In file included from ./../include/linux/compiler_types.h:68,
                 from <command-line>:
../include/asm-generic/mmiowb.h: In function ‘mmiowb_set_pending’:
../include/asm-generic/percpu.h:34:38: error: implicit declaration of function ‘smp_processor_id’; did you mean ‘raw_smp_processor_id’? [-Werror=implicit-function-declaration]
 #define my_cpu_offset per_cpu_offset(smp_processor_id())
                                      ^~~~~~~~~~~~~~~~
../include/linux/compiler-gcc.h:58:26: note: in definition of macro ‘RELOC_HIDE’
  (typeof(ptr)) (__ptr + (off));     \
                          ^~~
../include/linux/percpu-defs.h:249:2: note: in expansion of macro ‘SHIFT_PERCPU_PTR’
  SHIFT_PERCPU_PTR(ptr, my_cpu_offset);    \
  ^~~~~~~~~~~~~~~~
../include/asm-generic/percpu.h:34:23: note: in expansion of macro ‘per_cpu_offset’
 #define my_cpu_offset per_cpu_offset(smp_processor_id())
                       ^~~~~~~~~~~~~~
../include/linux/percpu-defs.h:249:24: note: in expansion of macro ‘my_cpu_offset’
  SHIFT_PERCPU_PTR(ptr, my_cpu_offset);    \
                        ^~~~~~~~~~~~~
../include/asm-generic/mmiowb.h:30:26: note: in expansion of macro ‘this_cpu_ptr’
 #define __mmiowb_state() this_cpu_ptr(&__mmiowb_state)
                          ^~~~~~~~~~~~
../include/asm-generic/mmiowb.h:37:28: note: in expansion of macro ‘__mmiowb_state’
  struct mmiowb_state *ms = __mmiowb_state();
                            ^~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv64-none-linux-gnu-ld: mm/page_alloc.o: in function `.L0 ':
page_alloc.c:(.text+0xd34): undefined reference to `__kernel_map_pages'
riscv64-none-linux-gnu-ld: page_alloc.c:(.text+0x104a): undefined reference to `__kernel_map_pages'
riscv64-none-linux-gnu-ld: mm/page_alloc.o: in function `__pageblock_pfn_to_page':
page_alloc.c:(.text+0x145e): undefined reference to `__kernel_map_pages'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

HUGETLBFS only used when MMU enabled, add the dependency.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

DEBUG_VIRTUAL should only used when MMU enabled, add the dependence.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Some drivers use PAGE_SHARED, pgprot_writecombine()/pgprot_device(),
add the defination to fix build error if NOMMU.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Drop static declaration to fix following build error if FRAME_POINTER disabled,
  riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0':
  perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Fix unmet direct dependencies Warning and fix Kconfig indent.

WARNING: unmet direct dependencies detected for POWER_RESET_SYSCON
  Depends on [n]: POWER_RESET [=n] && OF [=y] && HAS_IOMEM [=y]
  Selected by [y]:
  - SOC_VIRT [=y]

WARNING: unmet direct dependencies detected for POWER_RESET_SYSCON_POWEROFF
  Depends on [n]: POWER_RESET [=n] && OF [=y] && HAS_IOMEM [=y]
  Selected by [y]:
  - SOC_VIRT [=y]

WARNING: unmet direct dependencies detected for RTC_DRV_GOLDFISH
  Depends on [n]: RTC_CLASS [=n] && OF [=y] && HAS_IOMEM [=y] && (GOLDFISH [=y] || COMPILE_TEST [=n])
  Selected by [y]:
  - SOC_VIRT [=y]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Selecting PERF_EVENTS without selecting RISCV_BASE_PMU results in a build
error.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[Palmer: commit text]
Fixes: 178e9fc4("perf: riscv: preliminary RISC-V support")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Fixes the following warning detected when running make with W=1,
../arch/riscv/kernel/perf_event.c:150:5: warning: no previous prototype for ‘riscv_map_cache_decode’ [-Wmissing-prototypes]
 int riscv_map_cache_decode(u64 config, unsigned int *type,
     ^~~~~~~~~~~~~~~~~~~~~~
../arch/riscv/kernel/perf_event.c:345:13: warning: no previous prototype for ‘riscv_base_pmu_handle_irq’ [-Wmissing-prototypes]
 irqreturn_t riscv_base_pmu_handle_irq(int irq_num, void *dev)
             ^~~~~~~~~~~~~~~~~~~~~~~~~
../arch/riscv/kernel/perf_event.c:364:6: warning: no previous prototype for ‘release_pmc_hardware’ [-Wmissing-prototypes]
 void release_pmc_hardware(void)
      ^~~~~~~~~~~~~~~~~~~~
../arch/riscv/kernel/perf_event.c:467:12: warning: no previous prototype for ‘init_hw_perf_events’ [-Wmissing-prototypes]
 int __init init_hw_perf_events(void)
            ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Ensure that direct mapping alias is always flushed when changing
     page attributes. The optimization for small ranges failed to do so
     when the virtual address was in the vmalloc or module space.

   - Unbreak the trace event registration for syscalls without arguments
     caused by the refactoring of the SYSCALL_DEFINE0() macro.

   - Move the printk in the TSC deadline timer code to a place where it
     is guaranteed to only be called once during boot and cannot be
     rearmed by clearing warn_once after boot. If it's invoked post boot
     then lockdep rightfully complains about a potential deadlock as the
     calling context is different.

   - A series of fixes for objtool and the ORC unwinder addressing
     variety of small issues:

       - Stack offset tracking for indirect CFAs in objtool ignored
         subsequent pushs and pops

       - Repair the unwind hints in the register clearing entry ASM code

       - Make the unwinding in the low level exit to usermode code stop
         after switching to the trampoline stack. The unwind hint is no
         longer valid and the ORC unwinder emits a warning as it can't
         find the registers anymore.

       - Fix unwind hints in switch_to_asm() and rewind_stack_do_exit()
         which caused objtool to generate bogus ORC data.

       - Prevent unwinder warnings when dumping the stack of a
         non-current task as there is no way to be sure about the
         validity because the dumped stack can be a moving target.

       - Make the ORC unwinder behave the same way as the frame pointer
         unwinder when dumping an inactive tasks stack and do not skip
         the first frame.

       - Prevent ORC unwinding before ORC data has been initialized

       - Immediately terminate unwinding when a unknown ORC entry type
         is found.

       - Prevent premature stop of the unwinder caused by IRET frames.

       - Fix another infinite loop in objtool caused by a negative
         offset which was not catched.

       - Address a few build warnings in the ORC unwinder and add
         missing static/ro_after_init annotations"

* tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES
  x86/apic: Move TSC deadline timer debug printk
  ftrace/x86: Fix trace event registration for syscalls without arguments
  x86/mm/cpa: Flush direct map alias during cpa
  objtool: Fix infinite loop in for_offset_range()
  x86/unwind/orc: Fix premature unwind stoppage due to IRET frames
  x86/unwind/orc: Fix error path for bad ORC entry type
  x86/unwind/orc: Prevent unwinding before ORC initialization
  x86/unwind/orc: Don't skip the first frame for inactive tasks
  x86/unwind: Prevent false warnings for non-current tasks
  x86/unwind/orc: Convert global variables to static
  x86/entry/64: Fix unwind hints in rewind_stack_do_exit()
  x86/entry/64: Fix unwind hints in __switch_to_asm()
  x86/entry/64: Fix unwind hints in kernel exit path
  x86/entry/64: Fix unwind hints in register clearing code
  objtool: Fix stack offset tracking for indirect CFAs

Pull objtool fix from Thomas Gleixner:
 "A single fix for objtool to prevent an infinite loop in the
  jump table search which can be triggered when building the
  kernel with '-ffunction-sections'"

* tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix infinite loop in find_jump_table()

Pull locking fix from Thomas Gleixner:
 "A single fix for the fallout of the recent futex uacess rework.

  With those changes GCC9 fails to analyze arch_futex_atomic_op_inuser()
  correctly and emits a 'maybe unitialized' warning. While we usually
  ignore compiler stupidity the conditional store is pointless anyway
  because the correct case has to store. For the fault case the extra
  store does no harm"

* tag 'locking-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ARM: futex: Address build warning

Pull iommu fixes from Joerg Roedel:

 - Race condition fixes for the AMD IOMMU driver.

   These are five patches fixing two race conditions around
   increase_address_space(). The first race condition was around the
   non-atomic update of the domain page-table root pointer and the
   variable containing the page-table depth (called mode). This is fixed
   now be merging page-table root and mode into one 64-bit field which
   is read/written atomically.

   The second race condition was around updating the page-table root
   pointer and making it public before the hardware caches were flushed.
   This could cause addresses to be mapped and returned to drivers which
   are not reachable by IOMMU hardware yet, causing IO page-faults. This
   is fixed too by adding the necessary flushes before a new page-table
   root is published.

   Related to the race condition fixes these patches also add a missing
   domain_flush_complete() barrier to update_domain() and a fix to bail
   out of the loop which tries to increase the address space when the
   call to increase_address_space() fails.

   Qian was able to trigger the race conditions under high load and
   memory pressure within a few days of testing. He confirmed that he
   has seen no issues anymore with the fixes included here.

 - Fix for a list-handling bug in the VirtIO IOMMU driver.

* tag 'iommu-fixes-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/virtio: Reverse arguments to list_add
  iommu/amd: Do not flush Device Table in iommu_map_page()
  iommu/amd: Update Device Table in increase_address_space()
  iommu/amd: Call domain_flush_complete() in update_domain()
  iommu/amd: Do not loop forever when trying to increase address space
  iommu/amd: Fix race in increase_address_space()/fetch_pte()

Pull block fixes from Jens Axboe:

 - a small series fixing a use-after-free of bdi name (Christoph,Yufen)

 - NVMe fix for a regression with the smaller CQ update (Alexey)

 - NVMe fix for a hang at namespace scanning error recovery (Sagi)

 - fix race with blk-iocost iocg->abs_vdebt updates (Tejun)

* tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block:
  nvme: fix possible hang when ns scanning fails during error recovery
  nvme-pci: fix "slimmer CQ head update"
  bdi: add a ->dev_name field to struct backing_dev_info
  bdi: use bdi_dev_name() to get device name
  bdi: move bdi_dev_name out of line
  vboxsf: don't use the source name in the bdi name
  iocost: protect iocg->abs_vdebt with iocg->waitq.lock

It seems that for whatever reason, gcc-10 ends up not inlining a couple
of functions that used to be inlined before.  Even if they only have one
single callsite - it looks like gcc may have decided that the code was
unlikely, and not worth inlining.

The code generation difference is harmless, but caused a few new section
mismatch errors, since the (now no longer inlined) function wasn't in
the __init section, but called other init functions:

   Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem()
   Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap()
   Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap()

So add the appropriate __init annotation to make modpost not complain.
In both cases there were trivially just a single callsite from another
__init function.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull RISC-V fixes from Palmer Dabbelt:
 "A smattering of fixes and cleanups:

   - Dead code removal.

   - Exporting riscv_cpuid_to_hartid_mask for modules.

   - Per-CPU tracking of ISA features.

   - Setting max_pfn correctly when probing memory.

   - Adding a note to the VDSO so glibc can check the kernel's version
     without a uname().

   - A fix to force the bootloader to initialize the boot spin tables,
     which still get used as a fallback when SBI-0.1 is enabled"

* tag 'riscv-for-linus-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Remove unused code from STRICT_KERNEL_RWX
  riscv: force __cpu_up_ variables to put in data section
  riscv: add Linux note to vdso
  riscv: set max_pfn to the PFN of the last page
  RISC-V: Remove N-extension related defines
  RISC-V: Add bitmap reprensenting ISA features common across CPUs
  RISC-V: Export riscv_cpuid_to_hartid_mask() API

gcc-10 has started warning about conflicting types for a few new
built-in functions, particularly 'free()'.

This results in warnings like:

   crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch]

because the crypto layer had its local freeing functions called
'free()'.

Gcc-10 is in the wrong here, since that function is marked 'static', and
thus there is no chance of confusion with any standard library function
namespace.

But the simplest thing to do is to just use a different name here, and
avoid this gcc mis-feature.

[ Side note: gcc knowing about 'free()' is in itself not the
  mis-feature: the semantics of 'free()' are special enough that a
  compiler can validly do special things when seeing it.

  So the mis-feature here is that gcc thinks that 'free()' is some
  restricted name, and you can't shadow it as a local static function.

  Making the special 'free()' semantics be a function attribute rather
  than tied to the name would be the much better model ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-10 now warns about passing aliasing pointers to functions that take
restricted pointers.

That's actually a great warning, and if we ever start using 'restrict'
in the kernel, it might be quite useful.  But right now we don't, and it
turns out that the only thing this warns about is an idiom where we have
declared a few functions to be "printf-like" (which seems to make gcc
pick up the restricted pointer thing), and then we print to the same
buffer that we also use as an input.

And people do that as an odd concatenation pattern, with code like this:

    #define sysfs_show_gen_prop(buffer, fmt, ...) \
        snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)

where we have 'buffer' as both the destination of the final result, and
as the initial argument.

Yes, it's a bit questionable.  And outside of the kernel, people do have
standard declarations like

    int snprintf( char *restrict buffer, size_t bufsz,
                  const char *restrict format, ... );

where that output buffer is marked as a restrict pointer that cannot
alias with any other arguments.

But in the context of the kernel, that 'use snprintf() to concatenate to
the end result' does work, and the pattern shows up in multiple places.
And we have not marked our own version of snprintf() as taking restrict
pointers, so the warning is incorrect for now, and gcc picks it up on
its own.

If we do start using 'restrict' in the kernel (and it might be a good
idea if people find places where it matters), we'll need to figure out
how to avoid this issue for snprintf and friends.  But in the meantime,
this warning is not useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the final array bounds warning removal for gcc-10 for now.

Again, the warning is good, and we should re-enable all these warnings
when we have converted all the legacy array declaration cases to
flexible arrays. But in the meantime, it's just noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the controller is reconnecting, the host fails I/O and admin
commands as the host cannot reach the controller. ns scanning may
revalidate namespaces during that period and it is wrong to remove
namespaces due to these failures as we may hang (see 205da243).

One command that may fail is nvme_identify_ns_descs. Since we return
success due to having ns identify descriptor list optional, we continue
to compare ns identifiers in nvme_revalidate_disk, obviously fail and
return -ENODEV to nvme_validate_ns, which will remove the namespace.

Exactly what we don't want to happen.

Fixes: 22802bf7 ("nvme: Namepace identification descriptor list is optional")
Tested-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pre-incrementing ->cq_head can't be done in memory because OOB value
can be observed by another context.

This devalues space savings compared to original code :-\

	$ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux
	add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-32 (-32)
	Function                                     old     new   delta
	nvme_poll_irqdisable                         464     456      -8
	nvme_poll                                    455     447      -8
	nvme_irq                                     388     380      -8
	nvme_dev_disable                             955     947      -8

But the code is minimal now: one read for head, one read for q_depth,
one increment, one comparison, single instruction phase bit update and
one write for new head.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Fixes: e2a366a4 ("nvme-pci: slimmer CQ head update")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Cache a copy of the name for the life time of the backing_dev_info
structure so that we can reference it even after unregistering.

Fixes: 68f23b89 ("memcg: fix a crash in wb_workfn when a device disappears")
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use the common interface bdi_dev_name() to get device name.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Add missing <linux/backing-dev.h> include BFQ
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is another fine warning, related to the 'zero-length-bounds' one,
but hitting the same historical code in the kernel.

Because C didn't historically support flexible array members, we have
code that instead uses a one-sized array, the same way we have cases of
zero-sized arrays.

The one-sized arrays come from either not wanting to use the gcc
zero-sized array extension, or from a slight convenience-feature, where
particularly for strings, the size of the structure now includes the
allocation for the final NUL character.

So with a "char name[1];" at the end of a structure, you can do things
like

       v = my_malloc(sizeof(struct vendor) + strlen(name));

and avoid the "+1" for the terminator.

Yes, the modern way to do that is with a flexible array, and using
'offsetof()' instead of 'sizeof()', and adding the "+1" by hand.  That
also technically gets the size "more correct" in that it avoids any
alignment (and thus padding) issues, but this is another long-term
cleanup thing that will not happen for 5.7.

So disable the warning for now, even though it's potentially quite
useful.  Having a slew of warnings that then hide more urgent new issues
is not an improvement.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a fine warning, but we still have a number of zero-length arrays
in the kernel that come from the traditional gcc extension.  Yes, they
are getting converted to flexible arrays, but in the meantime the gcc-10
warning about zero-length bounds is very verbose, and is hiding other
issues.

I missed one actual build failure because it was hidden among hundreds
of lines of warning.  Thankfully I caught it on the second go before
pushing things out, but it convinced me that I really need to disable
the new warnings for now.

We'll hopefully be all done with our conversion to flexible arrays in
the not too distant future, and we can then re-enable this warning.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have some rather random rules about when we accept the
"maybe-initialized" warnings, and when we don't.

For example, we consider it unreliable for gcc versions < 4.9, but also
if -O3 is enabled, or if optimizing for size.  And then various kernel
config options disabled it, because they know that they trigger that
warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES).

And now gcc-10 seems to be introducing a lot of those warnings too, so
it falls under the same heading as 4.9 did.

At the same time, we have a very straightforward way to _enable_ that
warning when wanted: use "W=2" to enable more warnings.

So stop playing these ad-hoc games, and just disable that warning by
default, with the known and straight-forward "if you want to work on the
extra compiler warnings, use W=123".

Would it be great to have code that is always so obvious that it never
confuses the compiler whether a variable is used initialized or not?
Yes, it would.  In a perfect world, the compilers would be smarter, and
our source code would be simpler.

That's currently not the world we live in, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull io_uring fixes from Jens Axboe:

 - Fix finish_wait() balancing in file cancelation (Xiaoguang)

 - Ensure early cleanup of resources in ring map failure (Xiaoguang)

 - Ensure IORING_OP_SLICE does the right file mode checks (Pavel)

 - Remove file opening from openat/openat2/statx, it's not needed and
   messes with O_PATH

* tag 'io_uring-5.7-2020-05-08' of git://git.kernel.dk/linux-block:
  io_uring: don't use 'fd' for openat/openat2/statx
  splice: move f_mode checks to do_{splice,tee}()
  io_uring: handle -EFAULT properly in io_uring_setup()
  io_uring: fix mismatched finish_wait() calls in io_uring_cancel_files()

Pull SCSI fixes from James Bottomley:
 "Four minor fixes, all in drivers (qla2xxx, ibmvfc, ibmvscsi)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvscsi: Fix WARN_ON during event pool release
  scsi: ibmvfc: Don't send implicit logouts prior to NPIV login
  scsi: qla2xxx: Delete all sessions before unregister local nvme port
  scsi: qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV

Pull ceph fixes from Ilya Dryomov:
 "Fixes for an endianness handling bug that prevented mounts on
  big-endian arches, a spammy log message and a couple error paths.

  Also included a MAINTAINERS update"

* tag 'ceph-for-5.7-rc5' of git://github.com/ceph/ceph-client:
  ceph: demote quotarealm lookup warning to a debug message
  MAINTAINERS: remove myself as ceph co-maintainer
  ceph: fix double unlock in handle_cap_export()
  ceph: fix special error code in ceph_try_get_caps()
  ceph: fix endianness bug when handling MDS session feature bits

A misconfigured cephx can easily result in having the kernel client
flooding the logs with:

  ceph: Can't lookup inode 1 (err: -13)

Change this message to debug level.

Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/44546Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Pull char/misc driver fixes from Greg KH:
 "Here are some small driver fixes for 5.7-rc5 that resolve a number of
  minor reported issues:

   - mhi bus driver fixes found as people actually use the code

   - phy driver fixes and compat string additions

   - most driver fix due to link order changing when the core moved out
     of staging

   - mei driver fix

   - interconnect build warning fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  bus: mhi: core: Fix channel device name conflict
  bus: mhi: core: Fix typo in comment
  bus: mhi: core: Offload register accesses to the controller
  bus: mhi: core: Remove link_status() callback
  bus: mhi: core: Make sure to powerdown if mhi_sync_power_up fails
  bus: mhi: Fix parsing of mhi_flags
  mei: me: disable mei interface on LBG servers.
  phy: qualcomm: usb-hs-28nm: Prepare clocks in init
  MAINTAINERS: Add Vinod Koul as Generic PHY co-maintainer
  interconnect: qcom: Move the static keyword to the front of declaration
  most: core: use function subsys_initcall()
  bus: mhi: core: Fix a NULL vs IS_ERR check in mhi_create_devices()
  phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string
  phy: tegra: Select USB_COMMON for usb_get_maximum_speed()

Pull driver core fixes from Greg KH:
 "Here are a number of small driver core fixes for 5.7-rc5 to resolve a
  bunch of reported issues with the current tree.

  Biggest here are the reverts and patches from John Stultz to resolve a
  bunch of deferred probe regressions we have been seeing in 5.7-rc
  right now.

  Along with those are some other smaller fixes:

   - coredump crash fix

   - devlink fix for when permissive mode was enabled

   - amba and platform device dma_parms fixes

   - component error silenced for when deferred probe happens

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  regulator: Revert "Use driver_deferred_probe_timeout for regulator_init_complete_work"
  driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires
  driver core: Use dev_warn() instead of dev_WARN() for deferred_probe_timeout warnings
  driver core: Revert default driver_deferred_probe_timeout value to 0
  component: Silence bind error on -EPROBE_DEFER
  driver core: Fix handling of fw_devlink=permissive
  coredump: fix crash when umh is disabled
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices

Pull staging driver fixes from Greg KH:
 "Here are three small driver fixes for 5.7-rc5.

  Two of these are documentation fixes:

   - MAINTAINERS update due to removed driver

   - removing Wolfram from the ks7010 driver TODO file

  The other patch is a real fix:

   - fix gasket driver to proper check the return value of a call

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: gasket: Check the return value of gasket_get_bar_index()
  staging: ks7010: remove me from CC list
  MAINTAINERS: remove entry after hp100 driver removal

Pull tty/serial fixes from Greg KH:
 "Here are three small TTY/Serial/VT fixes for 5.7-rc5:

   - revert for the bcm63xx driver "fix" that was incorrect

   - vt unicode console bugfix

   - xilinx_uartps console driver fix

  All of these have been in linux next with no reported issues"

* tag 'tty-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: xilinx_uartps: Fix missing id assignment to the console
  vt: fix unicode console freeing with a common interface
  Revert "tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart"

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.7-rc5 to resolve some reported
  issues:

   - syzbot found problems fixed

   - usbfs dma mapping fix

   - typec bugfixs

   - chipidea bugfix

   - usb4/thunderbolt fix

   - new device ids/quirks

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: chipidea: msm: Ensure proper controller reset using role switch API
  usb: typec: mux: intel: Handle alt mode HPD_HIGH
  usb: usbfs: correct kernel->user page attribute mismatch
  usb: typec: intel_pmc_mux: Fix the property names
  USB: core: Fix misleading driver bug report
  USB: serial: qcserial: Add DW5816e support
  USB: uas: add quirk for LaCie 2Big Quadra
  thunderbolt: Check return value of tb_sw_read() in usb4_switch_op()
  USB: serial: garmin_gps: add sanity checking for data length

Pull drm fixes from Dave Airlie:
 "Another pretty normal week. I didn't get any i915 fixes yet, so next
  week I'd expect double the usual i915, but otherwise a bunch of amdgpu
  and some scattered other fixes.

  hdcp:
   - fix HDCP regression

  amdgpu:
   - Runtime PM fixes
   - DC fix for PPC
   - Misc DC fixes

  virtio:
   - fix context ordering issue

  sun4i:
   - old gcc warning fix

  ingenic-drm:
   - missing module support"

* tag 'drm-fixes-2020-05-08' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Prevent dpcd reads with passive dongles
  drm/amd/display: fix counter in wait_for_no_pipes_pending
  drm/amd/display: Update DCN2.1 DV Code Revision
  drm: Fix HDCP failures when SRM fw is missing
  sun6i: dsi: fix gcc-4.8
  drm: ingenic-drm: add MODULE_DEVICE_TABLE
  drm/virtio: create context before RESOURCE_CREATE_2D in 3D mode
  drm/amd/display: work around fp code being emitted outside of DC_FP_START/END
  drm/amdgpu/dc: Use WARN_ON_ONCE for ASSERT
  drm/amdgpu: drop redundant cg/pg ungate on runpm enter
  drm/amdgpu: move kfd suspend after ip_suspend_phase1

Merge misc fixes from Andrew Morton:
 "14 fixes and one selftest to verify the ipc fixes herein"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: limit boost_watermark on small zones
  ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST
  mm/vmscan: remove unnecessary argument description of isolate_lru_pages()
  epoll: atomically remove wait entry on wake up
  kselftests: introduce new epoll60 testcase for catching lost wakeups
  percpu: make pcpu_alloc() aware of current gfp context
  mm/slub: fix incorrect interpretation of s->offset
  scripts/gdb: repair rb_first() and rb_last()
  eventpoll: fix missing wakeup for ovflist in ep_poll_callback
  arch/x86/kvm/svm/sev.c: change flag passed to GUP fast in sev_pin_memory()
  scripts/decodecode: fix trapping instruction formatting
  kernel/kcov.c: fix typos in kcov_remote_start documentation
  mm/page_alloc: fix watchdog soft lockups during set_zone_contiguous()
  mm, memcg: fix error return value of mem_cgroup_css_alloc()
  ipc/mqueue.c: change __do_notify() to bypass check_kill_permission()

Elsewhere in the file, there is a list_for_each_entry with
&vdev->resv_regions as the second argument, suggesting that
&vdev->resv_regions is the list head.  So exchange the
arguments on the list_add call to put the list head in the
second argument.

Fixes: 2a5a3148 ("iommu/virtio: Add probe request")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/1588704467-13431-1-git-send-email-Julia.Lawall@inria.frSigned-off-by: Joerg Roedel <jroedel@suse.de>

A few minor fixes for an ordering issue in virtio, an (old) gcc warning
in sun4i, a probe issue in ingenic-drm and a regression in the HDCP
support.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507160130.id64niqgf5wsha4u@gilmour.lan