bring
any performance benefits vs normal kmalloc.
Hence get rid of kmem_cache in bpf_mem_cache.
That saves memory, speeds up map create/destroy operations,
while maintains hash map update/delete performance.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220902211058.60789-16-alexei.starovoitov@gmail.com

Since hash map is now converted to bpf_mem_alloc and it's waiting for rcu and
rcu_tasks_trace GPs before freeing elements into global memory slabs it's safe
to use dynamically allocated hash maps in sleepable bpf programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-15-alexei.starovoitov@gmail.com

Use call_rcu_tasks_trace() to wait for sleepable progs to finish.
Then use call_rcu() to wait for normal progs to finish
and finally do free_one() on each element when freeing objects
into global memory pool.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-14-alexei.starovoitov@gmail.com

The hash map is now fully converted to bpf_mem_alloc. Its implementation is not
allocating synchronously and not calling call_rcu() directly. It's now safe to
use non-preallocated hash maps in all types of tracing programs including
BPF_PROG_TYPE_PERF_EVENT that runs out of NMI context.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-13-alexei.starovoitov@gmail.com

Convert dynamic allocations in percpu hash map from alloc_percpu() to
bpf_mem_cache_alloc() from per-cpu bpf_mem_alloc. Since bpf_mem_alloc frees
objects after RCU gp the call_rcu() is removed. pcpu_init_value() now needs to
zero-fill per-cpu allocations, since dynamically allocated map elements are now
similar to full prealloc, since alloc_percpu() is not called inline and the
elements are reused in the freelist.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-12-alexei.starovoitov@gmail.com

Extend bpf_mem_alloc to cache free list of fixed size per-cpu allocations.
Once such cache is created bpf_mem_cache_alloc() will return per-cpu objects.
bpf_mem_cache_free() will free them back into global per-cpu pool after
observing RCU grace period.
per-cpu flavor of bpf_mem_alloc is going to be used by per-cpu hash maps.

The free list cache consists of tuples { llist_node, per-cpu pointer }
Unlike alloc_percpu() that returns per-cpu pointer
the bpf_mem_cache_alloc() returns a pointer to per-cpu pointer and
bpf_mem_cache_free() expects to receive it back.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-11-alexei.starovoitov@gmail.com

SLAB_TYPESAFE_BY_RCU makes kmem_caches non mergeable and slows down
kmem_cache_destroy. All bpf_mem_cache are safe to share across different maps
and programs. Convert SLAB_TYPESAFE_BY_RCU to batched call_rcu. This change
solves the memory consumption issue, avoids kmem_cache_destroy latency and
keeps bpf hash map performance the same.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-10-alexei.starovoitov@gmail.com

The same low/high watermarks for every bucket in bpf_mem_cache consume
significant amount of memory. Preallocating 64 elements of 4096 bytes each in
the free list is not efficient. Make low/high watermarks and batching value
dependent on element size. This change brings significant memory savings.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-9-alexei.starovoitov@gmail.com

Doing call_rcu() million times a second becomes a bottle neck.
Convert non-preallocated hash map from call_rcu to SLAB_TYPESAFE_BY_RCU.
The rcu critical section is no longer observed for one htab element
which makes non-preallocated hash map behave just like preallocated hash map.
The map elements are released back to kernel memory after observing
rcu critical section.
This improves 'map_perf_test 4' performance from 100k events per second
to 250k events per second.

bpf_mem_alloc + percpu_counter + typesafe_by_rcu provide 10x performance
boost to non-preallocated hash map and make it within few % of preallocated map
while consuming fraction of memory.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-8-alexei.starovoitov@gmail.com

The atomic_inc/dec might cause extreme cache line bouncing when multiple cpus
access the same bpf map. Based on specified max_entries for the hash map
calculate when percpu_counter becomes faster than atomic_t and use it for such
maps. For example samples/bpf/map_perf_test is using hash map with max_entries
1000. On a system with 16 cpus the 'map_perf_test 4' shows 14k events per
second using atomic_t. On a system with 15 cpus it shows 100k events per second
using percpu. map_perf_test is an extreme case where all cpus colliding on
atomic_t which causes extreme cache bouncing. Note that the slow path of
percpu_counter is 5k events per secound vs 14k for atomic, so the heuristic is
necessary. See comment in the code why the heuristic is based on
num_online_cpus().
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-7-alexei.starovoitov@gmail.com

Since bpf hash map was converted to use bpf_mem_alloc it is safe to use
from tracing programs and in RT kernels.
But per-cpu hash map is still using dynamic allocation for per-cpu map
values, hence keep the warning for this map type.
In the future alloc_percpu_gfp can be front-end-ed with bpf_mem_cache
and this restriction will be completely lifted.
perf_event (NMI) bpf programs have to use preallocated hash maps,
because free_htab_elem() is using call_rcu which might crash if re-entered.

Sleepable bpf programs have to use preallocated hash maps, because
life time of the map elements is not protected by rcu_read_lock/unlock.
This restriction can be lifted in the future as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-6-alexei.starovoitov@gmail.com

Make map_perf_test for preallocated and non-preallocated hash map
spend more time inside bpf program to focus performance analysis
on the speed of update/lookup/delete operations performed by bpf program.

It makes 'perf report' of bpf_mem_alloc look like:
 11.76%  map_perf_test    [k] _raw_spin_lock_irqsave
 11.26%  map_perf_test    [k] htab_map_update_elem
  9.70%  map_perf_test    [k] _raw_spin_lock
  9.47%  map_perf_test    [k] htab_map_delete_elem
  8.57%  map_perf_test    [k] memcpy_erms
  5.58%  map_perf_test    [k] alloc_htab_elem
  4.09%  map_perf_test    [k] __htab_map_lookup_elem
  3.44%  map_perf_test    [k] syscall_exit_to_user_mode
  3.13%  map_perf_test    [k] lookup_nulls_elem_raw
  3.05%  map_perf_test    [k] migrate_enable
  3.04%  map_perf_test    [k] memcmp
  2.67%  map_perf_test    [k] unit_free
  2.39%  map_perf_test    [k] lookup_elem_raw

Reduce default iteration count as well to make 'map_perf_test' quick enough
even on debug kernels.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-5-alexei.starovoitov@gmail.com

Make test_maps more stressful with more parallelism in
update/delete/lookup/walk including different value sizes.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-4-alexei.starovoitov@gmail.com

Convert bpf hash map to use bpf memory allocator.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-3-alexei.starovoitov@gmail.com

Tracing BPF programs can attach to kprobe and fentry. Hence they
run in unknown context where calling plain kmalloc() might not be safe.

Front-end kmalloc() with minimal per-cpu cache of free elements.
Refill this cache asynchronously from irq_work.

BPF programs always run with migration disabled.
It's safe to allocate from cache of the current cpu with irqs disabled.
Free-ing is always done into bucket of the current cpu as well.
irq_work trims extra free elements from buckets with kfree
and refills them with kmalloc, so global kmalloc logic takes care
of freeing objects allocated by one cpu and freed on another.

struct bpf_mem_alloc supports two modes:
- When size != 0 create kmem_cache and bpf_mem_cache for each cpu.
  This is typical bpf hash map use case when all elements have equal size.
- When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on
  kmalloc/kfree. Max allocation size is 4096 in this case.
  This is bpf_dynptr and bpf_kptr use case.

bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree.
bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free.

The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com

Add 1000BASE-KX interface mode. This 1G backplane ethernet as described in
clause 70. Clause 73 autonegotiation is mandatory, and only full duplex
operation is supported.

Although at the PMA level this interface mode is identical to
1000BASE-X, it uses a different form of in-band autonegation. This
justifies a separate interface mode, since the interface mode (along
with the MLO_AN_* autonegotiation mode) sets the type of autonegotiation
which will be used on a link. This results in more than just electrical
differences between the link modes.

With regard to 1000BASE-X, 1000BASE-KX holds a similar position to
SGMII: same signaling, but different autonegotiation. PCS drivers
(which typically handle in-band autonegotiation) may only support
1000BASE-X, and not 1000BASE-KX. Similarly, the phy mode is used to
configure serdes phys with phy_set_mode_ext. Due to the different
electrical standards (SFI or XFI vs Clause 70), they will likely want to
use different configuration. Adding a phy interface mode for
1000BASE-KX helps simplify configuration in these areas.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sean Anderson says:

====================
net: dpaa: Cleanups in preparation for phylink conversion (part 2)

This series contains several cleanup patches for dpaa/fman. While they
are intended to prepare for a phylink conversion, they stand on their
own. This series was originally submitted as part of [1].

[1] https://lore.kernel.org/netdev/20220715215954.1449214-1-sean.anderson@seco.com

Changes in v5:
- Reduce line length of tgec_config
- Reduce line length of qman_update_cgr_safe
- Rebase onto net-next/master

Changes in v4:
- weer -> were
- tricy -> tricky
- Use mac_dev for calling change_addr
- qman_cgr_create -> qman_create_cgr

Changes in v2:
- Fix prototype for dtsec_initialization
- Fix warning if sizeof(void *) != sizeof(resource_size_t)
- Specify type of mac_dev for exception_cb
- Add helper for sanity checking cgr ops
- Add CGR update function
- Adjust queue depth on rate change
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of setting the queue depth once during probe, adjust it on the
fly whenever we configure the link. This is a bit unusal, since usually
the DPAA driver calls into the FMAN driver, but here we do the opposite.
We need to add a netdev to struct mac_device for this, but it will soon
live in the phylink config.

I haven't tested this extensively, but it doesn't seem to break
anything. We could possibly optimize this a bit by keeping track of the
last rate, but for now we just update every time. 10GEC probably doesn't
need to call into this at all, but I've added it for consistency.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds a function to update a CGR with new parameters. qman_create_cgr
can almost be used for this (with flags=0), but it's not suitable because
it also registers the callback function. The _safe variant was modeled off
of qman_cgr_delete_safe. However, we handle multiple arguments and a return
value.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This breaks out/combines get_affine_portal and the cgr sanity check in
preparation for the next commit. No functional change intended.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several references to mac_dev in dpaa_netdev_init. Make things a
bit more concise by adding a local variable for it.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When disabling, there is nothing we can do about errors. In fact, the
only error which can occur is misuse of the API. Just warn in the mac
driver instead.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This removes the _return label, since something like

	err = -EFOO;
	goto _return;

can be replaced by the briefer

	return -EFOO;

Additionally, this skips going to _return_of_node_put when dev_node has
already been put (preventing a double put).
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a void pointer for mac_dev, specify its type
explicitly.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some params are already present in mac_dev. Use them directly instead of
passing them through params.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of having the mac init functions call back into the fman core to
get their params, just pass them directly to the init functions.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We don't need to remap the base address from the resource twice (once in
mac_probe() and again in set_fman_mac_params()). We still need the
resource to get the end address, but we can use a single function call
to get both at once.

While we're at it, use platform_get_mem_or_io and devm_request_resource
to map the resource. I think this is the more "correct" way to do things
here, since we use the pdev resource, instead of creating a new one.
It's still a bit tricky, since we need to ensure that the resource is a
child of the fman region when it gets requested.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>