- 02 Jan, 2024 32 commits
-
-
Shinas Rasheed authored
Add driver framework and device setup and initialization for Octeon PCI Endpoint NIC VF. Add implementation to load module, initialize, register network device, cleanup and unload module. Signed-off-by:
Shinas Rasheed <srasheed@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geoff Levand authored
In an effort to make the PS3 gelic driver easier to maintain, create two new structures, struct gelic_hw_regs and struct gelic_chain_link, and replace the corresponding members of struct gelic_descr with the new structures. The new struct gelic_hw_regs holds the register variables used by the gelic hardware device. The new struct gelic_chain_link holds variables used to manage the driver's linked list of gelic descr structures. Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Add basic ntuple filter support The current driver only supports ntuple filters added by aRFS. This patch series adds basic support for user defined TCP/UDP ntuple filters added by the user using ethtool. Many of the patches are refactoring patches to make the existing code more general to support both aRFS and user defined filters. aRFS filters always have the Toeplitz hash value from the NIC. A Toepliz hash function is added in patch 5 to get the same hash value for user defined filters. The hash is used to store all ntuple filters in the table and all filters must be hashed identically using the same function and key. v2: Fix compile error in patch #4 when CONFIG_BNXT_SRIOV is disabled. ==================== Signed-off-by: -
Michael Chan authored
Add logic to delete a user specified ntuple filter from ethtool. Reviewed-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
Add support for adding user defined ntuple TCP/UDP filters. These filters are similar to aRFS filters except that they don't get aged. Source IP, destination IP, source port, or destination port can be unspecifed as wildcard. At least one of these tuples must be specifed. If a tuple is specified, the full mask must be specified. All ntuple related ethtool functions are now no longer compiled only for CONFIG_RFS_ACCEL. Reviewed-by:
-
Michael Chan authored
aRFS filters match all 5 tuples. User defined ntuple filters may specify some of the tuples as wildcards. To support that, we add the ntuple_flags to the bnxt_ntuple_filter struct to specify which tuple fields are to be matched. The matching tuple fields will then be passed to the firmware in bnxt_hwrm_cfa_ntuple_filter_alloc() to create the proper filter. Reviewed-by:
-
Michael Chan authored
Refactor the logic into a new function bnxt_del_ntp_filters(). The same call will be used when the user deletes an ntuple filter. The bnxt_hwrm_cfa_ntuple_filter_free() function to call fw to free the ntuple filter is exported so that the ethtool logic can call it. Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Michael Chan authored
Generalize the ethtool logic that walks the ntuple hash table now that we have the common bnxt_filter_base structure. This will allow the code to easily extend to cover user defined ntuple or ether filters. Reviewed-by:
-
Michael Chan authored
Add a new function bnxt_insert_ntp_filter() to insert the ntuple filter into the hash table and other basic setup. We'll use this function to insert a user defined filter from ethtool. Also, export bnxt_lookup_ntp_filter_from_idx() and bnxt_get_ntp_filter_idx() for similar purposes. All ntuple related functions are now no longer compiled only for CONFIG_RFS_ACCEL Reviewed-by:
-
Michael Chan authored
Change the unused flag to BNXT_FLTR_INSERTED. To prepare for multiple pathways that an ntuple filter can be deleted, we add this flag. These filter structures can be retreived from the RCU hash table but only the caller that sees that the BNXT_FLTR_INSERTED flag is set can delete the filter structure and clear the flag under spinlock. Reviewed-by:
-
Michael Chan authored
Add the helper function to look up the ntuple filter from the hash index and use it in bnxt_rx_flow_steer(). The helper function will also be used by user defined ntuple filters in the next patches. Reviewed-by:
-
Pavan Chebbi authored
For ntuple filters added by aRFS, the Toeplitz hash calculated by our NIC is available and is used to store the ntuple filter for quick retrieval. In the next patches, user defined ntuple filter support will be added and we need to calculate the same hash for these filters. The same hash function needs to be used so we can detect duplicates. Add the function bnxt_toeplitz() to calculate the Toeplitz hash for user defined ntuple filters. bnxt_toeplitz() uses the same Toeplitz key and the same key length as the NIC. bnxt_get_ntp_filter_idx() is added to return the hash index. For aRFS, the hash comes from the NIC. For user defined ntuple, we call bnxt_toeplitz() to calculate the hash index. Reviewed-by:
-
Michael Chan authored
Refactor the L2 filter alloc/free logic so that these filters can be added/deleted by the user. The bp->ntp_fltr_bmap allocated size is also increased to allow enough IDs for L2 filters. Reviewed-by:
-
Michael Chan authored
With the new bnxt_l2_filter structure, we can now re-structure the bnxt_ntuple_filter structure to point to the bnxt_l2_filter structure. We eliminate the L2 ether address info from the ntuple filter structure as we can get the information from the L2 filter structure. Note that the source L2 MAC address is no longer used. Reviewed-by:
-
Michael Chan authored
The current driver only has an array of 4 additional L2 unicast addresses to support the netdev uc address list. Generalize and expand this infrastructure with an L2 address hash table so we can support an expanded list of unicast addresses (for bridges, macvlans, OVS, etc). The L2 hash table infrastructure will also allow more generalized n-tuple filter support. This patch creates the bnxt_l2_filter structure and the hash table. This L2 filter structure has the same bnxt_filter_base structure as used in the bnxt_ntuple_filter structure. All currently supported L2 filters will now have an entry in this new table. Note that L2 filters may be created for the VF. VF filters should not be freed when the PF goes down. Add some logic in bnxt_free_l2_filters() to allow keeping the VF filters or to free everything during rmmod. Reviewed-by:
-
Michael Chan authored
This is in preparation to support user defined L2 (ether) filters, which will have many similarities with ntuple filters. Refactor bnxt_ntuple_filter structure to have a bnxt_filter_base structure that can be re-used by the L2 filters. Reviewed-by:
-
David S. Miller authored
Merge tag 'for-net-next-2023-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btnxpuart: Fix recv_buf return value - L2CAP: Fix responding with multiple rejects - Fix atomicity violation in {min,max}_key_size_set - ISO: Allow binding a PA sync socket - ISO: Reassociate a socket with an active BIS - ISO: Avoid creating child socket if PA sync is terminating - Add device 13d3:3572 IMC Networks Bluetooth Radio - Don't suspend when there are connections - Remove le_restart_scan work - Fix bogus check for re-auth not supported with non-ssp - lib: Add documentation to exported functions - Support HFP offload for QCA2066 ==================== Signed-off-by:
-
Vegard Nossum authored
Commit f061c9f7 ("Documentation: Document each netlink family") added a new Python script that is invoked during 'make htmldocs' and which reads the netlink YAML spec files. Using the virtualenv from scripts/sphinx-pre-install, we get this new error wen running 'make htmldocs': Traceback (most recent call last): File "./tools/net/ynl/ynl-gen-rst.py", line 26, in <module> import yaml ModuleNotFoundError: No module named 'yaml' make[2]: *** [Documentation/Makefile:112: Documentation/networking/netlink_spec/rt_link.rst] Error 1 make[1]: *** [Makefile:1708: htmldocs] Error 2 Fix this by adding 'pyyaml' to requirements.txt. Note: This was somehow present in the original patch submission: <https://lore.kernel.org/all/20231103135622.250314-1-leitao@debian.org/> I'm not sure why the pyyaml requirement disappeared in the meantime. Fixes: f061c9f7 ("Documentation: Document each netlink family") Cc: Breno Leitao <leitao@debian.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by:
-
David S. Miller authored
Matthieu Baerts says: ==================== mptcp: add CurrEstab MIB counter This MIB counter is similar to the one of TCP -- CurrEstab -- available in /proc/net/snmp. This is useful to quickly list the number of MPTCP connections without having to iterate over all of them. Patch 1 prepares its support by adding new helper functions: - MPTCP_DEC_STATS(): similar to MPTCP_INC_STATS(), but this time to decrement a counter. - mptcp_set_state(): similar to tcp_set_state(), to change the state of an MPTCP socket, and to inc/decrement the new counter when needed. Patch 2 uses mptcp_set_state() instead of directly calling inet_sk_state_store() to change the state of MPTCP sockets. Patch 3 and 4 validate the new feature in MPTCP "join" and "diag" selftests. ==================== Signed-off-by:
Matthieu Baerts <matttbe@kernel.org> Signed-off-by:
-
Geliang Tang authored
This patch adds a new helper chk_msk_cestab() to check the current established connections counter MIB_CURRESTAB in diag.sh. Invoke it to check the counter during the connection after every chk_msk_inuse(). Signed-off-by:
Geliang Tang <geliang.tang@linux.dev> Reviewed-by:
-
Geliang Tang authored
This patch adds a new helper chk_cestab_nr() to check the current established connections counter MIB_CURRESTAB. Set the newly added variables cestab_ns1 and cestab_ns2 to indicate how many connections are expected in ns1 or ns2. Invoke check_cestab() to check the counter during the connection in do_transfer() and invoke chk_cestab_nr() to re-check it when the connection closed. These checks are embedded in add_tests(). Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Geliang Tang authored
This patch replaces all the 'inet_sk_state_store()' calls under net/mptcp with the new helper mptcp_set_state(). Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/460Signed-off-by:
-
Geliang Tang authored
Add a new MIB counter named MPTCP_MIB_CURRESTAB to count current established MPTCP connections, similar to TCP_MIB_CURRESTAB. This is useful to quickly list the number of MPTCP connections without having to iterate over all of them. This patch adds a new helper function mptcp_set_state(): if the state switches from or to ESTABLISHED state, this newly added counter is incremented. This helper is going to be used in the following patch. Similar to MPTCP_INC_STATS(), a new helper called MPTCP_DEC_STATS() is also needed to decrement a MIB counter. Signed-off-by:
-
David S. Miller authored
Dmitry Safonov says: ==================== selftest/net: Some more TCP-AO selftest post-merge fixups Note that there's another post-merge fix for TCP-AO selftests, but that doesn't conflict with these, so I don't resend that: https://lore.kernel.org/all/20231219-b4-tcp-ao-selftests-out-of-tree-v1-1-0fff92d26eac@arista.com/T/#u ==================== Tested-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Dmitry Safonov <dima@arista.com>
-
Dmitry Safonov authored
Since commit f5769fae ("net: Namespace-ify sysctl_optmem_max") optmem_max is per-netns, so need of switching to root namespace. It seems trivial to keep the old logic working, so going to keep it for a while (at least, until kernel with netns-optmem_max will be release). Currently, there is a test that checks that optmem_max limit applies to TCP-AO keys and a little benchmark that measures linked-list TCP-AO keys scaling, those are fixed by this. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Dmitry Safonov authored
In unsigned-md5 selftests ip_route_add() is not needed in client_add_ip(): the route was pre-setup in __test_init() => link_init() for subnet, rather than a specific ip-address. Currently, __ip_route_add() mistakenly always sets VRF table to RT_TABLE_MAIN - this seems to have sneaked in during unsigned-md5 tests debugging. That also explains, why ip_route_add_vrf() ignored EEXIST, returned by fib6. Yet, keep EEXIST ignoring in bench-lookups selftests as it's expected that those selftests may add the same (duplicate) routes. Reported-by:
-
David S. Miller authored
Merge tag 'wireless-next-2023-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.8 The third "new features" pull request for v6.8. This is a smaller one to clear up our tree before the break and nothing really noteworthy this time. Major changes: stack * cfg80211: introduce cfg80211_ssid_eq() for SSID matching * cfg80211: support P2P operation on DFS channels * mac80211: allow 64-bit radiotap timestamps iwlwifi * AX210: allow concurrent P2P operation on DFS channels ==================== Signed-off-by:
-
David S. Miller authored
Jamal Hadi Salim says: ==================== net/sched: retire tc ipt action In keeping up with my status as a hero who removes code: another one bites the dust. The tc ipt action was intended to run all netfilter/iptables target. Unfortunately it has not benefitted over the years from proper updates when netfilter changes, and for that reason it has remained rudimentary. Pinging a bunch of people that i was aware were using this indicates that removing it wont affect them. Retire it to reduce maintenance efforts. So Long, ipt, and Thanks for all the Fish. ==================== Acked-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Jamal Hadi Salim authored
Now that we are retiring the IPT action. Reviewed-by:
Victor Noguiera <victor@mojatatu.com> Reviewed-by:
Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Jamal Hadi Salim authored
The tc ipt action was intended to run all netfilter/iptables target. Unfortunately it has not benefitted over the years from proper updates when netfilter changes, and for that reason it has remained rudimentary. Pinging a bunch of people that i was aware were using this indicates that removing it wont affect them. Retire it to reduce maintenance efforts. Buh-bye. Reviewed-by:
-
Eric Dumazet authored
dev->gso_partial_features is read from tx fast path for GSO packets. Move it to appropriate section to avoid a cache line miss. Fixes: 43a71cd6 ("net-device: reorganize net_device fast path variables") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by:
-
Andy Shevchenko authored
There is no need to have an intermediate functions as DEFINE_RES_*() macros are represented by compound literals. Just use them in place. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by:
-
- 01 Jan, 2024 8 commits
-
-
David S. Miller authored
Maxime Chevallier says: ==================== Introduce PHY listing and link_topology tracking Here's a V5 of the multi-PHY support series. At a glance, besides some minor fixes and R'd-by from Andrew, one of the thing this series does is remove the ASSERT_RTNL() from the topo_add_phy/del_phy operations. These operations will take a PHY device and put it into the list of devices associated to a netdevice. The main thing to protect here is the list itself, but since we use xarrays, my naive understanding of it is that it contains its own protection scheme. There shouldn't be a need for more locking, as the insertion/deletion paths are already hooked into the PHY connection to a netdev, or disconnection from it. Now for the rest of the cover : As a remainder, this ongoing work aims ultimately at supporting complex link topologies that involve multiplexing multiple PHYs/SFPs on a single netdevice. As a first step, it's required that we are able to enumerate the PHYs on a given ethernet interface. By just doing so, we also improve already-existing use-cases, namely the copper SFP modules support when a media-converter is used (as we have 2 PHYs on the link, but only one is referenced by net_device.phydev, which is used on a variety of netlink commands). The series is architectured as follows : - The first patch adds the notion of phy_link_topology, which tracks all PHYs attached to a netdevice. - Patches 2, 3 and 4 adds some plumbing into SFP and phylib to be able to connect the dots when building the topology tree, to know which PHY is connected to which SFP bus, trying not to be too invasive on phylib. - Patch 5 allows passing a PHY_INDEX to ethnl commands. I'm uncertain about this, as there are at least 4 netlink commands ( 5 with the one introduced in patch 7 ) that targets PHYs directly or indirectly, which to me makes it worth-it to have a generic way to pass a PHY index to commands, however the approach taken may be too generic. - Patch 6 is the netlink spec update + ethtool-user.c|h autogenerated code update (the autogenerated code triggers checkpatch warning though) - Patch 7 introduces a new netlink command set to list PHYs on a netdevice. It implements a custom DUMP and GET operation to allow filtered dumps, that lists all PHYs on a given netdevice. I couldn't use most of ethnl's plumbing though. - Patch 8 is the netlink spec update + ethtool-user.c|h update for that new command - Patch 8,9,10 and 11 updates the PLCA, strset, cable-test and pse netlink commands to use the user-provided PHY instead of net_device.phydev. - Finally patch 12 adds some documentation for this whole work. Examples ======== Here's a short overview of the kind of operations you can have regarding the PHY topology. These tests were performed on a MacchiatoBin, which has 3 interfaces : eth0 and eth1 have the following layout: MAC - PHY - SFP eth2 has this more classic topology : MAC - PHY - RJ45 finally eth3 has the following topology : MAC - SFP When performing a dump with all interfaces down, we don't get any result, as no PHY has been attached to their respective net_device : None The following output is with eth0, eth2 and eth3 up, but no SFP module inserted in none of the interfaces : [{'downstream-sfp-name': 'sfp-eth0', 'drvname': 'mv88x3310', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 0, 'index': 1, 'name': 'f212a600.mdio-mii:00', 'upstream-type': 'mac'}, {'drvname': 'Marvell 88E1510', 'header': {'dev-index': 4, 'dev-name': 'eth2'}, 'id': 21040593, 'index': 1, 'name': 'f212a200.mdio-mii:00', 'upstream-type': 'mac'}] And now is a dump operation with a copper SFP in the eth0 port : [{'downstream-sfp-name': 'sfp-eth0', 'drvname': 'mv88x3310', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 0, 'index': 1, 'name': 'f212a600.mdio-mii:00', 'upstream-type': 'mac'}, {'drvname': 'Marvell 88E1111', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 21040322, 'index': 2, 'name': 'i2c:sfp-eth0:16', 'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'}, 'upstream-type': 'phy'}, {'drvname': 'Marvell 88E1510', 'header': {'dev-index': 4, 'dev-name': 'eth2'}, 'id': 21040593, 'index': 1, 'name': 'f212a200.mdio-mii:00', 'upstream-type': 'mac'}] -- Note that this shouldn't actually work as the 88x3310 PHY doesn't allow a 1G SFP to be connected to its SFP interface, and I don't have a 10G copper SFP, so for the sake of the demo I applied the following modification, which of courses gives a non-functionnal link, but the PHY attach still works, which is what I want to demonstrate : @@ -488,7 +488,7 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) if (iface != PHY_INTERFACE_MODE_10GBASER) { dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); - return -EINVAL; + //return -EINVAL; } return 0; } Finally an example of the filtered DUMP operation that Jakub suggested in V1 : [{'downstream-sfp-name': 'sfp-eth0', 'drvname': 'mv88x3310', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 0, 'index': 1, 'name': 'f212a600.mdio-mii:00', 'upstream-type': 'mac'}, {'drvname': 'Marvell 88E1111', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 21040322, 'index': 2, 'name': 'i2c:sfp-eth0:16', 'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'}, 'upstream-type': 'phy'}] And a classic GET operation allows querying a single PHY's info : {'drvname': 'Marvell 88E1111', 'header': {'dev-index': 2, 'dev-name': 'eth0'}, 'id': 21040322, 'index': 2, 'name': 'i2c:sfp-eth0:16', 'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'}, 'upstream-type': 'phy'} Changed in V5: - Removed the RTNL assertion in the topology ops - Made the phy_topo_get_phy inline - Fixed the PSE-PD multi-PHY support by re-adding a wrongly dropped check - Fixed some typos in the documentation - Fixed reverse xmas trees Changes in V4: - Dropped the RFC flag - Made the net_device integration independent to having phylib enabled - Removed the autogenerated ethtool-user code for the YNL specs Changes in V3: - Added RTNL assertions where needed - Fixed issues in the DUMP code for PHY_GET, which crashed when running it twice in a row - Added the documentation, and moved in-source docs around - renamed link_topology to phy_link_topology Changes in V2: - Added the DUMP operation - Added much more information in the reported data, to be able to reconstruct precisely the topology tree - renamed phy_list to link_topology ==================== Signed-off-by: -
Maxime Chevallier authored
The newly introduced phy_link_topology tracks all ethernet PHYs that are attached to a netdevice. Document the base principle, internal and external APIs. As the phy_link_topology is expected to be extended, this documentation will hold any further improvements and additions made relative to topology handling. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Maxime Chevallier authored
The ETH_SS_PHY_STATS command gets PHY statistics. Use the phydev pointer from the ethnl request to allow query phy stats from each PHY on the link. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Maxime Chevallier authored
Cable testing is a PHY-specific command. Instead of targeting the command towards dev->phydev, use the request to pick the targeted PHY. Signed-off-by:
-
Maxime Chevallier authored
PSE and PD configuration is a PHY-specific command. Instead of targeting the command towards dev->phydev, use the request to pick the targeted PHY device. Signed-off-by:
-
Maxime Chevallier authored
PLCA is a PHY-specific command. Instead of targeting the command towards dev->phydev, use the request to pick the targeted PHY. Signed-off-by:
-
Maxime Chevallier authored
The PHY_GET command, supporting both DUMP and GET operations, is used to retrieve the list of PHYs connected to a netdevice, and get topology information to know where exactly it sits on the physical link. Add the netlink specs corresponding to that command. Signed-off-by:
-
Maxime Chevallier authored
As we have the ability to track the PHYs connected to a net_device through the link_topology, we can expose this list to userspace. This allows userspace to use these identifiers for phy-specific commands and take the decision of which PHY to target by knowing the link topology. Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list devices on only one interface. Signed-off-by:
-
