The source code line number (lineno) needs to be kept in accross calls
to symbol__parse_objdump_line() when parsing the output of 'objdump -l
-dS', so that it can associate it with the instructions till the next
line.

See disasm_line__new() and struct disasm_line::line_nr.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7hpx8f8ybdpiujceysaj229w@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The 'grep -v "filename"' applied to the objdump command output cause a
side effect eliminating filename:linenr of output of 'objdump -l' if the
object file name and source file name are the same, fix it.

E.g. the output of the following objdump command in symbol__disassemble():

    $ objdump -l -d -S -C /home/taeung/hello --start-address=...

    /home/taeung/hello:     file format elf64-x86-64

    Disassembly of section .text:

    0000000000400526 <main>:
    main():
    /home/taeung/hello.c:4

    void main()
    {
      400526:	55                   	push   %rbp
      400527:	48 89 e5             	mov    %rsp,%rbp
    /home/taeung/hello.c:5
    ...

But it uses grep -v "filename" e.g. "/home/taeung/hello" in the objdump
command to remove the first line containing file name and file format
("/home/taeung/hello:     file format elf64-x86-64"):

Before:

    $ objdump -l -d -S -C /home/taeung/hello | grep /home/taeung/hello

But this causes a side effect, removing filename:linenr too, because the
object file and source file have the same name e.g. "/home/taueng/hello",
"/home/taeung/hello.c"

So more do a better match by using grep -v as below to correctly remove
that first line:

    "/home/taeung/hello:     file format elf64-x86-64"

After:

    $ objdump -l -d -S -C /home/taeung/hello | grep /home/taeung/hello:
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1489978617-31396-5-git-send-email-treeze.taeung@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

'perf probe' is failing for sdt markers whose arguments has rNN (with
postfix b/w/d), %rsp, %esp, %sil etc. registers. Add renaming logic for
these registers.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170202111143.14319-3-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

An sdt probe can be associated with arguments but they were not passed
to the user probe tracing interface (uprobe_events); this patch adapts
the sdt argument descriptors according to the uprobe input format.

As the uprobe parser does not support scaled address mode, perf will
skip arguments which cannot be adapted to the uprobe format.

Here are the results:

  $ perf buildid-cache -v --add test_sdt
  $ perf probe -x test_sdt sdt_libfoo:table_frob
  $ perf probe -x test_sdt sdt_libfoo:table_diddle
  $ perf record -e sdt_libfoo:table_frob -e sdt_libfoo:table_diddle test_sdt
  $ perf script
  test_sdt  ...   666.255678:   sdt_libfoo:table_frob: (4004d7) arg0=0 arg1=0
  test_sdt  ...   666.255683: sdt_libfoo:table_diddle: (40051a) arg0=0 arg1=0
  test_sdt  ...   666.255686:   sdt_libfoo:table_frob: (4004d7) arg0=1 arg1=2
  test_sdt  ...   666.255689: sdt_libfoo:table_diddle: (40051a) arg0=3 arg1=4
  test_sdt  ...   666.255692:   sdt_libfoo:table_frob: (4004d7) arg0=2 arg1=4
  test_sdt  ...   666.255694: sdt_libfoo:table_diddle: (40051a) arg0=6 arg1=8
Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20161214000732.1710-3-alexis.berlemont@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

During a "perf buildid-cache --add" command, the section ".note.stapsdt"
of the "added" binary is scanned in order to list the available SDT
markers available in a binary. The parts containing the probes arguments
were left unscanned.

The whole section is now parsed; the probe arguments are extracted for
later use.
Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20161214000732.1710-2-alexis.berlemont@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

On old perf, when using 'perf probe -d' to delete an inexistent event,
it returns errno, eg,

  -bash-4.3# perf probe -d xxx  || echo $?
  Info: Event "*:xxx" does not exist.
    Error: Failed to delete events.
  255

But now perf_del_probe_events() will always set ret = 0, different from
previous del_perf_probe_events(). After this, it returns errno again,
eg,

  -bash-4.3# ./perf probe -d xxx  || echo $?
  "xxx" does not hit any event.
    Error: Failed to delete events.
  254

And it is more appropriate to return -ENOENT instead of -EPERM.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: dddc7ee3 ("perf probe: Fix an error when deleting probes successfully")
Link: http://lkml.kernel.org/r/1489738592-61011-1-git-send-email-wangkefeng.wang@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There are many SDT markers in powerpc whose uprobe definition goes
beyond current MAX_CMDLEN, especially when target filename is long and
sdt marker has long list of arguments. For example, definition of sdt
marker

  method__compile__end: 8@17 8@9 8@10 -4@8 8@7 -4@6 8@5 -4@4 1@37(28)

from file

  /usr/lib/jvm/java-1.8.0-openjdk-1.8.0.91-2.b14.fc22.ppc64/jre/lib/ppc64/server/libjvm.so

is

  p:sdt_hotspot/method__compile__end /usr/lib/jvm/java-1.8.0-openjdk-\
    1.8.0.91-2.b14.fc22.ppc64/jre/lib/ppc64/server/libjvm.so:0x4c4e00\
    arg1=%gpr17:u64 arg2=%gpr9:u64 arg3=%gpr10:u64 arg4=%gpr8:s32\
    arg5=%gpr7:u64 arg6=%gpr6:s32 arg7=%gpr5:u64 arg8=%gpr4:s32\
    arg9=+37(%gpr28):u8

'perf probe' fails with segfault for such markers. As the uprobe_events
file accepts definitions up to 4094 characters(4096 - 2 (\n\0)),
increase value of MAX_CMDLEN match that.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170207054547.3690-1-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-4.12-20170320' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

Fixes:

- Fix concat_probe_trace_events() in 'perf probe', it should dereference a
  pointer, not test its value (Ravi Bangoria)

User visible changes:

- Handle partial AUX records, checking if 'kvm_intel.ko' is loaded and
  if its 'vmm_exclusive' parameter is set to 0, suggesting tweaking
  it to reduce gaps (Alexander Shishkin)

Infrastructure changes:

- Sync the kvm.h, cpufeatures.h and perf_event.h tools/ headers copies
  with the kernel (Arnaldo Carvalho de Melo, Alexander Shishkin)

- 'perf lock' subcommands should include common options, using
  OPT_PARENT() (Changbin Du)

- Ditto for 'perf timechart' (Arnaldo Carvalho de Melo)

Documentation changes:

  Correct 'perf stat --no-aggr' description (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The changes in the following csets are not relevant for what is used in
tools/perf/arch/powerpc/util/kvm-stat.c, but lets sync it to silence the
diff detector in the tools build system:

  c9270132 ("KVM: PPC: Book3S HV: Add userspace interfaces for POWER9 MMU")
  17d48610 ("KVM: PPC: Book 3S: XICS: Implement ICS P/Q states")

Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Scott  Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

'*ntevs' contains number of elements present in 'tevs' array. If there
are no elements in array, 'tevs2' can be directly assigned to 'tevs'
without allocating more space. So the condition should be  '*ntevs == 0'
not  'ntevs == 0'.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 42bba263 ("perf probe: Allow wildcard for cached events")
Link: http://lkml.kernel.org/r/20170308065908.4128-1-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Description of --no-aggr in perf-stat man page is outdated. --no-aggr
can also be used while profiling specific set of cpus. For ex,

  $ perf stat -e cycles,instructions -C 1-2 --no-aggr -- sleep 1

    Performance counter stats for 'CPU(s) 1-2':

    CPU1   5,94,92,795   cycles
    CPU2   2,69,72,403   cycles
    CPU1   2,02,08,327   instructions   # 0.34 insn per cycle
    CPU2     73,17,123   instructions   # 0.12 insn per cycle

    1.000989132 seconds time elapsed
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1490013438-5713-1-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The changes in the following csets are not relevant for 'perf kvm' usage
but lets sync it to silence the diff detector in the tools build system:

  e96a006c ("KVM: arm/arm64: vgic: Implement KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO ioctl")
  d017d7b0 ("KVM: arm/arm64: vgic: Implement VGICv3 CPU interface access")
  94574c94 ("KVM: arm/arm64: vgic: Add distributor and redistributor access")

Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We use those in tools/arch/x86/lib/mem{cpy,set}_64.S, in turn used
in the 'perf bench mem' benchmarks.

The changes in the following csets are not relevant for this usecase,
but lets sync it to silence the diff detector in the tools build system:

	6fb89569 ("x86/cpufeature: Add 5-level paging detection")

Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This patch decodes the 'partial' flag in AUX records and prints
a warning to the user, so that they don't have to guess why their
PT traces contain gaps (or missing altogether):

  Warning:
  AUX data had gaps in it 8 times out of 8!

  Are you running a KVM guest in the background?

Trying to be even more helpful, we will detect if the user's kvm driver sets up
exclusive VMX root mode for the entire lifespan of the kvm process:

  Reloading kvm_intel module with vmm_exclusive=0
  will reduce the gaps to only guest's timeslices.

Note however, that you'll still have gaps in cpu-wide traces even with
vmm_exclusive=0, but the number of gaps will be below 100% (as opposed to the
above example).

Currently this is the only reason for partial records.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get PERF_AUX_FLAG_PARTIAL, introduced in:

  ae0c2d99 ("perf/core: Add a flag for partial AUX records")

and that will be used to warn the user about gaps in AUX records due
to VMX being used in KVM guests.

Silences the kernel/tools file copy detector:

  Warning: include/uapi/linux/perf_event.h differs from kernel
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Will be used in a upcoming patch warning about PERF_RECORD_AUX data
gaps, reading the "module/kvm_intel/parameters/vmm_exclusive" sysfs
entry.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Move -T/--tasks-only and -P/--power-only options to a separate options
array that then gets referenced via OPT_PARENT from the 'perf timechart'
and 'perf timechart record' option arrays.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j80lol9wj1i6556ibh48iebe@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

All options need the -f/--force option, so move it to the array
referenced via OPT_PARENT.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-unbeionpi58rioh4e9w8kp4n@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When I use -i option for report subcommand, it doesn't accept it.  We
need add common options using OPT_PARENT macro.

perf lock report -i lock_perf.data
  Error: unknown switch `i'

  Usage: perf lock report [<options>]

    -f, --force           don't complain, do it
    -k, --key <acquired>  key for sorting ...
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170317055342.8284-1-changbin.du@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-4.12-20170316' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

 - Add 'brstackinsn' field in 'perf script' to reuse the x86 instruction
   decoder used in the Intel PT code to study hot paths to samples (Andi Kleen)

Kernel changes:

 - Default UPROBES_EVENTS to Y (Alexei Starovoitov)

 - Fix check for kretprobe offset within function entry (Naveen N. Rao)

Infrastructure changes:

 - Introduce util func is_sdt_event() (Ravi Bangoria)

 - Make perf_event__synthesize_mmap_events() scale on older kernels where
   reading /proc/pid/maps is way slower than reading /proc/pid/task/pid/maps (Stephane Eranian)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

As it is already turned on by most distros, so just flip the default to
Y.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: David Miller <davem@davemloft.net>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170316005817.GA6805@ast-mbp.thefacebook.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Implement printing instruction sequences as hex dump for branch stacks.

This relies on the x86 instruction decoder used by the PT decoder to
find the lengths of instructions to dump them individually.

This is good enough for pattern matching.

This allows to study hot paths for individual samples, together with
branch misprediction and cycle count / IPC information if available (on
Skylake systems).

  % perf record -b ...
  % perf script -F brstackinsn
  ...
    read_hpet+67:
          ffffffff9905b843        insn: 74 ea                     # PRED
          ffffffff9905b82f        insn: 85 c9
          ffffffff9905b831        insn: 74 12
          ffffffff9905b833        insn: f3 90
          ffffffff9905b835        insn: 48 8b 0f
          ffffffff9905b838        insn: 48 89 ca
          ffffffff9905b83b        insn: 48 c1 ea 20
          ffffffff9905b83f        insn: 39 f2
          ffffffff9905b841        insn: 89 d0
          ffffffff9905b843        insn: 74 ea                     # PRED

Only works when no special branch filters are specified.

Occasionally the path does not reach up to the sample IP, as the LBRs
may be frozen before executing a final jump. In this case we print a
special message.

The instruction dumper piggy backs on the existing infrastructure from
the IP PT decoder.

An earlier iteration of this patch relied on a disassembler, but this
version only uses the existing instruction decoder.

Committer note:

Added hint about how to get suitable perf.data files for use with
'-F brstackinsm':

  $ perf record usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.018 MB perf.data (8 samples) ]
  $
  $ perf script -F brstackinsn
  Display of branch stack assembler requested, but non all-branch filter set
  Hint: run 'perf record -b ...'
  $
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20170223234634.583-1-andi@firstfloor.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We use those in tools/arch/x86/lib/mem{cpy,set}_64.S, in turn used
in the 'perf bench mem' benchmarks.

The changes in the following csets are not relevant for this usecase,
but lets sync it to silence the diff detector in the tools build system:

  78d1b296 ("x86/cpu: Add X86_FEATURE_CPUID")
  3bba73b1 ("x86/cpufeature: Move RING3MWAIT feature to avoid conflicts")

Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since commit:

  1c5ac21a ("perf/x86/intel/pt: Don't die on VMXON")

... PT events depend on re-scheduling to get enabled after a VMX session
has taken place. This is, in particular, a problem for CPU context events,
which don't normally get re-scheduled, unless there is a reason.

This patch changes the VMX handling so that PT event gets re-enabled
when VMX root mode exits.

Also, notify the user when there's a gap in PT data due to VMX root
mode by flagging AUX records as partial.

In combination with vmm_exclusive=0 parameter of the kvm_intel driver,
this will result in trace gaps only for the duration of the guest's
timeslices.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170220133352.17995-5-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The Intel PT driver needs to be able to communicate partial AUX transactions,
that is, transactions with gaps in data for reasons other than no room
left in the buffer (i.e. truncated transactions). Therefore, this condition
does not imply a wakeup for the consumer.

To this end, add a new "partial" AUX flag.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170220133352.17995-4-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

In preparation for adding more flags to perf AUX records, introduce a
separate API for setting the flags for a session, rather than appending
more bool arguments to perf_aux_output_end. This allows to set each
flag at the time a corresponding condition is detected, instead of
tracking it in each driver's private state.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170220133352.17995-3-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Goldmont supports full Top Down level 1 metrics (FrontendBound,
Retiring, Backend Bound and Bad Speculation).
It has 3 wide pipeline.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1486711438-80058-1-git-send-email-kan.liang@intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull block fixes from Jens Axboe:
 "Four small fixes for this cycle:

   - followup fix from Neil for a fix that went in before -rc2, ensuring
     that we always see the full per-task bio_list.

   - fix for blk-mq-sched from me that ensures that we retain similar
     direct-to-issue behavior on running the queue.

   - fix from Sagi fixing a potential NULL pointer dereference in blk-mq
     on spurious CPU unplug.

   - a memory leak fix in writeback from Tahsin, fixing a case where
     device removal of a mounted device can leak a struct
     wb_writeback_work"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq-sched: don't run the queue async from blk_mq_try_issue_directly()
  writeback: fix memory leak in wb_queue_work()
  blk-mq: Fix tagset reinit in the presence of cpu hot-unplug
  blk: Ensure users for current->bio_list can see the full list.

This patch significantly improves the execution time of
perf_event__synthesize_mmap_events() when running perf record on systems
where processes have lots of threads.

It just happens that cat /proc/pid/maps support uses a O(N^2) algorithm to
generate each map line in the maps file.  If you have 1000 threads, then you
have necessarily 1000 stacks.  For each vma, you need to check if it
corresponds to a thread's stack.  With a large number of threads, this can take
a very long time. I have seen latencies >> 10mn.

As of today, perf does not use the fact that a mapping is a stack, therefore we
can work around the issue by using /proc/pid/tasks/pid/maps.  This entry does
not try to map a vma to stack and is thus much faster with no loss of
functonality.

The proc-map-timeout logic is kept in case users still want some upper limit.

In V2, we fix the file path from /proc/pid/tasks/pid/maps to actual
/proc/pid/task/pid/maps, tasks -> task.  Thanks Arnaldo for catching this.

Committer note:

This problem seems to have been elliminated in the kernel since commit :
b18cb64e ("fs/proc: Stop trying to report thread stacks").
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170315135059.GC2177@redhat.com
Link: http://lkml.kernel.org/r/1489598233-25586-1-git-send-email-eranian@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf specifies an offset from _text and since this offset is fed
directly into the arch-specific helper, kprobes tracer rejects
installation of kretprobes through perf. Fix this by looking up the
actual offset from a function for the specified sym+offset.

Refactor and reuse existing routines to limit code duplication -- we
repurpose kprobe_addr() for determining final kprobe address and we
split out the function entry offset determination into a separate
generic helper.

Before patch:

  naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return
  probe-definition(0): do_open%return
  symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /boot/vmlinux for symbols
  Open Debuginfo file: /boot/vmlinux
  Try to find probe point from debuginfo.
  Matched function: do_open [2d0c7ff]
  Probe point found: do_open+0
  Matched function: do_open [35d76dc]
  found inline addr: 0xc0000000004ba9c4
  Failed to find "do_open%return",
   because do_open is an inlined function and has no return point.
  An error occurred in debuginfo analysis (-22).
  Trying to use symbols.
  Opening /sys/kernel/debug/tracing//README write=0
  Opening /sys/kernel/debug/tracing//kprobe_events write=1
  Writing event: r:probe/do_open _text+4469776
  Failed to write event: Invalid argument
    Error: Failed to add events. Reason: Invalid argument (Code: -22)
  naveen@ubuntu:~/linux/tools/perf$ dmesg | tail
  <snip>
  [   33.568656] Given offset is not valid for return probe.

After patch:

  naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return
  probe-definition(0): do_open%return
  symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /boot/vmlinux for symbols
  Open Debuginfo file: /boot/vmlinux
  Try to find probe point from debuginfo.
  Matched function: do_open [2d0c7d6]
  Probe point found: do_open+0
  Matched function: do_open [35d76b3]
  found inline addr: 0xc0000000004ba9e4
  Failed to find "do_open%return",
   because do_open is an inlined function and has no return point.
  An error occurred in debuginfo analysis (-22).
  Trying to use symbols.
  Opening /sys/kernel/debug/tracing//README write=0
  Opening /sys/kernel/debug/tracing//kprobe_events write=1
  Writing event: r:probe/do_open _text+4469808
  Writing event: r:probe/do_open_1 _text+4956344
  Added new events:
    probe:do_open        (on do_open%return)
    probe:do_open_1      (on do_open%return)

  You can now use it in all perf tools, such as:

	  perf record -e probe:do_open_1 -aR sleep 1

  naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list
  c000000000041370  k  kretprobe_trampoline+0x0    [OPTIMIZED]
  c0000000004ba0b8  r  do_open+0x8    [DISABLED]
  c000000000443430  r  do_open+0x0    [DISABLED]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Factor out the SDT event name checking routine as is_sdt_event().
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170314150658.7065-2-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-4.12-20170314' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

- Add PERF_RECORD_NAMESPACES so that the kernel can record information
  required to associate samples to namespaces, helping in container
  problem characterization.

  Now the 'perf record has a --namespace' option to ask for such info,
  and when present, it can be used, initially, via a new sort order,
  'cgroup_id', allowing histogram entry bucketization by a (device, inode)
  based cgroup identifier (Hari Bathini)

- Add --next option to 'perf sched timehist', showing what is the next
  thread to run (Brendan Gregg)

Fixes:

- Fix segfault with basic block 'cycles' sort dimension (Changbin Du)

- Add c2c to command-list.txt, making it appear in the 'perf help'
  output (Changbin Du)

- Fix zeroing of 'abs_path' variable in the perf hists browser switch
  file code (Changbin Du)

- Hide tips messages when -q/--quiet is given to 'perf report' (Namhyung Kim)

Infrastructure changes:

- Use ref_reloc_sym + offset to setup kretprobes (Naveen Rao)

- Ignore generated files pmu-events/{jevents,pmu-events.c} for git (Changbin Du)

Documentation changes:

- Document +field style argument support for --field option (Changbin Du)

- Clarify 'perf c2c --stats' help message (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull SCSI fixes from James Bottomley:
 "This is a rather large set of fixes. The bulk are for lpfc correcting
  a lot of issues in the new NVME driver code which just went in in the
  merge window.

  The others are:

   - fix a hang in the vmware paravirt driver caused by incorrect
     handling of the new MSI vector allocation

   - long standing bug in storvsc, which recent block changes turned
     from being a harmless annoyance into a hang

   - yet more fallout (in mpt3sas) from the changes to device blocking

  The remainder are small fixes and updates"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits)
  scsi: lpfc: Add shutdown method for kexec
  scsi: storvsc: Workaround for virtual DVD SCSI version
  scsi: lpfc: revise version number to 11.2.0.10
  scsi: lpfc: code cleanups in NVME initiator discovery
  scsi: lpfc: code cleanups in NVME initiator base
  scsi: lpfc: correct rdp diag portnames
  scsi: lpfc: remove dead sli3 nvme code
  scsi: lpfc: correct double print
  scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT
  scsi: lpfc: Rework lpfc Kconfig for NVME options
  scsi: lpfc: add transport eh_timed_out reference
  scsi: lpfc: Fix eh_deadline setting for sli3 adapters.
  scsi: lpfc: add NVME exchange aborts
  scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport
  scsi: lpfc: Fix IO submission if WQ is full
  scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem
  scsi: lpfc: Fix RCTL value on NVME LS request and response
  scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters
  scsi: lpfc: fix missing spin_unlock on sql_list_lock
  scsi: lpfc: don't dereference dma_buf->iocbq before null check
  ...

Pull gfs2 fix from Bob Peterson:
 "This is an emergency patch for 4.11-rc3

  The GFS2 developers uncovered a really nasty problem that can lead to
  random corruption and kernel panic, much like the last one. Andreas
  Gruenbacher wrote a simple one-line patch to fix the problem."

* tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Avoid alignment hole in struct lm_lockname

Pull crypto fixes from Herbert Xu:

 - self-test failure of crc32c on powerpc

 - regressions of ecb(aes) when used with xts/lrw in s5p-sss

 - a number of bugs in the omap RNG driver

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: s5p-sss - Fix spinlock recursion on LRW(AES)
  hwrng: omap - Do not access INTMASK_REG on EIP76
  hwrng: omap - use devm_clk_get() instead of of_clk_get()
  hwrng: omap - write registers after enabling the clock
  crypto: s5p-sss - Fix completing crypto request in IRQ handler
  crypto: powerpc - Fix initialisation of crc32c context

Commit 88ffbf3e switches to using rhashtables for glocks, hashing over
the entire struct lm_lockname instead of its individual fields.  On some
architectures, struct lm_lockname contains a hole of uninitialized
memory due to alignment rules, which now leads to incorrect hash values.
Get rid of that hole.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
CC: <stable@vger.kernel.org> #v4.3+

Pull networking fixes from David Miller:

 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver,
    from Steffen Klassert.

 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from
    Alexei Starovoitov.

 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from
    Michal Schmidt.

 4) We can get a divide by zero when TCP socket are morphed into
    listening state, fix from Eric Dumazet.

 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and
    skb_complete_tx_timestamp(). From Eric Dumazet.

 6) Use after free in dccp_feat_activate_values(), also from Eric
    Dumazet.

 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from
    Jarod Wilson.

 8) Fix use after free in vrf_xmit(), from David Ahern.

 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from
    Alexey Kodanev.

10) Properly check napi_complete_done() return value in order to decide
    whether to re-enable IRQs or not in amd-xgbe driver, from Thomas
    Lendacky.

11) Fix double free of hwmon device in marvell phy driver, from Andrew
    Lunn.

12) Don't crash on malformed netlink attributes in act_connmark, from
    Etienne Noss.

13) Don't remove routes with a higher metric in ipv6 ECMP route replace,
    from Sabrina Dubroca.

14) Don't write into a cloned SKB in ipv6 fragmentation handling, from
    Florian Westphal.

15) Fix routing redirect races in dccp and tcp, basically the ICMP
    handler can't modify the socket's cached route in it's locked by the
    user at this moment. From Jon Maxwell.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits)
  qed: Enable iSCSI Out-of-Order
  qed: Correct out-of-bound access in OOO history
  qed: Fix interrupt flags on Rx LL2
  qed: Free previous connections when releasing iSCSI
  qed: Fix mapping leak on LL2 rx flow
  qed: Prevent creation of too-big u32-chains
  qed: Align CIDs according to DORQ requirement
  mlxsw: reg: Fix SPVMLR max record count
  mlxsw: reg: Fix SPVM max record count
  net: Resend IGMP memberships upon peer notification.
  dccp: fix memory leak during tear-down of unsuccessful connection request
  tun: fix premature POLLOUT notification on tun devices
  dccp/tcp: fix routing redirect race
  ucc/hdlc: fix two little issue
  vxlan: fix ovs support
  net: use net->count to check whether a netns is alive or not
  bridge: drop netfilter fake rtable unconditionally
  ipv6: avoid write to a possibly cloned skb
  net: wimax/i2400m: fix NULL-deref at probe
  isdn/gigaset: fix NULL-deref at probe
  ...

Pull cgroup fixes from Tejun Heo:
 "Three cgroup fixes.  Nothing critical:

   - the pids controller could trigger suspicious RCU warning
     spuriously. Fixed.

   - in the debug controller, %p -> %pK to protect kernel pointer
     from getting exposed.

   - documentation formatting fix"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroups: censor kernel pointer in debug files
  cgroup/pids: remove spurious suspicious RCU usage warning
  cgroup: Fix indenting in PID controller documentation

Pull libata fixes from Tejun Heo:
 "Three libata fixes:

   - fix for a circular reference bug in sysfs code which prevented
     pata_legacy devices from being released after probe failure, which
     in turn prevented devres from releasing the associated resources.

   - drop spurious WARN in the command issue path which can be triggered
     by a legitimate passthrough command.

   - an ahci_qoriq specific fix"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: qoriq: correct the sata ecc setting error
  libata: drop WARN from protocol error in ata_sff_qc_issue()
  libata: transport: Remove circular dependency at free time