Mostly due to descriptions not keeping up with API changes.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/libfc/fc_fcp.c:299: warning: Function parameter or member 'status_code' not described in 'fc_fcp_retry_cmd'
 drivers/scsi/libfc/fc_fcp.c:595: warning: Function parameter or member 'seq' not described in 'fc_fcp_send_data'
 drivers/scsi/libfc/fc_fcp.c:595: warning: Excess function parameter 'sp' description in 'fc_fcp_send_data'
 drivers/scsi/libfc/fc_fcp.c:1289: warning: Function parameter or member 't' not described in 'fc_lun_reset_send'
 drivers/scsi/libfc/fc_fcp.c:1289: warning: Excess function parameter 'data' description in 'fc_lun_reset_send'
 drivers/scsi/libfc/fc_fcp.c:1422: warning: Function parameter or member 't' not described in 'fc_fcp_timeout'
 drivers/scsi/libfc/fc_fcp.c:1422: warning: Excess function parameter 'data' description in 'fc_fcp_timeout'
 drivers/scsi/libfc/fc_fcp.c:1696: warning: Function parameter or member 'code' not described in 'fc_fcp_recovery'
 drivers/scsi/libfc/fc_fcp.c:1716: warning: Function parameter or member 'offset' not described in 'fc_fcp_srr'
 drivers/scsi/libfc/fc_fcp.c:1859: warning: Function parameter or member 'sc_cmd' not described in 'fc_queuecommand'
 drivers/scsi/libfc/fc_fcp.c:1859: warning: Excess function parameter 'cmd' description in 'fc_queuecommand'

Link: https://lore.kernel.org/r/20200713074645.126138-13-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/libfc/fc_rport.c:129: warning: Function parameter or member 'port_id' not described in 'fc_rport_create'
 drivers/scsi/libfc/fc_rport.c:129: warning: Excess function parameter 'ids' description in 'fc_rport_create'
 drivers/scsi/libfc/fc_rport.c:1452: warning: Function parameter or member 'rdata_arg' not described in 'fc_rport_logo_resp'
 drivers/scsi/libfc/fc_rport.c:1452: warning: Excess function parameter 'lport_arg' description in 'fc_rport_logo_resp'

Link: https://lore.kernel.org/r/20200713074645.126138-12-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Either misdocumentation and/or bitrot.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/libfc/fc_lport.c:412: warning: Function parameter or member 'in_fp' not described in 'fc_lport_recv_echo_req'
 drivers/scsi/libfc/fc_lport.c:412: warning: Excess function parameter 'fp' description in 'fc_lport_recv_echo_req'
 drivers/scsi/libfc/fc_lport.c:447: warning: Function parameter or member 'in_fp' not described in 'fc_lport_recv_rnid_req'
 drivers/scsi/libfc/fc_lport.c:447: warning: Excess function parameter 'fp' description in 'fc_lport_recv_rnid_req'
 drivers/scsi/libfc/fc_lport.c:1330: warning: Function parameter or member 'state' not described in 'fc_lport_enter_ns'
 drivers/scsi/libfc/fc_lport.c:1428: warning: Function parameter or member 'state' not described in 'fc_lport_enter_ms'
 drivers/scsi/libfc/fc_lport.c:1939: warning: Function parameter or member 'tov' not described in 'fc_lport_els_request'

Link: https://lore.kernel.org/r/20200713074645.126138-11-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Looks like the return value of readw() has never been checked.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’:
 drivers/scsi/qedf/qedf_main.c:3203:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200713074645.126138-10-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

No attempt has been made to document either of the demoted functions here.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qedf/qedf_main.c:1027: warning: Function parameter or member 'lport' not described in 'qedf_xmit'
 drivers/scsi/qedf/qedf_main.c:1027: warning: Function parameter or member 'fp' not described in 'qedf_xmit'
 drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'lport' not described in 'qedf_rport_event_handler'
 drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'rdata' not described in 'qedf_rport_event_handler'
 drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'event' not described in 'qedf_rport_event_handler'

Link: https://lore.kernel.org/r/20200713074645.126138-9-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

>From bitrotted and missing function parameters to misuse of kerneldoc format.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Function parameter or member 'lport' not described in 'bnx2fc_update_src_mac'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Function parameter or member 'addr' not described in 'bnx2fc_update_src_mac'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Excess function parameter 'fip' description in 'bnx2fc_update_src_mac'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Excess function parameter 'old' description in 'bnx2fc_update_src_mac'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Excess function parameter 'new' description in 'bnx2fc_update_src_mac'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1670: warning: Function parameter or member 'netdev' not described in 'bnx2fc_destroy'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1670: warning: Excess function parameter 'buffer' description in 'bnx2fc_destroy'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1670: warning: Excess function parameter 'kp' description in 'bnx2fc_destroy'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2108: warning: Function parameter or member 'netdev' not described in 'bnx2fc_disable'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2236: warning: Function parameter or member 'netdev' not described in 'bnx2fc_enable'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2529: warning: Function parameter or member 'dev' not described in 'bnx2fc_ulp_exit'
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2962: warning: cannot understand function prototype: 'struct scsi_host_template bnx2fc_shost_template = '
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2996: warning: cannot understand function prototype: 'struct cnic_ulp_ops bnx2fc_cnic_cb = '

Link: https://lore.kernel.org/r/20200713074645.126138-8-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Mainly due to misdocumentation or bitrotted descriptions.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/fcoe/fcoe_transport.c:396: warning: Function parameter or member 'skb' not described in 'fcoe_check_wait_queue'
 drivers/scsi/fcoe/fcoe_transport.c:447: warning: Function parameter or member 't' not described in 'fcoe_queue_timer'
 drivers/scsi/fcoe/fcoe_transport.c:447: warning: Excess function parameter 'lport' description in 'fcoe_queue_timer'
 drivers/scsi/fcoe/fcoe_transport.c:682: warning: Function parameter or member 'netdev' not described in 'fcoe_netdev_map_lookup'

Link: https://lore.kernel.org/r/20200713074645.126138-7-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Mostly missing or incorrect (bitrotted) function parameters.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/fcoe/fcoe_ctlr.c:139: warning: Function parameter or member 'mode' not described in 'fcoe_ctlr_init'
 drivers/scsi/fcoe/fcoe_ctlr.c:604: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_encaps'
 drivers/scsi/fcoe/fcoe_ctlr.c:1312: warning: Function parameter or member 'skb' not described in 'fcoe_ctlr_recv_clr_vlink'
 drivers/scsi/fcoe/fcoe_ctlr.c:1312: warning: Excess function parameter 'fh' description in 'fcoe_ctlr_recv_clr_vlink'
 drivers/scsi/fcoe/fcoe_ctlr.c:1781: warning: Function parameter or member 't' not described in 'fcoe_ctlr_timeout'
 drivers/scsi/fcoe/fcoe_ctlr.c:1781: warning: Excess function parameter 'arg' description in 'fcoe_ctlr_timeout'
 drivers/scsi/fcoe/fcoe_ctlr.c:1904: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_recv_flogi'
 drivers/scsi/fcoe/fcoe_ctlr.c:2166: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop_locked'
 drivers/scsi/fcoe/fcoe_ctlr.c:2166: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop_locked'
 drivers/scsi/fcoe/fcoe_ctlr.c:2188: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop'
 drivers/scsi/fcoe/fcoe_ctlr.c:2188: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop'
 drivers/scsi/fcoe/fcoe_ctlr.c:2204: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop_final'
 drivers/scsi/fcoe/fcoe_ctlr.c:2204: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop_final'
 drivers/scsi/fcoe/fcoe_ctlr.c:2273: warning: Function parameter or member 'frport' not described in 'fcoe_ctlr_vn_parse'
 drivers/scsi/fcoe/fcoe_ctlr.c:2273: warning: Excess function parameter 'rdata' description in 'fcoe_ctlr_vn_parse'
 drivers/scsi/fcoe/fcoe_ctlr.c:2804: warning: Function parameter or member 'frport' not described in 'fcoe_ctlr_vlan_parse'
 drivers/scsi/fcoe/fcoe_ctlr.c:2804: warning: Excess function parameter 'rdata' description in 'fcoe_ctlr_vlan_parse'
 drivers/scsi/fcoe/fcoe_ctlr.c:2900: warning: Excess function parameter 'min_len' description in 'fcoe_ctlr_vlan_send'
 drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Function parameter or member 'fip' not described in 'fcoe_ctlr_vlan_recv'
 drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Function parameter or member 'skb' not described in 'fcoe_ctlr_vlan_recv'
 drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Excess function parameter 'lport' description in 'fcoe_ctlr_vlan_recv'
 drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Excess function parameter 'fp' description in 'fcoe_ctlr_vlan_recv'
 drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Function parameter or member 'callback' not described in 'fcoe_ctlr_disc_start'
 drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_start'
 drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_start'

[mkp: fixed function name in comment]

Link: https://lore.kernel.org/r/20200713074645.126138-6-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

A couple of headers make no attempt to document their associated function
parameters.  Others looks as if they are suffering with a little bitrot.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/fcoe/fcoe.c:654: warning: Function parameter or member 'lport' not described in 'fcoe_netdev_features_change'
 drivers/scsi/fcoe/fcoe.c:654: warning: Function parameter or member 'netdev' not described in 'fcoe_netdev_features_change'
 drivers/scsi/fcoe/fcoe.c:2039: warning: Function parameter or member 'ctlr_dev' not described in 'fcoe_ctlr_mode'
 drivers/scsi/fcoe/fcoe.c:2039: warning: Excess function parameter 'cdev' description in 'fcoe_ctlr_mode'
 drivers/scsi/fcoe/fcoe.c:2144: warning: Function parameter or member 'fcoe' not described in 'fcoe_dcb_create'
 drivers/scsi/fcoe/fcoe.c:2144: warning: Excess function parameter 'netdev' description in 'fcoe_dcb_create'
 drivers/scsi/fcoe/fcoe.c:2144: warning: Excess function parameter 'port' description in 'fcoe_dcb_create'
 drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'lport' not described in 'fcoe_elsct_send'
 drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'did' not described in 'fcoe_elsct_send'
 drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'fp' not described in 'fcoe_elsct_send'
 drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'op' not described in 'fcoe_elsct_send'
 drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'resp' not described in 'fcoe_elsct_send'
 drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'arg' not described in 'fcoe_elsct_send'
 drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'timeout' not described in 'fcoe_elsct_send'

Link: https://lore.kernel.org/r/20200713074645.126138-5-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This is my fault (can't even blame copy/paste).

Link: https://lore.kernel.org/r/20200713074645.126138-4-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

According to 'include/scsi/scsi_transport_fc.h':

 "Attributes are based on HBAAPI V2.0 definitions"

... so it seems sane to match the 'HBA Attribute Length' to them.

If we don't, the compiler complains that the copied data will be truncated.

Fixes the following W=1 kernel build warning(s):

 In file included from include/linux/bitmap.h:9,
 from include/linux/cpumask.h:12,
 from include/linux/smp.h:13,
 from include/linux/percpu.h:7,
 from include/scsi/libfc.h:13,
 from drivers/scsi/libfc/fc_elsct.c:17:
 In function ‘strncpy’,
 inlined from ‘fc_ct_ms_fill.constprop’ at include/scsi/fc_encode.h:263:3:
 include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output may be truncated copying 64 bytes from a string of length  79 [-Wstringop-truncation]
 297 | #define __underlying_strncpy __builtin_strncpy
 | ^
 include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
 307 | return __underlying_strncpy(p, q, size);
 | ^~~~~~~~~~~~~~~~~~~~
 In function ‘strncpy’,
 inlined from ‘fc_ct_ms_fill.constprop’ at include/scsi/fc_encode.h:275:3:
 include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output may be truncated copying 64 bytes from a string of length 79 [-Wstringop-truncation]
 297 | #define __underlying_strncpy __builtin_strncpy
 | ^
 include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
 307 | return __underlying_strncpy(p, q, size);
 | ^~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200713074645.126138-3-lee.jones@linaro.orgReviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/libfc/fc_exch.c:66: warning: Function parameter or member 'left' not described in 'fc_exch_pool'
 drivers/scsi/libfc/fc_exch.c:66: warning: Function parameter or member 'right' not described in 'fc_exch_pool'
 drivers/scsi/libfc/fc_exch.c:100: warning: Function parameter or member 'lport' not described in 'fc_exch_mgr'
 drivers/scsi/libfc/fc_exch.c:727: warning: Function parameter or member 'ep' not described in 'fc_invoke_resp'
 drivers/scsi/libfc/fc_exch.c:727: warning: Function parameter or member 'sp' not described in 'fc_invoke_resp'
 drivers/scsi/libfc/fc_exch.c:727: warning: Function parameter or member 'fp' not described in 'fc_invoke_resp'

Link: https://lore.kernel.org/r/20200713074645.126138-2-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This driver maintains a version number which is cross-referenced in the
documentation (e.g. to indicate when features are added or changed) and
exposed through the responses to various SCSI commands. For example the
version number is use as the Product Revision number in standard SCSI
INQUIRY responses issued by this driver. The version date string is placed
in a vendor specific area in each standard SCSI INQUIRY response. This
patch bumps both.

Update the driver documentation URL that appears at the top of the driver
source file.

Link: https://lore.kernel.org/r/20200712182927.72044-3-dgilbert@interlog.comSigned-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch simplifies, or at least makes more consistent, the way setting
the every_nth parameter injects errors. Here is a list of 'opts' flags and
in which cases they inject errors when abs(every_nth)%command_count == 0 is
reached:

  - OPT_RECOVERED_ERR: issued on READ(*)s, WRITE(*)s and
                       WRITE_SCATTEREDs
  - OPT_DIF_ERR:       issued on READ(*)s, WRITE(*)s and
                       WRITE_SCATTEREDs
  - OPT_DIX_ERR:       issued on READ(*)s, WRITE(*)s and
                       WRITE_SCATTEREDs
  - OPT_SHORT_TRANSFER: issued on READ(*)s
  - OPT_TRANSPORT_ERR: issued on all commands
  - OPT_CMD_ABORT:     issued on all commands

The other uses of every_nth were not modified.

Previously if, for example, OPT_SHORT_TRANSFER was armed then if
(abs(every_nth) % command_count == 0) occurred during a command that was
_not_ a READ, then no error injection occurred. This behaviour puzzled
several testers. Now a global "inject_pending" flag is set and the _next_
READ will get hit and that flag is cleared. OPT_RECOVERED_ERR, OPT_DIF_ERR
and OPT_DIX_ERR have similar behaviour. A downside of this is that there
might be a hang-over pending injection that gets triggered by a following
test.

Also expand the every_nth runtime parameter so that it can take hex value
(i.e. with a leading '0x') as well as a decimal value. Now both the 'opts'
and the 'every_nth' runtime parameters can take hexadecimal values.

Link: https://lore.kernel.org/r/20200712182927.72044-2-dgilbert@interlog.comSigned-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Many SCSI HBAs support a hostwide tagset, whereby each command submitted to
the HW from all submission queues must have a unique tag identifier.

Normally this unique tag will be in the range [0, max queue], where "max
queue" is the depth of each of the submission queues.

Add support for this hostwide tag feature, via module parameter
"host_max_queue". A non-zero value means that the feature is enabled. In
this case, the submission queues are not exposed to upper layer, i.e. from
blk-mq prespective, the device has a single hw queue. There are 2 reasons
for this:

 a. It is assumed that the host can support nr_hw_queues * can_queue
    commands, but this is not true for hostwide tags

 b. For nr_hw_queues != 0, the request tag is not unique over all HW
    queues, and some HBA drivers want to use this tag for the hostwide tag

However, like many SCSI HBA drivers today - megaraid sas being an example -
the full set of HW submission queues are still used in the LLDD driver. So
instead of using a complicated "reply_map" to create a per-CPU submission
queue mapping like megaraid_sas (as it depends on a PCI device + MSIs) -
use a simple algorithm:

    hwq = cpu % queue count

If the host_max_queue param is set non-zero, then the max queue depth is
fixed at this value also.

If and when hostwide shared tags are supported in blk-mq/scsi mid-layer,
then the policy to set nr_hw_queues = 0 for hostwide tags can be revised.

Link: https://lore.kernel.org/r/1594297400-24756-3-git-send-email-john.garry@huawei.comAcked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

sdebug_max_queue should not exceed SDEBUG_CANQUEUE, otherwise crashes like
this can be triggered by passing an out-of-range value:

Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
 pstate: 20400009 (nzCv daif +PAN -UAO BTYPE=--)
 pc : schedule_resp+0x2a4/0xa70 [scsi_debug]
 lr : schedule_resp+0x52c/0xa70 [scsi_debug]
 sp : ffff800022ab36f0
 x29: ffff800022ab36f0 x28: ffff0023a935a610
 x27: ffff800008e0a648 x26: 0000000000000003
 x25: ffff0023e84f3200 x24: 00000000003d0900
 x23: 0000000000000000 x22: 0000000000000000
 x21: ffff0023be60a320 x20: ffff0023be60b538
 x19: ffff800008e13000 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000000 x10: 0000000000000000
 x9 : 0000000000000001 x8 : 0000000000000000
 x7 : 0000000000000000 x6 : 00000000000000c1
 x5 : 0000020000200000 x4 : dead0000000000ff
 x3 : 0000000000000200 x2 : 0000000000000200
 x1 : ffff800008e13d88 x0 : 0000000000000000
 Call trace:
schedule_resp+0x2a4/0xa70 [scsi_debug]
scsi_debug_queuecommand+0x2c4/0x9e0 [scsi_debug]
scsi_queue_rq+0x698/0x840
__blk_mq_try_issue_directly+0x108/0x228
blk_mq_request_issue_directly+0x58/0x98
blk_mq_try_issue_list_directly+0x5c/0xf0
blk_mq_sched_insert_requests+0x18c/0x200
blk_mq_flush_plug_list+0x11c/0x190
blk_flush_plug_list+0xdc/0x110
blk_finish_plug+0x38/0x210
blkdev_direct_IO+0x450/0x4d8
generic_file_read_iter+0x84/0x180
blkdev_read_iter+0x3c/0x50
aio_read+0xc0/0x170
io_submit_one+0x5c8/0xc98
__arm64_sys_io_submit+0x1b0/0x258
el0_svc_common.constprop.3+0x68/0x170
do_el0_svc+0x24/0x90
el0_sync_handler+0x13c/0x1a8
el0_sync+0x158/0x180
 Code: 528847e0 72a001e0 6b00003f 540018cd (3941c340)

In addition, it should not be less than 1.

So add checks for these, and fail the module init for those cases.

[mkp: changed if condition to match error message]

Link: https://lore.kernel.org/r/1594297400-24756-2-git-send-email-john.garry@huawei.com
Fixes: c4837394 ("scsi_debug: add multiple queue support")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The comment for interrupt_init_v2_hw() should not be a kerneldoc
comment. Remove it.

Link: https://lore.kernel.org/r/1594627471-235395-3-git-send-email-john.garry@huawei.comSigned-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Abort failed commands in completion path. This avoids having to wait for
block layer timeouts and triggering the SCSI error handling thread.

Link: https://lore.kernel.org/r/1594627471-235395-2-git-send-email-john.garry@huawei.comSigned-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add inline encryption support to ufs-mediatek.

The standards-compliant parts, such as querying the crypto capabilities and
enabling crypto for individual UFS requests, are already handled by
ufshcd-crypto.c, which itself is wired into the blk-crypto framework.

However MediaTek UFS host requires a vendor-specific hce_enable operation
to allow crypto-related registers being accessed normally in kernel.  After
this step, MediaTek UFS host can work as standard-compliant host for
inline-encryption related functions.

Link: https://lore.kernel.org/r/20200712003226.7593-1-stanley.chu@mediatek.comReviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The pr_fmt() at the top of the file already includes the __func__ so we can
remove the duplicative "cxgbi_conn_init_pdu:" from the string here.  Now it
all fits on one line as well.

Link: https://lore.kernel.org/r/20200713105100.GA251988@mwandaAcked-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

kmem_cache_destroy() and mempool_destroy() both correctly handle null
pointer parameters. There is no need to check if the parameter is null
before calling these functions.

Link: https://lore.kernel.org/r/1594307167-8807-1-git-send-email-xianting_tian@126.comReviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Xianting Tian <xianting_tian@126.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently pointer tdata is being dereferenced on the initialization of
pointer skb before tdata is null checked. This could lead to a potential
null pointer dereference.  Fix this by dereferencing tdata after tdata has
been null pointer sanity checked.

Link: https://lore.kernel.org/r/20200709135217.1408105-1-colin.king@canonical.com
Fixes: e33c2482 ("scsi: cxgb4i: Add support for iSCSI segmentation offload")
Addresses-Coverity: ("Dereference before null check")
Acked-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Gcc reports warning as follows:

drivers/target/target_core_pr.c:1162:26: warning:
 variable 'tpg' set but not used [-Wunused-but-set-variable]
 1162 |  struct se_portal_group *tpg;
      |                          ^~~

After commit 63c9ffe4 ("scsi: target: Check enforce_pr_isids during
registration"), 'tpg' is never used. Remove it to avoid build warning.

Link: https://lore.kernel.org/r/20200709114636.69256-1-weiyongjun1@huawei.comReported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add missing setup_xfer_req() call in ufshcd_issue_devman_upiu_cmd() in
ufs-bsg path. Relocate existing setup_xfer_req() calls to a common place,
i.e., ufshcd_send_command(), to simplify the driver.

Link: https://lore.kernel.org/r/20200706060707.32608-3-stanley.chu@mediatek.comAcked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Simplify recording command completion time in __ufshcd_transfer_req_compl()
by assigning lrbp->compl_time_stamp in a unified location.

Link: https://lore.kernel.org/r/20200706060707.32608-2-stanley.chu@mediatek.comAcked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Firmware does tx flow control so remove tx flow control code from the
driver.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Current code does not check connection state before issuing
header/data digest offload and DDP page size setup hardware command.

Add a connection state check to issue hardware command only
if connection is in established state.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

T5/T6 adapters support iSCSI segmentation offload.

To transmit iSCSI PDUs using ISO driver provides iSCSI header and data
scatterlist to the adapter, adapter forms multiple iSCSI PDUs and transmits
them.

[mkp: checkpatch]

Link: https://lore.kernel.org/r/1593448871-2972-1-git-send-email-varun@chelsio.comSigned-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

For additional robustness in the face of Hyper-V errors or malicious
behavior, validate all values that originate from packets that Hyper-V has
sent to the guest. Ensure that invalid values cannot cause data being
copied out of the bounds of the source buffer when calling memcpy. Ensure
that outgoing packets do not have any leftover guest memory that has not
been zeroed out.

Link: https://lore.kernel.org/r/20200706160928.53049-1-lkmlabelt@gmail.com
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andres Beltran <lkmlabelt@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Drop the doubled word "be".

Link: https://lore.kernel.org/r/20200707180414.10467-18-rdunlap@infradead.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The expression start_idx - dbg_cnt is evaluated using unsigned int
arthithmetic (since these variables are unsigned ints) and hence can never
be less than zero, so the less than comparison is never true.  Rewrite the
expression to check for start_idx being less than dbg_cnt.

After the logic was corrected, temp_idx wasn't working correctly. So fix it
as well.

Link: https://lore.kernel.org/r/20200706204246.130416-1-jsmart2021@gmail.com
Fixes: 372c187b ("scsi: lpfc: Add an internal trace log buffer")
CC: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unsigned compared against 0")

With certain platforms its possible pci_alloc_irq_vectors() may affinitize
irq vectors to multiple (all?) CPUs. The driver is currently assuming
exclusivity and vectors being doled out to different CPUs and is assigning
primary ownership of each vector to the first CPU in the mask.  The code
doesn't bother to check if the CPU already owns a vector and will
unconditionally overwrite the CPU to vector mapping. This causes the
relationships between eq's and cq's to get confused and gets worse when
CPUs start to offline. The net results are interrupts are skipped resulting
in mailbox timeouts and there are oopses in CPU offling flows.

Fix this changing up the primary vector assignment. Now assign the eq to a
CPU only if it is the CPU in the mask that does not have a prior
assignment. And once the primary ownership is assigned, break from the
loop. For CPUs that may have been set before but not the primary owner, the
lpfc_cpu_affinity_check() routine will balance the CPU to eq assignment.

Link: https://lore.kernel.org/r/20200706204230.130363-1-jsmart2021@gmail.comSigned-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Wire up ufshcd.c with the UFS Crypto API, the block layer inline encryption
additions and the keyslot manager.

Many existing inline crypto devices require some additional behaviour not
specified in the UFSHCI v2.1 specification - as such the vendor specific
drivers will need to be updated where necessary to make it possible to use
those devices. Some of these changes have already been proposed upstream,
such as for the Qualcomm 845 SoC at
https://lkml.kernel.org/linux-scsi/20200501045111.665881-1-ebiggers@kernel.org/
and for ufs-mediatek at
https://lkml.kernel.org/linux-scsi/20200304022101.14165-1-stanley.chu@mediatek.com/

This patch has been tested on the db845c, sm8150-mtp and sm8250-mtp
(which have Qualcomm chipsets) and on some mediatek chipsets using these
aforementioned vendor specific driver updates.

Link: https://lore.kernel.org/r/20200706200414.2027450-4-satyat@google.comReviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Introduce functions to manipulate UFS inline encryption hardware in line
with the JEDEC UFSHCI v2.1 specification and to work with the block keyslot
manager.

The UFS crypto API will assume by default that a vendor driver doesn't
support UFS crypto, even if the hardware advertises the capability, because
a lot of hardware requires some special handling that's not specified in
the aforementioned JEDEC spec. Each vendor driver must explicitly set
hba->caps |= UFSHCD_CAP_CRYPTO before ufshcd_hba_init_crypto_capabilities()
is called to opt-in to UFS crypto support.

Link: https://lore.kernel.org/r/20200706200414.2027450-3-satyat@google.comReviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add the crypto registers and structs defined in v2.1 of the JEDEC UFSHCI
specification in preparation to add support for inline encryption to UFS.

Link: https://lore.kernel.org/r/20200706200414.2027450-2-satyat@google.comReviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix smatch warning:

    drivers/scsi/lpfc/lpfc_sli.c:15156 lpfc_cq_poll_hdler() warn:
    inconsistent indenting

Link: https://lore.kernel.org/r/20200707150018.823350-1-colin.king@canonical.comReviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/libfc/fc_disc.c:343: warning: Function parameter or member 'disc' not described in 'fc_disc_gpn_ft_req'
 drivers/scsi/libfc/fc_disc.c:343: warning: Excess function parameter 'lport' description in 'fc_disc_gpn_ft_req'
 drivers/scsi/libfc/fc_disc.c:380: warning: Function parameter or member 'disc' not described in 'fc_disc_gpn_ft_parse'
 drivers/scsi/libfc/fc_disc.c:380: warning: Excess function parameter 'lport' description in 'fc_disc_gpn_ft_parse'
 drivers/scsi/libfc/fc_disc.c:498: warning: Function parameter or member 'disc_arg' not described in 'fc_disc_gpn_ft_resp'
 drivers/scsi/libfc/fc_disc.c:498: warning: Excess function parameter 'lp_arg' description in 'fc_disc_gpn_ft_resp'

Link: https://lore.kernel.org/r/20200707140055.2956235-10-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

There is no need to populate an unused variable, even if the read is
required.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_cs_message’:
 drivers/scsi/pcmcia/nsp_cs.c:143:2: warning: function ‘nsp_cs_message’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
 drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_fifo_count’:
 drivers/scsi/pcmcia/nsp_cs.c:692:24: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200707140055.2956235-9-lee.jones@linaro.org
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_cs_message’:
 drivers/scsi/pcmcia/nsp_cs.c:143:2: warning: function ‘nsp_cs_message’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
 drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_fifo_count’:
 drivers/scsi/pcmcia/nsp_cs.c:692:24: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200707140055.2956235-8-lee.jones@linaro.org
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Looks to be unused since 2014.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aha152x.c: In function ‘datai_run’:
 drivers/scsi/aha152x.c:2033:9: warning: variable ‘data’ set but not used [-Wunused-but-set-variable]
 2033 | int data;
 | ^~~~

Link: https://lore.kernel.org/r/20200707140055.2956235-7-lee.jones@linaro.org
Cc: "Juergen E. Fischer" <fischer@norbit.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>