- 06 Sep, 2019 40 commits
-
-
Oliver Neukum authored
commit 1426bd2c upstream. In case of a disconnect an ongoing flush() has to be made fail. Nevertheless we cannot be sure that any pending URB has already finished, so although they will never succeed, they still must not be touched. The clean solution for this is to check for WDM_IN_USE and WDM_DISCONNECTED in flush(). There is no point in ever clearing WDM_IN_USE, as no further writes make sense. The issue is as old as the driver. Fixes: afba937e ("USB: CDC WDM driver") Reported-by: syzbot+d232cca6ec42c2edb3fc@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190827103436.21143-1-oneukum@suse.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Henk van der Laan authored
commit 08d676d1 upstream. Revision 0x0117 suffers from an identical issue to earlier revisions, therefore it should be added to the quirks list. Signed-off-by:
Henk van der Laan <opensource@henkvdlaan.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190816200847.21366-1-opensource@henkvdlaan.comSigned-off-by:
-
Steven Rostedt (VMware) authored
commit 372e0d01 upstream. The race between adding a function probe and reading the probes that exist is very subtle. It needs a comment. Also, the issue can also happen if the probe has has the EMPTY_HASH as its func_hash. Cc: stable@vger.kernel.org Fixes: 7b60f3d8 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Naveen N. Rao authored
commit 5b0022dd upstream. In register_ftrace_function_probe(), we are not checking the return value of alloc_and_copy_ftrace_hash(). The subsequent call to ftrace_match_records() may end up dereferencing the same. Add a check to ensure this doesn't happen. Link: http://lkml.kernel.org/r/26e92574f25ad23e7cafa3cf5f7a819de1832cbe.1562249521.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: 1ec3a81a ("ftrace: Have each function probe use its own ftrace_ops") Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Naveen N. Rao authored
commit 7bd46644 upstream. LTP testsuite on powerpc results in the below crash: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc00000000029d800 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA PowerNV ... CPU: 68 PID: 96584 Comm: cat Kdump: loaded Tainted: G W NIP: c00000000029d800 LR: c00000000029dac4 CTR: c0000000001e6ad0 REGS: c0002017fae8ba10 TRAP: 0300 Tainted: G W MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28022422 XER: 20040000 CFAR: c00000000029d90c DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0 ... NIP [c00000000029d800] t_probe_next+0x60/0x180 LR [c00000000029dac4] t_mod_start+0x1a4/0x1f0 Call Trace: [c0002017fae8bc90] [c000000000cdbc40] _cond_resched+0x10/0xb0 (unreliable) [c0002017fae8bce0] [c0000000002a15b0] t_start+0xf0/0x1c0 [c0002017fae8bd30] [c0000000004ec2b4] seq_read+0x184/0x640 [c0002017fae8bdd0] [c0000000004a57bc] sys_read+0x10c/0x300 [c0002017fae8be30] [c00000000000b388] system_call+0x5c/0x70 The test (ftrace_set_ftrace_filter.sh) is part of ftrace stress tests and the crash happens when the test does 'cat $TRACING_PATH/set_ftrace_filter'. The address points to the second line below, in t_probe_next(), where filter_hash is dereferenced: hash = iter->probe->ops.func_hash->filter_hash; size = 1 << hash->size_bits; This happens due to a race with register_ftrace_function_probe(). A new ftrace_func_probe is created and added into the func_probes list in trace_array under ftrace_lock. However, before initializing the filter, we drop ftrace_lock, and re-acquire it after acquiring regex_lock. If another process is trying to read set_ftrace_filter, it will be able to acquire ftrace_lock during this window and it will end up seeing a NULL filter_hash. Fix this by just checking for a NULL filter_hash in t_probe_next(). If the filter_hash is NULL, then this probe is just being added and we can simply return from here. Link: http://lkml.kernel.org/r/05e021f757625cbbb006fad41380323dbe4e3b43.1562249521.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: 7b60f3d8 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array") Signed-off-by:
-
Bandan Das authored
commit 558682b5 upstream. Although APIC initialization will typically clear out the LDR before setting it, the APIC cleanup code should reset the LDR. This was discovered with a 32-bit KVM guest jumping into a kdump kernel. The stale bits in the LDR triggered a bug in the KVM APIC implementation which caused the destination mapping for VCPUs to be corrupted. Note that this isn't intended to paper over the KVM APIC bug. The kernel has to clear the LDR when resetting the APIC registers except when X2APIC is enabled. This lacks a Fixes tag because missing to clear LDR goes way back into pre git history. [ tglx: Made x2apic_enabled a function call as required ] Signed-off-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190826101513.5080-3-bsd@redhat.comSigned-off-by:
-
Bandan Das authored
commit bae3a8d3 upstream. Legacy apic init uses bigsmp for smp systems with 8 and more CPUs. The bigsmp APIC implementation uses physical destination mode, but it nevertheless initializes LDR and DFR. The LDR even ends up incorrectly with multiple bit being set. This does not cause a functional problem because LDR and DFR are ignored when physical destination mode is active, but it triggered a problem on a 32-bit KVM guest which jumps into a kdump kernel. The multiple bits set unearthed a bug in the KVM APIC implementation. The code which creates the logical destination map for VCPUs ignores the disabled state of the APIC and ends up overwriting an existing valid entry and as a result, APIC calibration hangs in the guest during kdump initialization. Remove the bogus LDR/DFR initialization. This is not intended to work around the KVM APIC bug. The LDR/DFR ininitalization is wrong on its own. The issue goes back into the pre git history. The fixes tag is the commit in the bitkeeper import which introduced bigsmp support in 2003. git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: db7b9e9f ("[PATCH] Clustered APIC setup for >8 CPU systems") Suggested-by:
-
Sebastian Mayr authored
commit 9212ec7d upstream. 32-bit processes running on a 64-bit kernel are not always detected correctly, causing the process to crash when uretprobes are installed. The reason for the crash is that in_ia32_syscall() is used to determine the process's mode, which only works correctly when called from a syscall. In the case of uretprobes, however, the function is called from a exception and always returns 'false' on a 64-bit kernel. In consequence this leads to corruption of the process's return address. Fix this by using user_64bit_mode() instead of in_ia32_syscall(), which is correct in any situation. [ tglx: Add a comment and the following historical info ] This should have been detected by the rename which happened in commit abfb9498 ("x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall()") which states in the changelog: The is_ia32_task()/is_x32_task() function names are a big misnomer: they suggests that the compat-ness of a system call is a task property, which is not true, the compatness of a system call purely depends on how it was invoked through the system call layer. ..... and then it went and blindly renamed every call site. Sadly enough this was already mentioned here: 8faaed1b ("uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr()") where the changelog says: TODO: is_ia32_task() is not what we actually want, TS_COMPAT does not necessarily mean 32bit. Fortunately syscall-like insns can't be probed so it actually works, but it would be better to rename and use is_ia32_frame(). and goes all the way back to: 0326f5a9 ("uprobes/core: Handle breakpoint and singlestep exceptions") Oh well. 7+ years until someone actually tried a uretprobe on a 32bit process on a 64bit kernel.... Fixes: 0326f5a9 ("uprobes/core: Handle breakpoint and singlestep exceptions") Signed-off-by:
Sebastian Mayr <me@sam.st> Signed-off-by:
-
Sean Christopherson authored
commit 75ee23b3 upstream. Don't advance RIP or inject a single-step #DB if emulation signals a fault. This logic applies to all state updates that are conditional on clean retirement of the emulation instruction, e.g. updating RFLAGS was previously handled by commit 38827dbd ("KVM: x86: Do not update EFLAGS on faulting emulation"). Not advancing RIP is likely a nop, i.e. ctxt->eip isn't updated with ctxt->_eip until emulation "retires" anyways. Skipping #DB injection fixes a bug reported by Andy Lutomirski where a #UD on SYSCALL due to invalid state with EFLAGS.TF=1 would loop indefinitely due to emulation overwriting the #UD with #DB and thus restarting the bad SYSCALL over and over. Cc: Nadav Amit <nadav.amit@gmail.com> Cc: stable@vger.kernel.org Reported-by:
Andy Lutomirski <luto@kernel.org> Fixes: 663f4c61 ("KVM: x86: handle singlestep during emulation") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Radim Krcmar authored
commit b14c876b upstream. recalculate_apic_map does not santize ldr and it's possible that multiple bits are set. In that case, a previous valid entry can potentially be overwritten by an invalid one. This condition is hit when booting a 32 bit, >8 CPU, RHEL6 guest and then triggering a crash to boot a kdump kernel. This is the sequence of events: 1. Linux boots in bigsmp mode and enables PhysFlat, however, it still writes to the LDR which probably will never be used. 2. However, when booting into kdump, the stale LDR values remain as they are not cleared by the guest and there isn't a apic reset. 3. kdump boots with 1 cpu, and uses Logical Destination Mode but the logical map has been overwritten and points to an inactive vcpu. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 1a15718b upstream. Behringer UFX1604 requires the similar quirk to apply implicit fb like another Behringer model UFX1204 in order to fix the noisy playback. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204631 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 6de3c9e3 upstream. The quirk function snd_emuusb_set_samplerate() has a NULL check for the mixer element, but this is useless in the current code. It used to be a check against mixer->id_elems[unitid] but it was changed later to the value after mixer_eleme_list_to_info() which is always non-NULL due to the container_of() usage. This patch fixes the check before the conversion. While we're at it, correct a typo in the comment in the function, too. Fixes: 8c558076 ("ALSA: usb-audio: Clean up mixer element list traverse") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 75545304 upstream. The input pool of a client might be deleted via the resize ioctl, the the access to it should be covered by the proper locks. Currently the only missing place is the call in snd_seq_ioctl_get_client_pool(), and this patch papers over it. Reported-by: syzbot+4a75454b9ca2777f35c7@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jeronimo Borque authored
commit f9ef724d upstream. "enabled" parameter historically referred to the device input or output, not to the led indicator. After the changes added with the led helper functions the mic mute led logic refers to the led and not to the mic input which caused led indicator to be negated. Fixing logic in cxt_update_gpio_led and updated cxt_fixup_gpio_mute_hook Also updated debug messages to ease further debugging if necessary. Fixes: 184e302b ("ALSA: hda/conexant - Use the mic-mute LED helper") Suggested-by:
Jeronimo Borque <jeronimo@borque.com.ar> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 1bc8d18c upstream. I forgot to release the allocated object at the early error path in line6_init_pcm(). For addressing it, slightly shuffle the code so that the PCM destructor (pcm->private_free) is assigned properly before all error paths. Fixes: 34501219 ("ALSA: line6: Fix write on zero-sized buffer") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit f9f0e9ed upstream. The bmControls (for UAC1) or bmMixerControls (for UAC2/3) bitmap has a variable size depending on both input and output pins. Its size is to fit with input * output bits. The problem is that the input size can't be determined simply from the unit descriptor itself but it needs to parse the whole connected sources. Although the uac_mixer_unit_get_channels() tries to check some possible overflow of this bitmap, it's incomplete due to the lack of the evaluation of input pins. For covering possible overflows, this patch adds the bitmap overflow check in the loop of input pins in parse_audio_mixer_unit(). Fixes: 0bfe5e43 ("ALSA: usb-audio: Check mixer unit descriptors more strictly") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Andrew Morton authored
commit 441e254c upstream. Fixes: 701d6785 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool") Link: http://lkml.kernel.org/r/201908251039.5oSbEEUT%25lkp@intel.comReported-by:
kbuild test robot <lkp@intel.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Henry Burns <henrywolfeburns@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Jonathan Adams <jwadams@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit e2c69393 ] In __icmp_send() there is a possibility that the rt->dst.dev is NULL, e,g, with tunnel collect_md mode, which will cause kernel crash. Here is what the code path looks like, for GRE: - ip6gre_tunnel_xmit - ip6gre_xmit_ipv4 - __gre6_xmit - ip6_tnl_xmit - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE - icmp_send - net = dev_net(rt->dst.dev); <-- here The reason is __metadata_dst_init() init dst->dev to NULL by default. We could not fix it in __metadata_dst_init() as there is no dev supplied. On the other hand, the reason we need rt->dst.dev is to get the net. So we can just try get it from skb->dev when rt->dst.dev is NULL. v4: Julian Anastasov remind skb->dev also could be NULL. We'd better still use dst.dev and do a check to avoid crash. v3: No changes. v2: fix the issue in __icmp_send() instead of updating shared dst dev in {ip_md, ip6}_tunnel_xmit. Fixes: c8b34e68 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ef8d8ccd ] As Jason Baron explained in commit 790ba456 ("tcp: set SOCK_NOSPACE under memory pressure"), it is crucial we properly set SOCK_NOSPACE when needed. However, Jason patch had a bug, because the 'nonblocking' status as far as sk_stream_wait_memory() is concerned is governed by MSG_DONTWAIT flag passed at sendmsg() time : long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT); So it is very possible that tcp sendmsg() calls sk_stream_wait_memory(), and that sk_stream_wait_memory() returns -EAGAIN with SOCK_NOSPACE cleared, if sk->sk_sndtimeo has been set to a small (but not zero) value. This patch removes the 'noblock' variable since we must always set SOCK_NOSPACE if -EAGAIN is returned. It also renames the do_nonblock label since we might reach this code path even if we were in blocking mode. Fixes: 790ba456 ("tcp: set SOCK_NOSPACE under memory pressure") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Reported-by:
Vladimir Rutsky <rutsky@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
-
Jason Baron authored
[ Upstream commit 4651d180 ] Currently, we are only explicitly setting SOCK_NOSPACE on a write timeout for non-blocking sockets. Epoll() edge-trigger mode relies on SOCK_NOSPACE being set when -EAGAIN is returned to ensure that EPOLLOUT is raised. Expand the setting of SOCK_NOSPACE to non-blocking sockets as well that can use SO_SNDTIMEO to adjust their write timeout. This mirrors the behavior that Eric Dumazet introduced for tcp sockets. Signed-off-by:
-
David Ahern authored
[ Upstream commit c7036d97 ] A user reported that routes are getting installed with type 0 (RTN_UNSPEC) where before the routes were RTN_UNICAST. One example is from accel-ppp which apparently still uses the ioctl interface and does not set rtmsg_type. Another is the netlink interface where ipv6 does not require rtm_type to be set (v4 does). Prior to the commit in the Fixes tag the ipv6 stack converted type 0 to RTN_UNICAST, so restore that behavior. Fixes: e8478e80 ("net/ipv6: Save route type in rt6_info") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit f17f7648 ] In commit 93a714d6 ("multicast: Extend ip address command to enable multicast group join/leave on") we added a new flag IFA_F_MCAUTOJOIN to make user able to add multicast address on ethernet interface. This works for IPv4, but not for IPv6. See the inet6_addr_add code. static int inet6_addr_add() { ... if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) { ipv6_mc_config(net->ipv6.mc_autojoin_sk, true...) } ifp = ipv6_add_addr(idev, cfg, true, extack); <- always fail with maddr if (!IS_ERR(ifp)) { ... } else if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) { ipv6_mc_config(net->ipv6.mc_autojoin_sk, false...) } } But in ipv6_add_addr() it will check the address type and reject multicast address directly. So this feature is never worked for IPv6. We should not remove the multicast address check totally in ipv6_add_addr(), but could accept multicast address only when IFA_F_MCAUTOJOIN flag supplied. v2: update commit description Fixes: 93a714d6 ("multicast: Extend ip address command to enable multicast group join/leave on") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
-
John Fastabend authored
[ Upstream commit d85f0177 ] The ctx->sk_write_space pointer is only set when TLS tx mode is enabled. When running without TX mode its a null pointer but we still set the sk sk_write_space pointer on close(). Fix the close path to only overwrite sk->sk_write_space when the current pointer is to the tls_write_space function indicating the tls module should clean it up properly as well. Reported-by:
Hillf Danton <hdanton@sina.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: 57c722e9 ("net/tls: swap sk_write_space on close") Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 57c722e9 ] Now that we swap the original proto and clear the ULP pointer on close we have to make sure no callback will try to access the freed state. sk_write_space is not part of sk_prot, remember to swap it. Reported-by: syzbot+dcdc9deefaec44785f32@syzkaller.appspotmail.com Fixes: 95fa1454 ("bpf: sockmap/tls, close can race with map free") Signed-off-by:
-
Vakul Garg authored
[ Upstream commit 15008579 ] In tls_sw_sendmsg() and tls_sw_sendpage(), the variable 'ret' has been set to return value of tls_complete_pending_work(). This allows return of proper error code if tls_complete_pending_work() fails. Fixes: 3c4d7559 ("tls: kernel TLS support") Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Signed-off-by:
-
Jyri Sarha authored
[ Upstream commit 432973fd ] Register cpufreq notifier after we have initialized the crtc and unregister it before we remove the ctrc. Receiving a cpufreq notify without crtc causes a crash. Reported-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pedro Sousa authored
[ Upstream commit ebcb8f85 ] Fix RX_TERMINATION_FORCE_ENABLE define value from 0x0089 to 0x00A9 according to MIPI Alliance MPHY specification. Fixes: e785060e ("ufs: definitions for phy interface") Signed-off-by:
Pedro Sousa <sousa@synopsys.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit c08f99c3 ] We don't free the edid blob allocated by the call to drm_get_edid(), causing a memleak. Fix this by calling kfree(edid) at the end of the get_modes(). Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190610135739.6077-1-tomi.valkeinen@ti.comSigned-off-by:
-
Stefan Wahren authored
[ Upstream commit 215e06f0 ] The commit 5e6acc3e ("bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.") broke module autoloading on Raspberry Pi. So add a module alias this fix this. Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Lionel Landwerlin authored
[ Upstream commit 63ac3328 ] subslice_mask is an array indexed by slice, not subslice. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 8cc76693 ("drm/i915: store all subslice masks") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108712Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112123931.2815-1-lionel.g.landwerlin@intel.comSigned-off-by:
-
Adrian Vladu authored
[ Upstream commit b0995156 ] HyperV KVP and VSS daemons should exit with 0 when the '--help' or '-h' flags are used. Signed-off-by:
Adrian Vladu <avladu@cloudbasesolutions.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com> Signed-off-by:
-
Adrian Vladu authored
[ Upstream commit 5912e791 ] Fixed pep8/flake8 python style code for lsvmbus tool. The TAB indentation was on purpose ignored (pep8 rule W191) to make sure the code is complying with the Linux code guideline. The following command doe not show any warnings now: pep8 --ignore=W191 lsvmbus flake8 --ignore=W191 lsvmbus Signed-off-by:
-
Hans Ulli Kroll authored
[ Upstream commit 77775888 ] On the Gemini SoC the FOTG2 stalls after port reset so restart the HCD after each port reset. Signed-off-by:
Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.orgSigned-off-by:
-
Y.C. Chen authored
[ Upstream commit 05b43971 ] There is another thread still access standard VGA I/O while loading drm driver. Disable standard VGA I/O decode to avoid this issue. Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-email-yc_chen@aspeedtech.comSigned-off-by:
-
Wolfram Sang authored
[ Upstream commit d7437fc0 ] After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device. Fixes: c31d0a00 ("i2c: emev2: add slave support") Reported-by:
Krzysztof Adamski <krzysztof.adamski@nokia.com> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit 7b814d85 ] After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device. Fixes: de20d185 ("i2c: rcar: add slave support") Reported-by:
-
Will Deacon authored
[ Upstream commit 5717fe5a ] If a CPU doesn't support the page size for which the kernel is configured, then we will complain and refuse to bring it online. For secondary CPUs (and the boot CPU on a system booting with EFI), we will also print an error identifying the mismatch. Consequently, the only time that the cpufeature code can detect a granule size mismatch is for a granule other than the one that is currently being used. Although we would rather such systems didn't exist, we've unfortunately lost that battle and Kevin reports that on his amlogic S922X (odroid-n2 board) we end up warning and taining with defconfig because 16k pages are not supported by all of the CPUs. In such a situation, we don't actually care about the feature mismatch, particularly now that KVM only exposes the sanitised view of the CPU registers (commit 93390c0a - "arm64: KVM: Hide unsupported AArch64 CPU features from guests"). Treat the granule fields as non-strict and let Kevin run without a tainted kernel. Cc: Marc Zyngier <maz@kernel.org> Reported-by:
Kevin Hilman <khilman@baylibre.com> Tested-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> [catalin.marinas@arm.com: changelog updated with KVM sanitised regs commit] Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit ae78ca3c ] In read_per_ring_refs(), after 'req' and related memory regions are allocated, xen_blkif_map() is invoked to map the shared frame, irq, and etc. However, if this mapping process fails, no cleanup is performed, leading to memory leaks. To fix this issue, invoke the cleanup before returning the error. Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Benjamin Herrenschmidt authored
[ Upstream commit 4a56a478 ] If fsg_disable() and fsg_set_alt() are called too closely to each other (for example due to a quick reset/reconnect), what can happen is that fsg_set_alt sets common->new_fsg from an interrupt while handle_exception is trying to process the config change caused by fsg_disable(): fsg_disable() ... handle_exception() sets state back to FSG_STATE_NORMAL hasn't yet called do_set_interface() or is inside it. ---> interrupt fsg_set_alt sets common->new_fsg queues a new FSG_STATE_CONFIG_CHANGE <--- Now, the first handle_exception can "see" the updated new_fsg, treats it as if it was a fsg_set_alt() response, call usb_composite_setup_continue() etc... But then, the thread sees the second FSG_STATE_CONFIG_CHANGE, and goes back down the same path, wipes and reattaches a now active fsg, and .. calls usb_composite_setup_continue() which at this point is wrong. Not only we get a backtrace, but I suspect the second set_interface wrecks some state causing the host to get upset in my case. This fixes it by replacing "new_fsg" by a "state argument" (same principle) which is set in the same lock section as the state update, and retrieved similarly. That way, there is never any discrepancy between the dequeued state and the observed value of it. We keep the ability to have the latest reconfig operation take precedence, but we guarantee that once "dequeued" the argument (new_fsg) will not be clobbered by any new event. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
[ Upstream commit 602fda17 ] In some cases, one can get out of suspend with a reset or a disconnect followed by a reconnect. Previously we would leave a stale suspended flag set. Signed-off-by:
-
