From: David Mosberger <davidm@napali.hpl.hp.com>

From: Martin Diehl <lists@mdiehl.de>

There was a spin_unlock missing in the raw mode tx-completion path.  Probably
it slipped through because the raw mode stuff is never reached with my Actisys
hardware.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Network driver changes:
 - iucv: Make grab_param function SMP safe.
 - lcs: Fix null-pointer dereference after unsuccessful set_online.
 - qeth: Fix kmalloc flags in qeth_alloc_reply.
 - qeth: Show broadcase capability also in route4/6 sysfs attributes.
 - qeth: Remove debug code.
 - qeth: Add option to qetharp user space interface to strip unused
         fields from query arp records.
 - qeth: Add shortcut in outbound path for HiperSockets.
 - qeth: Add more info to qeth_perf_stats.
 - qeth: Add support for direct SNMP interface to OSA express cards.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

zfcp host adapter change:
 - Remove misplaced dot in error message.
 - Remove unused performance statistics code.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

dasd device driver changes:
 - Reset pointer from ccw device to dasd_devmap on device removal.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390 core changes:
 - Fix system call trace / audit interface.
 - Fix find_first_bit / find_next_bit inlines assembly constraints.

From: Mingming Cao <cmm@us.ibm.com>

There is a uninitialized goal value being referenced in both ext3 and ext2
find goal block functions (ext3_find_goal() and ext2_find_goal()).

In the non-sequential write case, these functions check the goal value(non
zero) before calling ext3(2)_find_near() to find the goal block to
allocate.

Since the goal value is uninitialized(non zero), the ext3(2)_find_near() is
never being called in the non-sequential write, thus ext3(2)_find_goal()
failed to guide a goal block in the random write case.

ext3(2)_new_block() takes the junk goal value and will turn it to goal 0
since it's normally beyond the filesystem block number limit.  The fix is
trivial.

From: Rusty Russell <rusty@rustcorp.com.au>

The IA64 hotplug CPU merge seems to have included some core changes: in
particular the recalc_bh_state() needs to sum for all (including offline)
cpus, since we don't empty the counters on CPU down.  The totals printed by
/proc/stat (the first loop) should include offline cpus, too (apparently
printing out the per-cpu lines for offline cpus confuses top).

The recent ARM-specific fix broke ia32.  Hopefully the ARM team can find an
arch-specific implementation of VGA_MAP_MEM() which makes it work.

From: Matt Mackall <mpm@selenic.com>

Doing the algebra:

c = (a - b) * 3/2
a' = a - c = a - 3/2(a - b) = (2a - 3a + 3b)/2 = (3b - a)/2
a' >= 0
3b - a >= 0
3b >= a
b >= a/3
nr_free_pages() >= mempages/3

We can indeed get into trouble if we try to load a large kernel on a very
small box (ie kernel reserves more than 2/3 of usable memory).  Surprisingly I
haven't hit this, but here's a fix.

From: "J. Bruce Fields" <bfields@fieldses.org>

svc_recv may call svc_sock_release before rqstp->rq_res is initialized.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

To help the user diagnose problems caused by user-level daemons not running.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

Currently we are counting the number of threads already asleep and returning
an immediate NFS4ERR_DELAY (==JUKEBOX) error if more than half are already
asleep.

This patch removes that logic, so instead we only return NFS4ERR_DELAY if an
upcall times out (if it takes more than a second to return).

With the thread counting there is the risk that even when all the relevant
subsystems are responsive, the client may still see occasional NFS4ERR_DELAY
returns just because, by coincidence, several upcalls were initiated at the
same time.  I expect clients will delay several seconds before retrying after
NFS4ERR_DELAY, so this will be quite noticeable to users.  Sporadic long
delays like this are likely to lead users to suspect a problem somewhere, when
in fact there is none.

The current scheme ensures that we can still process requests not depending on
upcalls, even when all threads would otherwise be tied up waiting on upcalls. 
However, this is not something that should happen under normal circumstances;
if a server spends a significant portion of its time with all threads waiting
for upcalls, this a sign that something is seriously wrong.

In such a circumstance (e.g., an ldap server dies), we can, at least, bound
the waiting time to a second without the need for counting threads.

In short, removing the thread-counting will allow us to behave predictably
when things are working, while still allowing some progress when they don't.

It would be a worthwhile project to measure the amount of time threads spend
waiting for upcalls (or for reads, for that matter); if a significant portion
of the time they spend handling requests is spent sleeping, then there's an
opportunity to improve nfsd performance: if we can break the one-to-one
mapping between requests and threads, then we can lower the number of threads
required to keep the nfs server busy.

However, both the currently available options for doing this are problematic:
returning JUKEBOX/DELAY errors at random times will lead to unpredictable
performance, and saving a copy of the request to be processed from scratch
again later is wasteful and makes it difficult to provide correct semantics,
especially in the NFSv4 case.

So for now I believe waits with short timeouts are the best option.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

1 second should be plenty of time; if we're going to take longer than that
it's probably better just to return NFS4ERR_DELAY and let the client retry
anyway.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

Slightly better behavior on failed mapping (which may happen either because
idmapd is not running, or because there it has told us it doesn't know the
mapping.):

	on name->id (setattr), return BADNAME.  (I used ESRCH to
		communicate BADNAME, just because it was the first error in
		include/asm-generic/errno-base.h that had something to
		do with nonexistance of something, and that we weren't
		already using.)

	id->name (getattr), return a string representation of the numerical
		id.  This is probably useless to the client, especially
		since we're unlikely to accept such a string on a setattr,
		but perhaps some client will find it mildly helpful.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

Also fix leaks on error; split up code a bit to make it easier to verify
correctness.

From: NeilBrown <neilb@cse.unsw.edu.au>

nfsd_cross_mnt can release the reference to the passed svc_export structure
when it returns a different svc_export structure.  So we need to make sure we
have a counted reference before, and drop the reference afterwards.

From: NeilBrown <neilb@cse.unsw.edu.au>

fh_compose currently consumes a reference to the dentry but not the export
point.  This is both inconsistent and confusing.

It is better if a routine like this doesn't consume reference points, so with
this patch, it doesn't.  This fixes a couple of very subtle and unusual
reference counting errors.

From: NeilBrown <neilb@cse.unsw.edu.au>

We currently serialize all writes to these caches with queue_io_sem, so we
only needed one buffer.

There is some need for larger-than-one-page writes, so we can just statically
allocate a buffer.

From: NeilBrown <neilb@cse.unsw.edu.au>

This is important for update-in-place caches which may change from being
negative to posative.

Thanks to "J.  Bruce Fields" <bfields@fieldses.org> and Olaf Kirch
<okir@suse.de>

From: NeilBrown <neilb@cse.unsw.edu.au>

With the _bh, we can deadlock.

From: "Randy.Dunlap" <rddunlap@osdl.org>

We need to call mca_system_init() to register MCA bus struct, otherwise
find_mca_adapter() oopses with a NULL ptr dereference.

Fixes this oops reported last week:
	http://marc.theaimsgroup.com/?l=linux-kernel&m=108455738606747&w=2

Thanks to James Bottomley for pointing this out.

From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br>

drivers/cdrom/azctd.c:379: warning: `pa_ok' defined but not used

We just tested the page's uptodateness, no point in doing it again.

From: Matt Domsch <Matt_Domsch@dell.com>

* Adds MODULE_VERSION

* Remove check for efi_enabled in efivars_exit() - we aborted module load at
  init based on this already.

From: Matt Domsch <Matt_Domsch@dell.com>

EDD: Remove no longer needed SCSI header file inclusion.

Thanks to ArjanV for reminding me.

From: Jonathan Corbet <corbet@lwn.net>

I noticed a patch went in to Documentation/SubmittingDrivers which tweaked
the URL for KernelTraffic.  Here's a self-serving patch which makes that
section more complete; to be fair, I added two other sites too.  Just in
case it's useful.

From: Jan Kara <jack@ucw.cz>

This patch fixes possible quota files corruption which could happen when root
did not have any inodes&space allocated.

Originally this could not happen as structure would not be written to disk in
that case but with journalled quota we need to write even all-zero structure. 
The fix is not very nice but change of the format on disk is probably worse (I
made a mistake with not including the usage-bitmaps into format :().

From: Stephen Smalley <sds@epoch.ncsc.mil>

This patch against 2.6.6 fixes error handling for two out-of-memory conditions
in selinuxfs, avoiding potential deadlock due to returning without releasing a
semaphore.  The patch was submitted by Karl MacMillan of Tresys.

From: "Randy.Dunlap" <rddunlap@osdl.org>

The module parameter name is incorrect (looks like a thinko).

From: Andreas Gruenbacher <agruen@suse.de>

Here is a patch that re-adds support for more than one directory in SUBDIRS.
We have a number of packages that use this.

The FORCE dependency of crmodverdir seems unnecessary; removing.

(acked by Sam)

From: Christoph Hellwig <hch@lst.de>

This one is missing updates from the v4l1 interfaces in 2.4 to the 2.6ish
v4l2 and thus doesn't compile.  While we're at it also remove the
MOD_{INC,DEC}_USE_COUNT calls in it that were bogus even in 2.4 to avoid
false positives in grep.

From: Christoph Hellwig <hch@lst.de>

If we want new drivers to not use obsolete interfaces we're better off not
mentioning it in the documentation.

From: Christoph Hellwig <hch@lst.de>

This driver is unloadable for the pci case, but not if vlb cards are found so
we can't use the module_exit removal to lock it into memory.

Replace the MOD_INC_USE_COUNT with __module_get in it's module_init routine.

It no longer exists.

drivers/atm/fore200e.c: In function `fore200e_close':
drivers/atm/fore200e.c:1659: warning: use of cast expressions as lvalues is deprecated