- 20 May, 2021 2 commits
-
-
Anusha Srivatsa authored
No functional change. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
No functional change. v2: Chchpatch fixes. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
- 18 May, 2021 2 commits
-
-
José Roberto de Souza authored
If the do while loop breaks in 'if (!sg_dma_len(sgl))' in the first iteration, err is uninitialized causing a wrong call to zap_vma_ptes(). But that is impossible to happen as a scatterlist must have at least one valid segment. Anyways to avoid more reports from static checkers initializing ret here. Fixes: b12d691e ("i915: fix remap_io_sg to verify the pgprot") Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
James Ausmus <james.ausmus@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210517202117.179303-1-jose.souza@intel.com
-
Simon Rettberg authored
When resetting CACHE_MODE registers, don't enable HiZ Raw Stall Optimization on Ivybridge GT1 and Baytrail, as it causes severe glitches when rendering any kind of 3D accelerated content. This optimization is disabled on these platforms by default according to official documentation from 01.org. Fixes: ef99a60f ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals") BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3081 BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3404 BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3071Reviewed-By:
Manuel Bentele <development@manuel-bentele.de> Signed-off-by:
Simon Rettberg <simon.rettberg@rz.uni-freiburg.de> Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo removed invalid Fixes line] Link: https://patchwork.freedesktop.org/patch/msgid/20210426161124.2b7fd708@dellnichtsogutkiste
-
- 17 May, 2021 1 commit
-
-
Rodrigo Vivi authored
Time to get back in sync... Signed-off-by:
-
- 15 May, 2021 19 commits
-
-
José Roberto de Souza authored
Buffer compression is not usable in A stepping. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Clinton A Taylor <clinton.a.taylor@intel.com> Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com> Signed-off-by:
Clinton Taylor <Clinton.A.Taylor@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Implementation details are in the HSD 22011320316, requiring CD clock to be at least 307MHz to make DC states to work. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-19-matthew.d.roper@intel.com
-
José Roberto de Souza authored
Adding a new hook to ADL-P just to avoid another platform check in gen12lp_init_clock_gating() but also open to it. BSpec: 54369 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
José Roberto de Souza authored
This will allow us to better implement workarounds. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Animesh Manna authored
Respective bit for master or slave to be set for uncompressed bigjoiner in dss_ctl1 register. Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Animesh Manna <animesh.manna@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-16-matthew.d.roper@intel.com
-
Animesh Manna authored
For uncompressed big joiner DSC engine will not be used so will avoid compute config of DSC. Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Animesh Manna authored
No need for checking dsc flag for uncompressed pipe joiner mode validation. Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Mika Kahola authored
Disable loadgen sharing for DP link rate 1.62 GHz and HDMI 5.94 GHz. For all other modes, we can enable loadgen sharing feature. BSpec: 55359 Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Move intel_modeset_all_pipes() to a central place so that we can use it elsewhere as well. No functional changes. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
José Roberto de Souza authored
Alderlake P have modular FIA like TGL but it is always modular in all skus, not like TGL that we had to read a register to check if it is monolithic or modular. BSpec: 55480 BSpec: 50572 Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-11-matthew.d.roper@intel.com
-
José Roberto de Souza authored
When DP_PHY_MODE_STATUS_NOT_SAFE is set, it means that display has the control over the TC phy. The "not safe" naming is confusing using ownership make it easier to read also future platforms will have a new register that does the same job as DP_PHY_MODE_STATUS_NOT_SAFE but with the onwership name. BSpec: 49294 Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
ADL-P has 3 possible refclk frequencies: 19.2MHz, 24MHz and 38.4MHz While we're at it, remove the drm_WARNs. They've never actually helped us catch any problems, but it's very easy to forget to update them properly for new platforms. BSpec: 55409, 49208 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Matt Roper authored
ADL-P further extends the bits in PLANE_WM that represent blocks and lines; we need to extend our masks accordingly. Since these bits are reserved and MBZ on earlier platforms, it's safe to use the larger bitmask on all platforms. Bspec: 50419 Cc: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by:
-
José Roberto de Souza authored
This will allow proper DDI initialization based on vbt information. Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Vandita Kulkarni authored
We need slice height to calculate few RC parameters hence assign slice height first. Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
-
Vandita Kulkarni authored
Support compression BPPs from bpc to uncompressed BPP -1. So far we have 8,10,12 as valid compressed BPPS now the support is extended. Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Vandita Kulkarni authored
Move the platform specific max bpc calculation into intel_dp_dsc_compute_bpp function Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Matt Roper authored
XE_LPD continues to use the same "skylake-style" watermark programming as other recent platforms. The only change to the watermark calculations compared to Display12 is that XE_LPD now allows a maximum of 255 lines vs the old limit of 31. Due to the larger possible lines value, the corresponding bits representing the value in PLANE_WM are also extended, so make sure we read/write enough bits. Let's also take this opportunity to switch over to the REG_FIELD notation. Bspec: 49325 Bspec: 50419 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
-
Matt Roper authored
The DDI naming template for display version 12 went A-C, TC1-TC6. With XE_LPD, that naming scheme for DDI's has now changed to A-E, TC1-TC4. The XE_LPD design keeps the register offsets and bitfields relating to the TC outputs in the same location they were previously. The new "D" and "E" outputs now take the locations that were previously used by TC5 and TC6 outputs, or what we would have considered to be outputs "H" and "I" under the legacy lettering scheme. For the most part everything will just work as long as we initialize the output with the proper 'enum port' value. However we do need to take care to pick the correct AUX channel when parsing the VBT (e.g., a reference to 'AUX D' is actually asking us to use the 8th aux channel, not the fourth). We should also make sure that our encoders and aux channels are named appropriately so that it's easier to correlate driver debug messages with the bspec instructions. v2: - Update handling of TGL_TRANS_CLK_SEL_PORT. (Jose) v3: - Add hpd_pin to handle outputs D and E (Jose) - Fixed conversion of BIOS port to aux ch for TC ports (Jose) Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 12 May, 2021 8 commits
-
-
Umesh Nerlige Ramappa authored
Enable relevant OA formats for ADL_P. Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512042144.2089071-8-matthew.d.roper@intel.com
-
Clinton Taylor authored
Add ADP-P PCH device ID and assign as ADL PCH if found. Previously we would assign the DDC pin map based on the PCH, but it can also change based on the CPU. From Bspec 20124: "The physical port to pin pair mapping are defined in the Bspec per PCH. Mapping can further change based on CPU Si used as CPU and PCH can be mixed and matched". Bspec: 20124 Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
-
Matt Roper authored
If VT-d is active, the memory bandwidth usage of the display is 5% higher. Take this into account when determining whether we can support a display configuration. Bspec: 64631 Cc: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by:
-
Matt Roper authored
Aside from the hardware-managed PG0, XE_LPD has power wells 1-2 and A-D. These power wells should be enabled/disabled according to the following dependency tree (enable top to bottom, disable bottom to top): PG0 | --PG1-- / \ PGA --PG2-- / | \ PGB PGC PGD PWR_WELL_CTL follows the general ICL/TGL design and places PG A-D in the bits that would have been PG 6-9 under the old scheme. PWR_WELL_CTL_{DDI,AUX}'s bit indexing for DDI's A-C and TC1 is the same as TGL, but DDI-D is placed at index 7 (bits 14 & 15). v2: - Squash in LPSP status patch from Uma since it's also a powerwell-specific change. Bspec: 49233 Bspec: 49503 Bspec: 49504 Bspec: 49505 Bspec: 49296 Bspec: 50090 Bspec: 53920 Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:Uma Shankar <uma.shankar@intel.com> Reviewed-by:
-
Matt Roper authored
XE_LPD's plane support is identical to RKL and ADL-S --- 5 universal + 1 cursor with NV12 UV support on planes 1-3 and NV12 Y support on planes 4-5. v2: - Drop the extra 90/270 rotation check in skl_plane_check_fb(); the DRM property code will already prevent userspace from passing us values that weren't advertised. (Lucas) Bspec: 53657 Bspec: 49251 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Matt Roper authored
XE_LPD has new AUX interrupt bits for DDI-D and DDI-E that take the spots that were used by TC5/TC6 on Display12 platforms. While we're at it, let's convert the bit definitions for all TGL+ aux bits over to the modern REG_BIT() notation. v2: - Maintain bit order rather than logical order. (Lucas) - Convert surrounding code to REG_BIT() notation. (Lucas) Bspec: 50064 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Ankit Nautiyal authored
Fix the typo in DPCD caps used for checking SRC CTL mode of HDMI2.1 PCON v2: Corrected Fixes tag (Jani Nikula). v3: Rebased. Fixes: 04b6603d ("drm/i915/display: Configure HDMI2.1 Pcon for FRL only if Src-Ctl mode is available") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: "Ville Syrj_l_" <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by:
Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210511120930.12218-1-ankit.k.nautiyal@intel.com
-
- 11 May, 2021 8 commits
-
-
José Roberto de Souza authored
This workaround requires that VIDEO_DIP_ENABLE_VSC_HSW is never set with PSR. BSpec: 54369 BSpec: 54077 Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210418002126.87882-5-jose.souza@intel.com
-
José Roberto de Souza authored
HSW_TVIDEO_DIP_CTL is read but not used. Signed-off-by:
-
José Roberto de Souza authored
No functional changes in here. Cc: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by:
-
José Roberto de Souza authored
All of this places don't need to intel_psr_enabled() that will lock psr mutex, check state and unlock. Instead it can directly check PSR state in intel_crtc_state, the only place that was not possible was intel_read_dp_vsc_sdp() but since "drm/i915/display: Fill PSR state during hardware configuration read out" it is possible. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
-
José Roberto de Souza authored
So far if we had a mismatch between the state asked and what was programmed in hardware for PSR, this mismatch would go unnoticed. So here adding the PSR to the hardware configuration readout, EDP_PSR_CTL and EDP_PSR2_CTL can't be directly read because its state flips due to other factors like frontbuffer modifications and CRC. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
-
Werner Sembach authored
When encoder validation of a display mode fails, retry with less bandwidth heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups to support 4k60Hz output, which previously failed silently. AMDGPU had nearly the exact same issue. This problem description is therefore copied from my commit message of the AMDGPU patch. On some setups, while the monitor and the gpu support display modes with pixel clocks of up to 600MHz, the link encoder might not. This prevents YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be possible. However, which color mode is used is decided before the link encoder capabilities are checked. This patch fixes the problem by retrying to find a display mode with YCbCr420 enforced and using it, if it is valid. Signed-off-by:
Werner Sembach <wse@tuxedocomputers.com> Signed-off-by:
-
Werner Sembach authored
Couples the decission between RGB and YCbCr420 mode and the check if the port clock can archive the required frequency. Other checks and configuration steps that where previously done in between can also be done before or after. This allows for are cleaner implementation of retrying different color encodings. A slight change in behaviour occurs with this patch: If YCbCr420 is not allowed but display is YCbCr420 only it no longer fails, but just prints an error and tries to fallback on RGB. Signed-off-by:
-
Werner Sembach authored
Moves some checks that later will be performed 2 times to an own function. This avoids duplicate code later on. Signed-off-by:
-
