Protect access of TCP_Server_Info::hostname when building the ipc tree
name as it might get freed in cifsd thread and thus causing an
use-after-free bug in __tree_connect_dfs_target().  Also, while at it,
update status of IPC tcon on success and then avoid any extra tree
connects.

Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

TCP_Server_Info::hostname may be updated once or many times during
reconnect, so protect its access outside reconnect path as well and
then prevent any potential use-after-free bugs.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Print full device name (UNC + optional prefix) from @old_ctx->source
when printing info about mount.

Before patch

  mount.cifs //srv/share/dir /mnt -o ...
  dmesg
  ...
  CIFS: Attempting to mount \\srv\share

After patch

  mount.cifs //srv/share/dir /mnt -o ...
  dmesg
  ...
  CIFS: Attempting to mount //srv/share/dir
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Use @ses->ses_lock to protect access of @ses->ses_status.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

The name lengths were incorrect for two create contexts.
     SMB2_CREATE_APP_INSTANCE_ID
     SMB2_CREATE_APP_INSTANCE_VERSION

Update the definitions for these two to match the protocol specs.
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull cifs fixes from Steve French:

 - deferred close fix for an important case when cached file should be
   closed immediately

 - two fixes for missing locks

 - eight minor cleanup

* tag '6.4-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  smb3: move some common open context structs to smbfs_common
  smb3: make query_on_disk_id open context consistent and move to common code
  SMB3.1.1: add new tree connect ShareFlags
  cifs: missing lock when updating session status
  SMB3: Close deferred file handles in case of handle lease break
  SMB3: Add missing locks to protect deferred close file list
  cifs: Avoid a cast in add_lease_context()
  cifs: Simplify SMB2_open_init()
  cifs: Simplify SMB2_open_init()
  cifs: Simplify SMB2_open_init()

Merge tag 'tpmdd-v6.4-rc1-fix-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fix from Jarkko Sakkinen:
 "This fixes a critical bug in my first pull request.

  I fixed the cherry pick issue and tested with real hardare and
  libvirt/qemu plus swtpm"

* tag 'tpmdd-v6.4-rc1-fix-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Re-enable TPM chip boostrapping non-tpm_tis TPM drivers

Pull iommu updates from Joerg Roedel:

 - Convert to platform remove callback returning void

 - Extend changing default domain to normal group

 - Intel VT-d updates:
     - Remove VT-d virtual command interface and IOASID
     - Allow the VT-d driver to support non-PRI IOPF
     - Remove PASID supervisor request support
     - Various small and misc cleanups

 - ARM SMMU updates:
     - Device-tree binding updates:
         * Allow Qualcomm GPU SMMUs to accept relevant clock properties
         * Document Qualcomm 8550 SoC as implementing an MMU-500
         * Favour new "qcom,smmu-500" binding for Adreno SMMUs

     - Fix S2CR quirk detection on non-architectural Qualcomm SMMU
       implementations

     - Acknowledge SMMUv3 PRI queue overflow when consuming events

     - Document (in a comment) why ATS is disabled for bypass streams

 - AMD IOMMU updates:
     - 5-level page-table support
     - NUMA awareness for memory allocations

 - Unisoc driver: Support for reattaching an existing domain

 - Rockchip driver: Add missing set_platform_dma_ops callback

 - Mediatek driver: Adjust the dma-ranges

 - Various other small fixes and cleanups

* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
  iommu: Remove iommu_group_get_by_id()
  iommu: Make iommu_release_device() static
  iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
  iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
  iommu/vt-d: Remove BUG_ON in map/unmap()
  iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
  iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
  iommu/vt-d: Remove BUG_ON on checking valid pfn range
  iommu/vt-d: Make size of operands same in bitwise operations
  iommu/vt-d: Remove PASID supervisor request support
  iommu/vt-d: Use non-privileged mode for all PASIDs
  iommu/vt-d: Remove extern from function prototypes
  iommu/vt-d: Do not use GFP_ATOMIC when not needed
  iommu/vt-d: Remove unnecessary checks in iopf disabling path
  iommu/vt-d: Move PRI handling to IOPF feature path
  iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
  iommu/vt-d: Move iopf code from SVA to IOPF enabling path
  iommu/vt-d: Allow SVA with device-specific IOPF
  dmaengine: idxd: Add enable/disable device IOPF feature
  arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
  ...

Pull compute express link updates from Dan Williams:
 "DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
  blessing, and the CXL core continues to mature its media management
  capabilities with support for listing and injecting media errors. Some
  late fixes that missed v6.3-final are also included:

   - Refactor the DOE infrastructure (Data Object Exchange
     PCI-config-cycle mailbox) to be a facility of the PCI core rather
     than the CXL core.

     This is foundational for upcoming support for PCI
     device-attestation and PCIe / CXL link encryption.

   - Add support for retrieving and injecting poison for CXL memory
     expanders.

     This enabling uses trace-events to convey CXL media error records
     to user tooling. It includes translation of device-local addresses
     (DPA) to system physical addresses (SPA) and their corresponding
     CXL region.

   - Fixes for decoder enumeration that missed v6.3-final

   - Miscellaneous fixups"

* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
  cxl/test: Add mock test for set_timestamp
  cxl/mbox: Update CMD_RC_TABLE
  tools/testing/cxl: Require CONFIG_DEBUG_FS
  tools/testing/cxl: Add a sysfs attr to test poison inject limits
  tools/testing/cxl: Use injected poison for get poison list
  tools/testing/cxl: Mock the Clear Poison mailbox command
  tools/testing/cxl: Mock the Inject Poison mailbox command
  cxl/mem: Add debugfs attributes for poison inject and clear
  cxl/memdev: Trace inject and clear poison as cxl_poison events
  cxl/memdev: Warn of poison inject or clear to a mapped region
  cxl/memdev: Add support for the Clear Poison mailbox command
  cxl/memdev: Add support for the Inject Poison mailbox command
  tools/testing/cxl: Mock support for Get Poison List
  cxl/trace: Add an HPA to cxl_poison trace events
  cxl/region: Provide region info to the cxl_poison trace event
  cxl/memdev: Add trigger_poison_list sysfs attribute
  cxl/trace: Add TRACE support for CXL media-error records
  cxl/mbox: Add GET_POISON_LIST mailbox command
  cxl/mbox: Initialize the poison state
  cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
  ...

Pull s390 updates from Vasily Gorbik:

 - Add support for stackleak feature. Also allow specifying
   architecture-specific stackleak poison function to enable faster
   implementation. On s390, the mvc-based implementation helps decrease
   typical overhead from a factor of 3 to just 25%

 - Convert all assembler files to use SYM* style macros, deprecating the
   ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS

 - Improve KASLR to also randomize module and special amode31 code base
   load addresses

 - Rework decompressor memory tracking to support memory holes and
   improve error handling

 - Add support for protected virtualization AP binding

 - Add support for set_direct_map() calls

 - Implement set_memory_rox() and noexec module_alloc()

 - Remove obsolete overriding of mem*() functions for KASAN

 - Rework kexec/kdump to avoid using nodat_stack to call purgatory

 - Convert the rest of the s390 code to use flexible-array member
   instead of a zero-length array

 - Clean up uaccess inline asm

 - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE

 - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
   DEBUG_FORCE_FUNCTION_ALIGN_64B

 - Resolve last_break in userspace fault reports

 - Simplify one-level sysctl registration

 - Clean up branch prediction handling

 - Rework CPU counter facility to retrieve available counter sets just
   once

 - Other various small fixes and improvements all over the code

* tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits)
  s390/stackleak: provide fast __stackleak_poison() implementation
  stackleak: allow to specify arch specific stackleak poison function
  s390: select ARCH_USE_SYM_ANNOTATIONS
  s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
  s390: wire up memfd_secret system call
  s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
  s390/mm: use BIT macro to generate SET_MEMORY bit masks
  s390/relocate_kernel: adjust indentation
  s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
  s390/entry: use SYM* macros instead of ENTRY(), etc.
  s390/purgatory: use SYM* macros instead of ENTRY(), etc.
  s390/kprobes: use SYM* macros instead of ENTRY(), etc.
  s390/reipl: use SYM* macros instead of ENTRY(), etc.
  s390/head64: use SYM* macros instead of ENTRY(), etc.
  s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
  s390/mcount: use SYM* macros instead of ENTRY(), etc.
  s390/crc32le: use SYM* macros instead of ENTRY(), etc.
  s390/crc32be: use SYM* macros instead of ENTRY(), etc.
  s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
  s390/amode31: use SYM* macros instead of ENTRY(), etc.
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Refactor scripts/kallsyms to make it faster and easier to maintain

 - Clean up menuconfig

 - Provide Clang with hard-coded target triple instead of CROSS_COMPILE

 - Use -z pack-relative-relocs flags instead of --use-android-relr-tags
   for arm64 CONFIG_RELR

 - Add srcdeb-pkg target to build only a Debian source package

 - Add KDEB_SOURCE_COMPRESS option to specify the compression for a
   Debian source package

 - Misc cleanups and fixes

* tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: deb-pkg: specify targets in debian/rules as .PHONY
  sparc: unify sparc32/sparc64 archhelp
  kbuild: rpm-pkg: remove kernel-drm PROVIDES
  kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression
  kbuild: add srcdeb-pkg target
  Makefile: use -z pack-relative-relocs
  kbuild: clang: do not use CROSS_COMPILE for target triple
  kconfig: menuconfig: reorder functions to remove forward declarations
  kconfig: menuconfig: remove unused M_EVENT macro
  kconfig: menuconfig: remove OLD_NCURSES macro
  kbuild: builddeb: Eliminate debian/arch use
  scripts/kallsyms: update the usage in the comment block
  scripts/kallsyms: decrease expand_symbol() / cleanup_symbol_name() calls
  scripts/kallsyms: change the output order
  scripts/kallsyms: move compiler-generated symbol patterns to mksysmap
  scripts/kallsyms: exclude symbols generated by itself dynamically
  scripts/mksysmap: use sed with in-line comments
  scripts/mksysmap: remove comments described in nm(1)
  scripts/kallsyms: remove redundant code for omitting U and N
  kallsyms: expand symbol name into comment for debugging

Pull rust updates from Miguel Ojeda
 "More additions to the Rust core. Importantly, this adds the pin-init
  API, which will be used by other abstractions, such as the
  synchronization ones added here too:

   - pin-init API: a solution for the safe pinned initialization
     problem.

     This allows to reduce the need for 'unsafe' code in the kernel when
     dealing with data structures that require a stable address. Commit
     90e53c5e ("rust: add pin-init API core") contains a nice
     introduction -- here is an example of how it looks like:

        #[pin_data]
        struct Example {
            #[pin]
            value: Mutex<u32>,

            #[pin]
            value_changed: CondVar,
        }

        impl Example {
            fn new() -> impl PinInit<Self> {
                pin_init!(Self {
                    value <- new_mutex!(0),
                    value_changed <- new_condvar!(),
                })
            }
        }

        // In a `Box`.
        let b = Box::pin_init(Example::new())?;

        // In the stack.
        stack_pin_init!(let s = Example::new());

   - 'sync' module:

     New types 'LockClassKey' ('struct lock_class_key'), 'Lock',
     'Guard', 'Mutex' ('struct mutex'), 'SpinLock' ('spinlock_t'),
     'LockedBy' and 'CondVar' (uses 'wait_queue_head_t'), plus macros
     such as 'static_lock_class!' and 'new_spinlock!'.

     In particular, 'Lock' and 'Guard' are generic implementations that
     contain code that is common to all locks. Then, different backends
     (the new 'Backend' trait) are implemented and used to define types
     like 'Mutex':

        type Mutex<T> = Lock<T, MutexBackend>;

     In addition, new methods 'assume_init()', 'init_with()' and
     'pin_init_with()' for 'UniqueArc<MaybeUninit<T>>' and 'downcast()'
     for 'Arc<dyn Any + Send + Sync>'; as well as 'Debug' and 'Display'
     implementations for 'Arc' and 'UniqueArc'. Reduced stack usage of
     'UniqueArc::try_new_uninit()', too.

   - 'types' module:

     New trait 'AlwaysRefCounted' and new type 'ARef' (an owned
     reference to an always-reference-counted object, meant to be used
     in wrappers for C types that have their own ref counting
     functions).

     Moreover, new associated functions 'raw_get()' and 'ffi_init()' for
     'Opaque'.

   - New 'task' module with a new type 'Task' ('struct task_struct'),
     and a new macro 'current!' to safely get a reference to the current
     one.

   - New 'ioctl' module with new '_IOC*' const functions (equivalent to
     the C macros).

   - New 'uapi' crate, intended to be accessible by drivers directly.

   - 'macros' crate: new 'quote!' macro (similar to the one provided in
     userspace by the 'quote' crate); and the 'module!' macro now allows
     specifying multiple module aliases.

   - 'error' module:

     New associated functions for the 'Error' type, such as
     'from_errno()' and new functions such as 'to_result()'.

   - 'alloc' crate:

     More fallible 'Vec' methods: 'try_resize` and
     'try_extend_from_slice' and the infrastructure (imported from the
     Rust standard library) they need"

* tag 'rust-6.4' of https://github.com/Rust-for-Linux/linux: (44 commits)
  rust: ioctl: Add ioctl number manipulation functions
  rust: uapi: Add UAPI crate
  rust: sync: introduce `CondVar`
  rust: lock: add `Guard::do_unlocked`
  rust: sync: introduce `LockedBy`
  rust: introduce `current`
  rust: add basic `Task`
  rust: introduce `ARef`
  rust: lock: introduce `SpinLock`
  rust: lock: introduce `Mutex`
  rust: sync: introduce `Lock` and `Guard`
  rust: sync: introduce `LockClassKey`
  MAINTAINERS: add Benno Lossin as Rust reviewer
  rust: init: broaden the blanket impl of `Init`
  rust: sync: add functions for initializing `UniqueArc<MaybeUninit<T>>`
  rust: sync: reduce stack usage of `UniqueArc::try_new_uninit`
  rust: types: add `Opaque::ffi_init`
  rust: prelude: add `pin-init` API items to prelude
  rust: init: add `Zeroable` trait and `init::zeroed` function
  rust: init: add `stack_pin_init!` macro
  ...

Pull EFI updates from Ard Biesheuvel:

 - relocate the LoongArch kernel if the preferred address is already
   occupied

 - implement BTI annotations for arm64 EFI stub and zboot images

 - clean up arm64 zboot Kbuild rules for injecting the kernel code size

* tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/zboot: arm64: Grab code size from ELF symbol in payload
  efi/zboot: arm64: Inject kernel code size symbol into the zboot payload
  efi/zboot: Set forward edge CFI compat header flag if supported
  efi/zboot: Add BSS padding before compression
  arm64: efi: Enable BTI codegen and add PE/COFF annotation
  efi/pe: Import new BTI/IBT header flags from the spec
  efi/loongarch: Reintroduce efi_relocate_kernel() to relocate kernel

Pull power supply and reset updates from Sebastian Reichel:

 - power-supply core support for automatic handling of constant battery
   data supplied by firmware

 - generic-adc-battery: major cleanup

 - axp288_charger: fix ACPI issues on x86 Android tablets

 - rk817: cleanup and fix handling for low state of charge

* tag 'for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (26 commits)
  power: supply: rk817: Fix low SOC bugs
  power: supply: rk817: Drop unneeded debugging code
  power: supply: axp288_charger: Use alt usb-id extcon on some x86 android tablets
  power: supply: generic-adc-battery: style fixes
  power: supply: generic-adc-battery: improve error message
  power: supply: generic-adc-battery: update copyright info
  power: supply: generic-adc-battery: add DT support
  power: supply: generic-adc-battery: add temperature support
  power: supply: generic-adc-battery: simplify read_channel logic
  power: supply: generic-adc-battery: use simple-battery API
  power: supply: generic-adc-battery: drop memory alloc error message
  power: supply: generic-adc-battery: drop charge now support
  power: supply: generic-adc-battery: drop jitter delay support
  power: supply: generic-adc-battery: fix unit scaling
  power: supply: generic-adc-battery: convert to managed resources
  power: supply: core: auto-exposure of simple-battery data
  dt-bindings: power: supply: adc-battery: add binding
  power: supply: bq256xx: Support to disable charger
  power: supply: charger-manager: Use of_property_read_bool() for boolean properties
  power: reset: qcom-pon: drop of_match_ptr for ID table
  ...

Pull clk updates from Stephen Boyd:
 "Nothing looks out of the ordinary in this batch of clk driver updates.

  There are a couple patches to the core clk framework, but they're all
  basically cleanups or debugging aids. The driver updates and new
  additions are dominated in the diffstat by Qualcomm and MediaTek
  drivers. Qualcomm gained a handful of new drivers for various SoCs,
  and MediaTek gained a bunch of drivers for MT8188. The MediaTek
  drivers are being modernized as well, so there are updates all over
  that vendor's clk drivers. There's also a couple other new clk drivers
  in here, for example the Starfive JH7110 SoC support is added.

  Outside of the two major SoC vendors though, we have the usual
  collection of non-critical fixes and cleanups to various clk drivers.
  It's good to see that we're getting more cleanups and modernization
  patches. Maybe one day we'll be able to properly split clk providers
  from clk consumers.

  Core:
   - Print an informational message before disabling unused clks

  New Drivers:
   - BCM63268 timer clock and reset controller
   - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
     MT8195 SoCs
   - Mediatek MT8188 SoC clk drivers
   - Clock driver for Sunplus SP7021 SoC
   - Clk driver support for Loongson-2 SoCs
   - Clock driver for Skyworks Si521xx I2C PCIe clock generators
   - Initial Starfive JH7110 clk/reset support
   - Global clock controller drivers for Qualcomm SM7150, IPQ9574,
     MSM8917 and IPQ5332 SoCs
   - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
     SoCs

  Updates:
   - Shrink size of clk_fractional_divider a little
   - Convert various clk drivers to devm_of_clk_add_hw_provider()
   - Convert platform clk drivers to remove_new()
   - Converted most Mediatek clock drivers to struct platform_driver
   - MediaTek clock drivers can be built as modules
   - Reimplement Loongson-1 clk driver with DT support
   - Migrate socfpga clk driver to of_clk_add_hw_provider()
   - Support for i3c clks on Aspeed ast2600 SoCs
   - Add clock generic devm_clk_hw_register_gate_parent_data
   - Add audiomix block control for i.MX8MP
   - Add support for determine_rate to i.MX composite-8m
   - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
   - Provide clock name in error message for clk-gpr-mux on get parent
     failure
   - Drop duplicate imx_clk_mux_flags macro
   - Register the i.MX8MP Media Disp2 Pix clock as bus clock
   - Add Media LDB root clock to i.MX8MP
   - Make i.MX8MP nand_usdhc_bus clock as non-critical
   - Fix the rate table for i.MX fracn-gppll
   - Disable HW control for the fracn-gppll in order to be controlled by
     register write
   - Add support for interger PLL in fracn-gppll
   - Add mcore_booted module parameter to i.MX93 provider
   - Add NIC, A55 and ARM PLL clocks to i.MX93
   - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
   - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
     to get more accurate clock rates
   - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
   - Update some of the i.MX critical clocks flags to allow glitchless
     on-the-fly rate change.
   - Add I2C5 clock on Renesas R-Car V3H
   - Exynos850: Add CMU_G3D clock controller for the Mali GPU
   - Extract Exynos5433 (ARM64) clock controller power management code
     to common driver parts
   - Exynos850: make PMU_ALIVE_PCLK clock critical
   - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
     Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
     V4H
   - Add video capture (VIN) clocks on Renesas R-Car V3H
   - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
   - Support for Stromer Plus PLL on Qualcomm IPQ5332
   - Add a missing reset to Qualcomm QCM2290
   - Migrate Qualcomm IPQ4019 to clk_parent_data
   - Make USB GDSCs enter retention state when disabled on Qualcomm
     SM6375, MSM8996 and MSM8998 SoCs
   - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
   - Add two EMAC GDSCs on Qualcomm SC8280XP
   - Use shared rcg clk ops in Qualcomm SM6115 GCC
   - Park Qualcomm SM8350 PCIe PIPE clks when disabled
   - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
   - Add missing XO clocks to Qualcomm MSM8226 and MSM8974
   - Convert some Qualcomm clk DT bindings to YAML
   - Reparenting fix for the clock supplying camera modules on Rockchip
     rk3399
   - Mark more critical (bus-)clocks on Rockchip rk3588"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
  clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
  clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
  clk: rockchip: rk3588: make gate linked clocks critical
  clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
  clk: qcom: add the GPUCC driver for sa8775p
  dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
  clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
  clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
  clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
  dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
  clk: starfive: Avoid casting iomem pointers
  clk: microchip: fix potential UAF in auxdev release callback
  clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
  clk: mediatek: fhctl: Mark local variables static
  clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
  clk: uniphier: Use managed `of_clk_add_hw_provider()`
  clk: si5351: Use managed `of_clk_add_hw_provider()`
  clk: si570: Use managed `of_clk_add_hw_provider()`
  clk: si514: Use managed `of_clk_add_hw_provider()`
  clk: lmk04832: Use managed `of_clk_add_hw_provider()`
  ...

Pull rdma updates from Jason Gunthorpe:
 "Usual wide collection of unrelated items in drivers:

   - Driver bug fixes and treewide cleanups in hfi1, siw, qib, mlx5,
     rxe, usnic, usnic, bnxt_re, ocrdma, iser:
       - remove unnecessary NULL checks
       - kmap obsolescence
       - pci_enable_pcie_error_reporting() obsolescence
       - unused variables and macros
       - trace event related warnings
       - casting warnings

   - Code cleanups for irdm and erdma

   - EFA reporting of 128 byte PCIe TLP support

   - mlx5 more agressively uses the out of order HW feature

   - Big rework of how state machines and tasks work in rxe

   - Fix a syzkaller found crash netdev refcount leak in siw

   - bnxt_re revises their HW description header

   - Congestion control for bnxt_re

   - Use mmu_notifiers more safely in hfi1

   - mlx5 gets better support for PCIe relaxed ordering inside VMs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (81 commits)
  RDMA/efa: Add rdma write capability to device caps
  RDMA/mlx5: Use correct device num_ports when modify DC
  RDMA/irdma: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() call
  RDMA/rxe: Fix spinlock recursion deadlock on requester
  RDMA/mlx5: Fix flow counter query via DEVX
  RDMA/rxe: Protect QP state with qp->state_lock
  RDMA/rxe: Move code to check if drained to subroutine
  RDMA/rxe: Remove qp->req.state
  RDMA/rxe: Remove qp->comp.state
  RDMA/rxe: Remove qp->resp.state
  RDMA/mlx5: Allow relaxed ordering read in VFs and VMs
  net/mlx5: Update relaxed ordering read HCA capabilities
  RDMA/mlx5: Check pcie_relaxed_ordering_enabled() in UMR
  RDMA/mlx5: Remove pcie_relaxed_ordering_enabled() check for RO write
  RDMA: Add ib_virt_dma_to_page()
  RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"
  RDMA/irdma: Slightly optimize irdma_form_ah_cm_frame()
  RDMA/rxe: Fix incorrect TASKLET_STATE_SCHED check in rxe_task.c
  IB/hfi1: Place struct mmu_rb_handler on cache line start
  IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests
  ...

Pull ksmbd server updates from Steve French:

 - SMB3.1.1 negotiate context fixes and cleanup

 - new lock_rename_child VFS helper

 - ksmbd fix to avoid unlink race and to use the new VFS helper to avoid
   rename race

* tag '6.4-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix racy issue from using ->d_parent and ->d_name
  ksmbd: remove unused compression negotiate ctx packing
  ksmbd: avoid duplicate negotiate ctx offset increments
  ksmbd: set NegotiateContextCount once instead of every inc
  fs: introduce lock_rename_child() helper
  ksmbd: remove internal.h include

Pull nfsd updates from Chuck Lever:
 "The big ticket item for this release is that support for RPC-with-TLS
  [RFC 9289] has been added to the Linux NFS server.

  The goal is to provide a simple-to-deploy, low-overhead in-transit
  confidentiality and peer authentication mechanism. It can supplement
  NFS Kerberos and it can protect the use of legacy non-cryptographic
  user authentication flavors such as AUTH_SYS. The TLS Record protocol
  is handled entirely by kTLS, meaning it can use either software
  encryption or offload encryption to smart NICs.

  Aside from that, work continues on improving NFSD's open file cache.
  Among the many clean-ups in that area is a patch to convert the
  rhashtable to use the list-hashing version of that data structure"

* tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
  NFSD: Handle new xprtsec= export option
  SUNRPC: Support TLS handshake in the server-side TCP socket code
  NFSD: Clean up xattr memory allocation flags
  NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop
  SUNRPC: Clear rq_xid when receiving a new RPC Call
  SUNRPC: Recognize control messages in server-side TCP socket code
  SUNRPC: Be even lazier about releasing pages
  SUNRPC: Convert svc_xprt_release() to the release_pages() API
  SUNRPC: Relocate svc_free_res_pages()
  nfsd: simplify the delayed disposal list code
  SUNRPC: Ignore return value of ->xpo_sendto
  SUNRPC: Ensure server-side sockets have a sock->file
  NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor()
  sunrpc: simplify two-level sysctl registration for svcrdma_parm_table
  SUNRPC: return proper error from get_expiry()
  lockd: add some client-side tracepoints
  nfs: move nfs_fhandle_hash to common include file
  lockd: server should unlock lock if client rejects the grant
  lockd: fix races in client GRANTED_MSG wait logic
  lockd: move struct nlm_wait to lockd.h
  ...

Pull NFS client updates from Anna Schumaker:
 "New Features:

   - Convert the readdir path to use folios

   - Convert the NFS fscache code to use netfs

  Bugfixes and Cleanups:

   - Always send a RECLAIM_COMPLETE after establishing a lease

   - Simplify sysctl registrations and other cleanups

   - Handle out-of-order write replies on NFS v3

   - Have sunrpc call_bind_status use standard hard/soft task semantics

   - Other minor cleanups"

* tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.2: Rework scratch handling for READ_PLUS
  NFS: Cleanup unused rpc_clnt variable
  NFS: set varaiable nfs_netfs_debug_id storage-class-specifier to static
  SUNRPC: remove the maximum number of retries in call_bind_status
  NFS: Convert readdir page array functions to use a folio
  NFS: Convert the readdir array-of-pages into an array-of-folios
  NFSv3: handle out-of-order write replies.
  NFS: Remove fscache specific trace points and NFS_INO_FSCACHE bit
  NFS: Remove all NFSIOS_FSCACHE counters due to conversion to netfs API
  NFS: Convert buffered read paths to use netfs when fscache is enabled
  NFS: Configure support for netfs when NFS fscache is configured
  NFS: Rename readpage_async_filler to nfs_read_add_folio
  sunrpc: simplify one-level sysctl registration for debug_table
  sunrpc: move sunrpc_table and proc routines above
  sunrpc: simplify one-level sysctl registration for xs_tunables_table
  sunrpc: simplify one-level sysctl registration for xr_tunables_table
  nfs: simplify two-level sysctl registration for nfs_cb_sysctls
  nfs: simplify two-level sysctl registration for nfs4_cb_sysctls
  lockd: simplify two-level sysctl registration for nlm_sysctls
  NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease

Pull ntfs3 updates from Konstantin Komarov:
 "New code:

   - add missed "nocase" in ntfs_show_options

   - extend information on failures/errors

   - small optimizations

  Fixes:

   - some logic errors

   - some dead code was removed

   - code is refactored and reformatted according to the new version of
     clang-format

  Code removal:

   - 'noacsrules' option.

     Currently, this option does not work properly, and its use leads to
     unstable results. If we figure out how to implement it without
     errors, we will add it later

   - writepage"

* tag 'ntfs3_for_6.4' of https://github.com/Paragon-Software-Group/linux-ntfs3: (30 commits)
  fs/ntfs3: Fix root inode checking
  fs/ntfs3: Print details about mount fails
  fs/ntfs3: Add missed "nocase" in ntfs_show_options
  fs/ntfs3: Code formatting and refactoring
  fs/ntfs3: Changed ntfs_get_acl() to use dentry
  fs/ntfs3: Remove field sbi->used.bitmap.set_tail
  fs/ntfs3: Undo critial modificatins to keep directory consistency
  fs/ntfs3: Undo endian changes
  fs/ntfs3: Optimization in ntfs_set_state()
  fs/ntfs3: Fix ntfs_create_inode()
  fs/ntfs3: Remove noacsrules
  fs/ntfs3: Use bh_read to simplify code
  fs/ntfs3: Fix a possible null-pointer dereference in ni_clear()
  fs/ntfs3: Refactoring of various minor issues
  fs/ntfs3: Restore overflow checking for attr size in mi_enum_attr
  fs/ntfs3: Check for extremely large size of $AttrDef
  fs/ntfs3: Improved checking of attribute's name length
  fs/ntfs3: Add null pointer checks
  fs/ntfs3: fix spelling mistake "attibute" -> "attribute"
  fs/ntfs3: Add length check in indx_get_root
  ...

Pull xfs updates from Dave Chinner:
 "This consists mainly of online scrub functionality and the design
  documentation for the upcoming online repair functionality built on
  top of the scrub code:

   - Added detailed design documentation for the upcoming online repair
     feature

   - major update to online scrub to complete the reverse mapping
     cross-referencing infrastructure enabling us to fully validate
     allocated metadata against owner records. This is the last piece of
     scrub infrastructure needed before we can start merging online
     repair functionality.

   - Fixes for the ascii-ci hashing issues

   - deprecation of the ascii-ci functionality

   - on-disk format verification bug fixes

   - various random bug fixes for syzbot and other bug reports"

* tag 'xfs-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (107 commits)
  xfs: fix livelock in delayed allocation at ENOSPC
  xfs: Extend table marker on deprecated mount options table
  xfs: fix duplicate includes
  xfs: fix BUG_ON in xfs_getbmap()
  xfs: verify buffer contents when we skip log replay
  xfs: _{attr,data}_map_shared should take ILOCK_EXCL until iread_extents is completely done
  xfs: remove WARN when dquot cache insertion fails
  xfs: don't consider future format versions valid
  xfs: deprecate the ascii-ci feature
  xfs: test the ascii case-insensitive hash
  xfs: stabilize the dirent name transformation function used for ascii-ci dir hash computation
  xfs: cross-reference rmap records with refcount btrees
  xfs: cross-reference rmap records with inode btrees
  xfs: cross-reference rmap records with free space btrees
  xfs: cross-reference rmap records with ag btrees
  xfs: introduce bitmap type for AG blocks
  xfs: convert xbitmap to interval tree
  xfs: drop the _safe behavior from the xbitmap foreach macro
  xfs: don't load local xattr values during scrub
  xfs: remove the for_each_xbitmap_ helpers
  ...

Pull iomap updates from Darrick Wong:
 "The only changes for this cycle are the addition of tracepoints to the
  iomap directio code so that Ritesh (who is working on porting ext2 to
  iomap) can observe the io flows more easily.

  Summary:

   - Remove an unused symbol

   - Add tracepoints for the directio code"

* tag 'iomap-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Add DIO tracepoints
  iomap: Remove IOMAP_DIO_NOSYNC unused dio flag
  fs.h: Add TRACE_IOCB_STRINGS for use in trace points

Pull dma-mapping updates from Christoph Hellwig:

 - fix a PageHighMem check in dma-coherent initialization (Doug Berger)

 - clean up the coherency defaul initialiation (Jiaxun Yang)

 - add cacheline to user/kernel dma-debug space dump messages (Desnes
   Nunes, Geert Uytterhoeve)

 - swiotlb statistics improvements (Michael Kelley)

 - misc cleanups (Petr Tesarik)

* tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
  swiotlb: track and report io_tlb_used high water marks in debugfs
  swiotlb: fix debugfs reporting of reserved memory pools
  swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
  of: address: always use dma_default_coherent for default coherency
  dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
  dma-mapping: provide a fallback dma_default_coherent
  dma-debug: Use %pa to format phys_addr_t
  dma-debug: add cacheline to user/kernel space dump messages
  dma-debug: small dma_debug_entry's comment and variable name updates
  dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask

Pull more timer updates from Thomas Gleixner:
 "Timekeeping and clocksource/event driver updates the second batch:

   - A trivial documentation fix in the timekeeping core

   - A really boring set of small fixes, enhancements and cleanups in
     the drivers code. No new clocksource/clockevent drivers for a
     change"

* tag 'timers-core-2023-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Fix references to nonexistent ktime_get_fast_ns()
  dt-bindings: timer: rockchip: Add rk3588 compatible
  dt-bindings: timer: rockchip: Drop superfluous rk3288 compatible
  clocksource/drivers/ti: Use of_property_read_bool() for boolean properties
  clocksource/drivers/timer-ti-dm: Fix finding alwon timer
  clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails
  clocksource/drivers/stm32-lp: Drop of_match_ptr for ID table
  clocksource/drivers/timer-ti-dm: Convert to platform remove callback returning void
  clocksource/drivers/timer-tegra186: Convert to platform remove callback returning void
  clocksource/drivers/timer-ti-dm: Improve error message in .remove
  clocksource/drivers/timer-stm32-lp: Mark driver as non-removable
  clocksource/drivers/sh_mtu2: Mark driver as non-removable
  clocksource/drivers/timer-ti-dm: Use of_address_to_resource()
  clocksource/drivers/timer-imx-gpt: Remove non-DT function
  clocksource/drivers/timer-mediatek: Split out CPUXGPT timers
  clocksource/drivers/exynos_mct: Explicitly return 0 for shared timer

Pull lsm fix from Paul Moore:
 "A single Documentation/LSM fix to update the LSM hook documentation
  references from lsm_hooks.h to security.c"

* tag 'lsm-pr-20230428' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: move hook comments docs to security/security.c

Pull integrity update from Mimi Zohar:
 "Just one one bug fix. Other integrity changes are being upstreamed via
  the tpm and lsm trees"

* tag 'integrity-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  IMA: allow/fix UML builds

Pull cgroup updates from Tejun Heo:

 - cpuset changes including the fix for an incorrect interaction with
   CPU hotplug and an optimization

 - Other doc and cosmetic changes

* tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs: cgroup-v1/cpusets: update libcgroup project link
  cgroup/cpuset: Minor updates to test_cpuset_prs.sh
  cgroup/cpuset: Include offline CPUs when tasks' cpumasks in top_cpuset are updated
  cgroup/cpuset: Skip task update if hotplug doesn't affect current cpuset
  cpuset: Clean up cpuset_node_allowed
  cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers

Pull workqueue updates from Tejun Heo:
 "Mostly changes from Petr to improve warning and error reporting.

  Workqueue now reports more of the relevant failures with better
  context which should help debugging"

* tag 'wq-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Introduce show_freezable_workqueues
  workqueue: Print backtraces from CPUs with hung CPU bound workqueues
  workqueue: Warn when a rescuer could not be created
  workqueue: Interrupted create_worker() is not a repeated event
  workqueue: Warn when a new worker could not be created
  workqueue: Fix hung time report of worker pools
  workqueue: Simplify a pr_warn() call in wq_select_unbound_cpu()
  MAINTAINERS: Add workqueue_internal.h to the WORKQUEUE entry

From 2.42 to 2.43
Signed-off-by: Steve French <stfrench@microsoft.com>

create durable and create durable reconnect context and the maximal
access create context struct definitions can be put in common code in
smbfs_common
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs and ksmbd were using a slightly different version of the query_on_disk_id
struct which could be confusing. Use the ksmbd version of this struct, and
move it to common code.
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Also update these flag names in a few places to match the simpler
easier to understand names now used in the protocol documentation
(see MS-SMB2 section 2.2.10)
Acked-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Coverity noted a place where we were not grabbing
the ses_lock when setting (and checking) ses_status.

Addresses-Coverity: 1536833 ("Data race condition (MISSING_LOCK)")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull RISC-V updates from Palmer Dabbelt:

 - Support for runtime detection of the Svnapot extension

 - Support for Zicboz when clearing pages

 - We've moved to GENERIC_ENTRY

 - Support for !MMU on rv32 systems

 - The linear region is now mapped via huge pages

 - Support for building relocatable kernels

 - Support for the hwprobe interface

 - Various fixes and cleanups throughout the tree

* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
  RISC-V: hwprobe: Explicity check for -1 in vdso init
  RISC-V: hwprobe: There can only be one first
  riscv: Allow to downgrade paging mode from the command line
  dt-bindings: riscv: add sv57 mmu-type
  RISC-V: hwprobe: Remove __init on probe_vendor_features()
  riscv: Use --emit-relocs in order to move .rela.dyn in init
  riscv: Check relocations at compile time
  powerpc: Move script to check relocations at compile time in scripts/
  riscv: Introduce CONFIG_RELOCATABLE
  riscv: Move .rela.dyn outside of init to avoid empty relocations
  riscv: Prepare EFI header for relocatable kernels
  riscv: Unconditionnally select KASAN_VMALLOC if KASAN
  riscv: Fix ptdump when KASAN is enabled
  riscv: Fix EFI stub usage of KASAN instrumented strcmp function
  riscv: Move DTB_EARLY_BASE_VA to the kernel address space
  riscv: Rework kasan population functions
  riscv: Split early and final KASAN population functions
  riscv: Use PUD/P4D/PGD pages for the linear mapping
  riscv: Move the linear mapping creation in its own function
  riscv: Get rid of riscv_pfn_base variable
  ...

Pull m68knommu updates from Greg Ungerer:
 "A couple of minor changes.

  One to remove the long dead uclinux.org web address and email list
  from the MAINTAINERS entry for UCLINUX.

  The other to remove dead config options in the m68knommu Kconfig"

* tag 'm68knommu-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: Kconfig.machine: remove obsolete configs ROMBASE and ROMSIZE
  MAINTAINERS: drop uclinux.org

Pull powerpc updates from Michael Ellerman:

 - Add support for building the kernel using PC-relative addressing on
   Power10.

 - Allow HV KVM guests on Power10 to use prefixed instructions.

 - Unify support for the P2020 CPU (85xx) into a single machine
   description.

 - Always build the 64-bit kernel with 128-bit long double.

 - Drop support for several obsolete 2000's era development boards as
   identified by Paul Gortmaker.

 - A series fixing VFIO on Power since some generic changes.

 - Various other small features and fixes.

Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.

* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
  powerpc/64s: Disable pcrel code model on Clang
  powerpc: Fix merge conflict between pcrel and copy_thread changes
  powerpc/configs/powernv: Add IGB=y
  powerpc/configs/64s: Drop JFS Filesystem
  powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
  powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
  powerpc/configs: Make pseries_le an alias for ppc64le_guest
  powerpc/configs: Incorporate generic kvm_guest.config into guest configs
  powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
  powerpc/configs/64s: Enable Device Mapper options
  powerpc/configs/64s: Enable PSTORE
  powerpc/configs/64s: Enable VLAN support
  powerpc/configs/64s: Enable BLK_DEV_NVME
  powerpc/configs/64s: Drop REISERFS
  powerpc/configs/64s: Use SHA512 for module signatures
  powerpc/configs/64s: Enable IO_STRICT_DEVMEM
  powerpc/configs/64s: Enable SCHEDSTATS
  powerpc/configs/64s: Enable DEBUG_VM & other options
  powerpc/configs/64s: Enable EMULATED_STATS
  powerpc/configs/64s: Enable KUNIT and most tests
  ...

Pull tracing tools updates from Steven Rostedt:

 - Add auto-analysis only option to rtla/timerlat

   Add an --aa-only option to the tooling to perform only the auto
   analysis and not to parse and format the data.

 - Other minor fixes and clean ups

* tag 'trace-tools-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rtla/timerlat: Fix "Previous IRQ" auto analysis' line
  rtla/timerlat: Add auto-analysis only option
  rv: Remove redundant assignment to variable retval
  rv: Fix addition on an uninitialized variable 'run'
  rtla: Add .gitignore file

Pull tracing updates from Steven Rostedt:

 - User events are finally ready!

   After lots of collaboration between various parties, we finally
   locked down on a stable interface for user events that can also work
   with user space only tracing.

   This is implemented by telling the kernel (or user space library, but
   that part is user space only and not part of this patch set), where
   the variable is that the application uses to know if something is
   listening to the trace.

   There's also an interface to tell the kernel about these events,
   which will show up in the /sys/kernel/tracing/events/user_events/
   directory, where it can be enabled.

   When it's enabled, the kernel will update the variable, to tell the
   application to start writing to the kernel.

   See https://lwn.net/Articles/927595/

 - Cleaned up the direct trampolines code to simplify arm64 addition of
   direct trampolines.

   Direct trampolines use the ftrace interface but instead of jumping to
   the ftrace trampoline, applications (mostly BPF) can register their
   own trampoline for performance reasons.

 - Some updates to the fprobe infrastructure. fprobes are more efficient
   than kprobes, as it does not need to save all the registers that
   kprobes on ftrace do. More work needs to be done before the fprobes
   will be exposed as dynamic events.

 - More updates to references to the obsolete path of
   /sys/kernel/debug/tracing for the new /sys/kernel/tracing path.

 - Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer
   line by line instead of all at once.

   There are users in production kernels that have a large data dump
   that originally used printk() directly, but the data dump was larger
   than what printk() allowed as a single print.

   Using seq_buf() to do the printing fixes that.

 - Add /sys/kernel/tracing/touched_functions that shows all functions
   that was every traced by ftrace or a direct trampoline. This is used
   for debugging issues where a traced function could have caused a
   crash by a bpf program or live patching.

 - Add a "fields" option that is similar to "raw" but outputs the fields
   of the events. It's easier to read by humans.

 - Some minor fixes and clean ups.

* tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits)
  ring-buffer: Sync IRQ works before buffer destruction
  tracing: Add missing spaces in trace_print_hex_seq()
  ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
  recordmcount: Fix memory leaks in the uwrite function
  tracing/user_events: Limit max fault-in attempts
  tracing/user_events: Prevent same address and bit per process
  tracing/user_events: Ensure bit is cleared on unregister
  tracing/user_events: Ensure write index cannot be negative
  seq_buf: Add seq_buf_do_printk() helper
  tracing: Fix print_fields() for __dyn_loc/__rel_loc
  tracing/user_events: Set event filter_type from type
  ring-buffer: Clearly check null ptr returned by rb_set_head_page()
  tracing: Unbreak user events
  tracing/user_events: Use print_format_fields() for trace output
  tracing/user_events: Align structs with tabs for readability
  tracing/user_events: Limit global user_event count
  tracing/user_events: Charge event allocs to cgroups
  tracing/user_events: Update documentation for ABI
  tracing/user_events: Use write ABI in example
  tracing/user_events: Add ABI self-test
  ...

Pull SMP cross-CPU function-call updates from Ingo Molnar:

 - Remove diagnostics and adjust config for CSD lock diagnostics

 - Add a generic IPI-sending tracepoint, as currently there's no easy
   way to instrument IPI origins: it's arch dependent and for some major
   architectures it's not even consistently available.

* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  trace,smp: Trace all smp_function_call*() invocations
  trace: Add trace_ipi_send_cpu()
  sched, smp: Trace smp callback causing an IPI
  smp: reword smp call IPI comment
  treewide: Trace IPIs sent via smp_send_reschedule()
  irq_work: Trace self-IPIs sent via arch_irq_work_raise()
  smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
  sched, smp: Trace IPIs sent via send_call_function_single_ipi()
  trace: Add trace_ipi_send_cpumask()
  kernel/smp: Make csdlock_debug= resettable
  locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
  locking/csd_lock: Remove added data from CSD lock debugging
  locking/csd_lock: Add Kconfig option for csd_debug default

Pull scheduler updates from Ingo Molnar:

 - Allow unprivileged PSI poll()ing

 - Fix performance regression introduced by mm_cid

 - Improve livepatch stalls by adding livepatch task switching to
   cond_resched(). This resolves livepatching busy-loop stalls with
   certain CPU-bound kthreads

 - Improve sched_move_task() performance on autogroup configs

 - On core-scheduling CPUs, avoid selecting throttled tasks to run

 - Misc cleanups, fixes and improvements

* tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/clock: Fix local_clock() before sched_clock_init()
  sched/rt: Fix bad task migration for rt tasks
  sched: Fix performance regression introduced by mm_cid
  sched/core: Make sched_dynamic_mutex static
  sched/psi: Allow unprivileged polling of N*2s period
  sched/psi: Extract update_triggers side effect
  sched/psi: Rename existing poll members in preparation
  sched/psi: Rearrange polling code in preparation
  sched/fair: Fix inaccurate tally of ttwu_move_affine
  vhost: Fix livepatch timeouts in vhost_worker()
  livepatch,sched: Add livepatch task switching to cond_resched()
  livepatch: Skip task_call_func() for current task
  livepatch: Convert stack entries array to percpu
  sched: Interleave cfs bandwidth timers for improved single thread performance at low utilization
  sched/core: Reduce cost of sched_move_task when config autogroup
  sched/core: Avoid selecting the task that is throttled to run when core-sched enable
  sched/topology: Make sched_energy_mutex,update static