- 14 Jan, 2021 8 commits
-
-
Atish Patra authored
This is a preparatory patch for unifying numa implementation between ARM64 & RISC-V. As the numa implementation will be moved to generic code, rename the arm64 related functions to a generic one. Signed-off-by: Atish Patra <atish.patra@wdc.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Damien Le Moal authored
Add a reset controller driver for the Canaan Kendryte K210 SoC. This driver relies on its syscon compatible parent node (sysctl) for its register mapping. Default this driver compilation to y when the SOC_CANAAN option is selected. The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210 SOC RESET CONTROLLER DRIVER" with myself listed as maintainer for this driver. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Damien Le Moal authored
Document the device tree bindings for the Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) pinctrl driver in Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml. The new header file include/dt-bindings/pinctrl/k210-fpioa.h is added to define all 256 possible pin functions of the SoC IO pins, as well as macros simplifying the definition of pin functions in a device tree. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Damien Le Moal authored
Document the device tree bindings for the Canaan Kendryte K210 SoC reset controller driver in Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml. The header file include/dt-bindings/reset/k210-rst.h is added to define all possible reset lines of the SoC. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Damien Le Moal authored
Document the device tree bindings of the Canaan Kendryte K210 SoC system controller driver in Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Damien Le Moal authored
Introduce the header file include/soc/canaan/k210-sysctl.h to have a common definition of the Canaan Kendryte K210 SoC system controller registers. Simplify the k210 system controller driver code by removing unused register bits definition. The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210 SOC SYSTEM CONTROLLER DRIVER" with myself listed as maintainer for this driver. This is a preparatory patch for introducing the K210 clock driver. No functional changes are introduced. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Damien Le Moal authored
Remove the clocks property from the cpu and clint nodes as these are ignored. Also remove the clock-frequency property from the cpu nodes as riscv relies on the timebase-frequency property. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Damien Le Moal authored
Rename configuration options and directories related to the Kendryte K210 SoC to use the SoC vendor name (canaan) instead of the "kendryte" branding name. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
- 08 Jan, 2021 12 commits
-
-
Damien Le Moal authored
All SiPeed K210 MAIX boards have the exact same vendor, arch and implementation IDs, preventing differentiation to select the correct device tree to use through the SOC_BUILTIN_DTB_DECLARE() macro. This result in this macro to be useless and mandates changing the code of the sysctl driver to change the builtin device tree suitable for the target board. Fix this problem by removing the SOC_BUILTIN_DTB_DECLARE() macro since it is used only for the K210 support. The code searching the builtin DTBs using the vendor, arch an implementation IDs is also removed. Support for builtin DTB falls back to the simpler and more traditional handling of builtin DTB using the CONFIG_BUILTIN_DTB option, similarly to other architectures. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Yash Shah authored
Add initial board data for the SiFive HiFive Unmatched A00. This patch is dependent on Zong's Patchset[0]. [0]: https://lore.kernel.org/linux-riscv/20201130082330.77268-4-zong.li@sifive.com/T/#uSigned-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Yash Shah authored
Add new compatible strings to the YAML DT binding document to support SiFive's HiFive Unmatched board Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Yash Shah authored
Add initial support for the SiFive FU540-C000 SoC. FU740-C000 is built around the SiFIve U7 Core Complex and a TileLink interconnect. This file is expected to grow as more device drivers are added to the kernel. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Yash Shah authored
Add new compatible strings to the DT binding documents to support SiFive FU740-C000. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Yash Shah authored
Add new compatible strings to the DT binding documents to support SiFive FU740-C000. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Yash Shah authored
Add new compatible strings in cpus.yaml to support the E71 and U74 CPU cores ("harts") that are present on FU740-C000 SoC. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Yash Shah authored
SiFive FU740 has 4 ECC interrupt sources as compared to 3 in FU540. Update the L2 cache controller driver to support this additional interrupt in case of FU740-C000 chip. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Yash Shah authored
The L2 cache controller in SiFive FU740 has 4 ECC interrupt sources as compared to 3 in FU540. Update the DT documentation accordingly with "compatible" and "interrupt" property changes. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Eric Lin authored
We found this issue in an legacy out-of-tree kernel module which didn't properly access user space pointer by get/put_user(). Such an illegal access loops in the page fault handler. To resolve this, let it die here. Signed-off-by: Eric Lin <tesheng@andestech.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Eric Lin authored
Like arm64, this patch adds a die_kernel_fault() helper to ensure the same semantics for the different kernel faults. Signed-off-by: Eric Lin <tesheng@andestech.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Kefeng Wang authored
Fix sbi_init() function declaration mismatch between RISCV_SBI enable and disable, as it always returned 0, make it void function. Drop some stubs which won't be used if RISCV_SBI disabled. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
- 03 Jan, 2021 1 commit
-
-
Linus Torvalds authored
-
- 02 Jan, 2021 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 cleanups from Vasily Gorbik: "Update defconfigs and sort config select list" * tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/Kconfig: sort config S390 select list once again s390: update defconfigs
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix a crash in intel_pstate during resume from suspend-to-RAM that may occur after recent changes and two resource leaks in error paths in the operating performance points (OPP) framework, add a new C-states table to intel_idle and update the cpuidle MAINTAINERS entry to cover the governors too. Specifics: - Fix recently introduced crash in the intel_pstate driver that occurs if scale-invariance is disabled during resume from suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR values made by the platform firmware (Rafael Wysocki). - Fix a memory leak and add a missing clk_put() in error paths in the OPP framework (Quanyang Wang, Viresh Kumar). - Add new C-states table for SnowRidge processors to the intel_idle driver (Artem Bityutskiy). - Update the MAINTAINERS entry for cpuidle to make it clear that the governors are covered by it too (Lukas Bulwahn)" * tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: add SnowRidge C-state table cpufreq: intel_pstate: Fix fast-switch fallback path opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: intel_pstate: Fix fast-switch fallback path * pm-cpuidle: intel_idle: add SnowRidge C-state table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
-
- 01 Jan, 2021 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big core two fixes are for power management ("block: Do not accept any requests while suspended" and "block: Fix a race in the runtime power management code") which finally sorts out the resume problems we've occasionally been having. To make the resume fix, there are seven necessary precursors which effectively renames REQ_PREEMPT to REQ_PM, so every "special" request in block is automatically a power management exempt one. All of the non-PM preempt cases are removed except for the one in the SCSI Parallel Interface (spi) domain validation which is a genuine case where we have to run requests at high priority to validate the bus so this becomes an autopm get/put protected request" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits) scsi: cxgb4i: Fix TLS dependency scsi: ufs: Un-inline ufshcd_vops_device_reset function scsi: ufs: Re-enable WriteBooster after device reset scsi: ufs-mediatek: Use correct path to fix compile error scsi: mpt3sas: Signedness bug in _base_get_diag_triggers() scsi: block: Do not accept any requests while suspended scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE scsi: scsi_transport_spi: Set RQF_PM for domain validation commands scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT scsi: ide: Do not set the RQF_PREEMPT flag for sense requests scsi: block: Introduce BLK_MQ_REQ_PM scsi: block: Fix a race in the runtime power management code scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff() scsi: ufs-pci: Fix restore from S4 for Intel controllers scsi: ufs-mediatek: Keep VCC always-on for specific devices scsi: ufs: Allow regulators being always-on scsi: ufs: Clear UAC for RPMB after ufshcd resets ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Two minor block fixes from this last week that should go into 5.11: - Add missing NOWAIT debugfs definition (Andres) - Fix kerneldoc warning introduced this merge window (Randy)" * tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block: block: add debugfs stanza for QUEUE_FLAG_NOWAIT fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few fixes that should go into 5.11, all marked for stable as well: - Fix issue around identity COW'ing and users that share a ring across processes - Fix a hang associated with unregistering fixed files (Pavel) - Move the 'process is exiting' cancelation a bit earlier, so task_works aren't affected by it (Pavel)" * tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block: kernel/io_uring: cancel io_uring before task works io_uring: fix io_sqe_files_unregister() hangs io_uring: add a helper for setting a ref node io_uring: don't assume mm is constant across submits
-
Linus Torvalds authored
Commit 436e980e ("kbuild: don't hardcode depmod path") stopped hard-coding the path of depmod, but in the process caused trouble for distributions that had that /sbin location, but didn't have it in the PATH (generally because /sbin is limited to the super-user path). Work around it for now by just adding /sbin to the end of PATH in the depmod.sh script. Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 31 Dec, 2020 3 commits
-
-
Pavel Begunkov authored
For cancelling io_uring requests it needs either to be able to run currently enqueued task_works or having it shut down by that moment. Otherwise io_uring_cancel_files() may be waiting for requests that won't ever complete. Go with the first way and do cancellations before setting PF_EXITING and so before putting the task_work infrastructure into a transition state where task_work_run() would better not be called. Cc: stable@vger.kernel.org # 5.5+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes, however requests keeping them may never complete, e.g. because of some userspace dependency. Make sure it's interruptible otherwise it would hang forever. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
Setting a new reference node to a file data is not trivial, don't repeat it, add and use a helper. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 30 Dec, 2020 6 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A fix for an edge case in MClientRequest encoding and a couple of trivial fixups for the new msgr2 support" * tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client: libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE libceph: align session_key and con_secret to 16 bytes libceph: fix auth_signature buffer allocation in secure mode ceph: reencode gid_list when reconnecting
-
Artem Bityutskiy authored
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville platforms. The following has been changed. 1. C1E latency changed from 10us to 15us. It was measured using the open source "wult" tool (the "nic" method, 15us is the 99.99th percentile). 2. C1E power break even changed from 20us to 25us, which may result in less C1E residency in some workloads. 3. C6 latency changed from 50us to 130us. Measured the same way as C1E. The C6 C-state is supported only by some SnowRidge revisions, so add a C-state table commentary about this. On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even though C6 is present in the table, the driver will only use it if the CPU does support it. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Rafael J. Wysocki authored
When sugov_update_single_perf() falls back to the "frequency" path due to the missing scale-invariance, it will call cpufreq_driver_fast_switch() via sugov_fast_switch() and the driver's ->fast_switch() callback will be invoked, so it must not be NULL. However, after commit a365ab6b ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to NULL when it is going to use intel_cpufreq_adjust_perf(), which is a mistake, because on x86 the scale-invariance may be turned off dynamically, so modify it to retain the original ->adjust_perf() callback pointer. Fixes: a365ab6b ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Reported-by: Kenneth R. Crudup <kenny@panix.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pmRafael J. Wysocki authored
Pull operating performance points (OPP) framework fixes for 5.11-rc2 from Viresh Kumar: "This contains two patches to fix freeing of resources in error paths." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table
-
Heiko Carstens authored
...and add comments at the top and bottom. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
-
Heiko Carstens authored
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
-
- 29 Dec, 2020 3 commits
-
-
Andres Freund authored
This was missed in 021a2446. Leads to the numeric value of QUEUE_FLAG_NOWAIT (i.e. 29) showing up in /sys/kernel/debug/block/*/state. Fixes: 021a2446 Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Randy Dunlap authored
Fix new kernel-doc warnings in fs/block_dev.c: ../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming' ../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev' Fixes: 4e7b5671 ("block: remove i_bdev") Fixes: 37c3fc9a ("block: simplify the block device claiming interface") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-fsdevel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "16 patches Subsystems affected by this patch series: mm (selftests, hugetlb, pagecache, mremap, kasan, and slub), kbuild, checkpatch, misc, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: slub: call account_slab_page() after slab page initialization zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c lib/zlib: fix inflating zlib streams on s390 lib/genalloc: fix the overflow when size is too big kdev_t: always inline major/minor helper functions sizes.h: add SZ_8G/SZ_16G/SZ_32G macros local64.h: make <asm/local64.h> mandatory kasan: fix null pointer dereference in kasan_record_aux_stack mm: generalise COW SMC TLB flushing race comment mm/mremap.c: fix extent calculation mm: memmap defer init doesn't work as expected mm: add prototype for __add_to_page_cache_locked() checkpatch: prefer strscpy to strlcpy Revert "kbuild: avoid static_assert for genksyms" mm/hugetlb: fix deadlock in hugetlb_cow error path selftests/vm: fix building protection keys test
-