Fix boot crash on Raspberry Pi by moving the update to `event->datalen`
before data is copied into flexible-array member `data` via `memcpy()`.

Flexible-array member `data` was annotated with `__counted_by(datalen)`
in commit 62d19b35 ("wifi: brcmfmac: fweh: Add __counted_by for
struct brcmf_fweh_queue_item and use struct_size()"). The intention of
this is to gain visibility into the size of `data` at run-time through
its _counter_ (in this case `datalen`), and with this have its accesses
bounds-checked at run-time via CONFIG_FORTIFY_SOURCE and
CONFIG_UBSAN_BOUNDS.

To effectively accomplish the above, we shall update the counter
(`datalen`), before the first access to the flexible array (`data`),
which was also done in the mentioned commit.

However, commit edec4282 ("wifi: brcmfmac: allow per-vendor event
handling") inadvertently caused a buffer overflow, detected by
FORTIFY_SOURCE. It moved the `event->datalen = datalen;` update to after
the first `data` access, at which point `event->datalen` was not yet
updated from zero (after calling `kzalloc()`), leading to the overflow
issue.

This fix repositions the `event->datalen = datalen;` update before
accessing `data`, restoring the intended buffer overflow protection. :)

Fixes: edec4282 ("wifi: brcmfmac: allow per-vendor event handling")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://gist.github.com/nathanchance/e22f681f3bfc467f15cdf6605021aaa6Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/Zc+3PFCUvLoVlpg8@neat

Through the routine bond_mii_monitor(), bonding driver inspects and commits
the slave state changes. During the times when slave state change and
failure in aqcuiring rtnl lock happen at the same time, the routine
bond_mii_monitor() reschedules itself to come around after 1 msec to commit
the new state.

During this, it executes the routine bond_miimon_inspect() to re-inspect
the state chane and prints the corresponding slave state on to the console.
Hence we do see a message at every 1 msec till the rtnl lock is acquired
and state chage is committed.

This patch doesn't change how bond functions. It only simply limits this
kind of log flood.
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20240221082752.4660-1-praveen.kannoju@oracle.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Westphal says:

====================
netfilter updates for net-next

1. Prefer KMEM_CACHE() macro to create kmem caches, from Kunwu Chan.

Patches 2 and 3 consolidate nf_log NULL checks and introduces
extra boundary checks on family and type to make it clear that no out
of bounds access will happen.  No in-tree user currently passes such
values, but thats not clear from looking at the function.
From Pablo Neira Ayuso.

Patch 4, also from Pablo, gets rid of unneeded conditional in
nft_osf init function.

Patch 5, from myself, fixes erroneous Kconfig dependencies that
came in an earlier net-next pull request. This should get rid
of the xtables related build failure reports.

Patches 6 to 10 are an update to nftables' concatenated-ranges
set type to speed up element insertions.  This series also
compacts a few data structures and cleans up a few oddities such
as reliance on ZERO_SIZE_PTR when asking to allocate a set with
no elements. From myself.

Patches 11 moves the nf_reinject function from the netfilter core
(vmlinux) into the nfnetlink_queue backend, the only location where
this is called from. Also from myself.

Patch 12, from Kees Cook, switches xtables' compat layer to use
unsafe_memcpy because xt_entry_target cannot easily get converted
to a real flexible array (its UAPI and used inside other structs).

* tag 'nf-next-24-02-21' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: x_tables: Use unsafe_memcpy() for 0-sized destination
  netfilter: move nf_reinject into nfnetlink_queue modules
  netfilter: nft_set_pipapo: use GFP_KERNEL for insertions
  netfilter: nft_set_pipapo: speed up bulk element insertions
  netfilter: nft_set_pipapo: shrink data structures
  netfilter: nft_set_pipapo: do not rely on ZERO_SIZE_PTR
  netfilter: nft_set_pipapo: constify lookup fn args where possible
  netfilter: xtables: fix up kconfig dependencies
  netfilter: nft_osf: simplify init path
  netfilter: nf_log: validate nf_logger_find_get()
  netfilter: nf_log: consolidate check for NULL logger in lookup function
  netfilter: expect: Simplify the allocation of slab caches in nf_conntrack_expect_init
====================

Link: https://lore.kernel.org/r/20240221112637.5396-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With commit 34d21de9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the ipv6/sit driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240221161732.3026127-1-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing articles.
Fix plural vs. singular.
Fix present vs. future.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sathesh B Edara <sedara@marvell.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b3b97462c3d9eba2ec03dd6d597e63bf49a7365a.1708512706.git.geert+renesas@glider.beSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a spelling mistake in a netif_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220091737.2676984-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240215080500.2616848-1-agordeev@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

net/ipv4/udp.c
  f796feab ("udp: add local "peek offset enabled" flag")
  56667da7 ("net: implement lockless setsockopt(SO_PEEK_OFF)")

Adjacent changes:

net/unix/garbage.c
  aa82ac51 ("af_unix: Drop oob_skb ref before purging queue in GC.")
  11498715 ("af_unix: Remove io_uring code for GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.9

The third "new features" pull request for v6.9. This is a quick
followup to send commit 04edb5dc ("wifi: ath12k: Fix uninitialized
use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
introduced in the previous pull request.

We also have support for QCA2066 in ath11k, several new features in
ath12k and few other changes in drivers. In stack it's mostly cleanup
and refactoring.

Major changes:

ath12k
 * firmware-2.bin support
 * support having multiple identical PCI devices (firmware needs to
   have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
 * QCN9274: support split-PHY devices
 * WCN7850: enable Power Save Mode in station mode
 * WCN7850: P2P support

ath11k:
 * QCA6390 & WCN6855: support 2 concurrent station interfaces
 * QCA2066 support

iwlwifi
 * mvm: support wider-bandwidth OFDMA
 * bump firmware API to 90 for BZ/SC devices

brcmfmac
 * DMI nvram filename quirk for ACEPC W5 Pro

* tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (75 commits)
  wifi: wilc1000: revert reset line logic flip
  wifi: brcmfmac: Add DMI nvram filename quirk for ACEPC W5 Pro
  wifi: rtlwifi: set initial values for unexpected cases of USB endpoint priority
  wifi: rtl8xxxu: check vif before using in rtl8xxxu_tx()
  wifi: rtlwifi: rtl8192cu: Fix TX aggregation
  wifi: wilc1000: remove AKM suite be32 conversion for external auth request
  wifi: nl80211: refactor parsing CSA offsets
  wifi: nl80211: force WLAN_AKM_SUITE_SAE in big endian in NL80211_CMD_EXTERNAL_AUTH
  wifi: iwlwifi: load b0 version of ucode for HR1/HR2
  wifi: iwlwifi: handle per-phy statistics from fw
  wifi: iwlwifi: iwl-fh.h: fix kernel-doc issues
  wifi: iwlwifi: api: fix kernel-doc reference
  wifi: iwlwifi: mvm: unlock mvm if there is no primary link
  wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
  wifi: iwlwifi: mvm: support PHY context version 6
  wifi: iwlwifi: mvm: partially support PHY context version 6
  wifi: iwlwifi: mvm: support wider-bandwidth OFDMA
  wifi: cfg80211: use ML element parsing helpers
  wifi: mac80211: align ieee80211_mle_get_bss_param_ch_cnt()
  wifi: cfg80211: refactor RNR parsing
  ...
====================

Link: https://lore.kernel.org/r/20240222105205.CEC54C433F1@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - af_unix: fix another unix GC hangup

  Previous releases - regressions:

   - core: fix a possible AF_UNIX deadlock

   - bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()

   - netfilter: nft_flow_offload: release dst in case direct xmit path
     is used

   - bridge: switchdev: ensure MDB events are delivered exactly once

   - l2tp: pass correct message length to ip6_append_data

   - dccp/tcp: unhash sk from ehash for tb2 alloc failure after
     check_estalblished()

   - tls: fixes for record type handling with PEEK

   - devlink: fix possible use-after-free and memory leaks in
     devlink_init()

  Previous releases - always broken:

   - bpf: fix an oops when attempting to read the vsyscall page through
     bpf_probe_read_kernel

   - sched: act_mirred: use the backlog for mirred ingress

   - netfilter: nft_flow_offload: fix dst refcount underflow

   - ipv6: sr: fix possible use-after-free and null-ptr-deref

   - mptcp: fix several data races

   - phonet: take correct lock to peek at the RX queue

  Misc:

   - handful of fixes and reliability improvements for selftests"

* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  l2tp: pass correct message length to ip6_append_data
  net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
  selftests: ioam: refactoring to align with the fix
  Fix write to cloned skb in ipv6_hop_ioam()
  phonet/pep: fix racy skb_queue_empty() use
  phonet: take correct lock to peek at the RX queue
  net: sparx5: Add spinlock for frame transmission from CPU
  net/sched: flower: Add lock protection when remove filter handle
  devlink: fix port dump cmd type
  net: stmmac: Fix EST offset for dwmac 5.10
  tools: ynl: don't leak mcast_groups on init error
  tools: ynl: make sure we always pass yarg to mnl_cb_run
  net: mctp: put sock on tag allocation failure
  netfilter: nf_tables: use kzalloc for hook allocation
  netfilter: nf_tables: register hooks last when adding new chain/flowtable
  netfilter: nft_flow_offload: release dst in case direct xmit path is used
  netfilter: nft_flow_offload: reset dst in route object after setting up flow
  netfilter: nf_tables: set dormant flag on hook register failure
  selftests: tls: add test for peeking past a record of a different type
  selftests: tls: add test for merging of same-type control messages
  ...

Pull tracing fix from Steven Rostedt:

 - While working on the ring buffer I noticed that the counter used for
   knowing where the end of the data is on a sub-buffer was not a full
   "int" but just 20 bits. It was masked out to 0xfffff.

   With the new code that allows the user to change the size of the
   sub-buffer, it is theoretically possible to ask for a size bigger
   than 2^20. If that happens, unexpected results may occur as there's
   no code checking if the counter overflowed the 20 bits of the write
   mask. There are other checks to make sure events fit in the
   sub-buffer, but if the sub-buffer itself is too big, that is not
   checked.

   Add a check in the resize of the sub-buffer to make sure that it
   never goes beyond the size of the counter that holds how much data is
   on it.

* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Do not let subbuf be bigger than write mask

Michael Chan says:

====================
bnxt_en: Ntuple filter improvements

The current Ntuple filter implementation has a limitation on 5750X (P5)
and newer chips.  The destination ring of the ntuple filter must be
a valid ring in the RSS indirection table.  Ntuple filters may not work
if the RSS indirection table is modified by the user to only contain a
subset of the rings.  If an ntuple filter is set to a ring destination
that is not in the RSS indirection table, the packet matching that
filter will be placed in a random ring instead of the specified
destination ring.

This series of patches will fix the problem by using a separate VNIC
for ntuple filters.  The default VNIC will be dedicated for RSS and
so the indirection table can be setup in any way and will not affect
ntuple filters using the separate VNIC.

Quite a bit of refactoring is needed to do the the VNIC and RSS
context accounting in the first few patches.  This is technically a
bug fix, but I think the changes are too big for -net.
====================

Link: https://lore.kernel.org/r/20240220230317.96341-1-michael.chan@broadcom.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The newly created vnic (BNXT_VNIC_NTUPLE) is ready to be used to create
ntuple filters when supported by firmware.  All RX rings can be used
regardless of the RSS indirection setting on the default VNIC.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Allocate and setup the additional VNIC for ntuple filters if this
new method is supported by the firmware.  Even though this VNIC is
only used for ntuple filters with direct ring destinations, we still
setup the RSS hash to be identical to the default VNIC so that each
RX packet will have the correct hash in the RX completion.  This
VNIC is always at VNIC index BNXT_VNIC_NTUPLE.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

On newer chips that support the ring table index method for
ntuple filters, the current scheme of using the same VNIC for
both RSS and ntuple filters will not work in all cases.  An
ntuple filter can only be directed to a destination ring if
that destination ring is also in the RSS indirection table.

To support ntuple filters with any arbitratry RSS indirection
table that may only include a subset of the rings, we need to
use a separate VNIC for ntuple filters.

This patch provisions the additional VNIC.  The next patch will
allocate additional VNIC from firmware and set it up.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Replace hard coded 0 index with more meaningful BNXT_VNIC_DEFAULT.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Refactor bnxt_set_features() function to have a common
function to re-init.  We'll need this to reinitialize when
ntuple configuration changes.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Refactor the code by adding a new function to calculate the number of
required VNICs.  This is used in multiple places when reserving or
checking resources.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bnxt_check_rings() is called to check if we have enough resource
assets to satisfy the new number of ethtool channels.  If the asset
test fails, the ethtool operation will fail gracefully.  Otherwise
we will proceed and commit to use the new number of channels.  If it
fails to allocate any resources, the chip will fail to come up.

For completeness, check all possible resources before committing to
the new settings.  Add the missing ring group and RSS context asset
tests in bnxt_check_rings().
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add RSS context fields to struct bnxt_hw_rings and struct bnxt_hw_resc.
With these, we can now specific the exact number of RSS contexts to
reserve and store the reserved value.  The original code relies on
other resources to infer the number of RSS contexts to reserve and the
reserved value is not stored.  This improved infrastructure will make
the RSS context accounting more complete and is needed by later
patches.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The current code assumes that every RX ring group and every TX ring
requires a completion ring on P5_PLUS chips.  Now that we have the
bnxt_hw_rings structure, add the cp_p5 field so that it can
be explicitly specified.  This makes the logic more clear.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The current functions to reserve hardware rings pass in 6 different ring
or resource types as parameters.  Add a structure bnxt_hw_rings to
consolidate all these parameters and pass the structure pointer instead
to these functions.  Add 2 related helper functions also.  This makes
the code cleaner and makes it easier to add new resources to be
reserved.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Jeremy Kerr says:

====================
MCTP core protocol updates, minor fixes & tests

This series implements some procotol improvements for AF_MCTP,
particularly for systems with multiple MCTP networks defined. For those,
we need to add the network ID to the tag lookups, which then suggests an
updated version of the tag allocate / drop ioctl to allow the net ID to
be specified there too.

The ioctl change affects uabi, so might warrant some extra attention.

There are also a couple of new kunit tests for multiple-net
configurations.

We have a fix for populating the flow data when fragmenting, and a
testcase for that too.

Of course, any queries/comments/etc., please let me know!
====================

Link: https://lore.kernel.org/r/cover.1708335994.git.jk@codeconstruct.com.auSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Ensure we have the correct key parameters on sending a message.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When CONFIG_MCTP_FLOWS is enabled, outgoing skbs should have their
SKB_EXT_MCTP extension set for drivers to consume.

Add two tests for local-to-output routing that check for the flow
extensions: one for the simple single-packet case, and one for
fragmentation.

We now make MCTP_TEST select MCTP_FLOWS, so we always get coverage of
these flow tests. The tests are skippable if MCTP_FLOWS is (otherwise)
disabled, but that would need manual config tweaking.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

If we're fragmenting on local output, the original packet may contain
ext data for the MCTP flows. We'll want this in the resulting fragment
skbs too.

So, do a skb_ext_copy() in the fragmentation path, and implement the
MCTP-specific parts of an ext copy operation.

Fixes: 67737c45 ("mctp: Pass flow data & flow release events to drivers")
Reported-by: Jian Zhang <zhangjian.3032@bytedance.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add a couple of tests that excersise the new net-specific sk_key and
bind lookups
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We'll want to create net-specific test setups in an upcoming change, so
allow the caller to provide a non-default netid.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Now that we have net-specific tags, extend the tag allocation ioctls
(SIOCMCTPALLOCTAG / SIOCMCTPDROPTAG) to allow a network parameter to be
passed to the tag allocation.

We also add a local_addr member to the ioc struct, to allow for a future
finer-grained tag allocation using local EIDs too. We don't add any
specific support for that now though, so require MCTP_ADDR_ANY or
MCTP_ADDR_NULL for those at present.

The old ioctls will still work, but allocate for the default MCTP net.
These are now marked as deprecated in the header.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, we lookup sk_keys from the entire struct net_namespace, which
may contain multiple MCTP net IDs. In those cases we want to distinguish
between endpoints with the same EID but different net ID.

Add the net ID data to the struct mctp_sk_key, populate on add and
filter on this during route lookup.

For the ioctl interface, we use a default net of
MCTP_INITIAL_DEFAULT_NET (ie., what will be in use for single-net
configurations), but we'll extend the ioctl interface to provide
net-specific tag allocation in an upcoming change.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In our test skb creation functions, we're not setting up the net and
device data. This doesn't matter at the moment, but we will want to add
support for distinct net IDs in future.

Set the ->net identifier on the test MCTP device, and ensure that test
skbs are set up with the correct device-related data on creation. Create
a helper for setting skb->dev and mctp_skb_cb->net.

We have a few cases where we're calling __mctp_cb() to initialise the cb
(which we need for the above) separately, so integrate this into the skb
creation helpers.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We may have an ANY address in either the local or peer address of a
sk_key, and may want to match on an incoming daddr or saddr being ANY.

Do this by altering the conflicting-tag lookup to also accept ANY as
the local/peer address.

We don't want mctp_address_matches to match on the requested EID being
ANY, as that is a specific lookup case on packet input.
Reported-by: Eric Chuang <echuang@google.com>
Reported-by: Anthony <anthonyhkf@google.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We could do with a little more comment on where MCTP_ADDR_ANY will match
in the key allocations.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We have a double-swap of local and peer addresses in
mctp_alloc_local_tag; the arguments in both call sites are swapped, but
there is also a swap in the implementation of alloc_local_tag. This is
opaque because we're using source/dest address references, which don't
match the local/peer semantics.

Avoid this confusion by naming the arguments as 'local' and 'peer', and
remove the double swap. The calling order now matches mctp_key_alloc.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ath.git patches for v6.9

We have support for QCA2066 now and also several new features in ath12k.

Major changes:

ath12k

* firmware-2.bin support

* support having multiple identical PCI devices (firmware needs to
  have ATH12K_FW_FEATURE_MULTI_QRTR_ID)

* QCN9274: support split-PHY devices

* WCN7850: enable Power Save Mode in station mode

* WCN7850: P2P support

ath11k:

* QCA6390 & WCN6855: support 2 concurrent station interfaces

* QCA2066 support

l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.

To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.

However, the code which performed the calculation was incorrect:

     ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;

...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.

Add parentheses to correct the calculation in line with the original
intent.

Fixes: 9d4c7580 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) If user requests to wake up a table and hook fails, restore the
   dormant flag from the error path, from Florian Westphal.

2) Reset dst after transferring it to the flow object, otherwise dst
   gets released twice from the error path.

3) Release dst in case the flowtable selects a direct xmit path, eg.
   transmission to bridge port. Otherwise, dst is memleaked.

4) Register basechain and flowtable hooks at the end of the command.
   Error path releases these datastructure without waiting for the
   rcu grace period.

5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report
   on access to hook type, also from Florian Westphal.

netfilter pull request 24-02-22

* tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: use kzalloc for hook allocation
  netfilter: nf_tables: register hooks last when adding new chain/flowtable
  netfilter: nft_flow_offload: release dst in case direct xmit path is used
  netfilter: nft_flow_offload: reset dst in route object after setting up flow
  netfilter: nf_tables: set dormant flag on hook register failure
====================

Link: https://lore.kernel.org/r/20240222000843.146665-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Daniel Borkmann says:

====================
pull-request: bpf 2024-02-22

The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).

The main changes are:

1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
   page through bpf_probe_read_kernel and friends, from Hou Tao.

2) Fix a kernel panic due to uninitialized iter position pointer in
   bpf_iter_task, from Yafang Shao.

3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
   from Martin KaFai Lau.

4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
   due to incorrect truesize accounting, from Sebastian Andrzej Siewior.

5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
   from Shigeru Yoshida.

6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
   resolved, from Hari Bathini.

bpf-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
  selftests/bpf: Add negtive test cases for task iter
  bpf: Fix an issue due to uninitialized bpf_iter_task
  selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
  bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
  selftest/bpf: Test the read of vsyscall page under x86-64
  x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
  x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
  bpf, scripts: Correct GPL license name
  xsk: Add truesize to skb_add_rx_frag().
  bpf: Fix warning for bpf_cpumask in verifier
====================

Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit bb726b75 ("net: phy: realtek: add support for
RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing
support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY.

While that commit indicated that the RTL8211F_PHYCR2 register is not
supported by the "VD-CG" PHY model and therefore updated the corresponding
section in rtl8211f_config_init() to be invoked conditionally, the call to
"genphy_soft_reset()" was left as-is, when it should have also been invoked
conditionally. This is because the call to "genphy_soft_reset()" was first
introduced by the commit 0a4355c2 ("net: phy: realtek: add dt property
to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY
reset should be issued after setting bits in the PHYCR2 register.

As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the
rtl8211f_config_init() function by invoking "genphy_soft_reset()"
conditionally based on the presence of the "PHYCR2" register.

Fixes: bb726b75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220070007.968762-1-s-vadapalli@ti.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Justin Iurman says:

====================
ioam6: fix write to cloned skb's

Make sure the IOAM data insertion is not applied on cloned skb's. As a
consequence, ioam selftests needed a refactoring.
====================

Link: https://lore.kernel.org/r/20240219135255.15429-1-justin.iurman@uliege.beSigned-off-by: Paolo Abeni <pabeni@redhat.com>