- 25 Dec, 2017 36 commits
-
-
Arnd Bergmann authored
[ Upstream commit a2125d02 ] The latest gcc-7 snapshot adds a warning to point out that when atk_read_value_old or atk_read_value_new fails, we copy uninitialized data into sensor->cached_value: drivers/hwmon/asus_atk0110.c: In function 'atk_input_show': drivers/hwmon/asus_atk0110.c:651:26: error: 'value' may be used uninitialized in this function [-Werror=maybe-uninitialized] Adding an error check avoids this. All versions of the driver are affected. Fixes: 2c03d07a ("hwmon: Add Asus ATK0110 support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Luca Tettamanti <kronos.it@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rob Herring authored
[ Upstream commit 7d79f609 ] dtc recently added PCI bus checks. Fix these warnings. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit 08d839c4 ] This can be reproduced by running L2 on L1, and disable VPID on L0 if w/o commit "KVM: nVMX: Fix nested VPID vmx exec control", the L2 crash as below: KVM: entry failed, hardware error 0x7 EAX=00000000 EBX=00000000 ECX=00000000 EDX=000306c3 ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000 EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0000 00000000 0000ffff 00009300 CS =f000 ffff0000 0000ffff 00009b00 SS =0000 00000000 0000ffff 00009300 DS =0000 00000000 0000ffff 00009300 FS =0000 00000000 0000ffff 00009300 GS =0000 00000000 0000ffff 00009300 LDT=0000 00000000 0000ffff 00008200 TR =0000 00000000 0000ffff 00008b00 GDT= 00000000 0000ffff IDT= 00000000 0000ffff CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Reference SDM 30.3 INVVPID: Protected Mode Exceptions - #UD - If not in VMX operation. - If the logical processor does not support VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=0). - If the logical processor supports VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=1) but does not support the INVVPID instruction (IA32_VMX_EPT_VPID_CAP[32]=0). So we should check both VPID enable bit in vmx exec control and INVVPID support bit in vmx capability MSRs to enable VPID. This patch adds the guarantee to not enable VPID if either INVVPID or single-context/all-context invalidation is not exposed in vmx capability MSRs. Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit 24dccf83 ] After async pf setup successfully, there is a broadcast wakeup w/ special token 0xffffffff which tells vCPU that it should wake up all processes waiting for APFs though there is no real process waiting at the moment. The async page present tracepoint print prematurely and fails to catch the special token setup. This patch fixes it by moving the async page present tracepoint after the special token setup. Before patch: qemu-system-x86-8499 [006] ...1 5973.473292: kvm_async_pf_ready: token 0x0 gva 0x0 After patch: qemu-system-x86-8499 [006] ...1 5973.473292: kvm_async_pf_ready: token 0xffffffff gva 0x0 Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Dick Kennedy authored
[ Upstream commit a71e3cdc ] lpfc cannot establish connection with targets that send PRLI in P2P configurations. If lpfc rejects a PRLI that is sent from a target the target will not resend and will reject the PRLI send from the initiator. [mkp: applied by hand] Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Patrice Chotard authored
[ Upstream commit e855fa9a ] When using GPIO as IRQ source, the GPIO must be configured in INPUT. Callbacks dedicated for this was missing in pinctrl-st driver. This fix the following kernel error when trying to lock a gpio as IRQ: [ 7.521095] gpio gpiochip7: (PIO11): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 7.526018] gpio gpiochip7: (PIO11): unable to lock HW IRQ 6 for IRQ [ 7.529405] genirq: Failed to request resources for 0-0053 (irq 81) on irqchip GPIO Signed-off-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ec4fbd64 ] Dmitry reported a lockdep splat [1] (false positive) that we can fix by releasing the spinlock before calling icmp_send() from ip_expire() This is a false positive because sending an ICMP message can not possibly re-enter the IP frag engine. [1] [ INFO: possible circular locking dependency detected ] 4.10.0+ #29 Not tainted ------------------------------------------------------- modprobe/12392 is trying to acquire lock: (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] spin_lock include/linux/spinlock.h:299 [inline] (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] __netif_tx_lock include/linux/netdevice.h:3486 [inline] (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 but task is already holding lock: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock include/linux/spinlock.h:299 [inline] (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&q->lock)->rlock){+.-...}: validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] ip_defrag+0x3a2/0x4130 net/ipv4/ip_fragment.c:669 ip_check_defrag+0x4e3/0x8b0 net/ipv4/ip_fragment.c:713 packet_rcv_fanout+0x282/0x800 net/packet/af_packet.c:1459 deliver_skb net/core/dev.c:1834 [inline] dev_queue_xmit_nit+0x294/0xa90 net/core/dev.c:1890 xmit_one net/core/dev.c:2903 [inline] dev_hard_start_xmit+0x16b/0xab0 net/core/dev.c:2923 sch_direct_xmit+0x31f/0x6d0 net/sched/sch_generic.c:182 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_resolve_output+0x6b9/0xb10 net/core/neighbour.c:1308 neigh_output include/net/neighbour.h:478 [inline] ip_finish_output2+0x8b8/0x15a0 net/ipv4/ip_output.c:228 ip_do_fragment+0x1d93/0x2720 net/ipv4/ip_output.c:672 ip_fragment.constprop.54+0x145/0x200 net/ipv4/ip_output.c:545 ip_finish_output+0x82d/0xe10 net/ipv4/ip_output.c:314 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 raw_sendmsg+0x26de/0x3a00 net/ipv4/raw.c:655 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x4a3/0x9f0 net/socket.c:1985 __sys_sendmmsg+0x25c/0x750 net/socket.c:2075 SYSC_sendmmsg net/socket.c:2106 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2101 do_syscall_64+0x2e8/0x930 arch/x86/entry/common.c:281 return_from_SYSCALL_64+0x0/0x7a -> #0 (_xmit_ETHER#2){+.-...}: check_prev_add kernel/locking/lockdep.c:1830 [inline] check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940 validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] __netif_tx_lock include/linux/netdevice.h:3486 [inline] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_hh_output include/net/neighbour.h:468 [inline] neigh_output include/net/neighbour.h:476 [inline] ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x960/0xcf0 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:657 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707 __read_once_size include/linux/compiler.h:254 [inline] atomic_read arch/x86/include/asm/atomic.h:26 [inline] rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline] __rcu_is_watching kernel/rcu/tree.c:1133 [inline] rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147 rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline] filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335 do_fault_around mm/memory.c:3231 [inline] do_read_fault mm/memory.c:3265 [inline] do_fault+0xbd5/0x2080 mm/memory.c:3370 handle_pte_fault mm/memory.c:3600 [inline] __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&q->lock)->rlock); lock(_xmit_ETHER#2); lock(&(&q->lock)->rlock); lock(_xmit_ETHER#2); *** DEADLOCK *** 10 locks held by modprobe/12392: #0: (&mm->mmap_sem){++++++}, at: [<ffffffff81329758>] __do_page_fault+0x2b8/0xb60 arch/x86/mm/fault.c:1336 #1: (rcu_read_lock){......}, at: [<ffffffff8188cab6>] filemap_map_pages+0x1e6/0x1570 mm/filemap.c:2324 #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] spin_lock include/linux/spinlock.h:299 [inline] #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] pte_alloc_one_map mm/memory.c:2944 [inline] #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] alloc_set_pte+0x13b8/0x1b90 mm/memory.c:3072 #3: (((&q->timer))){+.-...}, at: [<ffffffff81627e72>] lockdep_copy_map include/linux/lockdep.h:175 [inline] #3: (((&q->timer))){+.-...}, at: [<ffffffff81627e72>] call_timer_fn+0x1c2/0x820 kernel/time/timer.c:1258 #4: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock include/linux/spinlock.h:299 [inline] #4: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201 #5: (rcu_read_lock){......}, at: [<ffffffff8389a633>] ip_expire+0x1b3/0x6c0 net/ipv4/ip_fragment.c:216 #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] spin_trylock include/linux/spinlock.h:309 [inline] #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_xmit_lock net/ipv4/icmp.c:219 [inline] #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_send+0x803/0x1c80 net/ipv4/icmp.c:681 #7: (rcu_read_lock_bh){......}, at: [<ffffffff838ab9a1>] ip_finish_output2+0x2c1/0x15a0 net/ipv4/ip_output.c:198 #8: (rcu_read_lock_bh){......}, at: [<ffffffff836d1dee>] __dev_queue_xmit+0x23e/0x1e60 net/core/dev.c:3324 #9: (dev->qdisc_running_key ?: &qdisc_running_key){+.....}, at: [<ffffffff836d3a27>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 stack backtrace: CPU: 0 PID: 12392 Comm: modprobe Not tainted 4.10.0+ #29 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:52 print_circular_bug+0x307/0x3b0 kernel/locking/lockdep.c:1204 check_prev_add kernel/locking/lockdep.c:1830 [inline] check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940 validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] __netif_tx_lock include/linux/netdevice.h:3486 [inline] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_hh_output include/net/neighbour.h:468 [inline] neigh_output include/net/neighbour.h:476 [inline] ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x960/0xcf0 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:657 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707 RIP: 0010:__read_once_size include/linux/compiler.h:254 [inline] RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline] RIP: 0010:rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline] RIP: 0010:__rcu_is_watching kernel/rcu/tree.c:1133 [inline] RIP: 0010:rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147 RSP: 0000:ffff8801c391f120 EFLAGS: 00000a03 ORIG_RAX: ffffffffffffff10 RAX: dffffc0000000000 RBX: ffff8801c391f148 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000055edd4374000 RDI: ffff8801dbe1ae0c RBP: ffff8801c391f1a0 R08: 0000000000000002 R09: 0000000000000000 R10: dffffc0000000000 R11: 0000000000000002 R12: 1ffff10038723e25 R13: ffff8801dbe1ae00 R14: ffff8801c391f680 R15: dffffc0000000000 </IRQ> rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline] filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335 do_fault_around mm/memory.c:3231 [inline] do_read_fault mm/memory.c:3265 [inline] do_fault+0xbd5/0x2080 mm/memory.c:3370 handle_pte_fault mm/memory.c:3600 [inline] __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011 RIP: 0033:0x7f83172f2786 RSP: 002b:00007fffe859ae80 EFLAGS: 00010293 RAX: 000055edd4373040 RBX: 00007f83175111c8 RCX: 000055edd4373238 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007f8317510970 RBP: 00007fffe859afd0 R08: 0000000000000009 R09: 0000000000000000 R10: 0000000000000064 R11: 0000000000000000 R12: 000055edd4373040 R13: 0000000000000000 R14: 00007fffe859afe8 R15: 0000000000000000 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jeffy Chen authored
[ Upstream commit f83bf8da ] We have memory leaks of nf_conntrack_helper & expect_policy. Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 2c422257 ] We only allow runtime updates of expectation policies for timeout and maximum number of expectations, otherwise reject the update. Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 1f459262 ] Remove pointer dereference after free. Addresses-Coverity-ID: 1091173 Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Roger Quadros authored
[ Upstream commit 16bb05d9 ] As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor", for interrupt and isochronous endpoints, wMaxPacketSize must be set to 1024 if the endpoint defines bMaxBurst to be greater than zero. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 4071898b ] This gets qmicli working with the MDM6600 modem. Cc: Bjørn Mork <bjorn@mork.no> Reviewed-by:
Sebastian Reichel <sre@kernel.org> Tested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 13e2d518 ] We could allocate less memory than intended because we do: bnad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. Fixes: 7afc5dbd ("bna: Add debugfs interface.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Rasesh Mody <rasesh.mody@cavium.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit aea92fb2 ] skb_cow(skb, sizeof(ip header)) is not very helpful in this context. First we need to use pskb_may_pull() to make sure the ip header is in skb linear part, then use skb_try_make_writable() to address clones issues. Fixes: 4c30719f ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's") Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 8a0f5ccf ] On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote: > > Yes, please. > Disregarding some reports is not a good way long term. Please try this patch. ---8<--- Subject: netlink: Annotate nlk cb_mutex by protocol Currently all occurences of nlk->cb_mutex are annotated by lockdep as a single class. This causes a false lcokdep cycle involving genl and crypto_user. This patch fixes it by dividing cb_mutex into individual classes based on the netlink protocol. As genl and crypto_user do not use the same netlink protocol this breaks the false dependency loop. Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
hayeswang authored
[ Upstream commit 98d068ab ] The list rx_done would be initialized when the linking on occurs. Therefore, if a napi is scheduled without any linking on before, the following kernel panic would happen. BUG: unable to handle kernel NULL pointer dereference at 000000000000008 IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152] PGD 0 Oops: 0002 [#1] SMP Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Vaidyanathan Srinivasan authored
[ Upstream commit ad0a45fd ] If a given cpu is not in cpu_present and cpu hotplug is disabled, arch can skip setting up the cpu_dev. Arch cpuidle driver should pass correct cpu mask for registration, but failing to do so by the driver causes error to propagate and crash like this: [ 30.076045] Unable to handle kernel paging request for data at address 0x00000048 [ 30.076100] Faulting instruction address: 0xc0000000007b2f30 cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670] pc: c0000000007b2f30: kobject_get+0x20/0x70 lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0 sp: c000003feb18b8f0 msr: 9000000000009033 dar: 48 dsisr: 40000000 current = 0xc000003fd2ed8300 paca = 0xc00000000fbab500 softe: 0 irq_happened: 0x01 pid = 1, comm = swapper/0 Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017 enter ? for help [c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0 [c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0 [c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130 [c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0 [c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120 [c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4 [c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0 [c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360 [c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160 [c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74 Validating cpu_dev fixes the crash and reports correct error message like: [ 30.163506] Failed to register cpuidle device for cpu136 [ 30.173329] Registration of powernv driver failed. Signed-off-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> [ rjw: Comment massage ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jon Medhurst authored
[ Upstream commit 974310d0 ] kprobes test cases need to have a stack that is aligned to an 8-byte boundary because they call other functions (and the ARM ABI mandates that alignment) and because test cases include 64-bit accesses to the stack. Unfortunately, GCC doesn't ensure this alignment for inline assembler and for the code in question seems to always misalign it by pushing just the LR register onto the stack. We therefore need to explicitly perform stack alignment at the start of each test case. Without this fix, some test cases will generate alignment faults on systems where alignment is enforced. Even if the kernel is configured to handle these faults in software, triggering them is ugly. It also exposes limitations in the fault handling code which doesn't cope with writes to the stack. E.g. when handling this instruction strd r6, [sp, #-64]! the fault handling code will write to a stack location below the SP value at the point the fault occurred, which coincides with where the exception handler has pushed the saved register context. This results in corruption of those registers. Signed-off-by:
Jon Medhurst <tixy@linaro.org> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 06553175 ] This is arm port of commit 737480a0 ("kprobes/x86: Fix the return address of multiple kretprobes"). Fix the return address of subsequent kretprobes when multiple kretprobes are set on the same function. For example: # cd /sys/kernel/debug/tracing # echo "r:event1 sys_symlink" > kprobe_events # echo "r:event2 sys_symlink" >> kprobe_events # echo 1 > events/kprobes/enable # ln -s /tmp/foo /tmp/bar (without this patch) # cat trace | grep -v ^# ln-82 [000] dn.2 68.446525: event1: (kretprobe_trampoline+0x0/0x18 <- SyS_symlink) ln-82 [000] dn.2 68.447831: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink) (with this patch) # cat trace | grep -v ^# ln-81 [000] dn.1 39.463469: event1: (ret_fast_syscall+0x0/0x1c <- SyS_symlink) ln-81 [000] dn.1 39.464701: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink) Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: KUMANO Syuhei <kumano.prog@gmail.com> Signed-off-by:
-
Jaroslav Kysela authored
[ Upstream commit cc3a47a2 ] This tested patch adds missing initialization for Line-In/Out PINs for the docking station for HP 840 G3. Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jaroslav Kysela authored
[ Upstream commit 04d5466a ] This tested patch adds missing initialization for Line-In/Out PINs for the docking station for HP 820 G2. Signed-off-by:
-
Aaron Lu authored
commit 82ba4fac upstream. Since commit: 52aec330 ("x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR") the TLB remote shootdown is done through call function vector. That commit didn't take care of irq_tlb_count, which a later commit: fd0f5869 ("x86: Distinguish TLB shootdown interrupts from other functions call interrupts") ... tried to fix. The fix assumes every increase of irq_tlb_count has a corresponding increase of irq_call_count. So the irq_call_count is always bigger than irq_tlb_count and we could substract irq_tlb_count from irq_call_count. Unfortunately this is not true for the smp_call_function_single() case. The IPI is only sent if the target CPU's call_single_queue is empty when adding a csd into it in generic_exec_single. That means if two threads are both adding flush tlb csds to the same CPU's call_single_queue, only one IPI is sent. In other words, the irq_call_count is incremented by 1 but irq_tlb_count is incremented by 2. Over time, irq_tlb_count will be bigger than irq_call_count and the substract will produce a very large irq_call_count value due to overflow. Considering that: 1) it's not worth to send more IPIs for the sake of accurate counting of irq_call_count in generic_exec_single(); 2) it's not easy to tell if the call function interrupt is for TLB shootdown in __smp_call_function_single_interrupt(). Not to exclude TLB shootdown from call function count seems to be the simplest fix and this patch just does that. This bug was found by LKP's cyclic performance regression tracking recently with the vm-scalability test suite. I have bisected to commit: 3dec0ba0 ("mm/rmap: share the i_mmap_rwsem") This commit didn't do anything wrong but revealed the irq_call_count problem. IIUC, the commit makes rwc->remap_one in rmap_walk_file concurrent with multiple threads. When remap_one is try_to_unmap_one(), then multiple threads could queue flush TLB to the same CPU but only one IPI will be sent. Since the commit was added in Linux v3.19, the counting problem only shows up from v3.19 onwards. Signed-off-by:
Aaron Lu <aaron.lu@intel.com> Cc: Alex Shi <alex.shi@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com> Link: http://lkml.kernel.org/r/20160811074430.GA18163@aaronlu.sh.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 252d2a41 upstream. idle_task_exit() can be called with IRQs on x86 on and therefore should use switch_mm(), not switch_mm_irqs_off(). This doesn't seem to cause any problems right now, but it will confuse my upcoming TLB flush changes. Nonetheless, I think it should be backported because it's trivial. There won't be any meaningful performance impact because idle_task_exit() is only used when offlining a CPU. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: f98db601 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") Link: http://lkml.kernel.org/r/ca3d1a9fa93a0b49f5a8ff729eda3640fb6abdf9.1497034141.git.luto@kernel.orgSigned-off-by:
-
Steven Rostedt authored
commit ef0491ea upstream. The introduction of switch_mm_irqs_off() brought back an old bug regarding the use of preempt_enable_no_resched: As part of: 62b94a08 ("sched/preempt: Take away preempt_enable_no_resched() from modules") the definition of preempt_enable_no_resched() is only available in built-in code, not in loadable modules, so we can't generally use it from header files. However, the ARM version of finish_arch_post_lock_switch() calls preempt_enable_no_resched() and is defined as a static inline function in asm/mmu_context.h. This in turn means we cannot include asm/mmu_context.h from modules. With today's tip tree, asm/mmu_context.h gets included from linux/mmu_context.h, which is normally the exact pattern one would expect, but unfortunately, linux/mmu_context.h can be included from the vhost driver that is a loadable module, now causing this compile time error with modular configs: In file included from ../include/linux/mmu_context.h:4:0, from ../drivers/vhost/vhost.c:18: ../arch/arm/include/asm/mmu_context.h: In function 'finish_arch_post_lock_switch': ../arch/arm/include/asm/mmu_context.h:88:3: error: implicit declaration of function 'preempt_enable_no_resched' [-Werror=implicit-function-declaration] preempt_enable_no_resched(); Andy already tried to fix the bug by including linux/preempt.h from asm/mmu_context.h, but that didn't help. Arnd suggested reordering the header files, which wasn't popular, so let's use this workaround instead: The finish_arch_post_lock_switch() definition is now also hidden inside of #ifdef MODULE, so we don't see anything referencing preempt_enable_no_resched() from a header file. I've built a few hundred randconfig kernels with this, and did not see any new problems. Tested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-arm-kernel@lists.infradead.org Fixes: f98db601 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") Link: http://lkml.kernel.org/r/1463146234-161304-1-git-send-email-arnd@arndb.deSigned-off-by:
-
Andy Lutomirski authored
commit 078194f8 upstream. Potential races between switch_mm() and TLB-flush or LDT-flush IPIs could be very messy. AFAICT the code is currently okay, whether by accident or by careful design, but enabling PCID will make it considerably more complicated and will no longer be obviously safe. Fix it with a big hammer: run switch_mm() with IRQs off. To avoid a performance hit in the scheduler, we take advantage of our knowledge that the scheduler already has IRQs disabled when it calls switch_mm(). Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f19baf759693c9dcae64bbff76189db77cb13398.1461688545.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
commit 69c0319a upstream. It's fairly large and it has quite a few callers. This may also help untangle some headers down the road. Signed-off-by:
-
Andy Lutomirski authored
commit e1074888 upstream. Currently all of the functions that live in tlb.c are inlined on !SMP builds. One can debate whether this is a good idea (in many respects the code in tlb.c is better than the inlined UP code). Regardless, I want to add code that needs to be built on UP and SMP kernels and relates to tlb flushing, so arrange for tlb.c to be compiled unconditionally. Signed-off-by:
-
Andy Lutomirski authored
commit f98db601 upstream. By default, this is the same thing as switch_mm(). x86 will override it as an optimization. Signed-off-by:
-
Ingo Molnar authored
commit 8efd755a upstream. Some architectures (such as Alpha) rely on include/linux/sched.h definitions in their mmu_context.h files. So include sched.h before mmu_context.h. Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Nadav Amit authored
commit 858eaaa7 upstream. The recently introduced batched invalidations mechanism uses its own mechanism for shootdown. However, it does wrong accounting of interrupts (e.g., inc_irq_stat is called for local invalidations), trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and may break some platforms as it bypasses the invalidation mechanisms of Xen and SGI UV. This patch reuses the existing TLB flushing mechnaisms instead. We use NULL as mm to indicate a global invalidation is required. Fixes 72b252ae ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages") Signed-off-by:
Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Lutomirski authored
commit d8bced79 upstream. On my Skylake laptop, INVPCID function 2 (flush absolutely everything) takes about 376ns, whereas saving flags, twiddling CR4.PGE to flush global mappings, and restoring flags takes about 539ns. Signed-off-by:
-
Andy Lutomirski authored
commit d12a72b8 upstream. This adds a chicken bit to turn off INVPCID in case something goes wrong. It's an early_param() because we do TLB flushes before we parse __setup() parameters. Signed-off-by:
-
Borislav Petkov authored
commit e2c7698c upstream. So we want to specify the dependency on both @pcid and @addr so that the compiler doesn't reorder accesses to them *before* the TLB flush. But for that to work, we need to express this properly in the inline asm and deref the whole desc array, not the pointer to it. See clwb() for an example. This fixes the build error on 32-bit: arch/x86/include/asm/tlbflush.h: In function ‘__invpcid’: arch/x86/include/asm/tlbflush.h:26:18: error: memory input 0 is not directly addressable which gcc4.7 caught but 5.x didn't. Which is strange. :-\ Signed-off-by:
-
Andy Lutomirski authored
commit 060a402a upstream. This adds helpers for each of the four currently-specified INVPCID modes. Signed-off-by:
-
Vaibhav Jain authored
commit 12841f87 upstream. During an eeh a kernel-oops is reported if no vPHB is allocated to the AFU. This happens as during AFU init, an error in creation of vPHB is a non-fatal error. Hence afu->phb should always be checked for NULL before iterating over it for the virtual AFU pci devices. This patch fixes the kenel-oops by adding a NULL pointer check for afu->phb before it is dereferenced. Fixes: 9e8df8a2 ("cxl: EEH support") Signed-off-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Steve Capper authored
commit f24e5834 upstream. The high_memory global variable is used by cma_declare_contiguous(.) before it is defined. We don't notice this as we compute __pa(high_memory - 1), and it looks like we're processing a VA from the direct linear map. This problem becomes apparent when we flip the kernel virtual address space and the linear map is moved to the bottom of the kernel VA space. This patch moves the initialisation of high_memory before it used. Fixes: f7426b98 ("mm: cma: adjust address limit to avoid hitting low/high memory boundary") Signed-off-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
- 20 Dec, 2017 4 commits
-
-
Greg Kroah-Hartman authored
-
Miaoqing Pan authored
[ Upstream commit ee0a4718 ] When the user sets count to zero the string buffer would remain completely uninitialized which causes the kernel to parse its own stack data, potentially leading to an info leak. In addition to that, the string might be not terminated properly when the user data does not contain a 0-terminator. Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by:
Christoph Böhmwalder <christoph@boehmwalder.at> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Alex Vesker authored
[ Upstream commit b4b678b0 ] When ndo_open and ndo_stop are called RTNL lock should be held. In this specific case ipoib_ib_dev_open calls the offloaded ndo_open which re-sets the number of TX queue assuming RTNL lock is held. Since RTNL lock is not held, RTNL assert will fail. Signed-off-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit c0b64f58 ] According to the C standard the behavior of computations with integer operands is as follows: * A computation involving unsigned operands can never overflow, because a result that cannot be represented by the resulting unsigned integer type is reduced modulo the number that is one greater than the largest value that can be represented by the resulting type. * The behavior for signed integer underflow and overflow is undefined. Hence only use unsigned integers when checking for integer overflow. This patch is what I came up with after having analyzed the following smatch warnings: drivers/infiniband/core/cma.c:3448: cma_resolve_ib_udp() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len' drivers/infiniband/core/cma.c:3505: cma_connect_ib() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len' Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
