- 19 Oct, 2004 1 commit
-
-
Russell King authored
This allows us to adapt the FCR for each port type in a much more flexible way, and allows us to set the transmit trigger levels.
-
- 18 Oct, 2004 39 commits
-
-
Ingo Molnar authored
This patch fixes all the preempt-after-task->state-is-TASK_DEAD problems we had. Right now, the moment procfs does a down() that sleeps in proc_pid_flush() [it could] our TASK_DEAD state is zapped and we might be back to TASK_RUNNING to and we trigger this assert: schedule(); BUG(); /* Avoid "noreturn function does return". */ for (;;) ; I have split out TASK_ZOMBIE and TASK_DEAD into a separate p->exit_state field, to allow the detaching of exit-signal/parent/wait-handling from descheduling a dead task. Dead-task freeing is done via PF_DEAD. Tested the patch on x86 SMP and UP, but all architectures should work fine. Signed-off-by:Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
This patch fixes an interaction between the numa=fake=<domains> feature, the domain setup code and cpu_siblings_map[]. The bug leads to a bootup crash when using numa=fake=2 on a 2-way/4-way SMP+HT box. When SCHED_SMT is turned on the domains-setup code relies on siblings not spanning multiple domains (which makes perfect sense). But numa=fake=2 creates an assymetric 1101/0010 splitup between CPUs, which results in two siblings being on different nodes. The patch adds a check_siblings_map() function that checks the sibling maps and fixes them up if they violate this rule. (it also prints a warning in that case.) The patch also turns SCHED_DOMAIN_DEBUG back on - had this been enabled we'd have noticed this bug much earlier. From: Badari Pulavarty <pbadari@us.ibm.com> arch/x86_64/mm/numa.c: In function `numa_setup': arch/x86_64/mm/numa.c:332: error: `numa_fake' undeclared (first use in this function) arch/x86_64/mm/numa.c:332: error: (Each undeclared identifier is reported only once arch/x86_64/mm/numa.c:332: error: for each function it appears in.) Signed-off-by:
-
Matthew Dobson authored
NODE_BALANCE_RATE is defined all over the place, but used nowhere. Let's remove it. Signed-off-by:
-
Matthew Dobson authored
Here's yet another version of a patch to implement per-arch SD_*_INITs. This follows the same basic idea of my last patch, but 1) defines an arch-specific SD_NODE_INIT for the 4 NUMA arches (i386, x86_64, IA64 & PPC64), 2) defines *default* SD_CPU_INIT & SD_SIBLING_INIT for *all* arches, with the possibility of them being overridden by simply defining an arch-specific version in include/asm/topology.h. The motivation behind the third version of this patch is that Martin feels that there should be no "default" NUMA initializer because NUMA characteristics are *very* arch/platform specific, and hence a "default" NUMA initializer can only lead to confusion. I agree with most of that, but don't quite see as much harm in having a default as he does. Nevertheless, to keep him quiet, I've run up this version of the patch. Martin, please run this through your magic test suite and make sure I didn't break anything trivial. Signed-off-by:
-
Peter Williams authored
Problem: In the function try_to_wake_up(), when the runqueue's nr_uninterruptible field is decremented it's possible (on SMP systems) that the pointer no longer points to the runqueue that the task being woken was on when it went to sleep. This would cause the wrong runqueue's field to be decremented and the correct one tp remain unchanged. Fix: Save a pointer to the old runqueue at the beginning of the function and use it when decrementing nr_uninterruptible. Signed-off-by:
Peter Williams <pwil3058@bigpond.net.au> Signed-off-by:
-
Andrew Morton authored
Better debugging output when the CPU scheduler detects atomicity errors. Signed-off-by:
-
Nick Piggin authored
Still having some trouble with ia64 domain setup on the Altixes. Jesse hasn't had much time to look into it, and I'm lacking an Altix, so I'm not sure if this is right or not... Anyway, it again does the right thing on the NUMAQ, and fixes some real bugs, so can you include it please? * Increase SD_NODES_PER_DOMAIN to 6 from 4 to better match Altix's topology. A setting of 4 will include this node, the other one in the brick, and the 2 nodes in the next closest brick, while 6 will catch 2 other bricks. Probably it could be increased even more. * Work correctly with sparse and not completely full node maps. * Nasty typo fixed in find_next_best_node: - val = node_distance(node, i); + val = node_distance(node, n); * Ensure all nodes are themselves a member of their numa balancing domain. This is more a precaution against creative implementations of node_distance.. but it makes the setup easier to verify without having to look at a table of node_distance's, which is possibly generated at runtime. So again, I'm not too sure if this will fix the Altix setup or not. But if you do a release, it will surely be less broken than it was before. Signed-off-by:
-
Nick Piggin authored
Use CPU_DOWN_FAILED notifier in the sched-domains hotplug code. This goes with 4/8 "integrate cpu hotplug and sched domains" Signed-off-by:
Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Nick Piggin authored
Introduce CPU_DOWN_FAILED notifier, so we can cope with a failure after a CPU_DOWN_PREPARE notice. This fixes 3/8 "add CPU_DOWN_PREPARE notifier" to be useful Signed-off-by:
-
Nick Piggin authored
Actually turn on SD_LOAD_BALANCE for the regular domains. Introduced by 5/8 "sched add load balance flag". Signed-off-by:
-
Nick Piggin authored
Fix an oops in the domain debug code when isolated CPUs are specified. Introduced by 5/8 "sched add load balance flag" Signed-off-by:
-
Nick Piggin authored
Implement disjoint NUMA domain setup for IA64 architecture. Most of the code was what was ripped out of kernel/sched.c, which was written by Jesse Barnes <jbarnes@sgi.com>. I fixed up the tricky NUMA groups initialistion. Signed-off-by:
-
Nick Piggin authored
Allow sched domain setup to be overridden by arch code. This functionality is needed again. From: Paul Jackson <pj@sgi.com> Builds of 2.6.9-rc1-mm5 ia64 NUMA configs fail, with many complaints that SD_NODE_INIT is defined twice, in asm/processor.h and linux/sched.h. I guess that the preprocessor conditionals were wrong when Nick added the per-arch override ability again of SD_NODE_INIT were wrong. At least this change lets me rebuild ia64 again. Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
-
Nick Piggin authored
Remove the disjoint NUMA domains setup code. It was broken. Signed-off-by:
-
Nick Piggin authored
Introduce SD_LOAD_BALANCE flag for domains where we don't want to do load balancing (so we don't have to set up meaningless spans and groups). Use this for the initial dummy domain, and just leave isolated CPUs on the dummy domain. Signed-off-by:
-
Andrew Morton authored
kernel/sched.c:4114: warning: `arch_destroy_sched_domains' defined but not used Signed-off-by:
-
Nick Piggin authored
Register a cpu hotplug notifier which reinitializes the scheduler domains hierarchy. The notifier temporarily attaches all running cpus to a "dummy" domain (like we currently do during boot) to avoid balancing. It then calls arch_init_sched_domains which rebuilds the "real" domains and reattaches the cpus to them. Also change __init attributes to __devinit where necessary. Signed-off-by:
Nathan Lynch <nathanl@austin.ibm.com> Alterations from Nick Piggin: * Detach all domains in CPU_UP|DOWN_PREPARE notifiers. Reinitialise and reattach in CPU_ONLINE|DEAD|UP_CANCELED. This ensures the domains as seen from the scheduler won't become out of synch with the cpu_online_map. * This allows us to remove runtime cpu_online verifications. Do that. * Dummy domains are __devinitdata. * Remove the hackery in arch_init_sched_domains to work around the fact that the domains used to work with cpu_possible maps, but node_to_cpumask returned a cpu_online map. Signed-off-by:
-
Nick Piggin authored
Add a CPU_DOWN_PREPARE hotplug CPU notifier. This is needed so we can dettach all sched-domains before a CPU goes down, thus we can build domains from online cpumasks, and not have to check for the possibility of a CPU coming up or going down. Signed-off-by:
-
Nick Piggin authored
The following patches properly intergrate sched domains and cpu hotplug (using Nathan's code), by having sched-domains *always* only represent online CPUs, and having hotplug notifier to keep them up to date. Then tackle Jesse's domain setup problem: the disjoint top-level domains were completely broken. The group-list builder thingy simply can't handle distinct sets of groups containing the same CPUs. The code is ugly and specific enough that I'm re-introducing the arch overridable domains. I doubt we'll get a proliferation of implementations, because the current generic code can do the job for everyone but SGI. I'd rather take a look at it again down the track if we need to rather than try to shoehorn this into the generic code. Nathan and I have tested the hotplug work. He's happy with it. I've tested the disjoint domain stuff (copied it to i386 for the test), and it does the right thing on the NUMAQ. I've asked Jesse to test it as well, but it should be fine - maybe just help me out and run a test compile on ia64 ;) This really gets sched domains into much better shape. Without further ado, the patches. This patch: Make a definition static and slightly sanitize ifdefs. Signed-off-by:
-
Vladimir Grouzdev authored
The xtime value may become incorrect when the update_wall_time(ticks) function is called with "ticks" > 1. In such a case, the xtime variable is updated multiple times inside the loop but it is normalized only once outside of the loop. This bug was reported at: http://bugme.osdl.org/show_bug.cgi?id=3403Signed-off-by:
-
Jeff Mahoney authored
This patch fixes several missing reiserfs_write_unlock() calls on error paths not introduced by reiserfs-io-error-handling.diff Signed-off-by:
Jeff Mahoney <jeffm@novell.com> Signed-off-by:
-
Jeff Mahoney authored
This patch allows ReiserFS to handle I/O errors in the journal (or journal flush) where it would have previously panicked. The new behavior is to mark the filesystem read-only, disallow new transactions to be started, and to allow existing transactions to complete (though not to commit). The resultant filesystem can be safely umounted, and checked via normal mechanisms. As it is a journaling filesystem, the filesystem itself will be in a similar state to the power being cut to the machine, once umounted. Signed-off-by:
-
Jeff Mahoney authored
This patch cleans up fs/reiserfs/journal.c such that repeated uses of SB_JOURNAL(p_s_sb) are removed in favor of a local journal variable. The compiler won't care, and it makes the code much easier to read. Signed-off-by:
-
Jeff Mahoney authored
This patch cleans up ReiserFS's use of buffer head flags. All direct access of BH_* are made into macro calls, and all reiserfs-specific BH_* macro implementations have been removed and replaced with the BUFFER_FNS implementations found in linux/buffer_head.h Signed-off-by:
-
Gerald Schaefer authored
Add support to read z/VM monitor records. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Eric Rossman authored
crypto driver changes: - Add support for zero-pad and crypto express II (CEX2C). Signed-off-by:
-
Stefan Weinhuber authored
Add an interface to read from the z/VM recording system services. Signed-off-by:
-
Arnd Bergmann authored
Add support for z/VM watchdog timer. Signed-off-by:
-
Martin Schwidefsky authored
From: Frank Pavlic <pavlic@de.ibm.com> From: Thomas Spatzier <tspat@de.ibm.com> qeth network driver changes: - Add Layer 2 support for OSA-Express. Signed-off-by:
-
Andreas Herrmann authored
zfcp host adapter change: - Return -EIO if wait_event_interruptible_timeout was interrupted. - Reduce stack uage of zfcp_cfdc_dev_ioctl. - Make zfcp_sg_list_[alloc,free] more consistent. - Store driver version to zfcp_data structure. - Add missing FSF states and make corresponding log messages consistent. - Always wait for completion in zfcp_scsi_command_sync. - Add Andreas to authors list. - Add timeout for cfdc upload/download. - Add support for temporary units (units not registered to the scsi stack). - Allow sending of ELS commands to ports by their d_id. - Increase port refcount while link test is running. Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Since people are used to doing "make linux ARCH=um" and to use "linux" as the kernel image, make it be an hard link to vmlinux. This should hurt the less possible the users (actually nothing) while not slowing down the build. Acked-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it> Signed-off-by:
-
Hirokazu Takata authored
Here is a patch to fix a compile error of m32r-sio.c. * include/asm-m32r/termbits.h: - Add CTVB definition. This modification is derived from new-serial-flow-control.patch; "[Patch] new serial flow control" (Oct. 4, 2004) http://www.uwsg.iu.edu/hypermail/linux/kernel/0410.0/0853.htmlSigned-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Hirokazu Takata authored
Here is a patch to update arch/m32r/mm/fault.c in order to fix a compile error of -mm kernel for m32r. * arch/m32r/mm/fault.c: - Add the third parameter of expand_stack(). This modification is derived from enforce-a-gap-between-heap-and-stack.patch; "heap-stack-gap for 2.6" (Sep. 25, 2004) http://www.uwsg.iu.edu/hypermail/linux/kernel/0409.3/0435.htmlSigned-off-by:
-
Hirokazu Takata authored
This patch fixes a sys_tas system call for m32r. - This patch fixes an Oops at sys_tas() in case CONFIG_SMP && CONFIG_PREEMPT. > Unable to handle kernel paging request at virtual address XXXXXXXX It is because a page fault happens at the spin_locked region in sys_tas() and in_atomic() checks preempt_count, but spin_lock() already counts up the preemt_count. arch/m32r/kernel/sys_m32r.c: 32 /* 33 * sys_tas() - test-and-set 34 * linuxthreads testing version 35 */ 36 #ifndef CONFIG_SMP 37 asmlinkage int sys_tas(int *addr) 38 { 39 int oldval; 40 unsigned long flags; 41 42 if (!access_ok(VERIFY_WRITE, addr, sizeof (int))) 43 return -EFAULT; 44 local_irq_save(flags); 45 oldval = *addr; 46 *addr = 1; 47 local_irq_restore(flags); 48 return oldval; 49 } 50 #else /* CONFIG_SMP */ 51 #include <linux/spinlock.h> 52 53 static spinlock_t tas_lock = SPIN_LOCK_UNLOCKED; 54 55 asmlinkage int sys_tas(int *addr) 56 { 57 int oldval; 58 59 if (!access_ok(VERIFY_WRITE, addr, sizeof (int))) 60 return -EFAULT; 61 62 spin_lock(&tas_lock); 63 oldval = *addr; /* <<< ATTENTION >>> * A page fault may happen here, because "addr" points an * user-space area. */ 64 *addr = 1; 65 spin_unlock(&tas_lock); 66 67 return oldval; 68 } 69 #endif /* CONFIG_SMP */ arch/mm/fault.c: 137 /* 138 * If we're in an interrupt or have no user context or are runni ng in an 139 * atomic region then we must not take the fault.. 140 */ 141 if (in_atomic() || !mm) 142 goto bad_area_nosemaphore; - sys_tas() is used for user-level mutual exclusion for the m32r, which is prepared to implement a linuxthreads library. The above problem may be happened in a program, which uses pthread_mutex_lock(), calls sys_tas(). The current m32r instruction set has no user-level locking functions for mutual exclusion. # I hope it will be fixed in the future... - This patch fixes the problem by using _raw_spin_lock() instead of spin_lock(). spin_lock() increments up preemt_count, on the contrary, _raw_sping_lock() does not. # I think this fix is just a temporary work around, and # it is preferable to be rewrite to make it simpler by using # asm() function or something... * arch/m32r/kernel/sys_m32r.c: - Fix sys_tas() for CONFIG_SMP && CONFIG_PREEMPT. Signed-off-by:Hayato Fujiwara <fujiwara@linux-m32r.org> Signed-off-by:
-
Hirokazu Takata authored
Here is a patch to support the M32R SIO (serial IO) driver. This driver supports the M32R serial ports. - Supports two types M32R serial interfaces; M32R_SIO and M32R_PLDSIO. - With SMP safeness. Currently the M32R_PLDSIO serial interface, which is implemented on a PLD on the M3T-M32700UT evaluation board, has slightly different specification from the integrated peripheral SIO (M32R_SIO). Now we can select them by CONFIG_ option. It is a serial-core based driver, based on drivers/serial/8250.c. Any comments or suggestions will be appreciated. Signed-off-by:
-
Hirokazu Takata authored
Here is a patch for the Renesas AR camera driver for m32r. - AR (artificial retina) camera is newly supported. AR camera module: Renesas M64278E-800, VGA(640x480 pixcels) http://www.renesas.com/avs/resource/japan/jpn/pdf/assp/rjj01f0005_psmobile.pdfSigned-off-by: -
Hirokazu Takata authored
Here is a patch to update include/asm-m32r/m32102.h. * include/asm-m32r/m32102.h: - Add macro definitions for DMA controller. - Cosmetics; rearrange indentations. Signed-off-by: -
Hirokazu Takata authored
This patch is for the new M32R CF/PCMCIA drivers. It is moved from arch/m32r/drivers/ and some part are updated for 2.6 kernel. Signed-off-by:
-
Hirokazu Takata authored
This is a DS1302 real-time clock driver. It is moved from arch/m32r/drivers/, has been originally taken from arch/cris/arch-v10/drivers/ds1302.c. Currently, this driver supports only m32r target boards. Maybe some work will be required to support other target. Signed-off-by:
-
