- 29 Aug, 2019 1 commit
-
-
Markus Elfring authored
A null pointer would be passed to a call of the function "kfree" directly after a call of the function "kcalloc" failed at one place. Pass the data structure member "urb" instead for which memory was allocated before (so that this resource will be properly cleaned up). This issue was detected by using the Coccinelle software. Fixes: d571b592 ("media: em28xx: don't use coherent buffer for DMA transfers") Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 26 Aug, 2019 30 commits
-
-
Mauro Carvalho Chehab authored
On 32-bits archs, a signed integer has 31 bits plus on extra bit for signal. Due to that, touching the 32th bit with something like: int bar = 1 << 31; has an undefined behavior in C on 32 bit architectures, as it touches the signal bit. This is warned by cppcheck. Instead, force the numbers to be unsigned, in order to solve this issue. Signed-off-by: -
Mauro Carvalho Chehab authored
As warned by cppcheck: [drivers/media/dvb-frontends/cx24123.c:434]: (error) Shifting signed 32-bit value by 31 bits is undefined behaviour [drivers/media/pci/bt8xx/bttv-input.c:87]: (error) Shifting signed 32-bit value by 31 bits is undefined behaviour [drivers/media/pci/bt8xx/bttv-input.c:98]: (error) Shifting signed 32-bit value by 31 bits is undefined behaviour ... [drivers/media/v4l2-core/v4l2-ioctl.c:1391]: (error) Shifting signed 32-bit value by 31 bits is undefined behaviour There are lots of places where we're doing 1 << 31. That's bad, as, depending on the architecture, this has an undefined behavior. The BIT() macro is already prepared to handle this, so, let's just switch all "1 << number" macros by BIT(number) at the header files with has 1 << 31. Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> # exynos4-is and s3c-camif Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # omap3isp, vsp1, xilinx, wl128x and ipu3 Reviewed-by: Benoit Parrot <bparrot@ti.com> # am437x and ti-vpe Signed-off-by: -
Mauro Carvalho Chehab authored
As pointed by cppcheck: [drivers/media/i2c/ov9650.c:706]: (error) Shifting by a negative value is undefined behaviour [drivers/media/i2c/ov9650.c:707]: (error) Shifting by a negative value is undefined behaviour [drivers/media/i2c/ov9650.c:721]: (error) Shifting by a negative value is undefined behaviour Prevent mangling with gains with invalid values. As pointed by Sylvester, this should never happen in practice, as min value of V4L2_CID_GAIN control is 16 (gain is always >= 16 and m is always >= 0), but it is too hard for a static analyzer to get this, as the logic with validates control min/max is elsewhere inside V4L2 core. Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
While this might not occur in practice, if the device is doing the right thing, it would be teoretically be possible to have both hsync_counter and vsync_counter negatives. If this ever happen, ctrl will be undefined, but the driver will still call: aspeed_video_update(video, VE_CTRL, 0, ctrl); Change the code to prevent this to happen. This was warned by cppcheck: [drivers/media/platform/aspeed-video.c:653]: (error) Uninitialized variable: ctrl Reviewed-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
cppcheck incorrectly produces an error here: [drivers/media/platform/vicodec/vicodec-core.c:1677]: (error) Pointer addition with NULL pointer. While this is actually a false positive, it doesn't hurt to reorder the checks to make the code simpler, handling first the error patch, where no color or alpha components are there. Signed-off-by: -
Mauro Carvalho Chehab authored
It doesn't make any sense to have gcc's stdarg.h included inside the Linux Kernel. Get rid of those includes. Signed-off-by: -
Mauro Carvalho Chehab authored
As I2C and SPI parts of the V4L2 core got split, let's take the chance and solve the CodingStyle issues there, as reported by checkpatch --strict. Signed-off-by: -
Ezequiel Garcia authored
Currently, the i2c and spi subdev creation helpers are calling BUG() when passed a NULL v4l2_device parameter. This makes little sense; simply returning NULL seems more sensible. These two helpers may already return NULL on error, so callers should already be checking for this, or at least be prepared for a NULL result. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
Introduce a new video4linux2 i2c helper, to unregister a subdev. This allows to get rid of yet another ifdef. Signed-off-by:
-
Ezequiel Garcia authored
Introduce a new video4linux2 spi helper, to unregister a subdev. This allows to get rid of some more ifdefs. Signed-off-by:
-
Ezequiel Garcia authored
Separate the i2c helpers to v4l2-i2c.c, in order to get rid of the ifdefery. No functional changes intended, this is just a cosmetic change to organize the code better. Given I2C is a tristate symbol, a hidden boolean symbol is introduced, to make the conditional build easier. Signed-off-by:
-
Ezequiel Garcia authored
Separate the spi helpers to v4l2-spi.c, in order to get rid of the ifdefery. No functional changes intended, this is just a cosmetic change to organize the code better. Signed-off-by:
-
Ezequiel Garcia authored
videodev.ko and v4l2-common.ko driver are built under the same conditions. Therefore, it doesn't make much sense to split them in two different modules. Splitting v4l2-common to its own driver was done many years ago: commit a9254475 Author: Mauro Carvalho Chehab <mchehab@infradead.org> Date: Tue Jan 29 18:32:35 2008 -0300 V4L/DVB (7115): Fix bug #9833: regression when compiling V4L without I2C Back then, the subsystem organization was different and the module split was needed. However, with the current organization, there is no issue compiling V4L2 with I2C as y/m/n. This commit makes v4l2-common part of our V4L2 core driver (videodev.ko). Signed-off-by:
-
Souptick Joarder authored
These codes are commented since v4.2-rc1. If there is no plan to enable the #else part in future, these can be removed forever. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Jae Hyun Yoo authored
It returns '0' even when a failure happens on jpeg buffer allocation so this commit fixes the issue. Signed-off-by:
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by:
Andrew Jeffery <andrew@aj.id.au> Signed-off-by:
-
Jonas Karlman authored
RK3328 SoC has the same decoder IP block as RK3399, lets enable VP8 decoding on RK3328. Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
-
Maciej S. Szmigiero authored
saa7134_i2c_eeprom_md7134_gate() function and the associated comment uses an inverted i2c gate open / closed terminology. Let's fix this. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
-
Maciej S. Szmigiero authored
Medion 7134 has two i2c eeproms on the same i2c bus sharing the same bus addresses: the first one for SAA7134 chip config and the second one behind TDA10046 DVB-T demod chip i2c gate storing its firmware. The TV tuner on this board is not behind this i2c gate. Due to the bus conflict described above, the card PCI SVID / SSID sometimes gets garbled after a reboot, which makes it necessary to specify the card model manually as an insmod option in order for it to be detected reliably. To avoid this, let's just leave the gate permanently closed so the eeprom chips won't clash. The demod firmware load is done with its i2c gate closed anyway so it is not affected by this change. Signed-off-by:
-
Wolfram Sang authored
No need to check the argument of i2c_unregister_device() because the function itself does it. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Wolfram Sang authored
No need to check the argument of i2c_unregister_device() because the function itself does it. Signed-off-by:
-
Colin Ian King authored
Variable retval is initialized to a value that is never read so this assignment is redundant. Clean up the code by removing retval completely and just return the error return from the call to i2c_add_adapter. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Hans de Goede authored
Like a bunch of other MSI laptops the MS-1039 uses a 0c45:627b SN9C201 + OV7660 webcam which is mounted upside down. Add it to the sn9c20x flip_dmi_table to deal with this. Cc: stable@vger.kernel.org Reported-by:
Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Wenwen Wang authored
If an error occurs in this function, no cleanup is executed, leading to memory/resource leaks. To fix this issue, introduce two labels to perform the cleanup work. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
-
Wenwen Wang authored
In fdp1_open(), 'ctx' is allocated through kzalloc(). However, it is not deallocated if v4l2_ctrl_new_std() fails, leading to a memory leak bug. To fix this issue, free 'ctx' before going to the 'done' label. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Wenwen Wang authored
If saa7146_register_device() fails, no cleanup is executed, leading to memory/resource leaks. To fix this issue, perform necessary cleanup work before returning the error. Signed-off-by:
-
Wenwen Wang authored
In cx231xx_load_firmware(), 'p_buffer' is allocated through vmalloc() to hold the firmware. However, after the usage, it is not deallocated, leading to a memory leak bug. Signed-off-by:
-
Wenwen Wang authored
In submit_urbs(), 'cam->sbuf[i].data' is allocated through kmalloc_array(). However, it is not deallocated if the following allocation for urbs fails. To fix this issue, free 'cam->sbuf[i].data' if usb_alloc_urb() fails. Signed-off-by:
-
Philipp Zabel authored
Add a single imx-media mem2mem video device that uses the IPU IC PP (image converter post processing) task for scaling and colorspace conversion. On i.MX6Q/DL SoCs with two IPUs currently only the first IPU is used. The hardware only supports writing to destination buffers up to 1024x1024 pixels in a single pass, arbitrary sizes can be achieved by rendering multiple tiles per frame. [slongerbeam@gmail.com: use ipu_image_convert_adjust(), fix device_run() error handling, add missing media-device header, unregister and remove the mem2mem device in error paths in imx_media_probe_complete() and in imx_media_remove(), updated for sync subdev registration] Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Hans Verkuil authored
If cec_notifier_cec_adap_unregister() is called before cec_unregister_adapter() then everything is OK (and this is the case today). But if it is the other way around, then cec_notifier_unregister() is called first, and that doesn't set n->cec_adap to NULL. So if e.g. cec_notifier_set_phys_addr() is called after cec_notifier_unregister() but before cec_unregister_adapter() then n->cec_adap points to an unregistered and likely deleted cec adapter. So just set n->cec_adap->notifier and n->cec_adap to NULL for rubustness. Eventually cec_notifier_unregister will disappear and this will be simplified substantially. Signed-off-by:
-
Hans Verkuil authored
Check if cec_s_conn_info is called with a valid cec adapter, do nothing if it is invalid. This makes it possible to call this function even if CEC support is disabled in the kernel config. Signed-off-by:
-
- 23 Aug, 2019 4 commits
-
-
Maxime Ripard authored
The older CSI drivers have camera capture interface different from the one in the newer ones. This IP is pretty simple. Some variants (one controller out of two instances on some SoCs) have an ISP embedded, but there's no code that make use of it, so we ignored that part for now. [Sakari Ailus: Wrapped a few long lines, set mbus code using a macro.] Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Maxime Ripard authored
The Makefile and Kconfig for the sun6i CSI driver are included in the main Makefile / KConfig file. Since we're going to add a new CSI driver for an older chip, and the Cedrus driver eventually, it makes more sense to put those in our directory. Signed-off-by:
-
Maxime Ripard authored
The Allwinner A10 CMOS Sensor Interface is a camera capture interface also used in later (A10s, A13, A20, R8 and GR8) SoCs. On some SoCs, like the A10, there's multiple instances of that controller, with one instance supporting more channels and having an ISP. [Sakari Ailus: Add type: object to the endpoint node.] Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Alexandre Kroupski authored
In case of sensor malfunction, stop streaming timeout takes much longer than expected. This is due to conversion of time to jiffies: milliseconds multiplied with HZ (ticks/second) gives out a value of jiffies with 10^3 greater. We need to also divide by 10^3 to obtain the right jiffies value. In other words FRAME_INTERVAL_MILLI_SEC must be in seconds in order to multiply by HZ and get the right jiffies value to add to the current jiffies for the timeout expire time. Fixes: 195ebc43 ("[media] V4L: at91: add Atmel Image Sensor Interface (ISI) support") Signed-off-by:
Alexandre Kroupski <alexandre.kroupski@ingenico.com> Reviewed-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
- 21 Aug, 2019 5 commits
-
-
Maxime Ripard authored
The older Allwinner SoCs have a IR receiver supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Reviewed-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Maxime Ripard authored
The RC controllers have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those. Reviewed-by:
-
Tomas Bortoli authored
The function at issue does not always initialize each byte allocated for 'b' and can therefore leak uninitialized memory to a USB device in the call to usb_bulk_msg() Use kzalloc() instead of kmalloc() Signed-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+0522702e9d67142379f1@syzkaller.appspotmail.com Signed-off-by:
-
Nishka Dasgupta authored
Static structure en_templ, of type dvb_ca_en50221, is not used except to be copied into a local variable. Hence make it const to prevent unintended modification of the original fields. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
-
Nishka Dasgupta authored
The static structure ec168_props, of type dvb_usb_device_properties, is used only once, when it is assigned to field props of the constant structure ec168_driver_info. As this means that ec168_props will never be modified, make it const as well in order to prevent unintended modification of its fields. Issue found with Coccinelle. Signed-off-by:
-
