- 03 Jul, 2019 5 commits
-
-
Maxime Ripard authored
Both the allwinner and amlogic compatibles require that either the allwinner,pipeline or the amlogic,pipeline property is set. This was dropped during the conversion since we didn't have conditionals back then, but we can express this properly now. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Rob Herring <robh@kernel.org>
-
Maxime Ripard authored
The simple-framebuffer binding has a compatible that isn't one of the valid options. Since an Allwinner pipeline is being described, let's add the matching compatible. Signed-off-by:
-
Maxime Ripard authored
The child nodes of a mdio bus are supposed to be ethernet PHYs, with a reg property. Make sure that's validated as well. Signed-off-by:
-
Maxime Ripard authored
MDIO controllers should have child nodes with a singe value in their reg properties being the ID of the PHY in the bus. Let's add the proper constraints on #address-cells and #size-cells. Signed-off-by:
-
Maxime Ripard authored
The node name of an MDIO controller should be MDIO. Let's add a rule for this. Signed-off-by:
-
- 28 Jun, 2019 14 commits
-
-
Rob Herring authored
Mixing 'maxItems' and scalar properties doesn't make much sense, so drop 'maxItems' as a single item is implied. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-mtd@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: -
Rob Herring authored
Matching on the 'cpus' node was a bad choice because the schema is incorrectly applied to non-Arm cpus nodes. As we now have a common cpus schema which checks the general structure, it is also redundant to do so in the Arm CPU schema. The downside is one could conceivably mix different architecture's cpu nodes or have typos in the compatible string. The latter problem pretty much exists for every schema. Signed-off-by: -
Brian Masney authored
The '#address-cells' and '#size-cells' properties were not defined in the lm3630a bindings and would cause the following error when attempting to validate the examples against the schema: Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: '#address-cells', '#size-cells' do not match any of the regexes: '^led@[01]$', 'pinctrl-[0-9]+' Correct this by adding those two properties. While we're here, move the ti,linear-mapping-mode property to the led@[01] child nodes to correct the following validation error: Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: led@0: 'ti,linear-mapping-mode' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: 32fcb75c ("dt-bindings: backlight: Add lm3630a bindings") Signed-off-by:
Brian Masney <masneyb@onstation.org> Reported-by:
Rob Herring <robh+dt@kernel.org> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Acked-by:
Dan Murphy <dmurphy@ti.com> [robh: also drop maxItems from child reg] Signed-off-by:
-
Maxime Ripard authored
Even though the DWMAC driver uses some driver specific properties, the PHY core has a bunch of generic properties and can deal with them nicely. Let's deprecate our specific properties. Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Maxime Ripard authored
Switch our Allwinner H3 EMAC controller binding to a YAML schema to enable the DT validation. Since that controller is based on a Synopsys IP, let's add the validation to that schemas with a bunch of conditionals. Reviewed-by:
-
Maxime Ripard authored
Switch our Allwinner A20 GMAC controller binding to a YAML schema to enable the DT validation. Since that controller is based on a Synopsys IP, let's add the validation to that schemas with a bunch of conditionals. Reviewed-by:
-
Maxime Ripard authored
Switch the STMMAC / Synopsys DesignWare MAC controller binding to a YAML schema to enable the DT validation. Reviewed-by:
-
Maxime Ripard authored
Switch our Allwinner A10 MDIO controller binding to a YAML schema to enable the DT validation. Reviewed-by:
-
Maxime Ripard authored
Switch our Allwinner A10 EMAC controller binding to a YAML schema to enable the DT validation. Reviewed-by:
-
Maxime Ripard authored
Unlike what was initially claimed in the PHY binding, the interrupt property of a PHY can be omitted, and the OS will turn to polling instead. Document that. Reviewed-by:
-
Maxime Ripard authored
While the Ethernet PHY framework was marked as maintained, the device tree bindings associated to that framework was not listed under the maintained files. Fix that. Reviewed-by:
-
Maxime Ripard authored
The MDIO buses have a number of available device tree properties that can be used in their device tree node. Add a YAML schemas for those. Suggested-by:
-
Maxime Ripard authored
The networking PHYs have a number of available device tree properties that can be used in their device tree node. Add a YAML schemas for those. Reviewed-by:
-
Maxime Ripard authored
The Ethernet controllers have a good number of generic options that can be needed in a device tree. Add a YAML schemas for those. Reviewed-by:
-
- 27 Jun, 2019 8 commits
-
-
Rob Herring authored
Convert the PSCI binding to use DT schema format. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: -
Rob Herring authored
Convert Conexant Digicolor SoC bindings to DT schema format using json-schema. Acked-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Rob Herring authored
Convert NXP LPC32xx SoC bindings to DT schema format using json-schema. Cc: Roland Stigge <stigge@antcom.de> Signed-off-by: -
Rob Herring authored
Convert MOXA ART SoC bindings to DT schema format using json-schema. Cc: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: -
Rob Herring authored
Convert Axxia SoC bindings to DT schema format using json-schema. Cc: Anders Berg <anders.berg@lsi.com> Signed-off-by: -
Rob Herring authored
The board bindings for IPQ4019 are undocumented. Add the missing bindings to the schema. Cc: Andy Gross <agross@kernel.org> Cc: David Brown <david.brown@linaro.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: -
Rob Herring authored
The SoC/board bindings for MSM8974 are undocumented. Add the missing bindings to the schema. Cc: Andy Gross <agross@kernel.org> Cc: David Brown <david.brown@linaro.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: -
Rob Herring authored
Convert Alpine SoC bindings to DT schema format using json-schema. Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com> Cc: Antoine Tenart <antoine.tenart@free-electrons.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by:
-
- 21 Jun, 2019 1 commit
-
-
Rob Herring authored
Pull in SPDX tag conversion from upstream dtc. This will replace the conversion done in the kernel tree copy in v5.2-rc2. This adds the following commits from upstream: 702c1b6c0e73 README.license: Update to reflect SPDX tag usage 4097bbffcf1d dtc: Add GPLv2 SPDX tags to files missing license text 94f87cd5b7c5 libfdt: Add dual GPL/BSD SPDX tags to files missing license text c4ffc05574b1 tests: Replace license boilerplate with SPDX tags a5ac29baacd2 pylibfdt: Replace dual GPLv2/BSD license boilerplate with SPDX tags 7fb0f4db2eb7 libfdt: Replace GPL/BSD boilerplate/reference with SPDX tags acfe84f2c47e dtc: Replace GPLv2 boilerplate/reference with SPDX tags Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
- 18 Jun, 2019 3 commits
-
-
Geert Uytterhoeven authored
"git diff" says: \ No newline at end of file after modifying the files. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Kefeng Wang authored
When CONFIG_OF_EARLY_FLATTREE is disabled, there is a compiler warning, drivers/of/fdt.c:129:19: warning: ‘of_fdt_match’ defined but not used [-Wunused-function] static int __init of_fdt_match(const void *blob, unsigned long node, Since the only caller of of_fdt_match() is of_flat_dt_match(), let's move the body of of_fdt_match() into of_flat_dt_match() and eliminate of_fdt_match(). Meanwhile, move of_fdt_is_compatible() under CONFIG_OF_EARLY_FLATTREE, as all callers are over there. Fixes: 9b4d2b63 ("of/fdt: Remove dead code and mark functions with __init") Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Marco Felsch authored
Kontron is a leading embedded computer supplier. More information can be found on: https://www.kontron.de/Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
- 14 Jun, 2019 1 commit
-
-
Erwan Le Ray authored
STM32 serial can be reset via reset controller. Add an optional reset property to stm32 usart bindings. Signed-off-by:
Erwan Le Ray <erwan.leray@st.com> Signed-off-by:
-
- 13 Jun, 2019 5 commits
-
-
Amit Kucheria authored
The "enable-method" property for cpu nodes needs to be "psci" for CPU idle management to be setup correctly. Add a note to the binding documentation to this effect to make it obvious. Signed-off-by:
Amit Kucheria <amit.kucheria@linaro.org> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Geert Uytterhoeven authored
Make the naming of units consistent with common practices: - Do not capitalize the first character of units ("Celsius" is special, as it is not the unit name, but a reference to its proposer), - Do not use plural for units, - Do not abbreviate "ampere", - Concatenate prefixes and units (no spaces or hyphens), - Separate units by spaces not hyphens, - "milli" applies to "degree", not to "Celsius". Signed-off-by: -
Hannes Schmelzer authored
Signed-off-by:
Hannes Schmelzer <hannes.schmelzer@br-automation.com> [robh: rework for schema] Signed-off-by:
-
Rob Herring authored
Currently, the binding examples are just built with dtc. dtc recently gained the support necessary to output the examples in YAML format (commit 87963ee20693 ("livetree: add missing type markers in generated overlay properties"). Now just switch the output format and the examples will be checked against the schema. Reviewed-by: -
Rob Herring authored
Generated nodes for overlays begin with '_'. The binding examples are built as overlays in order to allow unresolved phandles, so we need to allow the generated node names. Reviewed-by:
-
- 12 Jun, 2019 1 commit
-
-
Rob Herring authored
This adds the following commits from upstream: 87963ee20693 livetree: add missing type markers in generated overlay properties 825146d13dc0 Fix typos in various documentation and source files 25bb080c18d1 Update the GPL2 text to the latest revision 243176c4ce84 Fix bogus error on rebuild ce01b21098a4 libfdt: Add FDT_CREATE_FLAG_NO_NAME_DEDUP flag that trades size for speed fbb62754ce45 libfdt: Introduce fdt_create_with_flags() 228a44cce857 libfdt: Ensure fdt_add_property frees allocated name string on failure 8f695676227b Avoid assertion in check_interrupts_property() 5c3513f68921 Link tools and tests against libfdt shared library 00f9febf9c16 tests: Rename tests.sh to testutils.sh c5d45188f923 Clean up LDLIBS handling 6ef8fcd05b74 Rebuild libfdt shared object if versioning linker script changes 26ee65a16c38 Use Python3 by default cca6546244cb libfdt: Make fdt_get_max_phandle() an inline 730875016a6a libfdt: Add phandle generation helper 7dfb61ba96b1 libfdt: Use fdt_find_max_phandle() 2bc5b66d7f6c libfdt: Add new maximum phandle lookup function 7fcf8208b8a9 libfdt: add fdt_append_addrrange() ae795b2db7a4 checks: Do not omit nodes with labels if symbol generation is requested eac2ad495b29 Update version.lds again f67b47135523 Revert "libfdt: Add phandle generation helper" 54ea41c22415 libfdt: Add phandle generation helper 4762ad051ee0 checks: Fix spelling in check_graph_endpoint d37f6b20107e Bump version to v1.5.0 a4b1a307ff3a pylibfdt:tests: Extend the way how to find a Python module 625dd8aaf20f pylibfdt: Change how passing tests are recognized 364631626bb7 pylibfdt: Test fdt.setprop take bytes on Python 3, add error handling cb0f454f73cc pylibfdt: check_err accepts only integer as a first argument. 4b68c6b3605a pylibfdt: Proper handling of bytes/unicode strings and octal literals 78e113e81c9d Use PRIxPTR for printing uintptr_t values ea7a8f6dad67 libfdt: Fix FDT_ERR_NOTFOUND typos in documentation 5aafd7ca43e0 libfdt: Fix fdt_getprop_by_offset() parameter name in documentation 7cbc550f903b checks: Add unit address check if node is enabled Signed-off-by:
-
- 11 Jun, 2019 1 commit
-
-
Maxime Ripard authored
Add all the missing vendors used in Allwinner DTS. Signed-off-by:
-
- 26 May, 2019 1 commit
-
-
Maxime Ripard authored
In the text file, simtek didn't have any description and apparently this confused the conversion script. Fix the simtek entry and add a proper description. Signed-off-by:
-
