- 20 Jun, 2020 40 commits
-
-
Serge Semin authored
[ Upstream commit 6d2e16a3 ] Commit 10021488 ("clocksource: dw_apb_timer_of: use clocksource_of_init") replaced a publicly available driver initialization method with one called by the timer_probe() method available after CLKSRC_OF. In current implementation it traverses all the timers available in the system and calls their initialization methods if corresponding devices were either in dtb or in acpi. But if before the commit any number of available timers would be installed as clockevent and clocksource devices, after that there would be at most two. The rest are just ignored since default case branch doesn't do anything. I don't see a reason of such behaviour, neither the commit message explains it. Moreover this might be wrong if on some platforms these timers might be used for different purpose, as virtually CPU-local clockevent timers and as an independent broadcast timer. So in order to keep the compatibility with the platforms where the order of the timers detection has some meaning, lets add the secondly discovered timer to be of clocksource/sched_clock type, while the very first and the others would provide the clockevents service. Fixes: 10021488 ("clocksource: dw_apb_timer_of: use clocksource_of_init") Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ruSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Serge Semin authored
[ Upstream commit 43dba9f3 ] It's pointless to track the Tx overrun interrupts if Rx-only SPI transfer is issued. Similarly there is no need in handling the Rx overrun/underrun interrupts if Tx-only SPI transfer is executed. So lets unmask the interrupts only if corresponding SPI transactions are implied. Co-developed-by:
Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 3ca676e4 ] If we detect that we recursively entered the debugger we should hack our I/O ops to NULL so that the panic() in the next line won't actually cause another recursion into the debugger. The first line of kgdb_panic() will check this and return. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20200507130644.v4.6.I89de39f68736c9de610e6f241e68d8dbc44bc266@changeidSigned-off-by:
-
Hsin-Yu Chao authored
[ Upstream commit 56b5453a ] Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection with invalid parameter at the first SCO request expecting AG to attempt another SCO request with the use of "safe settings" for given codec, base on section 5.7.1.2 of HFP 1.7 specification. This patch addresses it by adding "Invalid LMP Parameters" (0x1e) to the SCO fallback case. Verified with below log: < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 Handle: 256 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x0380 3-EV3 may not be used 2-EV5 may not be used 3-EV5 may not be used > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Max Slots Change (0x1b) plen 3 Handle: 256 Max slots: 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e) Handle: 0 Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC) Link type: eSCO (0x02) Transmission interval: 0x00 Retransmission window: 0x02 RX packet length: 0 TX packet length: 0 Air mode: Transparent (0x03) < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 Handle: 256 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 8 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x03c8 EV3 may be used 2-EV3 may not be used 3-EV3 may not be used 2-EV5 may not be used 3-EV5 may not be used > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event: Max Slots Change (0x1b) plen 3 Handle: 256 Max slots: 5 > HCI Event: Max Slots Change (0x1b) plen 3 Handle: 256 Max slots: 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Status: Success (0x00) Handle: 257 Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC) Link type: eSCO (0x02) Transmission interval: 0x06 Retransmission window: 0x04 RX packet length: 30 TX packet length: 30 Air mode: Transparent (0x03) Signed-off-by:
Hsin-Yu Chao <hychao@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 3cb97e22 ] Some DMA controller drivers do not tolerate non-zero values in the DMA configuration structures. Zero them to avoid issues with such DMA controller drivers. Even despite above this is a good practice per se. Fixes: 7063c0d9 ("spi/dw_spi: add DMA support") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Feng Tang <feng.tang@intel.com> Cc: Feng Tang <feng.tang@intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Arthur Kiyanovski authored
[ Upstream commit e9a1de37 ] In case the "func" parameter is NULL we now return "-EINVAL". This shouldn't happen in general, but when it does happen, this is the proper way to handle it. We also check func for NULL in the beginning of the function, as there is no reason to do all the work and realize in the end of the function it was useless. Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Julien Thierry authored
[ Upstream commit 7170cf47 ] The .alternatives section can contain entries with no original instructions. Objtool will currently crash when handling such an entry. Just skip that entry, but still give a warning to discourage useless entries. Signed-off-by:
Julien Thierry <jthierry@redhat.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Brad Love authored
[ Upstream commit e955f959 ] Getting the Xtal trim property to check if running is less error prone. Reset if_frequency if state is unknown. Replaces the previous "garbage check". Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Ard Biesheuvel authored
commit e5c399b0 upstream. Commit ea6f3af4 ("ACPI: GED: add support for _Exx / _Lxx handler methods") added a reference to the 'triggering' field of either the normal or the extended ACPI IRQ resource struct, but inadvertently used the wrong pointer in the latter case. Note that both pointers refer to the same union, and the 'triggering' field appears at the same offset in both struct types, so it currently happens to work by accident. But let's fix it nonetheless Fixes: ea6f3af4 ("ACPI: GED: add support for _Exx / _Lxx handler methods") Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit a9e49980 upstream. The fe_status variable s is not initialized meaning it can have any random garbage status. This could be problematic if fe->ops.tune is false as s is not updated by the call to fe->ops.tune() and a subsequent check on the change status will using a garbage value. Fix this by adding FE_NONE to the enum fe_status and initializing s to this. Detected by CoverityScan, CID#112887 ("Uninitialized scalar variable") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Xiaolong Huang authored
commit da2311a6 upstream. Uninitialized Kernel memory can leak to USB devices. Fix this by using kzalloc() instead of kmalloc(). Signed-off-by:
Xiaolong Huang <butterflyhuangxx@gmail.com> Fixes: 7259124e ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c") Cc: linux-stable <stable@vger.kernel.org> # >= v4.19 Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> [bwh: Backported to 4.9: adjust filename, context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Chris Wilson authored
commit f30d3ced upstream. After changing the timing between GTT updates and execution on the GPU, we started seeing sporadic failures on Ironlake. These were narrowed down to being an insufficiently strong enough barrier/delay after updating the GTT and scheduling execution on the GPU. By forcing the uncached read, and adding the missing barrier for the singular insert_page (relocation paths), the sporadic failures go away. Fixes: 983d308c ("agp/intel: Serialise after GTT updates") Fixes: 3497971a ("agp/intel: Flush chipset writes after updating a single PTE") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Andi Shyti <andi.shyti@intel.com> Cc: stable@vger.kernel.org # v4.0+ Link: https://patchwork.freedesktop.org/patch/msgid/20200410083535.25464-1-chris@chris-wilson.co.ukSigned-off-by:
-
Barret Rhoden authored
commit 2ed6edd3 upstream. Under rare circumstances, task_function_call() can repeatedly fail and cause a soft lockup. There is a slight race where the process is no longer running on the cpu we targeted by the time remote_function() runs. The code will simply try again. If we are very unlucky, this will continue to fail, until a watchdog fires. This can happen in a heavily loaded, multi-core virtual machine. Reported-by: syzbot+bb4935a5c09b5ff79940@syzkaller.appspotmail.com Signed-off-by:
Barret Rhoden <brho@google.com> Signed-off-by:
-
OGAWA Hirofumi authored
commit b1b65750 upstream. If FAT length == 0, the image doesn't have any data. And it can be the cause of overlapping the root dir and FAT entries. Also Windows treats it as invalid format. Reported-by: syzbot+6f1624f937d9d6911e2d@syzkaller.appspotmail.com Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/87r1wz8mrd.fsf@mail.parknet.co.jpSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Wang Hai authored
commit dde3c6b7 upstream. syzkaller reports for memory leak when kobject_init_and_add() returns an error in the function sysfs_slab_add() [1] When this happened, the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak. This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. [1] BUG: memory leak unreferenced object 0xffff8880a6d4be88 (size 8): comm "syz-executor.3", pid 946, jiffies 4295772514 (age 18.396s) hex dump (first 8 bytes): 70 69 64 5f 33 00 ff ff pid_3... backtrace: kstrdup+0x35/0x70 mm/util.c:60 kstrdup_const+0x3d/0x50 mm/util.c:82 kvasprintf_const+0x112/0x170 lib/kasprintf.c:48 kobject_set_name_vargs+0x55/0x130 lib/kobject.c:289 kobject_add_varg lib/kobject.c:384 [inline] kobject_init_and_add+0xd8/0x170 lib/kobject.c:473 sysfs_slab_add+0x1d8/0x290 mm/slub.c:5811 __kmem_cache_create+0x50a/0x570 mm/slub.c:4384 create_cache+0x113/0x1e0 mm/slab_common.c:407 kmem_cache_create_usercopy+0x1a1/0x260 mm/slab_common.c:505 kmem_cache_create+0xd/0x10 mm/slab_common.c:564 create_pid_cachep kernel/pid_namespace.c:54 [inline] create_pid_namespace kernel/pid_namespace.c:96 [inline] copy_pid_ns+0x77c/0x8f0 kernel/pid_namespace.c:148 create_new_namespaces+0x26b/0xa30 kernel/nsproxy.c:95 unshare_nsproxy_namespaces+0xa7/0x1e0 kernel/nsproxy.c:229 ksys_unshare+0x3d2/0x770 kernel/fork.c:2969 __do_sys_unshare kernel/fork.c:3037 [inline] __se_sys_unshare kernel/fork.c:3035 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3035 do_syscall_64+0xa1/0x530 arch/x86/entry/common.c:295 Fixes: 80da026a ("mm/slub: fix slab double-free in case of duplicate sysfs filename") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Casey Schaufler authored
commit 84e99e58 upstream. Add barrier to soob. Return -EOVERFLOW if the buffer is exceeded. Suggested-by:
Hillf Danton <hdanton@sina.com> Reported-by: syzbot+bfdd4a2f07be52351350@syzkaller.appspotmail.com Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Signed-off-by:
-
Qiujun Huang authored
commit 2bbcaaee upstream. In ath9k_hif_usb_rx_cb interface number is assumed to be 0. usb_ifnum_to_if(urb->dev, 0) But it isn't always true. The case reported by syzbot: https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com usb 2-1: new high-speed USB device number 2 using dummy_hcd usb 2-1: config 1 has an invalid interface number: 2 but max is 0 usb 2-1: config 1 has no interface number 0 usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0 Call Trace __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 __do_softirq+0x21e/0x950 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com Signed-off-by:
Qiujun Huang <hqjagain@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.comSigned-off-by:
-
Qiujun Huang authored
commit 19d6c375 upstream. Add barrier to accessing the stack array skb_pool. The case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000003d7c1505a2168418@google.com BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline] BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_cb+0xdf6/0xf70 drivers/net/wireless/ath/ath9k/hif_usb.c:666 Write of size 8 at addr ffff8881db309a28 by task swapper/1/0 Call Trace: ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline] ath9k_hif_usb_rx_cb+0xdf6/0xf70 drivers/net/wireless/ath/ath9k/hif_usb.c:666 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1648 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1713 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 Reported-and-tested-by: syzbot+d403396d4df67ad0bd5f@syzkaller.appspotmail.com Signed-off-by:
-
Qiujun Huang authored
commit e4ff08a4 upstream. Write out of slab bounds. We should check epid. The case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000006ac55b05a1c05d72@google.com BUG: KASAN: use-after-free in htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline] BUG: KASAN: use-after-free in ath9k_htc_rx_msg+0xa25/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:443 Write of size 2 at addr ffff8881cea291f0 by task swapper/1/0 Call Trace: htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline] ath9k_htc_rx_msg+0xa25/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:443 ath9k_hif_usb_reg_in_cb+0x1ba/0x630 drivers/net/wireless/ath/ath9k/hif_usb.c:718 __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 Reported-and-tested-by: syzbot+b1c61e5f11be5782f192@syzkaller.appspotmail.com Signed-off-by:
-
Qiujun Huang authored
commit abeaa850 upstream. Free wmi later after cmd urb has been killed, as urb cb will access wmi. the case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000000002fc05a1d61a68@google.com BUG: KASAN: use-after-free in ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215 Read of size 1 at addr ffff8881cef1417c by task swapper/1/0 Call Trace: <IRQ> ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215 ath9k_htc_rx_msg+0x2da/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:459 ath9k_hif_usb_reg_in_cb+0x1ba/0x630 drivers/net/wireless/ath/ath9k/hif_usb.c:718 __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 Reported-and-tested-by: syzbot+5d338854440137ea0fef@syzkaller.appspotmail.com Signed-off-by:
-
Marc Zyngier authored
commit 3204be41 upstream. AArch32 CP1x registers are overlayed on their AArch64 counterparts in the vcpu struct. This leads to an interesting problem as they are stored in their CPU-local format, and thus a CP1x register doesn't "hit" the lower 32bit portion of the AArch64 register on a BE host. To workaround this unfortunate situation, introduce a bias trick in the vcpu_cp1x() accessors which picks the correct half of the 64bit register. Cc: stable@vger.kernel.org Reported-by:
James Morse <james.morse@arm.com> Tested-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Xing Li authored
commit 5816c76d upstream. If a CPU support more than 32bit vmbits (which is true for 64bit CPUs), VPN2_MASK set to fixed 0xffffe000 will lead to a wrong EntryHi in some functions such as _kvm_mips_host_tlb_inv(). The cpu_vmbits definition of 32bit CPU in cpu-features.h is 31, so we still use the old definition. Cc: Stable <stable@vger.kernel.org> Reviewed-by:
Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Signed-off-by:
Xing Li <lixing@loongson.cn> [Huacai: Improve commit messages] Signed-off-by:
Huacai Chen <chenhc@lemote.com> Message-Id: <1590220602-3547-3-git-send-email-chenhc@lemote.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Xing Li authored
commit fe2b73db upstream. The code in decode_config4() of arch/mips/kernel/cpu-probe.c asid_mask = MIPS_ENTRYHI_ASID; if (config4 & MIPS_CONF4_AE) asid_mask |= MIPS_ENTRYHI_ASIDX; set_cpu_asid_mask(c, asid_mask); set asid_mask to cpuinfo->asid_mask. So in order to support variable ASID_MASK, KVM_ENTRYHI_ASID should also be changed to cpu_asid_mask(&boot_cpu_data). Cc: Stable <stable@vger.kernel.org> #4.9+ Reviewed-by:
-
Sean Christopherson authored
commit 2ebac8bb upstream. Consult only the basic exit reason, i.e. bits 15:0 of vmcs.EXIT_REASON, when determining whether a nested VM-Exit should be reflected into L1 or handled by KVM in L0. For better or worse, the switch statement in nested_vmx_exit_reflected() currently defaults to "true", i.e. reflects any nested VM-Exit without dedicated logic. Because the case statements only contain the basic exit reason, any VM-Exit with modifier bits set will be reflected to L1, even if KVM intended to handle it in L0. Practically speaking, this only affects EXIT_REASON_MCE_DURING_VMENTRY, i.e. a #MC that occurs on nested VM-Enter would be incorrectly routed to L1, as "failed VM-Entry" is the only modifier that KVM can currently encounter. The SMM modifiers will never be generated as KVM doesn't support/employ a SMI Transfer Monitor. Ditto for "exit from enclave", as KVM doesn't yet support virtualizing SGX, i.e. it's impossible to enter an enclave in a KVM guest (L1 or L2). Fixes: 644d711a ("KVM: nVMX: Deciding if L0 or L1 should handle an L2 exit") Cc: Jim Mattson <jmattson@google.com> Cc: Xiaoyao Li <xiaoyao.li@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200227174430.26371-1-sean.j.christopherson@intel.com> Signed-off-by:
-
Paolo Bonzini authored
commit 6c0238c4 upstream. Restoring the ASID from the hsave area on VMEXIT is wrong, because its value depends on the handling of TLB flushes. Just skipping the field in copy_vmcb_control_area will do. Cc: stable@vger.kernel.org Signed-off-by:
-
Christophe JAILLET authored
commit 18722d48 upstream. Some memory is vmalloc'ed in the 'w100fb_save_vidmem' function and freed in the 'w100fb_restore_vidmem' function. (these functions are called respectively from the 'suspend' and the 'resume' functions) However, it is also freed in the 'remove' function. In order to avoid a potential double free, set the corresponding pointer to NULL once freed in the 'w100fb_restore_vidmem' function. Fixes: aac51f09 ("[PATCH] w100fb: Rewrite for platform independence") Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Antonino Daplas <adaplas@pol.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: <stable@vger.kernel.org> # v2.6.14+ Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200506181902.193290-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Eric W. Biederman authored
commit ef1548ad upstream. Recently syzbot reported that unmounting proc when there is an ongoing inotify watch on the root directory of proc could result in a use after free when the watch is removed after the unmount of proc when the watcher exits. Commit 69879c01 ("proc: Remove the now unnecessary internal mount of proc") made it easier to unmount proc and allowed syzbot to see the problem, but looking at the code it has been around for a long time. Looking at the code the fsnotify watch should have been removed by fsnotify_sb_delete in generic_shutdown_super. Unfortunately the inode was allocated with new_inode_pseudo instead of new_inode so the inode was not on the sb->s_inodes list. Which prevented fsnotify_unmount_inodes from finding the inode and removing the watch as well as made it so the "VFS: Busy inodes after unmount" warning could not find the inodes to warn about them. Make all of the inodes in proc visible to generic_shutdown_super, and fsnotify_sb_delete by using new_inode instead of new_inode_pseudo. The only functional difference is that new_inode places the inodes on the sb->s_inodes list. I wrote a small test program and I can verify that without changes it can trigger this issue, and by replacing new_inode_pseudo with new_inode the issues goes away. Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/000000000000d788c905a7dfa3f4@google.com Reported-by: syzbot+7d2debdcdb3cb93c1e5e@syzkaller.appspotmail.com Fixes: 0097875b ("proc: Implement /proc/thread-self to point at the directory of the current thread") Fixes: 021ada7d ("procfs: switch /proc/self away from proc_dir_entry") Fixes: 51f0885e ("vfs,proc: guarantee unique inodes in /proc") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Yuxuan Shui authored
commit 520da69d upstream. In ovl_copy_xattr, if all the xattrs to be copied are overlayfs private xattrs, the copy loop will terminate without assigning anything to the error variable, thus returning an uninitialized value. If ovl_copy_xattr is called from ovl_clear_empty, this uninitialized error value is put into a pointer by ERR_PTR(), causing potential invalid memory accesses down the line. This commit initialize error with 0. This is the correct value because when there's no xattr to copy, because all xattrs are private, ovl_copy_xattr should succeed. This bug is discovered with the help of INIT_STACK_ALL and clang. Signed-off-by:
Yuxuan Shui <yshuiv7@gmail.com> Link: https://bugs.chromium.org/p/chromium/issues/detail?id=1050405 Fixes: 0956254a ("ovl: don't copy up opaqueness") Cc: stable@vger.kernel.org # v4.8 Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 9dd277ff ] The BCM2835 SPI driver uses devm_spi_register_controller() on bind. As a consequence, on unbind, __device_release_driver() first invokes bcm2835_spi_remove() before unregistering the SPI controller via devres_release_all(). This order is incorrect: bcm2835_spi_remove() tears down the DMA channels and turns off the SPI controller, including its interrupts and clock. The SPI controller is thus no longer usable. When the SPI controller is subsequently unregistered, it unbinds all its slave devices. If their drivers need to access the SPI bus, e.g. to quiesce their interrupts, unbinding will fail. As a rule, devm_spi_register_controller() must not be used if the ->remove() hook performs teardown steps which shall be performed after unbinding of slaves. Fix by using the non-devm variant spi_register_controller(). Note that the struct spi_controller as well as the driver-private data are not freed until after bcm2835_spi_remove() has finished, so accessing them is safe. Fixes: 247263db ("spi: bcm2835: use devm_spi_register_master()") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v3.13+ Link: https://lore.kernel.org/r/2397dd70cdbe95e0bc4da2b9fca0f31cb94e5aed.1589557526.git.lukas@wunner.deSigned-off-by:
-
Lukas Wunner authored
[ Upstream commit 32e5b572 ] The PXA2xx SPI driver uses devm_spi_register_controller() on bind. As a consequence, on unbind, __device_release_driver() first invokes pxa2xx_spi_remove() before unregistering the SPI controller via devres_release_all(). This order is incorrect: pxa2xx_spi_remove() disables the chip, rendering the SPI bus inaccessible even though the SPI controller is still registered. When the SPI controller is subsequently unregistered, it unbinds all its slave devices. Because their drivers cannot access the SPI bus, e.g. to quiesce interrupts, the slave devices may be left in an improper state. As a rule, devm_spi_register_controller() must not be used if the ->remove() hook performs teardown steps which shall be performed after unregistering the controller and specifically after unbinding of slaves. Fix by reverting to the non-devm variant of spi_register_controller(). An alternative approach would be to use device-managed functions for all steps in pxa2xx_spi_remove(), e.g. by calling devm_add_action_or_reset() on probe. However that approach would add more LoC to the driver and it wouldn't lend itself as well to backporting to stable. The improper use of devm_spi_register_controller() was introduced in 2013 by commit a807fcd0 ("spi: pxa2xx: use devm_spi_register_master()"), but all earlier versions of the driver going back to 2006 were likewise broken because they invoked spi_unregister_master() at the end of pxa2xx_spi_remove(), rather than at the beginning. Fixes: e0c9905e ("[PATCH] SPI: add PXA2xx SSP SPI Driver") Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 84855678 ] When an SPI controller unregisters, it unbinds all its slave devices. For this, their drivers may need to access the SPI bus, e.g. to quiesce interrupts. However since commit ffbbdd21 ("spi: create a message queueing infrastructure"), spi_destroy_queue() is executed before unbinding the slaves. It sets ctlr->running = false, thereby preventing SPI bus access and causing unbinding of slave devices to fail. Fix by unbinding slaves before calling spi_destroy_queue(). Fixes: ffbbdd21 ("spi: create a message queueing infrastructure") Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit ebc37af5 ] The device_for_each_child() doesn't require the returned value to be checked. Thus, drop the dummy variable completely and have no warning anymore: drivers/spi/spi.c: In function ‘spi_unregister_controller’: drivers/spi/spi.c:2480:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] int dummy; ^~~~~ Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit ca8b19d6 ] The Designware SPI driver uses devm_spi_register_controller() on bind. As a consequence, on unbind, __device_release_driver() first invokes dw_spi_remove_host() before unregistering the SPI controller via devres_release_all(). This order is incorrect: dw_spi_remove_host() shuts down the chip, rendering the SPI bus inaccessible even though the SPI controller is still registered. When the SPI controller is subsequently unregistered, it unbinds all its slave devices. Because their drivers cannot access the SPI bus, e.g. to quiesce interrupts, the slave devices may be left in an improper state. As a rule, devm_spi_register_controller() must not be used if the ->remove() hook performs teardown steps which shall be performed after unregistering the controller and specifically after unbinding of slaves. Fix by reverting to the non-devm variant of spi_register_controller(). An alternative approach would be to use device-managed functions for all steps in dw_spi_remove_host(), e.g. by calling devm_add_action_or_reset() on probe. However that approach would add more LoC to the driver and it wouldn't lend itself as well to backporting to stable. Fixes: 04f421e7 ("spi: dw: use managed resources") Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 66b19d76 ] It is possible to get an interrupt as soon as it is requested. dw_spi_irq does spi_controller_get_devdata(master) and expects it to be different than NULL. However, spi_controller_set_devdata() is called after request_irq(), resulting in the following crash: CPU 0 Unable to handle kernel paging request at virtual address 00000030, epc == 8058e09c, ra == 8018ff90 [...] Call Trace: [<8058e09c>] dw_spi_irq+0x8/0x64 [<8018ff90>] __handle_irq_event_percpu+0x70/0x1d4 [<80190128>] handle_irq_event_percpu+0x34/0x8c [<801901c4>] handle_irq_event+0x44/0x80 [<801951a8>] handle_level_irq+0xdc/0x194 [<8018f580>] generic_handle_irq+0x38/0x50 [<804c6924>] ocelot_irq_handler+0x104/0x1c0 Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Anthony Steinhauser authored
[ Upstream commit 4d8df8cb ] Currently, it is possible to enable indirect branch speculation even after it was force-disabled using the PR_SPEC_FORCE_DISABLE option. Moreover, the PR_GET_SPECULATION_CTRL command gives afterwards an incorrect result (force-disabled when it is in fact enabled). This also is inconsistent vs. STIBP and the documention which cleary states that PR_SPEC_FORCE_DISABLE cannot be undone. Fix this by actually enforcing force-disabled indirect branch speculation. PR_SPEC_ENABLE called after PR_SPEC_FORCE_DISABLE now fails with -EPERM as described in the documentation. Fixes: 9137bb27 ("x86/speculation: Add prctl() control for indirect branch speculation") Signed-off-by:
Anthony Steinhauser <asteinhauser@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Anthony Steinhauser authored
[ Upstream commit 21998a35 ] When STIBP is unavailable or enhanced IBRS is available, Linux force-disables the IBPB mitigation of Spectre-BTB even when simultaneous multithreading is disabled. While attempts to enable IBPB using prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, ...) fail with EPERM, the seccomp syscall (or its prctl(PR_SET_SECCOMP, ...) equivalent) which are used e.g. by Chromium or OpenSSH succeed with no errors but the application remains silently vulnerable to cross-process Spectre v2 attacks (classical BTB poisoning). At the same time the SYSFS reporting (/sys/devices/system/cpu/vulnerabilities/spectre_v2) displays that IBPB is conditionally enabled when in fact it is unconditionally disabled. STIBP is useful only when SMT is enabled. When SMT is disabled and STIBP is unavailable, it makes no sense to force-disable also IBPB, because IBPB protects against cross-process Spectre-BTB attacks regardless of the SMT state. At the same time since missing STIBP was only observed on AMD CPUs, AMD does not recommend using STIBP, but recommends using IBPB, so disabling IBPB because of missing STIBP goes directly against AMD's advice: https://developer.amd.com/wp-content/resources/Architecture_Guidelines_Update_Indirect_Branch_Control.pdf Similarly, enhanced IBRS is designed to protect cross-core BTB poisoning and BTB-poisoning attacks from user space against kernel (and BTB-poisoning attacks from guest against hypervisor), it is not designed to prevent cross-process (or cross-VM) BTB poisoning between processes (or VMs) running on the same core. Therefore, even with enhanced IBRS it is necessary to flush the BTB during context-switches, so there is no reason to force disable IBPB when enhanced IBRS is available. Enable the prctl control of IBPB even when STIBP is unavailable or enhanced IBRS is available. Fixes: 7cc765a6 ("x86/speculation: Enable prctl mode for spectre_v2_user") Signed-off-by:
-
Thomas Lendacky authored
[ Upstream commit 20c3a2c3 ] Different AMD processors may have different implementations of STIBP. When STIBP is conditionally enabled, some implementations would benefit from having STIBP always on instead of toggling the STIBP bit through MSR writes. This preference is advertised through a CPUID feature bit. When conditional STIBP support is requested at boot and the CPU advertises STIBP always-on mode as preferred, switch to STIBP "on" support. To show that this transition has occurred, create a new spectre_v2_user_mitigation value and a new spectre_v2_user_strings message. The new mitigation value is used in spectre_v2_user_select_mitigation() to print the new mitigation message as well as to return a new string from stibp_state(). Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Waiman Long authored
[ Upstream commit aa77bfb3 ] STIBP stands for Single Thread Indirect Branch Predictors. The acronym, however, can be easily mis-spelled as STIPB. It is perhaps due to the presence of another related term - IBPB (Indirect Branch Predictor Barrier). Fix the mis-spelling in the code. Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1544039368-9009-1-git-send-email-longman@redhat.comSigned-off-by:
-
Michał Mirosław authored
commit 951e2736 upstream. Prevent SNDRV_PCM_IOCTL_LINK linking stream to itself - the code can't handle it. Fixed commit is not where bug was introduced, but changes the context significantly. Cc: stable@vger.kernel.org Fixes: 0888c321 ("pcm_native: switch to fdget()/fdput()") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/89c4a2487609a0ed6af3ecf01cc972bdc59a7a2d.1591634956.git.mirq-linux@rere.qmqm.plSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Justin Chen authored
commit 4df3bea7 upstream. Currently we set the tx/rx buffer to 0xff when NULL. This causes problems with some spi slaves where 0xff is a valid command. Looking at other drivers, the tx/rx buffer is usually set to 0x00 when NULL. Following this convention solves the issue. Fixes: fa236a7e ("spi: bcm-qspi: Add Broadcom MSPI driver") Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200420190853.45614-6-kdasu.kdev@gmail.comSigned-off-by:
-
