* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: clear bridge resource range if BIOS assigned bad one
  PCI: hotplug/cpqphp, fix NULL dereference
  Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
  PCI: change resource collision messages from KERN_ERR to KERN_INFO

Yannick found that video does not work with 2.6.34.  The cause of this
bug was that the BIOS had assigned the wrong range to the PCI bridge
above the video device.  Before 2.6.34 the kernel would have shrunk
the size of the bridge window, but since
  d65245c3 PCI: don't shrink bridge resources
the kernel will avoid shrinking BIOS ranges.

So zero out the old range if we fail to claim it at boot time; this will
cause us to allocate a new range at startup, restoring the 2.6.34
behavior.

Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009.
Reported-by: Yannick <yannick.roehlly@free.fr>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

There are devices out there which are PCI Hot-plug controllers with
compaq PCI IDs, but are not bridges, hence have pdev->subordinate
NULL. But cpqphp expects the pointer to be non-NULL.

Add a check to the probe function to avoid oopses like:
BUG: unable to handle kernel NULL pointer dereference at 00000050
IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp]
*pdpt = 0000000033779001 *pde = 0000000000000000
...

The device here was:
00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11)
	Subsystem: Compaq Computer Corporation Device [0e11:a2f8]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

This reverts commit 75568f80.

Since they're just a convenience anyway, remove these symlinks since
they're causing duplicate filename errors in the wild.
Acked-by: Alex Chiang <achiang@canonical.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

We can often deal with PCI resource issues by moving devices around.  In
that case, there's no point in alarming the user with messages like these.
There are many bug reports where the message itself is the only problem,
e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 .
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Create output directory in Makefile.modbuiltin
  kbuild: Generate modules.builtin in make modules

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: avoid validate_cis failure on CIS override
  pcmcia: dev_node removal bugfix
  pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TI
  pcmcia: only keep saved I365_CSCINT flag if there is no PCI irq

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: try to send partial cap release on cap message on missing inode
  ceph: release cap on import if we don't have the inode
  ceph: fix misleading/incorrect debug message
  ceph: fix atomic64_t initialization on ia64
  ceph: fix lease revocation when seq doesn't match
  ceph: fix f_namelen reported by statfs
  ceph: fix memory leak in statfs
  ceph: fix d_subdirs ordering problem

If we have enough memory to allocate a new cap release message, do so, so
that we can send a partial release message immediately.  This keeps us from
making the MDS wait when the cap release it needs is in a partially full
release message.

If we fail because of ENOMEM, oh well, they'll just have to wait a bit
longer.
Signed-off-by: Sage Weil <sage@newdream.net>

If we get an IMPORT that give us a cap, but we don't have the inode, queue
a release (and try to send it immediately) so that the MDS doesn't get
stuck waiting for us.
Signed-off-by: Sage Weil <sage@newdream.net>

Nothing is released here: the caps message is simply ignored in this case.
Signed-off-by: Sage Weil <sage@newdream.net>

bdi_seq is an atomic_long_t but we're using ATOMIC_INIT, which causes
 build failures on ia64. This patch fixes it to use ATOMIC_LONG_INIT.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Sage Weil <sage@newdream.net>

The data in the cmd_block buffers may reach the main memory after the
writel() to the device ports. This patch introduces two calls to wmb()
to ensure the relative ordering.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Colin Tuckley <colin.tuckley@arm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

cb->atapi.cdb is an array of 16 u8 elements.  The call too memset()
would set the first part of the sge array to zero as well.  It's not
a packed struct.

This one has been around for five years.  I found it with Smatch.  I
think the reason no one has seen it before is because we normally call
sil24_fill_sg() and that overwrites sge with proper information?
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: read apic->irr with ioapic lock held
  KVM: ia64: Add missing spin_unlock in kvm_arch_hardware_enable()
  KVM: Fix order passed to iommu_unmap
  KVM: MMU: Remove user access when allowing kernel access to gpte.w=0 page
  KVM: MMU: invalidate and flush on spte small->large page size change
  KVM: SVM: Implement workaround for Erratum 383
  KVM: SVM: Handle MCEs early in the vmexit process
  KVM: powerpc: fix init/exit annotation

Read ioapic->irr inside ioapic->lock protected section.

KVM-Stable-Tag
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

* 'for-linus2' of git://git.kernel.dk/linux-2.6-block:
  pipe: fix check in "set size" fcntl
  pipe: fix pipe buffer resizing
  block: remove duplicate BUG_ON() in bd_finish_claiming()
  block: bd_start_claiming cleanup
  block: bd_start_claiming fix module refcount

As it stands this check compares the number of pages to the page size.
This makes no sense and makes the fcntl fail in almost any sane case.

Fix it by checking if nr_pages is not zero (it can become zero only if
arg is too big and round_pipe_size() overflows).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

pipe_set_size() needs to copy pipe bufs from the old circular buffer
to the new.

The current code gets this wrong in multiple ways, resulting in oops.

Test program is available here:
  http://www.kernel.org/pub/linux/kernel/people/mszeredi/piperesize/Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

We do the same BUG_ON() just a line later when calling into
__bd_abort_claiming().
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

I don't like the subtle multi-context code in bd_claim (ie.  detects where it
has been called based on bd_claiming). It seems clearer to just require a new
function to finish a 2-part claim.

Also improve commentary in bd_start_claiming as to how it should
be used.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

bd_start_claiming has an unbalanced module_put introduced in 6b4517a7.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: sound/spi: patch for the unuseful variable removal
  ALSA: hda - Add SSID table for iMac7,1.
  ALSA: hda - Add SSID table for MacBookAir1,1
  ALSA: hda - Add SSID table for MacBookAir2,1
  ALSA: atmel: set "channel A event" output to debug

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix null pointer deref with SEND_SIG_FORCED
  perf: Fix signed comparison in perf_adjust_period()
  powerpc/oprofile: fix potential buffer overrun in op_model_cell.c
  perf symbols: Set the DSO long name when using symbol_conf.vmlinux_name

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6164/1: Add kto and kfrom to input operands list.
  ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6
  ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debugging
  ARM: 6152/1: ux500 make it possible to disable localtimers
  [ARM] pxa/spitz: Correctly register WM8750
  [ARM] pxa/palmtc: storage class should be before const qualifier
  ARM: 6146/1: sa1111: Prevent deadlock in resume path
  ARM: 6145/1: ux500 MTU clockrate correction
  ARM: 6144/1: TCM memory bug freeing bug
  ARM: VFP: Fix vfp_put_double() for d16-d31

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>

Generating the file in make modules_install was broken as well, because
it didn't work in a readonly filesystem and otherwise it generated a
root-owned file which is not wanted.
Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Michal Marek <mmarek@suse.cz>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  mac80211: fix deauth before assoc
  iwlwifi: add missing rcu_read_lock
  mac80211: fix function pointer check
  wireless: remove my name from the maintainer list
  ath5k: fix NULL pointer in antenna configuration
  p54usb: Add device ID for Dell WLA3310 USB
  wl1251: fix a memory leak in probe
  ipmr: dont corrupt lists
  8139too: fix buffer overrun in rtl8139_init_board
  asix: check packet size against mtu+ETH_HLEN instead of ETH_FRAME_LEN
  r8169: fix random mdio_write failures
  ip6mr: fix a typo in ip6mr_for_each_table()
  iwlwifi: move sysfs_create_group to post request firmware
  iwlwifi: add name to Maintainers list
  iwl3945: fix internal scan
  iwl3945: enable stuck queue detection on 3945
  ipv6: avoid high order allocations
  ath5k: retain promiscuous setting
  ath5k: depend on CONFIG_PM_SLEEP for suspend/resume functions
  mac80211: process station blockack action frames from work
  ...

* 'for-2.6.35' of git://linux-nfs.org/~bfields/linux:
  nfsd4: shut down callback queue outside state lock
  nfsd: nfsd_setattr needs to call commit_metadata

Reinstate the null behaviour that the in-kernel gdbstub had for the GDB
remote protocol 'p' command (retrieve a single register value) prior to
commit 7ca8b9c0 ("frv: extend gdbstub to support more features of
gdb").

Before that, the 'p' command just returned an empty reply, which causes
gdb to then go and use the 'g' command.  However, since that commit, the
'p' command returns an error string, which causes gdb to abort its
connection to the target.

Not all gdb versions are affected, some use try 'g' first, and if that
works, don't bother with 'p', and so don't see the error.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'msm-urgent' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  mmc: msm: fix compile error on MSM7x30
  msm: dma: add completion.h header

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix sg_dma_len() regression
  microblaze: Define ARCH_SLAB_MINALIGN to fix slab crash

MSM7x30 isn't supported in this driver yet. If ones tried to compile it in
with MSM7x30 configure you get,

linux-2.6/drivers/mmc/host/msm_sdcc.c: In function 'msmsdcc_fifo_addr':
linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: 'MSM_SDC1_PHYS' undeclared (first use in this function)
linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: (Each undeclared identifier is reported only once
linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: for each function it appears in.)
linux-2.6/drivers/mmc/host/msm_sdcc.c:167: error: 'MSM_SDC2_PHYS' undeclared (first use in this function)
linux-2.6/drivers/mmc/host/msm_sdcc.c:169: error: 'MSM_SDC3_PHYS' undeclared (first use in this function)
linux-2.6/drivers/mmc/host/msm_sdcc.c:171: error: 'MSM_SDC4_PHYS' undeclared (first use in this function)

So we add a Kconfig check to prevent this.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

10, 233 is allocated officially to /dev/kmview which is shipping in
Ubuntu and Debian distributions.  vhost_net seem to have borrowed it
without making a proper request and this causes regressions in the other
distributions.

vhost_net can use a dynamic minor so use that instead.  Also update the
file with a comment to try and avoid future misunderstandings.

cc: stable@kernel.org
Signed-off-by: Alan Cox <device@lanana.org>
[ We should have caught this before 2.6.34 got released.  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a spin_unlock missing on the error path.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E1;
@@

* spin_lock(E1,...);
  <+... when != E1
  if (...) {
    ... when != E1
*   return ...;
  }
  ...+>
* spin_unlock(E1,...);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Avi Kivity <avi@redhat.com>

This is obviously a left-over from the the old interface taking the
size. Apparently a mostly harmless issue with the current iommu_unmap
implementation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

If cr0.wp=0, we have to allow the guest kernel access to a page with pte.w=0.
We do that by setting spte.w=1, since the host cr0.wp must remain set so the
host can write protect pages.  Once we allow write access, we must remove
user access otherwise we mistakenly allow the user to write the page.
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Always invalidate spte and flush TLBs when changing page size, to make
sure different sized translations for the same address are never cached
in a CPU's TLB.

Currently the only case where this occurs is when a non-leaf spte pointer is
overwritten by a leaf, large spte entry. This can happen after dirty
logging is disabled on a memslot, for example.

Noticed by Andrea.

KVM-Stable-Tag
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>