- 25 Jun, 2016 39 commits
-
-
Jarkko Sakkinen authored
Drop field int_queue from tpm_vendor_specific as it is used only by tpm_tis. Probably all of the fields should be eventually dropped and moved to the private structures of different drivers but it is better to do this one step at a time in order not to break anything. Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
-
Jarkko Sakkinen authored
Fixes: 20e0152393b41 ("tpm: fix crash in tpm_tis deinitialization") Signed-off-by:Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by:
-
Jarkko Sakkinen authored
On my Lenovo x250 the following situation occurs: [18697.813871] tpm_crb MSFT0101:00: can't request region for resource [mem 0xacdff080-0xacdfffff] The mapping of the control area overlaps the mapping of the command buffer. The control area is mapped over page, which is not right. It should mapped over sizeof(struct crb_control_area). Fixing this issue unmasks another issue. Command and response buffers can overlap and they do interleave on this machine. According to the PTP specification the overlapping means that they are mapped to the same buffer. The commit has been also on a Haswell NUC where things worked before applying this fix so that the both code paths for response buffer initialization are tested. Cc: stable@vger.kernel.org Fixes: 1bd047be ("tpm_crb: Use devm_ioremap_resource") Signed-off-by:
-
Christophe Ricard authored
We can get rid of tpm_reg variable in get_burstcount. Signed-off-by:
Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by:
-
Christophe Ricard authored
When st33zp24_spi_acpi_request_resources() gets called we already know that the entries in ->acpi_match_table have matched ACPI ID of the device. In addition spi_device pointer cannot be NULL in any case (otherwise I2C core would not call ->probe() for the driver in the first place). Drop the two useless checks from the driver. Signed-off-by:
-
Christophe Ricard authored
When st33zp24_i2c_acpi_request_resources() gets called we already know that the entries in ->acpi_match_table have matched ACPI ID of the device. In addition I2C client pointer cannot be NULL in any case (otherwise I2C core would not call ->probe() for the driver in the first place). Drop the two useless checks from the driver. Signed-off-by:
-
Jarkko Sakkinen authored
The iomem resource is needed only temporarily so it is better to pass it on instead of storing it permanently. Named the variable as io_res so that the code better documents itself. Signed-off-by:
-
Jarkko Sakkinen authored
rmmod crashes the driver because tpm_chip_unregister() already sets ops to NULL. This commit fixes the issue by moving tpm2_shutdown() to tpm_chip_unregister(). This commit is also cleanup because it removes duplicate code from tpm_crb and tpm_tis to the core. Fixes: 4d3eac5e156a ("tpm: Provide strong locking for device removal") Signed-off-by: -
Jarkko Sakkinen authored
Created a local variable pointing to the INT_ENABLE_x register. The expression clearing INT_ENABLE_x.globalIntEnable is unreadable and hard to modify without surpassing the 80 char boundary. Signed-off-by:
-
Arnd Bergmann authored
A cleanup patch changed the prototype of the regular tpm_bios_log_setup function, but not that of the stub that is used when the TPM is disabled, causing a harmless build warning: drivers/char/tpm/tpm-chip.c: In function 'tpm1_chip_register': drivers/char/tpm/tpm-chip.c:287:38: error: passing argument 1 of 'tpm_bios_log_setup' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] chip->bios_dir = tpm_bios_log_setup(dev_name(&chip->dev)); In file included from ../drivers/char/tpm/tpm-chip.c:30:0: ../drivers/char/tpm/tpm_eventlog.h:83:31: note: expected 'char *' but argument is of type 'const char *' static inline struct dentry **tpm_bios_log_setup(char *name) This changes the stub function to match the normal prototype, avoiding that warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: aca8db8088c3 ("tpm: Get rid of devname") Signed-off-by:
-
Stefan Berger authored
Replace the device number bitmap with IDR. Extend the number of devices we can create to 64k. Since an IDR allows us to associate a pointer with an ID, we use this now to rewrite tpm_chip_find_get() to simply look up the chip pointer by the given device ID. Protect the IDR calls with a mutex. Signed-off-by:
-
Jason Gunthorpe authored
tpm_chip_alloc becomes a typical subsystem allocate call. Signed-off-by:
-
Stefan Berger authored
Now that the tpm core has strong locking around 'ops' it is possible to remove a TPM driver, module and all, even while user space still has things like /dev/tpmX open. For consistency and simplicity, drop the module locking entirely. Signed-off-by:
-
Jason Gunthorpe authored
Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers. Previously the tpm core expected module locking to be enough to ensure that tpm_unregister could not be called during certain times, however that hasn't been sufficient for a long time. Introduce a read/write semaphore around 'ops' so the core can set it to null when unregistering. This provides a strong fence around the driver callbacks, guaranteeing to the driver that no callbacks are running or will run again. For now the ops_lock is placed very high in the call stack, it could be pushed down and made more granular in future if necessary. Signed-off-by:
-
Jason Gunthorpe authored
Now that we have a proper struct device just use dev_name() to access this value instead of keeping two copies. Signed-off-by:
-
Jason Gunthorpe authored
This is a hold over from before the struct device conversion. - All prints should be using &chip->dev, which is the Linux standard. This changes prints to use tpm0 as the device name, not the PnP/etc ID. - The few places involving sysfs/modules that really do need the parent just use chip->dev.parent instead - We no longer need to get_device(pdev) in any places since it is no longer used by any of the code. The kref on the parent is held by the device core during device_add and dropped in device_del Signed-off-by:
-
Christophe RICARD authored
Simplify st33zp24_spi_acpi_request_resources, st33zp24_spi_of_request_resources and st33zp24_spi_request_resources to have the same prototype and using spi_get_drvdata. Signed-off-by:
-
Christophe RICARD authored
Simplify st33zp24_i2c_acpi_request_resources, st33zp24_i2c_of_request_resources and st33zp24_i2c_request_resources to have the same prototype and using i2c_get_clientdata. Signed-off-by:
-
Christophe RICARD authored
Add support for acpi probing. SMO3324 is used for st33zp24. It has been tested with the following acpi node on Minnowboard: Device (TPM1) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "SMO3324") // _HID: Hardware ID Name (_CID, "SMO3324") // _CID: Compatible ID Name (_DDN, "SMO TPM") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { SpiSerialBus (0, PolarityLow, FourWireMode, 8, ControllerInitiated, 4000000, ClockPolarityLow, ClockPhaseFirst, "\\_SB.SPI1", 0x00, ResourceConsumer, ,) GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0001 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0002, } }) Return (SBUF) /* \_SB_.SPI1.TPM1._CRS.SBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: -
Christophe RICARD authored
Add support for acpi probing. SMO3324 is used for st33zp24. It has been tested with the following acpi node on Minnowboard: Device (TPM1) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "SMO3324") // _HID: Hardware ID Name (_CID, "SMO3324") // _CID: Compatible ID Name (_DDN, "SMO TPM") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { I2cSerialBus (0x0013, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.I2C7", 0x00, ResourceConsumer, ,) GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0001 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0002, } }) Return (SBUF) /* \_SB_.I2C7.TPM1._CRS.SBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: -
Christophe RICARD authored
Extend copyright header to 2016 Signed-off-by:
-
Christophe RICARD authored
Add check in st33zp24_spi_evaluate_latency helping to diagnose if the chip is present or in a bad state. Signed-off-by:
-
Christophe RICARD authored
DT headers already define NOOP routines when CONFIG_OF is not defined. [jarkko.sakkinen@linux.intel.com: I tested that the driver compiles without warnings and errors with and without CONFIG_OF flag.] Signed-off-by:
-
Christophe RICARD authored
Remove spi_xfer from st33zp24_spi_phy structure and declare local spi_xfer when needed instead. Signed-off-by:
-
Christophe RICARD authored
An affectation is enough when copying 1 byte. Remove memcpy usage where possible. Signed-off-by:
-
Christophe RICARD authored
Make sure every function name use st33zp24_spi_ prefix. Signed-off-by:
-
Christophe RICARD authored
nbr_dummy_bytes variable could be easily replaced by phy->latency in st33zp24_spi_send and st33zp24_spi_recv. Signed-off-by:
-
Christophe RICARD authored
Simplify st33zp24_spi_acpi_request_resources, st33zp24_spi_of_request_resources and st33zp24_spi_request_resources to have the same prototype and using spi_get_drvdata. Signed-off-by:
-
Christophe RICARD authored
Simplify st33zp24_i2c_acpi_request_resources, st33zp24_i2c_of_request_resources and st33zp24_i2c_request_resources to have the same prototype and using i2c_get_clientdata. Signed-off-by:
-
Christophe RICARD authored
Add support for acpi probing. SMO3324 is used for st33zp24. It has been tested with the following acpi node on Minnowboard: Device (TPM1) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "SMO3324") // _HID: Hardware ID Name (_CID, "SMO3324") // _CID: Compatible ID Name (_DDN, "SMO TPM") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { SpiSerialBus (0, PolarityLow, FourWireMode, 8, ControllerInitiated, 4000000, ClockPolarityLow, ClockPhaseFirst, "\\_SB.SPI1", 0x00, ResourceConsumer, ,) GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0001 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0002, } }) Return (SBUF) /* \_SB_.SPI1.TPM1._CRS.SBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: -
Christophe RICARD authored
Add support for acpi probing. SMO3324 is used for st33zp24. It has been tested with the following acpi node on Minnowboard: Device (TPM1) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "SMO3324") // _HID: Hardware ID Name (_CID, "SMO3324") // _CID: Compatible ID Name (_DDN, "SMO TPM") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { I2cSerialBus (0x0013, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.I2C7", 0x00, ResourceConsumer, ,) GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0001 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0002, } }) Return (SBUF) /* \_SB_.I2C7.TPM1._CRS.SBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: -
Christophe RICARD authored
Extend copyright header to 2016 Signed-off-by:
-
Christophe RICARD authored
Add check in st33zp24_spi_evaluate_latency helping to diagnose if the chip is present or in a bad state. Signed-off-by:
-
Christophe RICARD authored
The core st33zp24 module is useless without either the I2C or the SPI access module. So hide NFC_ST_NCI and select it automatically if either TCG_TIS_ST33ZP24_I2C or TCG_TIS_ST33ZP24_SPI is selected. This avoids presenting TCG_TIS_ST33ZP24 when neither TCG_TIS_ST33ZP24_I2C nor TCG_TIS_ST33ZP24_SPI can be selected. Signed-off-by:
-
Christophe RICARD authored
DT headers already define NOOP routines when CONFIG_OF is not defined. [jarkko.sakkinen@linux.intel.com: I tested that the driver compiles without warnings and errors with and without CONFIG_OF flag.] Signed-off-by:
-
Christophe RICARD authored
Remove spi_xfer from st33zp24_spi_phy structure and declare local spi_xfer when needed instead. Signed-off-by:
-
Christophe RICARD authored
An affectation is enough when copying 1 byte. Remove memcpy usage where possible. Signed-off-by:
-
Christophe RICARD authored
Make sure every function name use st33zp24_spi_ prefix. Signed-off-by:
-
Christophe RICARD authored
nbr_dummy_bytes variable could be easily replaced by phy->latency in st33zp24_spi_send and st33zp24_spi_recv. Signed-off-by:
-
- 14 Jun, 2016 1 commit
-
-
Kees Cook authored
Close the hole where ptrace can change a syscall out from under seccomp. Signed-off-by:Kees Cook <keescook@chromium.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: user-mode-linux-devel@lists.sourceforge.net
-
