All of the SCSI transport classes are suddenly spitting lockdep
warnings.  According to Eric Biderman this is because lockdep needs
static initialisers and the attribute container way of doing things
end up with dynamic sysfs attributes.  Fix this by calling
sysfs_attr_init which sets the lockdep key correctly.
Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

On newer kernels users of advansys module are reporting system hang when
trying to load it without firmware files present. After looking closely
at description on https://qa.mandriva.com/show_bug.cgi?id=53220, I think
this is related to commit "[SCSI] advansys: use request_firmware". The
problem is that after switch to request_firmware, asc_dvc->err_code
isn't being set when firmware files aren't found or loading fails.

err_code is used by the driver to judge if there was a fatal error or
not, as can be seen for example on advansys_board_found, which will only
return -ENODEV when err_code is set. Because err_code isn't being set
when request_firmware fails, this is a change of behaviour of the code
before request_firmware addition, making it continue to load and it
fails later as the firmware wasn't really loaded.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

The fix prevents application path from sending get-firmware-state mbx command
during as isp reset.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

On specific platforms, MSI is unreliable on some of the QLA24xx chips, resulting
in fatal I/O errors under load, as reported in <http://bugs.debian.org/572322>
and by some RHEL customers.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

[SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not enabled at the same time.

The logic is changed to detect this condition based on following
1) both module parameters are off (ql2xmaxqueues and ql2xmultique_tag).
2) both module parameters are on (ql2xmaxqueues and ql2xmultique_tag).
3) The HBA does not support multi queue.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Checks should only be done for NPIV-capable ISPs.  Original code
could result in PORT_UPDATEs being missed on non-NPIV-capable
ISPs.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

We now enable/disable "Additional Receive Credits" in f/w based on nvram
parameter "Extended_BB_Credits" bit (i.e. Enhanced-Features: at offset 0x196).
This is applicable only for GEN2 CNAs.
Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

blk_end_request doesn't complete a bidi request
successfully

The unfinished request eventually triggers a panic in
timeout handling routine fc_bsg_job_timeout as
req->special is NULL

Use blk_end_request_all to end the request unconditionally
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Acked-by: James Smart  <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

We could be failing/stopping a connection due to libiscsi starting
recovery/cleanup, but the xmit path or scsi eh thread path
could be dropping the connection at the same time.

As a result the session->state gets set to failed instead of in
recovery. We end up not blocking the session
and so the replacement timeout never gets started and we only end up
failing the IO when scsi_softirq_done sees that the
cmd has been running for (cmd->allowed + 1) * rq->timeout secs.

We used to fail the IO right away so users are seeing a long
delay when using dm-multipath. This problem was added in
2.6.28.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1
  x86/PCI: for host bridge address space collisions, show conflicting resource
  frv/PCI: remove redundant warnings
  x86/PCI: remove redundant warnings
  PCI: don't say we claimed a resource if we failed
  PCI quirk: Disable MSI on VIA K8T890 systems
  PCI quirk: RS780/RS880: work around missing MSI initialization
  PCI quirk: only apply CX700 PCI bus parking quirk if external VT6212L is present
  PCI: complain about devices that seem to be broken
  PCI: print resources consistently with %pR
  PCI: make disabled window printk style match the enabled ones
  PCI: break out primary/secondary/subordinate for readability
  PCI: for address space collisions, show conflicting resource
  resources: add interfaces that return conflict information
  PCI: cleanup error return for pcix get and set mmrbc functions
  PCI: fix access of PCI_X_CMD by pcix get and set mmrbc functions
  PCI: kill off pci_register_set_vga_state() symbol export.
  PCI: fix return value from pcix_get_max_mmrbc()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix imperfect completion wait in nilfs_wait_on_logs
  nilfs2: fix hang-up of cleaner after log writer returned with error
  nilfs2: fix duplicate call to nilfs_segctor_cancel_freev

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: use dev_pm_ops for class pcmcia_socket_class
  power: support _noirq actions on device types and classes
  pcmcia: allow for four multifunction subdevices (again)
  pcmcia: do not use ioports < 0x100 on x86
  pd6729: Coding Style fixes

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, amd: Restrict usage of c1e_idle()
  x86: Fix placement of FIX_OHCI1394_BASE
  x86: Handle legacy PIC interrupts on all the cpu's

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  time: Fix accumulation bug triggered by long delay.
  posix-cpu-timers: Reset expire cache when no timer is running
  timer stats: Fix del_timer_sync() and try_to_del_timer_sync()
  clockevents: Sanitize min_delta_ns adjustment and prevent overflows

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ring-buffer: Do 8 byte alignment for 64 bit that can not handle 4 byte align

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Use proper type in sched_getaffinity()
  kernel/sched.c: Suppress unused var warning
  sched: sched_getaffinity(): Allow less than NR_CPUS length

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  powerpc/perf_events: Fix call-graph recording, add perf_arch_fetch_caller_regs
  perf top: Add missing initialization to zero
  perf probe: Use original address instead of CU-based address
  perf probe: Fix offset to allow signed value
  perf top: Improve the autosizing of column lenghts
  perf probe: Fix need_dwarf flag if lazy matching is used
  perf probe: Fix probe_point buffer overrun

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Move two IRQ functions from .init.text to .text
  genirq: Protect access to irq_desc->action in can_request_irq()
  genirq: Prevent oneshot irq thread race

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Remove excessive early_res debug output
  softlockup: Stop spurious softlockup messages due to overflow
  rcu: Fix local_irq_disable() CONFIG_PROVE_RCU=y false positives
  rcu: Fix tracepoints & lockdep false positive
  rcu: Make rcu_read_lock_bh_held() allow for disabled BH

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: core: align driver match with modalias
  firewire: core: fix Model_ID in modalias
  firewire: ohci: add cycle timer quirk for the TI TSB12LV22
  firewire: core: fw_iso_resource_manage: fix error handling

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Restore LOOKUP_DIRECTORY hint handling in final lookup on open()

	Lose want_dir argument, while we are at it - since now
nd->flags & LOOKUP_DIRECTORY is equivalent to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Fix __get_user_pages() to make it pin the last page on a buffer that doesn't
begin at the start of a page, but is a multiple of PAGE_SIZE in size.

The problem is that __get_user_pages() advances the pointer too much when it
iterates to the next page if the page it's currently looking at isn't used from
the first byte.  This can cause the end of a short VMA to be reached
prematurely, resulting in the last page being lost.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert the following patch:

	commit c08c6e1f
	Author: Steven J. Magnani <steve@digidescorp.com>
	Date:   Fri Mar 5 13:42:24 2010 -0800

	nommu: get_user_pages(): pin last page on non-page-aligned start

As it assumes that the mappings begin at the start of pages - something that
isn't necessarily true on NOMMU systems.  On NOMMU systems, it is possible for
a mapping to only occupy part of the page, and not necessarily touch either end
of it; in fact it's also possible for multiple non-overlapping mappings to
coexist on one page (consider direct mappings of ROMFS files, for example).
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Fixed inode allocator to correctly track a flex_bg's used_dirs
  ext4: Don't use delayed allocation by default when used instead of ext3
  ext4: Fix spelling of CONTIG_FS_EXT3 to CONFIG_FS_EXT3
  ext4: Fix estimate of # of blocks needed to write indirect-mapped files

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
  TIPC: Removed inactive maintainer
  isdn: Cleanup Sections in PCMCIA driver elsa
  isdn: Cleanup Sections in PCMCIA driver avma1
  isdn: Cleanup Sections in PCMCIA driver teles
  isdn: Cleanup Sections in PCMCIA driver sedlbauer
  via-velocity: Fix FLOW_CNTL_TX_RX handling in set_mii_flow_control()
  netfilter: xt_hashlimit: IPV6 bugfix
  netfilter: ip6table_raw: fix table priority
  netfilter: xt_hashlimit: dl_seq_stop() fix
  af_key: return error if pfkey_xfrm_policy2msg_prep() fails
  skbuff: remove unused dma_head & dma_maps fields
  vlan: updates vlan real_num_tx_queues
  vlan: adds vlan_dev_select_queue
  igb: only use vlan_gro_receive if vlans are registered
  igb: do not modify tx_queue_len on link speed change
  igb: count Rx FIFO errors correctly
  bnx2: Use proper handler during netpoll.
  bnx2: Fix netpoll crash.
  ksz884x: fix return value of netdev_set_eeprom
  cgroups: net_cls as module
  ...

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Compiling this driver gave a section mismatch,
so I reviewed the init/exit paths of the driver
and made the correct changes.

WARNING: drivers/isdn/hisax/built-in.o(.text+0x55e37): Section mismatch
in reference from the function elsa_cs_config() to the function
.devinit.text:hisax_init_pcmcia()
The function elsa_cs_config() references
the function __devinit hisax_init_pcmcia().
This is often because elsa_cs_config lacks a __devinit
annotation or the annotation of hisax_init_pcmcia is wrong.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Acked-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Compiling this driver gave a section mismatch,
so I reviewed the init/exit paths of the driver
and made the correct changes.

WARNING: drivers/isdn/hisax/built-in.o(.text+0x56512): Section mismatch
in reference from the function avma1cs_config() to the function
.devinit.text:hisax_init_pcmcia()
The function avma1cs_config() references
the function __devinit hisax_init_pcmcia().
This is often because avma1cs_config lacks a __devinit
annotation or the annotation of hisax_init_pcmcia is wrong.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Acked-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Compiling this driver gave a section mismatch,
so I reviewed the init/exit paths of the driver
and made the correct changes.

WARNING: drivers/isdn/hisax/built-in.o(.text+0x56bfb): Section mismatch
in reference from the function teles_cs_config() to the function
.devinit.text:hisax_init_pcmcia()
The function teles_cs_config() references
the function __devinit hisax_init_pcmcia().
This is often because teles_cs_config lacks a __devinit
annotation or the annotation of hisax_init_pcmcia is wrong.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Acked-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Compiling this driver gave a section mismatch,
so I reviewed the init/exit paths of the driver
and made the correct changes.

WARNING: drivers/isdn/hisax/built-in.o(.text+0x558d6): Section mismatch
in reference from the function sedlbauer_config() to the function
.devinit.text:hisax_init_pcmcia()
The function sedlbauer_config() references
the function __devinit hisax_init_pcmcia().
This is often because sedlbauer_config lacks a __devinit
annotation or the annotation of hisax_init_pcmcia is wrong.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Acked-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clear, don't set, ANAR_ASMDIR in this case.

Noticed by Roel Kluin.
Signed-off-by: David S. Miller <davem@davemloft.net>

Yanko's GA-MA78GM-S2H (BIOS F11) reports the following resource in a PCI
host bridge _CRS:

    [07] 32-Bit DWORD Address Space Resource
         Min Relocatability : MinFixed
         Max Relocatability : MaxFixed
            Address Minimum : CFF00000  (_MIN)
            Address Maximum : FEBFFFFF  (_MAX)
             Address Length : 3EE10000  (_LEN)

This is invalid per spec (ACPI 4.0, 6.4.3.5) because it's a fixed size,
fixed location descriptor, but _LEN != _MAX - _MIN + 1.

Based on https://bugzilla.kernel.org/show_bug.cgi?id=15480#c15, I think
Windows handles this by truncating the window so it fits between _MIN and
_MAX.  I also verified this by modifying the SeaBIOS DSDT and booting
Windows 2008 R2 with qemu.

This patch makes Linux truncate the window, too, which fixes:
    http://bugzilla.kernel.org/show_bug.cgi?id=15480Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Tested-by: Yanko Kaneti <yaneti@declera.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

With insert_resource_conflict(), we can learn what the actual conflict is,
so print that info for debugging purposes.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

A missing break statement in hashlimit_ipv6_mask(), and masks
between /64 and /95 are not working at all...
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>

pci_claim_resource() already prints more detailed error messages, so these
are really redundant.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

pci_claim_resource() already prints more detailed error messages, so these
are really redundant.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

pci_claim_resource() can fail, so pay attention and only claim success
when it actually succeeded.  If pci_claim_resource() fails, it prints a
useful diagnostic.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>